231-0705 AXLE GP-DRIVE & STEERING S/N MBM1-UP PART OF 237-6463 DRIVE AR-BACKHOE LOADER 428D BACKHOE LOADER



BRAKING SYSTEM
BRAKE GP
POWER TRAIN
TRANSMISSION GP
CLUTCH GP
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP

BACKHOE LOADER 428D BACKHOE LOADER MBM
 428D Backhoe Loader MBM00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3970 428D MBM   (2004)

BRAKING SYSTEM

BRAKE GP
AXLE GP-DRIVE & STEERING
231-0705 AXLE GP-DRIVE & STEERING
AXLE GP-REAR
156-2857 AXLE GP-REAR
HOUSING GP-AXLE
217-2877 HOUSING GP-AXLE
HOUSING GP-AXLE
217-2878 HOUSING GP-AXLE
BRAKE GP-PARKING
129-0138 BRAKE GP-PARKING
 

#SEBP39700200
 

231-0705: AXLE GP-DRIVE & STEERING

231-0705 AXLE GP-DRIVE & STEERING
S/N MBM1-UP
PART OF 237-6463 DRIVE AR-BACKHOE LOADER
i01994447 SEBP3970
2310705 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 154-5404 [2] BEARING  
2. 199-0639 [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
3. 207-4254 M [6] BOLT (M20X1.5X80-MM)  
4. 207-4258 M [2] NUT (M20X1.5-THD)  
5. 219-8798 [2] SEAL-LIP TYPE  
6. 209-9875 [2] DOWEL  
7. 055-1990 [1] VENT  
8. 209-7456 [2] BUSHING  
9. 211-6735 [2] SEAL-O-RING  
10. 214-5097 L [1] CYLINDER GP-STEERING  
11. 152-6144 [3] PLUG AS-DRAIN (MAGNETIC)  
12. 208-0321 [11] BOLT-FLANGE HEAD (M12X1.75X33-MM)  
13. 209-7464 [2] SEAL  
14. 199-0683 M [16] BOLT (M16X2X38-MM)  
15. [2] WASHER (46X66X3-MM THK)  
16. 198-7841 B [8] SHIM (0.15-MM THK)  
17. 198-7842 B [4] SHIM (0.2-MM THK)  
18. 198-7843 B [4] SHIM (0.5-MM THK)  
19. 238-5258 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
20. 210-5942 [2] RING  
21. 209-9883 [1] HOUSING  
22. 461-6187 J [2] SHAFT AS  
23. 209-9886 [2] TIE ROD GP  
    (EACH INCLUDES)
23A. 217-2883 [1] TIE ROD  
23B. 204-3080 [1] BALL JOINT  
23C. 217-2885 [1] NUT (M24X1.5-THD)  
24. 209-9887 [1] BUSHING  
25. 210-5947 [2] WASHER-THRUST (44.6X58X7-MM THK)  
26. 216-7473 [4] PIN AS (LOWER, UPPER)  
    (EACH INCLUDES)
26A. 198-7823 [1] BEARING AS  
26B. 198-7825 [1] SEAL  
26C. 198-7838 [1] PIN  
27. 210-5924 Y [2] PLANETARY GP-FINAL DRIVE  
28. 209-9884 Y [1] HOUSING & FLANGE GP-AXLE (RH)  
29. 209-9885 Y [1] HOUSING & FLANGE GP-AXLE (LH)  
30. 069-4707 [1] SEALANT (GASKET)  
31. 198-7812 [1] ADAPTER-BREATHER  
32. 219-8795 [1] CAP  
   
   
    AVAILABLE REPAIR KIT(S):
  465-2422 J [1] KIT-SPIDER  
    (INCLUDES SPIDER & SNAP RINGS)
  215-2023 L [1] KIT-SEAL  
    (INCLUDES GUIDE RINGS, DUAL RINGS, ROD SEAL, PISTON SEAL, ROD WIPER, & WASHERS)
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39700201
 

156-2857: AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N MBM1-UP
RATIO 18.5
PART OF 237-6463 DRIVE AR-BACKHOE LOADER
i00783340 SEBP3970
1562857 AXLE GP-REAR Parts scheme 1562857 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 118-5837 [2] SHAFT AS  
    (EACH INCLUDES)
1A. 9R-5219 [8] BOLT-SPECIAL  
2. 9R-2407 [1] RETAINER AS  
2A. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
2B. 4K-5843 [1] CUP-BEARING (TAPERED ROLLER)  
3. 156-1928 [1] HOUSING AS (LH)  
3A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
3B. 8S-9151 [1] CUP-BEARING  
3C. [2] STUD  
3D. 156-1930 [1] GEAR-RING (56-TEETH)  
4. [1] HOUSING AS  
4A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
4B. 8S-9151 [1] CUP-BEARING  
4C. [2] STUD  
4D. 156-1930 [1] GEAR-RING (56-TEETH)  
5. 186-4117 [2] CARRIER AS  
    (EACH INCLUDES)
5A. 7T-6652 [1] CONE-BEARING (TAPERED ROLLER)  
5B. 9R-2417 [3] WASHER (33.07X48.38X1.06-MM THK)  
5C. 9R-2418 [6] WASHER (32.94X57.21X0.78-MM THK)  
5D. 9R-2419 [3] KIT-BEARING  
5E. 9R-2420 [1] RETAINER  
5F. 9R-2421 [3] SHAFT  
5G. 186-4118 [3] GEAR-PLANETARY (20-TEETH)  
6. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
7. 9R-0883 [1] PIN  
8. 9R-0823 [1] LEVER AS  
9. 9R-2427 B [1] SHIM (0.965-MM THK)  
  9R-2428 B [1] SHIM (1.118-MM THK)  
  9R-2429 B [1] SHIM (1.27-MM THK)  
  9R-2430 B [1] SHIM (1.422-MM THK)  
  9R-2431 B [1] SHIM (1.575-MM THK)  
  9R-2432 B [1] SHIM (1.727-MM THK)  
  9R-2433 B [1] SHIM (1.88-MM THK)  
  9R-2434 B [1] SHIM (2.032-MM THK)  
10. 9R-2425 [2] WASHER (23.088X69.6X9.52-MM THK)  
11. 156-2572 [1] HOUSING-REAR BRAKE (RH)  
12. 9R-9410 [2] SEAL-REAR BRAKE  
13. 9R-9409 [2] SEAL-REAR BRAKE  
14. 9R-9408 [2] PISTON-REAR BRAKE  
15. 9R-2446 B [1] SPACER (45.86X50.98X31.858-MM THK)  
  9R-2447 B [1] SPACER (45.86X50.98X31.908-MM THK)  
  9R-2448 B [1] SPACER (45.86X50.98X31.959-MM THK)  
  9R-2449 B [1] SPACER (45.86X50.98X32.01-MM THK)  
  9R-2450 B [1] SPACER (45.86X50.98X32.061-MM THK)  
  9R-2451 B [1] SPACER (45.86X50.98X32.112-MM THK)  
  9R-2452 B [1] SPACER (45.86X50.98X32.162-MM THK)  
  9R-2453 B [1] SPACER (45.86X50.98X32.213-MM THK)  
  9R-2454 B [1] SPACER (45.86X50.98X32.264-MM THK)  
  9R-2455 B [1] SPACER (45.86X50.98X32.315-MM THK)  
  9R-2456 B [1] SPACER (45.86X50.98X32.366-MM THK)  
  9R-2457 B [1] SPACER (45.86X50.98X32.416-MM THK)  
  9R-2458 B [1] SPACER (45.86X50.98X32.467-MM THK)  
  9R-2459 B [1] SPACER (45.86X50.98X32.518-MM THK)  
  9R-2460 B [1] SPACER (45.86X50.98X32.569-MM THK)  
16. 230-4017 [8] DISC-BRAKE  
17. 9R-2474 [2] PIN  
18. 9R-9401 [8] PLATE  
19. 8S-4740 [12] BOLT (9/16-12X5-IN)  
20. 9R-9398 [2] MANIFOLD-BRAKE TUBE  
21. 8H-1607 [2] SEAL-O-RING  
22. 9R-2424 [2] GEAR (16-TEETH)  
23. 8M-8157 [4] SEAL-O-RING  
24. 2A-4576 [1] CUP-BEARING (TAPERED ROLLER)  
25. 5L-9656 [1] CONE-BEARING (TAPERED ROLLER)  
26. 9X-8880 [25] BOLT (5/8-11X2-IN)  
27. 9R-2508 [1] HOUSING  
28. 113-1147 [1] FLANGE  
29. 9R-2497 [1] SEAL  
30. 9R-2501 [1] WASHER (32.5X60.5X5.6-MM THK)  
31. 9R-2502 [1] NUT (1-1/4-18-THD)  
32. 3B-5302 [1] PIN-COTTER  
33. 9R-2498 [1] RETAINER  
34. 3B-4509 [6] LOCKWASHER  
35. 3K-3379 [6] BOLT (9/16-12X1-IN)  
36. 9X-8883 [1] BOLT (5/8-11X2.75-IN)  
37. 5L-9018 [4] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
38. 8T-6760 [2] PLUG-PIPE (1-1/2-11-1/2 NPT)  
39. 9R-2499 [1] SEAL AS  
40. 9R-2496 [1] SEAL  
41. 7T-6653 [1] CONE-BEARING (TAPERED ROLLER)  
42. 118-5839 [2] SEAL-REAR AXLE  
43. 9R-2512 [1] SEAL  
44. 030-1957 [2] CONE-BEARING (TAPERED ROLLER)  
45. 7T-6654 [1] CONE-BEARING (TAPERED ROLLER)  
46. 9R-2505 [1] SEAL  
47. 9R-2504 [1] SHAFT  
48. 9R-2507 M [1] SCREW-SPECIAL  
49. 7T-7621 [1] BEARING AS  
50. 9R-2494 [1] RING  
51. 9R-2480 [1] CASE AS  
52. 2S-0480 [1] CUP-TAPERED ROLLER  
53. 2S-0479 [1] CONE-BEARING (TAPERED ROLLER)  
54. 9R-2506 [1] FORK  
55. 9R-2492 [1] WASHER (64.389X78.74X3.124-MM THK)  
56. 9R-2493 [1] RING  
57. 9R-2488 [1] GEAR (16-TEETH)  
58. 9R-2482 [1] COUPLING  
59. 282-9821 [1] HOUSING-BRAKE (LH)  
60. 9R-2486 [1] SPRING  
61. 9R-2483 [1] ADAPTER  
62. 9R-2484 [2] BUSHING-TERMINAL  
63. 9R-2490 [2] WASHER (76.2X101.6X1.524-MM THK)  
64. 9R-2491 [1] SPIDER  
65. 9R-9403 [4] PINION  
66. 9R-2489 [4] WASHER-SPRING  
67. 9R-2485 [8] BOLT (1/2-13X2.87-IN)  
68. 9R-2495 [2] SEAL  
69. 118-9117 [1] GEAR SET  
70. 9R-6671 M [12] BOLT (1/2-20X1.62-IN)  
71. 2M-2570 [12] LOCKNUT (1/2-20-THD)  
72. 9R-2503 [1] BLOCK  
73. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
74. 0T-0318 [2] BOLT (7/16-14X1-IN)  
75. 9R-2487 [1] GEAR (16-TEETH)  
76. 9R-2435 B [2] SPACER (22.86X53.85X1.25-MM THK)  
  9R-2436 B [2] SPACER (22.86X53.85X1.35-MM THK)  
  9R-2437 B [2] SPACER (22.86X53.85X1.45-MM THK)  
  9R-2438 B [2] SPACER (22.86X53.85X1.55-MM THK)  
  9R-2439 B [2] SPACER (22.86X53.85X1.65-MM THK)  
  9R-2440 B [2] SPACER (22.86X53.85X1.75-MM THK)  
  9R-2441 B [2] SPACER (22.86X53.85X1.85-MM THK)  
  9R-2442 B [2] SPACER (22.86X53.85X1.96-MM THK)  
  9R-2443 B [2] SPACER (22.86X53.85X2.06-MM THK)  
  9R-2444 B [2] SPACER (22.86X53.85X2.16-MM THK)  
  9R-2445 B [2] SPACER (22.86X53.85X2.26-MM THK)  
77. 9R-6602 [2] PLUG-MAGNETIC  
78. 5P-0540 [4] NUT-HEX FULL (9/16-18-THD)  
79. 282-9822 [1] HOUSING-BRAKE (RH)  
80. 156-1933 [1] HOUSING-REAR BRAKE (LH)  
81. 9R-2426 [2] LOCK  
82. 9R-2466 M [2] BOLT (7/8-14X2.2-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39700202
 

457-1175: CASE & PARTS GP-PLANETARY

457-1175 CASE & PARTS GP-PLANETARY -4-WHEEL DRIVE
S/N MBM1-UP
PART OF 201-8562 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05848000 SEBP3970
4571175 CASE & PARTS GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 420-7216 Y [1] SHIFT GP-GEAR (2-WHEEL DRIVE)  
2. 457-1176 Y [1] CASE GP-TRANSMISSION  
3. 457-1177 Y [1] CASE GP-TRANSMISSION  
  Y   SEPARATE ILLUSTRATION
 

#SEBP39700203
 

457-1176: CASE GP-TRANSMISSION

457-1176 CASE GP-TRANSMISSION -4-WHEEL DRIVE
S/N MBM1-UP
PART OF 457-1175 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
i05848001 SEBP3970
4571176 CASE GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 4C-9521 [2] CAP-PROTECTIVE  
2. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
3. 6Y-2035 [1] GASKET  
4. 7T-2651 [1] STRAINER-SUCTION  
5. 7T-3051 [1] PLUG  
6. 7T-3253 [2] DOWEL  
7. 9W-5460 [1] RING  
8. 106-9861 [1] PLATE AS-COVER  
9. 120-9762 [4] SEAL-O-RING  
10. 122-3652 [2] PLUG  
11. 123-2920 [1] PLUG  
12. 192-0845 [1] CASE-FRONT TRANSMISSION  
13. 203-3162 [1] CAP  
14. 237-5188 [1] PLUG-EXPANSION  
15. 292-1248 [1] PLUG  
16. 293-8745 [2] PLUG-PROTECTION  
17. 466-4938 [1] SEAL-LIP TYPE  
18. 334-5131 [4] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
19. 344-2608 [1] HOUSING AS-FILTER  
  7T-3119 [1] HOUSING  
  342-3830 [1] ADAPTER  
20. 160-8742 M [4] BOLT (M10X1.5X55-MM)  
21. 6V-7981 M [2] BOLT (M10X1.5X70-MM)  
22. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
23. 4F-7952 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP39700204
 

457-1177: CASE GP-TRANSMISSION

457-1177 CASE GP-TRANSMISSION -4-WHEEL DRIVE
S/N MBM1-UP
PART OF 457-1175 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
i05848002 SEBP3970
4571177 CASE GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 4C-9521 [1] CAP-PROTECTIVE  
2. 6T-9142 B [1] SHIM (0.508-MM THK)  
  6T-9143 B [1] SHIM (0.381-MM THK)  
  6T-9144 B [1] SHIM (0.051-MM THK)  
  6T-9145 B [1] SHIM (0.178-MM THK)  
  6T-9146 B [1] SHIM (0.127-MM THK)  
  6T-9147 B [1] SHIM (0.076-MM THK)  
8. 6T-9163 B [2] SHIM (0.599-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
12. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
13. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
14. 7T-3251 [1] BREATHER (TRANSMISSION)  
15. 104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
19. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
20. 121-7399 B [1] SHIM (0.05-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
24. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
25. 122-3650 [1] PLUG  
26. 123-2918 [2] SLEEVE  
27. 123-2919 M [2] NUT (M11X1-THD)  
28. 156-9275 [1] CASE-REAR TRANSMISSION  
30. 292-1248 [1] PLUG  
31. 293-2147 [1] BREATHER AS (TRANSMISSION)  
  3J-1907 [1] SEAL-O-RING  
  122-6785 [1] PLUG AS  
32. 294-9820 [1] TUBE  
33. 466-4938 [1] SEAL-LIP TYPE  
34. 334-5131 [4] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
36. 6V-5842 M [14] BOLT (M10X1.5X40-MM)  
37. 9X-3985 [1] PLUG-PROTECTION  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39700205
 

454-3437: CLUTCH GP

454-3437 CLUTCH GP -2-WHEEL DRIVE
S/N MBM1-UP
PART OF 201-8562 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05847997 SEBP3970
4543437 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 122-1883 [1] SPACER (38X45X5-MM THK)  
2. 454-3439 Y [1] SHAFT GP-OUTPUT (2-WHEEL DRIVE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP39700206
 

191-9114: CONTROL GP-DIFFERENTIAL LOCK

191-9114 CONTROL GP-DIFFERENTIAL LOCK
S/N MBM1-UP
PART OF 184-7970 POWER TRAIN AR
i01956939 SEBP3970
1919114 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 9R-5567 [1] PLATE AS  
2. 8T-4244 M [1] NUT (M12X1.75-THD)  
3. 5P-0372 [2] LOCK PIN  
4. 8B-1419 [1] PIN-CLEVIS  
5. 191-9113 [1] ROD AS  
6. 8T-4815 C [1] ROD END  
7. 8C-4987 [1] PIN-CLEVIS  
8. 8T-4133 M [1] NUT (M10X1.5-THD)  
9. 9R-3051 [1] ROD  
10. 9R-2806 [1] PIN  
11. 9R-2807 [1] CLIP (RETAINER)  
12. 103-4867 [1] SPRING  
13. 9R-1581 [1] BOOT  
14. 8T-5063 C [1] ROD END  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39700207
 

457-1178: CONTROL GP-TRANSMISSION HYD

457-1178 CONTROL GP-TRANSMISSION HYD -4-WHEEL DRIVE
S/N MBM1-UP
PART OF 201-8562 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05848003 SEBP3970
4571178 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 330-3037 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
2. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
3. 223-8181 Y [1] VALVE GP-SOLENOID (DIRECTION)  
4. 305-3430 [4] PLUG-PROTECTION  
5. 388-8370 [1] VALVE GP-SOLENOID (TRANSMISSION)  
6. 449-8810 M [4] BOLT (M5X0.8X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39700208
 

238-5258: DIFFERENTIAL & BEVEL GEAR GP

238-5258 DIFFERENTIAL & BEVEL GEAR GP
S/N MBM1-UP
PART OF 231-0705 AXLE GP-DRIVE & STEERING
i02005301 SEBP3970
2385258 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 4J-0520 [1] SEAL-O-RING  
2. 216-4457 [1] SEAL  
3. 216-4458 [2] BEARING  
4. 136-7808 [1] BEARING AS-TAPERED ROLLER  
5. 216-4461 [1] BEARING  
6. 209-7454 M [2] NUT (M94X2-THD)  
7. 152-6144 [1] PLUG AS-DRAIN (MAGNETIC)  
8. 209-7462 [2] WASHER (40X50X2-MM THK)  
9. 209-7463 [1] SLEEVE (COLLAPSIBLE)  
10. 199-0695 M [2] BOLT (M6X1X14-MM)  
11. 209-7472 M [1] NUT (M24X1.5-THD)  
12. 216-4465 [1] WASHER (24.5X52X10-MM THK)  
13. 216-4464 [1] YOKE  
14. 199-0858 [2] RETAINER  
15. 216-9498 Y [1] DIFFERENTIAL GP  
16. 238-5257 [1] GEAR GP-BEVEL  
17. 217-2880 [4] DOWEL  
18. 216-5515 [1] CARRIER AS-DIFFERENTIAL  
18A. 208-0322 [4] BOLT-FLANGE HEAD (M14X2X75-MM)  
19. 209-7473 B [1] SHIM (2.5-MM THK)  
  219-8751 B [1] SHIM (2.6-MM THK)  
  219-8752 B [1] SHIM (2.7-MM THK)  
  219-8753 B [1] SHIM (2.8-MM THK)  
  219-8754 B [1] SHIM (2.9-MM THK)  
  219-8755 B [1] SHIM (3-MM THK)  
  219-8756 B [1] SHIM (3.1-MM THK)  
  219-8757 B [1] SHIM (3.2-MM THK)  
  219-8758 B [1] SHIM (3.3-MM THK)  
  219-8759 B [1] SHIM (3.4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39700209
 

216-9498: DIFFERENTIAL GP

216-9498 DIFFERENTIAL GP -AXLE, FRONT
S/N MBM1-UP
PART OF 238-5258 DIFFERENTIAL & BEVEL GEAR GP
i02005424 SEBP3970
2169498 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 211-0092 J [2] WASHER-THRUST (22X42X2-MM THK)  
2. 209-7455 J [1] PIN  
3. 216-8687 [1] COVER  
4. 216-9497 [1] DIFFERENTIAL & BEVEL GEAR GP  
5. 216-8689 [1] HOUSING-DIFFERENTIAL  
6. 216-8691 J [1] RETAINER  
7. 229-5093 J [2] WASHER-THRUST (49X72X1.5-MM THK)  
8. 144-6734 M [12] BOLT (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  216-8700 J [1] KIT-DIFFERENTIAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Caterpillar Parts SIS Catalog 428D :

WIRING GP-STABILIZER ALARM
186-0307 WIRING GP-STABILIZER ALARM
WIRING GP-RIDE CONTROL
194-1948 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
194-1947 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
186-0312 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
186-0311 WIRING GP-RIDE CONTROL
WIRING GP-REAR
185-8807 WIRING GP-REAR
WIRING GP-POWER RECEPTACLE
190-7557 WIRING GP-POWER RECEPTACLE
WIRING GP-PLATFORM
242-8521 WIRING GP-PLATFORM
AXLE GP-REAR
156-2857 AXLE GP-REAR
CASE & PARTS GP-PLANETARY
457-1175 CASE & PARTS GP-PLANETARY
CASE GP-TRANSMISSION
457-1176 CASE GP-TRANSMISSION
CASE GP-TRANSMISSION
457-1177 CASE GP-TRANSMISSION
CLUTCH GP
454-3437 CLUTCH GP
CONTROL GP-DIFFERENTIAL LOCK
191-9114 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
457-1178 CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
238-5258 DIFFERENTIAL & BEVEL GEAR GP

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia