AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

202-5812 PANEL GP-INSTRUMENT -SIDE S/N BXC1-UP; DSX1-UP FLAT GAUGE PANEL AN ATTACHMENT 428D BACKHOE LOADER


OPERATOR STATION
CONSOLE GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
OPERATOR STATION
SEAT GP

BACKHOE LOADER 428D BACKHOE LOADER BXC
 428D Backhoe Loader BXC00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3969 428D BXC   (2003)

OPERATOR STATION

CONSOLE GP
MOUNTING GP-INSTRUMENT PANEL
202-5724 MOUNTING GP-INSTRUMENT PANEL
PANEL GP-INSTRUMENT
184-7898 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
202-5812 PANEL GP-INSTRUMENT
TRIM GP-CAB
164-1370 TRIM GP-CAB
 

#SEBP39691030
 

202-5812: PANEL GP-INSTRUMENT

202-5812 PANEL GP-INSTRUMENT -SIDE
S/N BXC1-UP; DSX1-UP
FLAT GAUGE PANEL
AN ATTACHMENT
i01626248 SEBP3969
2025812 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8858 J [1] SWITCH AS-START (KEY)  
2. 167-8283 [1] PANEL AS-INSTRUMENT  
3. 193-1509 [1] WIRE AS  
4. 191-9104 [1] FILM-INSTRUCTION (START SWITCH)  
5. 9X-2045 M [10] SCREW-TRUSS HEAD (M6X1X20-MM)  
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP39691031
 

243-0059: PEDAL GP-GOVERNOR

243-0059 PEDAL GP-GOVERNOR
S/N BXC1-UP; DSX1-UP
PART OF 234-8892 CONTROL GP-GOVERNOR
AN ATTACHMENT
i02122413 SEBP3969
2430059 PEDAL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-0063 [1] BOOT  
2. 129-3178 M [1] LOCKNUT (M6X1-THD)  
3. 5C-7261 M [1] NUT (M8X1.25-THD)  
4. 5C-9553 M [1] BOLT (M6X1X16-MM)  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 095-0641 M [4] BOLT-SOCKET HEAD (M4X0.7X10-MM)  
7. 3F-9556 [2] LOCKWASHER  
8. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
9. 8T-6902 [3] CLIP  
10. 9X-2842 M [1] BOLT (M8X1.25X45-MM)  
   
    AVAILABLE REPAIR KIT(S):
  164-1154 [1] KIT-SERVICE  
    (INCLUDES CABLE CLAMPS & SCREWS)
  243-0062 [1] KIT-REPAIR (GOVERNOR PEDAL)  
    (INCLUDES SHAFT, CLIP & BEARING)
  M   METRIC PART
 

#SEBP39691032
 

220-2639: SEAT BELT GP

220-2639 SEAT BELT GP
S/N BXC1-UP; DSX1-UP
AN ATTACHMENT
i01709174 SEBP3969
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-8992 M [2] BOLT-LOCKING (M12X1.75X30-MM)  
  7X-0546 [3] WASHER-HARD (12X25.5X2-MM THK)  
  M   METRIC PART
 

#SEBP39691033
 

220-2640: SEAT BELT GP

220-2640 SEAT BELT GP
S/N BXC1-UP; DSX1-UP
AN ATTACHMENT
i01738688 SEBP3969
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-8992 M [2] BOLT-LOCKING (M12X1.75X30-MM)  
  7X-0546 [3] WASHER-HARD (12X25.5X2-MM THK)  
  M   METRIC PART
 

#SEBP39691034
 

164-1210: SEAT GP

164-1210 SEAT GP
S/N BXC1-UP; DSX1-UP
VINYL
PART OF 164-1202 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
i01493742 SEBP3969
1641210 SEAT GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5904 Y [2] ARMREST GP  
2. 105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
3. 164-1214 [4] KNOB  
4. 164-1247 [1] BRACKET AS (RH)  
5. 164-1248 [1] PAN  
6. 164-1249 [1] LEVER AS  
7. 164-1250 [1] HANDLE  
8. 164-1251 [1] SPRING  
9. 164-1252 [1] SPRING  
10. 4B-5271 [4] WASHER (25.5X11.2X2-MM THK)  
11. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
13. 164-1256 [2] SPACER (19X25.4X12.5-MM THK)  
14. 164-1258 [1] BRACKET AS (RH)  
15. 164-1259 [1] BRACKET AS (LH)  
16. 164-1261 [1] BRACKET AS (LH)  
17. 164-1265 [4] BOLT (3/8-16X1.1-IN)  
18. 164-1266 [1] CUSHION AS-BACK  
19. 8T-9501 [2] SCREW (10-16X0.75-IN)  
20. 9X-8873 [2] BOLT (1/2-13X2.25-IN)  
21. 180-5795 [1] CUSHION AS-SEAT  
22. 180-5797 [1] PAN AS  
23. 195-9223 [2] SCREW-PAN HEAD (10-14X0.63-IN)  
24. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
25. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
26. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39691035
 

164-1210: SEAT GP

164-1210 SEAT GP
S/N BXC1-UP; DSX1-UP
VINYL
PART OF 164-1202 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
i02142286 SEBP3969
1641210 SEAT GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
2. 164-1214 [4] KNOB  
3. 164-1247 [1] BRACKET AS (RH)  
4. 164-1248 [1] PAN  
5. 164-1249 [1] LEVER AS  
6. 164-1250 [1] HANDLE  
7. 164-1251 [1] SPRING  
8. 164-1252 [1] SPRING  
12. 164-1256 [2] SPACER (19X25.4X12.5-MM THK)  
13. 164-1258 [1] BRACKET AS (RH)  
14. 164-1259 [1] BRACKET AS (LH)  
15. 164-1261 [1] BRACKET AS (LH)  
16. 164-1265 [4] BOLT (3/8-16X1.1-IN)  
17. 164-1266 [1] CUSHION AS-BACK  
20. 180-5795 [1] CUSHION AS-SEAT  
21. 180-5797 [1] PAN AS  
22. 195-9223 [2] SCREW-PAN HEAD (10-14X0.63-IN)  
23. 220-3790 C [1] ARMREST AS (RH)  
  6A-9083 M [1] SCREW-MACHINE (M6X1X15-MM)  
  [1] PAD AS  
24. 220-3791 C [1] ARMREST AS (LH)  
  6A-9083 M [1] SCREW-MACHINE (M6X1X15-MM)  
  [1] PAD AS  
25. 0S-1595 C [2] BOLT (1/2-13X1.25-IN)  
26. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
27. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
28. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
29. 4B-5271 [4] WASHER (25.5X11.2X2-MM THK)  
30. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
32. 8T-9501 [2] SCREW (10-16X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39691036
 

164-1213: SEAT GP

164-1213 SEAT GP
S/N BXC1-757; DSX1-473
DELUXE
PART OF 164-1203 SEAT GP-SUSPENSION
AN ATTACHMENT
i01493777 SEBP3969
1641213 SEAT GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 4B-4278 [4] WASHER (10.2X20.5X1.6-MM THK)  
3. 6C-3677 [2] RIVET-POP  
4. 8S-7803 [2] RING-RETAINING  
5. 8Y-5904 Y [2] ARMREST GP  
6. 031-4155 [4] LOCKNUT (5/16-18-THD)  
7. 095-0878 [2] PIN-SPRING  
8. 105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
9. 123-6077 [1] SHAFT-PIVOT  
10. 132-9240 [1] LATCH AS  
11. 135-1706 [1] SPRING  
12. 154-8278 [1] SPRING-RETURN (SLIDE)  
13. 154-8280 [1] SPRING-RETURN (SWIVEL)  
14. 154-8284 [1] TUBE  
15. 161-9290 [1] WASHER (11.9X20.7X2.3-MM THK)  
16. 164-1211 [1] LEVER  
17. 164-1212 [1] LEVER  
18. 164-1214 [4] KNOB  
19. 164-1245 [1] CUSHION GP-SEAT  
  164-1269 [1] BOOT  
  164-1270 [3] FASTENER  
  164-1272 [1] ROD AS  
  164-1273 [2] SPRING-EXTENSION  
20. 164-1246 [1] CUSHION AS  
21. 164-1247 [1] BRACKET AS (RH)  
22. 164-1249 [1] LEVER AS  
23. 164-1250 [1] HANDLE  
24. 164-1251 [1] SPRING  
25. 164-1252 [1] SPRING  
29. 164-1256 [2] SPACER (19X25.4X12.5-MM THK)  
30. 164-1257 [1] SPACER (19.4X25.4X15.9-MM THK)  
31. 164-1258 [1] BRACKET AS (RH)  
32. 164-1259 [1] BRACKET AS (LH)  
33. 164-1261 [1] BRACKET AS (LH)  
34. 164-1262 [1] PAN AS  
35. 164-1263 [1] PAN AS  
36. 164-1264 [1] PAN AS  
37. 164-1265 [4] BOLT (3/8-16X1.1-IN)  
38. 164-1271 [2] SPRING  
39. 164-1274 [2] BLOCK  
40. 164-1275 [1] BACKREST AS  
  2W-9499 M [2] BOLT (M6X1X40-MM)  
  8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
41. 164-1276 [2] TUBE  
42. 164-1277 [2] CLIP-SPRING  
43. 164-1295 [1] PLATE AS-SLIDE  
44. 180-5780 [1] LEVER-TILT  
45. 180-5781 [1] ROD  
46. 180-5782 [1] SPRING  
47. 180-5783 [1] FOLLOWER  
48. 180-5784 [1] LATCH AS  
49. 180-5785 [1] SPRING  
51. 180-5787 [1] KNOB  
52. 180-5788 [1] BLOCK  
55. 180-5791 [1] SUPPORT AS-SEAT (LUMBAR)  
56. 195-7055 [8] WASHER-HARD (9.9X28.5X3.2-MM THK)  
57. 195-9223 [4] SCREW-PAN HEAD (10-14X0.63-IN)  
58. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
59. 131-3540 M [12] LOCKNUT (M8X1.25-THD)  
60. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
61. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
62. 2P-7864 [2] SCREW-TAPPING (1/4-14-THD)  
63. 3B-4505 [4] LOCKWASHER  
64. 4B-5271 [4] WASHER (25.5X11.2X2-MM THK)  
65. 4H-1641 [2] PIN-SPRING  
66. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
67. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
68. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
69. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
70. 8T-7566 [1] PIN-SPRING  
71. 9X-8873 [2] BOLT (1/2-13X2.25-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39691037
 

164-1213: SEAT GP

164-1213 SEAT GP
S/N BXC758-UP; DSX474-UP
DELUXE
PART OF 164-1203 SEAT GP-SUSPENSION
AN ATTACHMENT
i02291856 SEBP3969
1641213 SEAT GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 4B-4278 [4] WASHER (10.2X20.5X1.6-MM THK)  
3. 6C-3677 [2] RIVET-POP  
4. 8S-7803 [2] RING-RETAINING  
5. 220-3790 C [1] ARMREST AS (RH)  
  6A-9083 M SCREW-MACHINE (M6X1X15-MM)  
  [1] PAD AS  
6. 031-4155 [4] LOCKNUT (5/16-18-THD)  
7. 095-0878 [2] PIN-SPRING  
8. 105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
9. 123-6077 [1] SHAFT-PIVOT  
10. 132-9240 [1] LATCH AS  
11. 135-1706 [1] SPRING  
12. 154-8278 [1] SPRING-RETURN  
13. 154-8280 [1] SPRING-RETURN  
14. 154-8284 [1] TUBE  
15. 161-9290 [1] WASHER (11.9X20.7X2.3-MM THK)  
16. 164-1211 [1] LEVER (SLIDE)  
17. 164-1212 [1] LEVER (SWIVEL)  
18. 164-1214 [4] KNOB  
19. 164-1245 [1] CUSHION GP-SEAT  
  164-1269 [1] BOOT  
  101-0003 [3] FASTENER  
  164-1272 [1] ROD AS  
  164-1273 [2] SPRING-EXTENSION  
20. 164-1246 [1] CUSHION AS  
21. 164-1247 [1] BRACKET AS (RH)  
22. 164-1249 [1] LEVER AS  
23. 164-1250 [1] HANDLE  
24. 164-1251 [1] SPRING  
25. 164-1252 [1] SPRING  
26. 220-3791 C [1] ARMREST AS (LH)  
  6A-9083 M [1] SCREW-MACHINE (M6X1X15-MM)  
  [1] PAD AS  
29. 164-1256 [2] SPACER (19X25.4X12.5-MM THK)  
30. 0S-1595 C [2] BOLT (1/2-13X1.25-IN)  
31. 164-1258 [1] BRACKET AS (RH)  
32. 164-1259 [1] BRACKET AS (LH)  
33. 164-1261 [1] BRACKET AS (LH)  
34. 164-1262 [1] PAN AS  
35. 164-1263 [1] PAN AS  
36. 164-1264 [1] PAN AS  
37. 164-1265 [4] BOLT (3/8-16X1.1-IN)  
38. 164-1271 [2] SPRING  
39. 164-1274 [2] BLOCK  
40. 164-1275 [1] BACKREST AS  
  2W-9499 M [2] BOLT (M6X1X40-MM)  
  8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
41. 164-1276 [2] TUBE  
42. 164-1277 [2] CLIP-SPRING  
43. 164-1295 [1] PLATE AS-SLIDE  
44. 180-5780 [1] LEVER-TILT  
45. 180-5781 [1] ROD  
46. 180-5782 [1] SPRING  
47. 180-5783 [1] FOLLOWER  
48. 180-5784 [1] LATCH AS  
49. 180-5785 [1] SPRING  
51. 180-5787 [1] KNOB  
52. 180-5788 [1] BLOCK  
55. 180-5791 [1] SUPPORT AS-SEAT (LUMBAR)  
56. 195-7055 [8] WASHER-HARD (9.9X28.5X3.2-MM THK)  
57. 195-9223 [4] SCREW-PAN HEAD (10-14X0.63-IN)  
58. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
59. 131-3540 M [12] LOCKNUT (M8X1.25-THD)  
60. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
61. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
62. 2P-7864 [2] SCREW-TAPPING (1/4-14-THD)  
63. 3B-4505 [4] LOCKWASHER  
64. 4B-5271 [4] WASHER (25.5X11.2X2-MM THK)  
65. 4H-1641 [2] PIN-SPRING  
66. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
67. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
68. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
69. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
70. 8T-7566 [1] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39691038
 

273-5905: SEAT GP

273-5905 SEAT GP -VINYL
S/N BXC1-UP; DSX1-UP
PART OF 206-1791 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
i02432606 SEBP3969
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  164-1258 [1] BRACKET AS (RH)  
  164-1259 [1] BRACKET AS (LH)  
  164-1266 [1] CUSHION AS-BACK  
  260-0058 [1] CUSHION AS-SEAT  
  164-1249 [1] LEVER AS (RECLINER CONTROL)  
  164-1263 [1] PAN AS  
  180-5797 [1] PAN AS  
   
  8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  8T-8917 [2] BOLT (1/2-13X1.25-IN)  
  164-1265 [1] BOLT (3/8-16X1.1-IN)  
  260-0045 [1] BOLT-SPECIAL  
  105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
  260-0027 [1] KNOB-SLIDE  
  260-0028 [1] LEVER-TILT (BOTTOM)  
  3T-0852 M [8] LOCKNUT (M8X1.25-THD)  
  9X-6620 M [1] LOCKNUT (M10X1.5-THD)  
  129-3180 M [2] LOCKNUT (M12X1.75-THD)  
  260-0029 [1] PAN  
  260-0040 [1] PAN  
  180-5781 [1] ROD  
  8T-9501 [2] SCREW (10-16X0.75-IN)  
  8T-6412 M [2] SCREW-MACHINE (M6X1X20-MM)  
  195-9223 [2] SCREW-PAN HEAD (10-14X0.63-IN)  
  164-1256 [2] SPACER (19X25.4X12.5-MM THK)  
  164-1251 [1] SPRING  
  164-1252 [1] SPRING  
  164-1273 [1] SPRING-EXTENSION  
  161-9283 [1] WASHER (19.8X31.8X1.6-MM THK)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP39691039
 

273-5905: SEAT GP

273-5905 SEAT GP -VINYL
S/N BXC1-UP; DSX1-UP
PART OF 206-1791 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
i04905207 SEBP3969
2735905 SEAT GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3481 M [2] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
2. 161-9283 C [3] WASHER (19.8X31.8X1.6-MM THK)  
3. 164-1249 [1] LEVER AS  
4. 164-1250 C [1] HANDLE  
5. 164-1251 [1] SPRING  
6. 164-1252 [1] SPRING  
7. 9X-6620 M [1] LOCKNUT (M10X1.5-THD)  
8. 8T-9501 [2] SCREW (10-16X0.75-IN)  
9. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
10. 164-1258 [1] BRACKET AS (RH)  
11. 164-1259 [1] BRACKET AS (LH)  
12. 164-1266 [1] CUSHION AS-BACK  
13. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 180-5795 C [1] CUSHION AS-SEAT  
15. 180-5797 [1] PAN AS  
16. 195-9223 [2] SCREW-PAN HEAD (10-14X0.63-IN)  
17. 260-0029 [1] PAN  
18. 260-0045 [1] BOLT-SPECIAL  
19. 3T-0852 M [8] LOCKNUT (M8X1.25-THD)  
20. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Vandalism Guard (Rotating Gauge Panel) - If Equipped
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failed Service Meters{7478}
Failed Service Meters{7478}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
Service Letter-Asia
Service Letter-APD
Service Magazine
A New Key Start Switch Is Available For Series D Backhoe Loaders {1408, 1416}
2008/02/04

Caterpillar Parts SIS Catalog 428D :

PANEL GP-INSTRUMENT
184-7898 PANEL GP-INSTRUMENT
MOUNTING GP-INSTRUMENT PANEL
202-5724 MOUNTING GP-INSTRUMENT PANEL
MOTOR GP-WINDOW WIPER
186-2589 MOTOR GP-WINDOW WIPER
MODULE GP-WARNING INDICATOR
223-6539 MODULE GP-WARNING INDICATOR
MODULE GP-WARNING INDICATOR
144-9931 MODULE GP-WARNING INDICATOR
MIRROR GP-REAR VIEW
164-1055 MIRROR GP-REAR VIEW
MIRROR GP-REAR VIEW
122-2054 MIRROR GP-REAR VIEW
LOCK GP-HYDRAULIC FOOT CONTROL
189-3823 LOCK GP-HYDRAULIC FOOT CONTROL
PEDAL GP-GOVERNOR
243-0059 PEDAL GP-GOVERNOR
220-2639 SEAT BELT GP
220-2640 SEAT BELT GP
SEAT GP
164-1210 SEAT GP
SEAT GP
164-1210 SEAT GP
SEAT GP
164-1213 SEAT GP
SEAT GP
164-1213 SEAT GP
273-5905 SEAT GP

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.