AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-8801 WIRING GP-CAB S/N DBL1-UP STANDARD PART OF 240-0076, 240-0077, 240-0078, 240-0079 CAB AR-ENCLOSED ROPS AN ATTACHMENT 446D


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 446D BACKHOE LOADER DBL
 446D Backhoe Loader DBL00001-UP (MACHINE) POWERED BY 3114 Engine SEBP3972 446D DBL   (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-AUTOSHIFT
240-8913 WIRING GP-AUTOSHIFT
WIRING GP-AUTOSHIFT
240-8913 WIRING GP-AUTOSHIFT
WIRING GP-CAB
185-8801 WIRING GP-CAB
WIRING GP-CAB
185-8802 WIRING GP-CAB
WIRING GP-CAB
186-0306 WIRING GP-CAB
WIRING GP-CONSOLE
169-0625 WIRING GP-CONSOLE
 

#SEBP39720120
 

185-8801: WIRING GP-CAB

185-8801 WIRING GP-CAB
S/N DBL1-UP
STANDARD
PART OF 240-0076, 240-0077, 240-0078, 240-0079 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01912600 SEBP3972
1858801 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 8E-1118 [1] ANTENNA AS  
3. 8R-6111 [1] CABLE AS-COAXIAL  
4. 113-8492 [2] FUSE (20-AMPERE)  
5. 141-2759 [1] FUSE (5-AMPERE)  
6. 146-9439 [1] RELAY AS (12-VOLT)  
7. 169-0596 [1] SWITCH AS-ROCKER (REAR WASHER, WIPER)  
  111-7899 [1] GASKET  
8. 179-1215 [1] HARNESS AS-CAB (UPPER CAB CONTROLS)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [5] PLUG-SEAL  
  180-9340 [19] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [57] STRAP-CABLE (WHITE)  
  097-7234 [2] TERMINAL-BLADE (18-GA TO 22-GA)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  124-8616 [2] TERMINAL-RECEPTACLE (18-GA TO 22-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 246-2671 [1] SWITCH AS-MULTIFUNCTION (HD LIGHT, TURN SIG, WDO WIPER)  
11. 4P-8134 [1] CLIP (LADDER)  
12. 8T-0352 M [2] BOLT (M5X0.8X45-MM)  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [2] NUT (M10X1.5-THD)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39720121
 

185-8802: WIRING GP-CAB

185-8802 WIRING GP-CAB -CANOPY
S/N DBL1-UP
PART OF 240-0072, 240-0073 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i01376513 SEBP3972
1858802 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-4894 [1] SWITCH AS-ROCKER (TURN SIGNAL)  
  111-7899 [1] GASKET  
2. 164-1601 [1] BRACKET  
3. 183-4492 [1] HARNESS AS-OPERATOR CONTROLS (TURN SIGNAL)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  111-7898 [1] CONNECTOR (8-PIN)  
  8T-8737 [9] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [2] STRAP-CABLE (WHITE)  
  091-2436 [4] TERMINAL-BLADE (18-GA TO 22-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
4. 125-3298 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39720122
 

186-0306: WIRING GP-CAB

186-0306 WIRING GP-CAB
S/N DBL1-UP
PART OF 240-0060 CHASSIS AR
i01366835 SEBP3972
1860306 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8491 [1] FUSE (15-AMPERE)  
2. 146-9439 B [1] RELAY AS (12-VOLT)  
3. 169-0595 [1] SWITCH AS-ROCKER (BEACON)  
  111-7899 [1] GASKET  
4. 178-7539 [1] RECEPTACLE AS (POWER SUPPLY)  
5. 179-5435 [1] FLANGE  
6. 3E-6922 [2] SCREW-RECESS FLAT HEAD (6-19X0.5-IN)  
  B   USE AS REQUIRED
 

#SEBP39720123
 

169-0625: WIRING GP-CONSOLE

169-0625 WIRING GP-CONSOLE -FRONT
S/N DBL1-352
BASIC
PART OF 239-9534 WIRING GP-CONSOLE
i01348044 SEBP3972
1690625 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 144-9931 Y [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
3. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
4. 167-3701 [1] HARNESS AS-CONSOLE  
5. 169-0587 [1] SWITCH AS-ROCKER (HORN)  
  111-7899 [1] GASKET  
6. 169-0588 [1] SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK)  
  111-7899 [1] GASKET  
7. 229-8182 [1] SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)  
  111-7899 [1] GASKET  
8. 187-1644 [7] PLUG  
9. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
10. 099-0492 M [2] LOCKNUT (M6X1-THD)  
11. 116-7491 [2] ANCHOR  
12. 205-7700 [1] KIT-SERVICE METER  
    (INCLUDES FILM & METER)
13. 188-0863 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)  
14. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39720124
 

169-0625: WIRING GP-CONSOLE

169-0625 WIRING GP-CONSOLE -FRONT
S/N DBL353-UP
BASIC
PART OF 239-9534 WIRING GP-CONSOLE
i02229918 SEBP3972
1690625 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [6] STRAP-CABLE  
2. 223-6542 [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  232-4706 [1] GASKET  
3. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
4. 167-3701 [1] HARNESS AS-CONSOLE  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 169-0587 [1] SWITCH AS-ROCKER (HORN)  
  111-7899 [1] GASKET  
6. 169-0588 [1] SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK)  
  111-7899 [1] GASKET  
7. 229-8182 [1] SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)  
  111-7899 [1] GASKET  
8. 187-1644 [7] PLUG  
9. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
10. 099-0492 M [2] LOCKNUT (M6X1-THD)  
11. 116-7491 [2] ANCHOR  
12. 268-1964 C [1] KIT-SERVICE METER  
    (KIT SERVICES FILM & METER)
13. 188-0863 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)  
14. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39720125
 

186-0309: WIRING GP-CONSOLE

186-0309 WIRING GP-CONSOLE -FRONT, ALL WHEEL DRIVE
S/N DBL1-UP
PART OF 240-0056 POWER TRAIN AR
AN ATTACHMENT
i01389891 SEBP3972
1860309 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 106-8704 [1] SUPPRESSOR AS-ARC  
3. 141-2759 [1] FUSE (5-AMPERE)  
4. 146-9439 [1] RELAY AS (12-VOLT)  
5. 169-0598 [1] SWITCH AS-ROCKER (ALL WHEEL DRIVE)  
  111-7899 [1] GASKET  
 

#SEBP39720126
 

239-9534: WIRING GP-CONSOLE

239-9534 WIRING GP-CONSOLE
S/N DBL1-663
PART OF 240-0060 CHASSIS AR
i01984561 SEBP3972
2399534 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 115-1615 [1] RELAY AS (12-VOLT)  
3. 117-9080 [1] SWITCH GP-MAGNETIC (12-VOLT)  
4. 144-9933 Y [1] LAMP GP-PANEL ILLUMINATION  
5. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
6. 168-7557 [1] SWITCH AS-PRESSURE  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
7. 169-0625 Y [1] WIRING GP-CONSOLE (FRONT)  
8. 241-0948 [1] HARNESS AS-PANEL  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG & WEDGE)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG & WEDGE)
9. 242-0134 [1] FILM-IDENTIFICATION (446D)  
10. 138-7009 [1] TIMER AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
11. 1H-4393 [2] LOCKWASHER  
12. 3J-1907 [1] SEAL-O-RING  
13. 3S-2093 [25] STRAP-CABLE  
14. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
15. 5C-8312 M [2] NUT (M4X0.7-THD)  
16. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
17. 8C-4110 [1] RESISTOR  
18. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
19. 8T-4138 M [3] BOLT (M6X1X20-MM)  
20. 8T-4753 M [2] SCREW (M5X0.8X20-MM)  
21. 8T-4754 M [1] SCREW (M4X0.7X60-MM)  
22. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39720127
 

239-9534: WIRING GP-CONSOLE

239-9534 WIRING GP-CONSOLE
S/N DBL664-UP
PART OF 240-0060 CHASSIS AR
i02605371 SEBP3972
2399534 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 115-1615 [1] RELAY AS (12-VOLT)(FUEL SHUTDOWN)  
3. 117-9080 [1] SWITCH GP-MAGNETIC (12-VOLT)(JUNCTION BOX)  
4. 223-6540 C [1] LAMP GP-PANEL ILLUMINATION (12-VOLT)(PANEL ILLUMINATION)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
6. 168-7557 [1] SWITCH AS-PRESSURE (BRAKE)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)(14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
7. 169-0625 Y [1] WIRING GP-CONSOLE (FRONT)  
8. 241-0948 [1] HARNESS AS-PANEL  
  3E-5519 [1] PLUG AS-CONNECTOR (5-PIN)  
  8L-8413 [12] STRAP-CABLE (WHITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 242-0134 [1] FILM-IDENTIFICATION (446D)  
10. 138-7009 [1] TIMER AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 1H-4393 [2] LOCKWASHER  
12. 3J-1907 [1] SEAL-O-RING  
13. 3S-2093 [25] STRAP-CABLE  
14. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
15. 5C-8312 M [2] NUT (M4X0.7-THD)  
16. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
17. 8C-4110 [1] RESISTOR  
18. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
19. 8T-4138 M [3] BOLT (M6X1X20-MM)  
20. 8T-4753 M [2] SCREW (M5X0.8X20-MM)  
21. 8T-4754 M [1] SCREW (M4X0.7X60-MM)  
22. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39720128
 

240-4714: WIRING GP-CONSOLE

240-4714 WIRING GP-CONSOLE -SIDE
S/N DBL1-474
PART OF 240-0060 CHASSIS AR
i01988159 SEBP3972
2404714 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 7K-1181 [1] STRAP-CABLE  
3. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
4. 169-0586 [1] SWITCH AS-ROCKER (STARTING AID)  
  111-7899 [1] GASKET  
5. 170-6308 [1] TACHOMETER AS  
  4B-2043 [6] NUT (8-32-THD)  
  9B-7233 [6] LOCKWASHER  
  122-7137 [1] LAMP (12-VOLT)  
6. 172-9200 [1] SUPPRESSOR-ARC  
7. 184-5293 [1] PLUG  
8. 187-1644 [6] PLUG  
9. 189-0148 [1] MODULE GP-WARNING INDICATOR  
10. 194-4414 [1] HARNESS AS-PANEL  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
11. 226-7164 [1] GAUGE GP-COOLANT TEMPERATURE  
  4B-2043 [6] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
12. 241-8410 [1] HARNESS AS-PANEL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
13. 3E-6449 [1] SWITCH AS-TEMPERATURE (HYDRAULIC OIL)  
14. 095-0741 M [1] SCREW-MACHINE (M6X1-THD)  
15. 116-7491 [1] ANCHOR  
16. 131-1424 [1] SEAL  
17. 134-2305 [4] SEAL  
18. 170-6305 [1] GAUGE GP-FUEL LEVEL (FUEL LEVEL)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
19. 170-6309 [1] VOLTMETER GP  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
20. 170-6542 [1] GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
21. 172-6224 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)  
22. 189-4920 [1] RELAY AS-TIMER (12-VOLT)  
23. 205-4286 [1] HARNESS AS-PANEL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
24. 3S-2093 [16] STRAP-CABLE  
25. 6K-0806 [4] STRAP-CABLE  
26. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
  M   METRIC PART
 

#SEBP39720129
 

240-4714: WIRING GP-CONSOLE

240-4714 WIRING GP-CONSOLE -SIDE
S/N DBL475-UP
PART OF 240-0060 CHASSIS AR
i02416294 SEBP3972
2404714 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 446D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 7K-1181 [1] STRAP-CABLE  
3. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
4. 169-0586 [1] SWITCH AS-ROCKER (STARTING AID)  
5. 170-6308 [1] TACHOMETER AS  
  122-7137 [1] LAMP (12-VOLT)  
  131-1424 [1] SEAL  
  4B-2043 [6] NUT (8-32-THD)  
  9B-7233 [6] LOCKWASHER  
  122-7137 [1] LAMP (12-VOLT)  
6. 172-9200 [1] SUPPRESSOR-ARC  
7. 184-5293 B [1] PLUG  
8. 187-1644 B [6] PLUG  
9. 223-6541 [1] MODULE GP-WARNING INDICATOR  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  232-4707 [1] GASKET  
  186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
10. 194-4414 [1] HARNESS AS-PANEL  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
11. 226-7164 [1] GAUGE GP-COOLANT TEMPERATURE  
  4B-2043 [6] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
12. 241-8410 [1] HARNESS AS-PANEL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
13. 243-5940 C [1] SWITCH AS-TEMPERATURE (HYDRAULIC OIL)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
14. 095-0741 M [1] SCREW-MACHINE (M6X1-THD)  
15. 116-7491 [1] ANCHOR  
16. 131-1424 [1] SEAL  
17. 134-2305 [4] SEAL  
18. 170-6305 [1] GAUGE GP-FUEL LEVEL (FUEL LEVEL)  
19. 170-6309 [1] VOLTMETER GP  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
20. 170-6542 [1] GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
21. 172-6224 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)  
22. 189-4920 [1] RELAY AS-TIMER (12-VOLT)  
23. 205-4286 [1] HARNESS AS-PANEL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
24. 3S-2093 [16] STRAP-CABLE  
25. 6K-0806 [4] STRAP-CABLE  
26. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 446D :

WIRING GP-AUTOSHIFT
240-8913 WIRING GP-AUTOSHIFT
WIRING GP-AUTOSHIFT
240-8913 WIRING GP-AUTOSHIFT
WIRING GP-AIR CONDITIONER
240-0087 WIRING GP-AIR CONDITIONER
STARTING MOTOR GP-ELECTRIC
7E-4834 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
111-9860 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
111-9860 STARTING MOTOR GP-ELECTRIC
STARTING AID GP-ETHER
138-6923 STARTING AID GP-ETHER
STARTING AID GP
134-5332 STARTING AID GP
WIRING GP-CAB
185-8802 WIRING GP-CAB
WIRING GP-CAB
186-0306 WIRING GP-CAB
WIRING GP-CONSOLE
169-0625 WIRING GP-CONSOLE
WIRING GP-CONSOLE
169-0625 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-0309 WIRING GP-CONSOLE
WIRING GP-CONSOLE
239-9534 WIRING GP-CONSOLE
WIRING GP-CONSOLE
239-9534 WIRING GP-CONSOLE
WIRING GP-CONSOLE
240-4714 WIRING GP-CONSOLE

Truck sale:

Caterpillar 446D
 
Caterpillar 446D
- backhoe loader
MILTON CAT
Caterpillar 446D, baggerlader, Bau-Und Bergbauausrüstung
25.715 
Caterpillar 446D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
MILTON CAT
Caterpillar 446D, Construction
32,000 
Caterpillar 446D, Construction
- backhoe loader
QUINN COMPANY
Caterpillar 446D, Construction
31,000 
Caterpillar 446D, Construction
- backhoe loader
H.O. PENN MACHINERY CO., INC.
Caterpillar 446D, Construction
45,459 
Caterpillar 446D, Construction
- backhoe loader
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.