238-6700 PLATE & FILM GP S/N WEP1-UP; TDR1-UP PART OF 237-9290, 237-9291 CHASSIS AR 432D BACKHOE LOADER

Part No	Qty	Parts name
225-4150	[1]	PLATE-SERVICE INFORMATION (MACHINE)
		(CENTERED ON UPPER LH SIDE FRAME RAIL)
239-6989	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(CENTERED ON UPPER RH SIDE FRAME RAIL)
A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		(ON MOUNTING PAD ON LH SIDE OF ENGINE BLOCK)

1P-2807	[4]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		(APPLY TWO FILMS TO THE FRONT SIDE OF THE FRONT AXLE BETWEEN CHASSIS & WHEEL ASSEMBLY ON LH & RH SIDE OF MACHINE)
101-0333	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		(ON BRAKE FLUID RESERVOIR CAP)
159-8033	[1]	FILM-IDENTIFICATION (12-VOLT)
		(ON INSIDE OF BATTERY BOX DOOR CENTERED ABOVE JUMP START WARNING FILM)
199-6245	[1]	FILM-INFORMATION (WATER SEPARATOR)
		(ON SIDE OF FUEL TANK FROM BOTTOM EDGE 40-MM UP & OVER FROM BACK EDGE 20-MM))
7X-7644	[4]	FILM-IDENTIFICATION (TIE-DOWN)
		(APPLY TWO FILMS, ONE ON EACH SIDE OF THE MACHINE ON THE MAIN FRAME NEAR FRONT AXLE SUPPORT NEXT TO THE TIEDOWN HOLES)
224-9855	[1]	FILM-INSTRUCTION (START AID, READ OMM)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
124-2456	[1]	FILM-INSTRUCTION (NO STEP)
		(ON INSIDE BATTERY BOX DOOR WITH BOTTOM EDGE OF DECAL 90-MM FROM TOP EDGE COVER &
		RIGHT SIDE OF DECAL IS 75-MM FROM RIGHT SIDE OF BOX)
7X-3229	[2]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		(ON TIE DOWN/SLING EYE BRACKET ON OUTSIDE OF EACH STABILIZER LEG IMMEDIATELY ABOVE TIEDOWN/SLING BRACKET))
	[1]	FILM-NOTICE
		(ON BACK SURFACE OF RH CONSOLE IN SMOOTH AREA WHICH THE DIMENSIONS ARE 205-MM X 95-MM))
239-9441	[1]	FILM-INFORMATION (ROPS, FOPS, READ OMM)
		(ON THE UPPER REAR SHEET METAL PANEL OF CAB STRUCTURE TO THE RH SIDE. DECAL IS LOCATED
		FROM THE BEND IN THE SHEET METAL 50-MM +/-5 TOWARD THE MACHINE CENTERLINE & FROM THE TOP EDGE 50-MM +/-5)
219-0305	[1]	FILM-WARNING (NO WELD, NO DRILL, READ OMM)
		(ON THE UPPER REAR SHEET METAL PANEL OF CAB STRUCTURE TO THE RH SIDE. DECAL IS LOCATED
		FROM THE BEND IN THE SHEET METAL 50-MM +/-5 TOWARD THE MACHINE CENTERLINE & FROM THE TOP EDGE 50-MM +/-5)
225-0312	[1]	FILM-WARNING (JUMP START, READ OMM, INTL)
		(ON INSIDE OF BATTERY BOX DOOR WITH LOWER EDGE OF FILM 75-MM FROM TOP OF DOOR & RIGHT EDGE OF FILM 260-MM FROM RIGHT
		EDGE OF DOOR. ORIENT FILM SUCH THAT IT CAN BE READ WHEN STANDING ON GROUND FACING BATTERY BOX)
226-1240	[1]	FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL)
		(ON BOOM 700-MM +/-5 UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & 65-MM +/-5 OVER FROM INSIDE OF THE REAR EDGE
		OF BOOM WRAPPER PLATE)
239-9430	[1]	FILM-WARNING (ARM BRACE, READ OMM, INTL)
		(FOR SINGLE TILT MACHINES: ON LEFT HAND SIDE OF THE MACHINE ON LIFT ARM CENTERED ABOVE LIFT ARM SAFETY BRACE UP 25-MM
		FROM BOTTOM EDGE OF LIFT ARM. DECAL TOP BOTTOM EDGE MUST BE PARALLEL WITH & ONE DECAL HEIGHT FROM LIFT ARM BOTTOM EDGE
		FOR PARALLEL LIFT MACHINES: ON LH SIDE OF THE MACHINE ON LIFT ARM)
240-7095	[2]	FILM-WARNING (NO ENTRANCE, EXIT, READ OMM)
		(FOR CENTER PIVOT MACHINES: ON THE CAB STRUCTURE IN THE REAR AT THE BOTTOM 40-MM +/-5 FROM BOTTOM EDGE & 165-MM +/-5
		FROM OUTER EDGE FOR EACH FILM - FOR SIDESHIFT MACHINES: ONE DECAL ON EACH POST ON THE SLIDEFRAME CENTRALIZED &
		25-MM +/-5 DOWN FROM TOP HITCH PLATE)
221-8045	[1]	FILM-WARNING (SEAT BELT, INTERNATIONAL)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
240-7957	[1]	FILM-WARNING (DO NOT OPERATE, READ OMM, INTL)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
225-4257	[2]	FILM-WARNING (HOT FLUID UNDER PRESS)
		(ON BOTH SIDES OF FRONT BAFFLE PLATE ON LH SIDE OF THE MACHINE. LOCATE 35-MM +/-5 FROM BOTTOM OF BAFFLE PLATE &
		65-MM +/-5 FROM SIDE FRAME RAIL)
A		NOT PART OF THIS GROUP

#SEBP39711021

243-1022: SERVICE GP-FILTER

SERVICE GP-FILTER

243-1022 SERVICE GP-FILTER -KIT
S/N WEP1-UP; TDR1-UP
AN ATTACHMENT

i02017463 SEBP3971

For full view, you need register

Parts for your 432D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-2326	[1]	FILTER AS-ENGINE OIL
228-9130	[1]	FILTER AS-WATER SEP & FUEL

119-4740	[1]	FILTER-OIL (STANDARD EFFICIENCY)(HYDRAULIC)
126-1817	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)

#SEBP39711022

124-5525: TRANSPORT GP-MACHINE

TRANSPORT GP-MACHINE

124-5525 TRANSPORT GP-MACHINE
S/N WEP1-UP; TDR1-UP
Type 1
AN ATTACHMENT

i00517690 SEBP3971

1245525 TRANSPORT GP-MACHINE Parts scheme

For full view, you need register

Parts for your 432D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-5322	[2]	PIN-COTTER
2.	9R-4066 B	[8]	WASHER (61X98X4-MM THK)
3.	120-9332	[2]	BLOCK
4.		[1]	TUBE
5.		[2]	PLATE AS
6.	111-4335 B	[4]	SPACER (46X63.5X27.1-MM THK)
7.	034-1432	[2]	STRAP-CABLE
	B		USE AS REQUIRED

#SEBP39711023

124-5525: TRANSPORT GP-MACHINE

TRANSPORT GP-MACHINE

124-5525 TRANSPORT GP-MACHINE
S/N WEP1-UP; TDR1-UP
Type 2
AN ATTACHMENT

i04854409 SEBP3971

For full view, you need register

Parts for your 432D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-1510 C	[8]	WASHER (51X82X4-MM THK)
2.	111-4335 C	[2]	SPACER (46X63.5X27.1-MM THK)
3.	C	[2]	TUBE
4.		[2]	PLATE AS
5.	3B-5322 C	[4]	PIN-COTTER
6.	C	[1]	BLOCK
	C		CHANGE FROM PREVIOUS TYPE