BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
VALVE MECHANISM GP#SEBP39750030
6I-4424: COVER GP-VALVE MECHANISM
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8633 | [2] | COVER-VALVE MECHANISM | |
| 2. | 9Y-2988 | [1] | BREATHER AS (CRANKCASE) | |
| 3. | 9L-8925 | [18] | BOLT (5/16-18X1.25-IN) | |
| 4. | 5P-5678 BD | SEAL | ||
| 5. | 103-1271 | [1] | COVER AS-VALVE | |
| 6. | 272-2583 | [1] | SEAL-O-RING | |
| 7. | 7C-6514 | [1] | ADAPTER | |
| 8. | 4F-7390 | [1] | SEAL-O-RING | |
| 9. | 2N-8109 | [1] | CLAMP | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP39750031
430-2593: CRANKSHAFT AS
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS#SEBP39750032
6I-1001: CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 253-1752 J | [2] | PLATE-THRUST | |
| 2. | 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | |
| 3. | 211-0592 | [7] | BEARING-MAIN (STANDARD) | |
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4. | 6I-1453 | [1] | CRANKSHAFT AS | |
| 4A. | 1W-9302 | [1] | GEAR-CRANKSHAFT (80-TEETH) | |
| 4B. | 4N-0684 | [1] | DOWEL | |
| 4C. | 7S-5005 | [1] | DOWEL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 243-6718 AJ | [1] | KIT-CRANKSHAFT BEARING | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP39750033
6I-1001: CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
S/N 9NN445-UP
S/N 9NN445-UP
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 253-1752 | [2] | PLATE-THRUST | |
| 2. | 319-7401 Y | [1] | SEAL GP-CRANKSHAFT (FRONT) | |
| 3. | 211-0592 | [7] | BEARING-MAIN (STANDARD) | |
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4. | 430-2593 Y | [1] | CRANKSHAFT AS | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39750034
108-3919: CYLINDER BLOCK AS
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS#SEBP39750035
125-0835: CYLINDER BLOCK AS
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS#SEBP39750036
107-2232: CYLINDER BLOCK GP
107-2232 CYLINDER BLOCK GP
S/N 9NN1-415
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
S/N 9NN1-415
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-3851 | [6] | JET AS-PISTON COOLING | |
| 2. | 108-3919 Y | [1] | CYLINDER BLOCK AS | |
| 3. | 5N-2126 | [1] | CONNECTOR (THERMOCOUPLE) | |
| 4. | 6V-5048 | [1] | SEAL-O-RING | |
| 5. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 6. | 9X-7378 | [1] | SEAL-O-RING | |
| 7. | 100-7399 | [1] | PLUG | |
| 8. | 3E-6747 | [1] | SEAL-O-RING | |
| 9. | 1S-9540 | [1] | DOWEL | |
| 10. | 5P-0840 | [1] | SEAL-O-RING | |
| 11. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 12. | 6I-1055 | [1] | DOWEL | |
| 13. | 2M-6471 | [1] | PLUG-CUP | |
| 14. | 4N-0683 | [4] | DOWEL | |
| 15. | 4N-1650 | [1] | DOWEL | |
| 16. | 6I-4421 | [1] | PLATE-SPACER | |
| 17. | 6I-4422 | [1] | GASKET-PLATE | |
| 18. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 19. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 20. | 114-4427 | [1] | SEAL-O-RING | |
| 21. | 8T-6767 | [5] | PLUG-PIPE (3/8-18-THD) | |
| 22. | 7E-6479 | [6] | BOLT-SPECIAL (OIL JET) | |
| 23. | 3E-7570 | [1] | SENSOR GP-PRESSURE (OIL) | |
| 24. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8813 | [1] | SEAL | ||
| 25. | 3E-3368 | [1] | WEDGE-PLUG LOCK (3-PIN) | |
| 26. | 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 27. | 9X-1813 BE | SLEEVE | ||
| 28. | 3B-7722 | [1] | BUSHING-PIPE | |
| 7M-7456 B | COMPOUND-BEARING MOUNT (50-ML TUBE) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39750037
108-2111: CYLINDER BLOCK GP
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6757 | [1] | PLUG-PIPE | |
| 2. | 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | |
| 3. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 4. | 2M-6471 | [1] | PLUG-CUP | |
| 5. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 6. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 7. | 2M-9780 | [1] | SEAL-O-RING | |
| 8. | 8T-6767 | [6] | PLUG-PIPE (3/8-18-THD) | |
| 9. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 10. | 3J-7354 | [1] | SEAL-O-RING | |
| 11. | 100-7399 | [1] | PLUG | |
| 12. | 3E-6747 | [1] | SEAL-O-RING | |
| 13. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
| 14. | 4N-5857 | [7] | CAP-CRANKSHAFT BEARING |
#SEBP39750038
125-0512: CYLINDER BLOCK GP
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6757 | [1] | PLUG-PIPE | |
| 2. | 125-0835 Y | [1] | CYLINDER BLOCK AS | |
| 3. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 4. | 2M-6471 | [1] | PLUG-CUP | |
| 5. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 6. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 7. | 114-4427 | [1] | SEAL-O-RING | |
| 8. | 8T-6767 | [6] | PLUG-PIPE (3/8-18-THD) | |
| 9. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 10. | 9X-7378 | [1] | SEAL-O-RING | |
| 11. | 100-7399 | [1] | PLUG | |
| 12. | 3E-6747 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39750039
133-3485: CYLINDER BLOCK GP
Parts for your 3406E GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6757 | [1] | PLUG-PIPE | |
| 2. | 3E-6747 | [1] | SEAL-O-RING | |
| 3. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 4. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 5. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 6. | 114-4427 | [1] | SEAL-O-RING | |
| 7. | 7X-7732 | [6] | PLUG-PIPE | |
| 8. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 9. | 9X-7378 | [1] | SEAL-O-RING | |
| 10. | 100-7399 | [1] | PLUG | |
| 11. | 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | |
| 12. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
| 13. | 4N-5857 | [7] | CAP-CRANKSHAFT BEARING |
Information:
BASIC ENGINE
VALVE MECHANISM GP
Engine News
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
The Proper Torque for the Intake Valve Actuation Piston Jam Nut on Certain C15 and C18 Engines {1130}
The Proper Torque for the Intake Valve Actuation Piston Jam Nut on Certain C15 and C18 Engines {1130}
The Proper Torque for the Intake Valve Actuation Piston Jam Nut on Certain C15 and C18 Engines {1130}
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
Service Letter-APD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
