AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

122-1645 WIRING GP-KICKOUT & POSITIONER S/N MBM1-UP AN ATTACHMENT 428D BACKHOE LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 428D BACKHOE LOADER MBM
 428D Backhoe Loader MBM00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3970 428D MBM   (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-HEATER
186-2731 WIRING GP-HEATER
WIRING GP-KICKOUT & POSITIONER
122-1644 WIRING GP-KICKOUT & POSITIONER
WIRING GP-KICKOUT & POSITIONER
122-1645 WIRING GP-KICKOUT & POSITIONER
WIRING GP-PLATFORM
186-0304 WIRING GP-PLATFORM
WIRING GP-PLATFORM
242-8521 WIRING GP-PLATFORM
WIRING GP-POWER RECEPTACLE
190-7557 WIRING GP-POWER RECEPTACLE
 

#SEBP39700190
 

122-1645: WIRING GP-KICKOUT & POSITIONER

122-1645 WIRING GP-KICKOUT & POSITIONER
S/N MBM1-UP
AN ATTACHMENT
i00518920 SEBP3970
1221645 WIRING GP-KICKOUT & POSITIONER Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [37] STRAP-CABLE  
2. 118-7790 [1] BRACKET AS  
3. 8T-4138 M [2] BOLT (M6X1X20-MM)  
4. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 107-5605 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)(SENSOR)  
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8737 [11] PLUG-SEAL  
  102-8803 KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-1475 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  8Y-8080 E TUBE-CONVOLUTED (425-CM)  
6. 206-1486 [1] SWITCH AS-ROLLER (KICKOUT, POSITIONER)  
  2H-3922 [1] LOCKWASHER  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  8F-1434 [2] LOCKWASHER  
  9X-0199 [1] BOOT-SWITCH  
7. 7K-1181 [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39700191
 

186-0304: WIRING GP-PLATFORM

186-0304 WIRING GP-PLATFORM -SERVICE
S/N MBM1-UP
PART OF 186-0310 INSTALLATION GP-SECURITY
AN ATTACHMENT
i01410653 SEBP3970
1860304 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 4I-3038 [4] WASHER (3.3X8X0.5-MM THK)  
3. 183-7581 [1] HARNESS AS-PLATFORM (SERVICE CONNECTOR)  
4. 224-6193 M [4] BOLT-SOCKET HEAD (M3X0.5X12-MM)  
5. 8T-2658 M [4] LOCKNUT (M3X0.5-THD)  
  M   METRIC PART
 

#SEBP39700192
 

242-8521: WIRING GP-PLATFORM

242-8521 WIRING GP-PLATFORM
S/N MBM1-UP
PART OF 237-9287 CHASSIS AR
i01993843 SEBP3970
2428521 WIRING GP-PLATFORM Parts scheme 2428521 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5923 D SEAL (.035M)  
2. 5P-7657 D [3] SEAL (.032M EA)  
3. 6K-0806 [8] STRAP-CABLE  
4. 7G-1060 [1] STRAP AS-GROUND  
5. 7T-4848 [1] FLASHER AS (12-VOLT)  
6. 7Y-3883 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
7. 8T-8737 B [15] PLUG-SEAL  
8. 128-4249 [2] LOCKWASHER  
9. 164-1056 [1] CHANNEL  
10. 167-3700 [1] HARNESS AS-PLATFORM  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT INCLUDES PLUG AS., WEDGES, & INTERFACE SEAL)
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
  177-9648 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS., WEDGE, & INTERFACE SEAL)
11. 184-6430 [1] COVER  
12. 211-0052 [2] NUT (1-11/16-18-THD)  
13. 213-6097 [1] HARNESS AS (POWER)  
14. 240-0541 [1] BLOCK AS (FUSE)  
15. 240-0542 [1] BLOCK AS (FUSE)  
16. 095-0733 M [8] SCREW-MACHINE (M4X0.7X40-MM)  
17. 138-8454 M [3] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
18. 102-8802 B [4] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS. & WEDGE)
19. 102-8803 B [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
20. 102-8804 B [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS. & WEDGE)
21. 3S-2093 [26] STRAP-CABLE  
22. 4B-4863 [11] WASHER (4.7X11X1.2-MM THK)  
23. 5C-7261 M [2] NUT (M8X1.25-THD)  
24. 7X-7729 [2] WASHER (11X25X3-MM THK)  
25. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [2] NUT (M10X1.5-THD)  
27. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
28. 8T-4171 M [2] BOLT (M6X1X12-MM)  
29. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
30. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
33. 9X-6772 [3] STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP39700193
 

190-7557: WIRING GP-POWER RECEPTACLE

190-7557 WIRING GP-POWER RECEPTACLE
S/N MBM1-UP
PART OF 214-7008, 214-7009 CAB AR-ENCLOSED ROPS, 190-2802 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i01436952 SEBP3970
1907557 WIRING GP-POWER RECEPTACLE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8490 [1] FUSE (10-AMPERE)  
2. 178-7539 [1] RECEPTACLE AS (POWER SUPPLY)  
3. 3S-2093 [1] STRAP-CABLE  
 

#SEBP39700194
 

185-8807: WIRING GP-REAR

185-8807 WIRING GP-REAR
S/N MBM1-UP
PART OF 237-9287 CHASSIS AR
i01371254 SEBP3970
1858807 WIRING GP-REAR Parts scheme 1858807 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [8] STRAP-CABLE  
2. 7K-1181 [6] STRAP-CABLE  
3. 8T-8737 B [8] PLUG-SEAL  
4. 9U-2277 [1] CLIP AS  
5. 155-8522 B [1] MOUNT  
6. 167-3707 [1] HARNESS AS-REAR  
7. 169-0597 [1] SWITCH AS-ROCKER (SIDE SHIFT LOCK)  
  111-7899 [1] GASKET  
8. 096-4415 [1] LOCKWASHER  
9. 150-4086 BM [1] SCREW (M4X0.7X16-MM)  
10. 102-8802 B [4] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
11. 4P-7428 [1] CLIP (LADDER)  
12. 4P-7581 [2] CLIP (LADDER)  
13. 8T-2659 BM [1] LOCKNUT (M4X0.7-THD)  
14. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39700195
 

186-0311: WIRING GP-RIDE CONTROL

186-0311 WIRING GP-RIDE CONTROL
S/N MBM1-UP
PART OF 239-9400 CONTROL AR-RIDE
AN ATTACHMENT
i01410540 SEBP3970
1860311 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [1] RELAY AS (12-VOLT)  
2. 3S-2093 [18] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
4. 113-8490 [1] FUSE (10-AMPERE)  
5. 131-9203 [1] SWITCH AS-PRESSURE  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 169-0607 [1] SWITCH AS-ROCKER (RIDE CONTROL, STANDARD SHIFT)  
  111-7899 [1] GASKET  
7. 174-6395 [1] HARNESS AS-RIDE CONTROL (FRONT CONSOLE)  
8. 174-6398 [1] HARNESS AS-RIDE CONTROL (PLATFORM)  
9. 200-2996 [1] HARNESS AS-RIDE CONTROL (FRAME, LEFT SIDE)  
10. 138-8454 M [1] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
11. 3J-1907 [1] SEAL-O-RING  
12. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
13. 4P-8134 [1] CLIP (LADDER)  
  M   METRIC PART
 

#SEBP39700196
 

186-0312: WIRING GP-RIDE CONTROL

186-0312 WIRING GP-RIDE CONTROL -AUTOSHIFT
S/N MBM1-UP
PART OF 239-9403 CONTROL AR-RIDE, 239-9410 KIT-RIDE CONTROL
AN ATTACHMENT
i01412546 SEBP3970
1860312 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [1] RELAY AS (12-VOLT)(RIDE CONTROL)  
2. 3S-2093 [18] STRAP-CABLE  
3. 106-8704 [2] SUPPRESSOR AS-ARC  
4. 113-8490 [1] FUSE (10-AMPERE)  
5. 304-5696 [1] SWITCH AS-PRESSURE (RIDE CONTROL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 169-0608 [1] SWITCH AS-ROCKER (RIDE CONTROL, AUTOSHIFT)  
  111-7899 [1] GASKET  
7. 174-6395 [1] HARNESS AS-RIDE CONTROL (FRONT CONSOLE)  
8. 174-6398 [1] HARNESS AS-RIDE CONTROL (PLATFORM)  
9. 200-2996 [1] HARNESS AS-RIDE CONTROL (FRAME, LEFT SIDE)  
10. 138-8454 M [1] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
11. 3J-1907 [1] SEAL-O-RING  
12. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
13. 4P-8134 [1] CLIP (LADDER)  
  M   METRIC PART
 

#SEBP39700197
 

194-1947: WIRING GP-RIDE CONTROL

194-1947 WIRING GP-RIDE CONTROL
S/N MBM1-UP
PART OF 239-9404 CONTROL AR-RIDE
AN ATTACHMENT
i01481445 SEBP3970
1941947 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [3] RELAY AS (12-VOLT)(DEAD ENGINE LOWER,RIDE CONTROL)  
2. 3S-2093 [39] STRAP-CABLE  
3. 106-8704 [2] SUPPRESSOR AS-ARC  
4. 113-8490 [1] FUSE (10-AMPERE)  
5. 131-9203 [1] SWITCH AS-PRESSURE  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 169-0607 [1] SWITCH AS-ROCKER (RIDE CONTROL, STANDARD SHIFT)  
  111-7899 [1] GASKET  
7. 174-6398 [1] HARNESS AS-RIDE CONTROL (PLATFORM)  
8. 194-1937 [1] HARNESS AS-RIDE CONTROL (FRAME, RIGHT SIDE)(DEAD ENGINE LOWER)  
9. 194-1938 [1] HARNESS AS-RIDE CONTROL (SIDE CONSOLE)  
10. 194-1941 [1] HARNESS AS-RIDE CONTROL (FRONT CONSOLE)  
11. 200-2996 [1] HARNESS AS-RIDE CONTROL (FRAME, LEFT SIDE)  
12. 138-8454 M [3] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
13. 3J-1907 [1] SEAL-O-RING  
14. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
15. 4P-8134 [1] CLIP (LADDER)  
  M   METRIC PART
 

#SEBP39700198
 

194-1948: WIRING GP-RIDE CONTROL

194-1948 WIRING GP-RIDE CONTROL -AUTOSHIFT
S/N MBM1-UP
PART OF 239-9405, 239-9413 CONTROL AR-RIDE
AN ATTACHMENT
i01425855 SEBP3970
1941948 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [1] RELAY AS (12-VOLT)(RIDE CONTROL)  
1A. 3E-9362 [1] RELAY AS (12-VOLT)(DEAD ENGINE, LIFT ARM LOWER)  
1B. 3E-9362 [1] RELAY AS (12-VOLT)(DEAD ENGINE, LIFT ARM LOWER)  
2. 3S-2093 B [39] STRAP-CABLE  
3. 106-8704 [2] SUPPRESSOR AS-ARC  
4. 113-8490 [1] FUSE (10-AMPERE)  
5. 304-5696 [1] SWITCH AS-PRESSURE (RIDE CONTROL)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 169-0608 [1] SWITCH AS-ROCKER (RIDE CONTROL, AUTOSHIFT)  
7. 174-6398 [1] HARNESS AS-RIDE CONTROL (PLATFORM)  
8. 194-1937 [1] HARNESS AS-RIDE CONTROL (FRAME, RIGHT SIDE)  
9. 194-1938 [1] HARNESS AS-RIDE CONTROL (SIDE CONSOLE)  
10. 194-1941 [1] HARNESS AS-RIDE CONTROL (FRONT CONSOLE)  
11. 200-2996 [1] HARNESS AS-RIDE CONTROL (FRAME, LEFT SIDE)  
12. 138-8454 M [3] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
13. 3J-1907 [1] SEAL-O-RING  
14. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
15. 4P-8134 [1] CLIP (LADDER)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39700199
 

186-0307: WIRING GP-STABILIZER ALARM

186-0307 WIRING GP-STABILIZER ALARM
S/N MBM1-UP
PART OF 210-8918 STABILIZER AR
AN ATTACHMENT
i01389471 SEBP3970
1860307 WIRING GP-STABILIZER ALARM Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 136-5185 [1] ALARM-WARNING (STABILIZER)  
3. 172-9200 [1] SUPPRESSOR-ARC  
4. 186-0320 [1] HARNESS AS-ALARM (STABILIZER)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  194-5226 [7] WIRE AS (16-GA)  
    -OR-
  194-5227 [7] WIRE AS (14-GA)  
  8L-8413 [17] STRAP-CABLE (WHITE)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  125-7874 D TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  D   ORDER BY THE METER
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054C Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 428D :

WIRING GP-KICKOUT & POSITIONER
122-1644 WIRING GP-KICKOUT & POSITIONER
WIRING GP-HEATER
186-2731 WIRING GP-HEATER
WIRING GP-ENGINE
234-1991 WIRING GP-ENGINE
WIRING GP-CONSOLE
238-1167 WIRING GP-CONSOLE
WIRING GP-CONSOLE
238-1166 WIRING GP-CONSOLE
WIRING GP-CONSOLE
238-1165 WIRING GP-CONSOLE
WIRING GP-CONSOLE
238-1165 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-0309 WIRING GP-CONSOLE
WIRING GP-PLATFORM
186-0304 WIRING GP-PLATFORM
WIRING GP-PLATFORM
242-8521 WIRING GP-PLATFORM
WIRING GP-POWER RECEPTACLE
190-7557 WIRING GP-POWER RECEPTACLE
WIRING GP-REAR
185-8807 WIRING GP-REAR
WIRING GP-RIDE CONTROL
186-0311 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
186-0312 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
194-1947 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
194-1948 WIRING GP-RIDE CONTROL

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.