AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

223-7263 CYLINDER HEAD AS S/N 9NN445-UP WITH PRE-FINISHED VALVE SEAT INSERTS PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP 3406E


BASIC ENGINE
CYLINDER HEAD GP

GEN SET ENGINE 3406E GEN SET ENGINE 9NN
 3406E Generator Set Engine 9NN00001-UP SEBP3975 3406E 9NN   (1996)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
122-8042 CYLINDER HEAD AS
CYLINDER HEAD AS
142-7339 CYLINDER HEAD AS
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
 

#SEBP39750050
 

223-7263: CYLINDER HEAD AS

223-7263 CYLINDER HEAD AS
S/N 9NN445-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
i01877339 SEBP3975
2237263 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 280-3979 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
4. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
5. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
8. 166-2904 [12] SEAL-O-RING  
9. 3B-0623 [17] PLUG-CUP  
10. 3B-0645 [20] PLUG-CUP  
11. 8T-6757 [3] PLUG-PIPE  
12. 9X-7430 [6] SEAL-O-RING  
13. 493-9591 [1] HEAD-CYLINDER  
  448-3297 [1] HEAD-CYLINDER  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP39750051
 

243-0943: CYLINDER HEAD AS

243-0943 CYLINDER HEAD AS
S/N 9NN445-UP
PART OF 243-6741 CYLINDER HEAD AS
i01983776 SEBP3975
2430943 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-7582 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  167-0642 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  170-4737 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
2. 175-3617 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  167-0643 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  170-4738 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP39750052
 

243-6741: CYLINDER HEAD AS

243-6741 CYLINDER HEAD AS
S/N 9NN445-UP
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
i01983686 SEBP3975
2436741 CYLINDER HEAD AS Parts scheme 2436741 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 227-4239 [6] SLEEVE-INJECTOR  
4. 243-0943 Y [1] CYLINDER HEAD AS  
    -OR-
  223-7263 Y [1] CYLINDER HEAD AS  
5. 166-2903 [6] SEAL-O-RING  
6. 166-2904 [6] SEAL-O-RING  
7. 3B-0623 [17] PLUG-CUP  
8. 3B-0645 [20] PLUG-CUP  
9. 8T-6757 [3] PLUG-PIPE  
10. 9X-7430 [6] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750053
 

245-4324: CYLINDER HEAD AS

245-4324 CYLINDER HEAD AS
S/N 9NN437-UP
PART OF 183-5296 CYLINDER HEAD GP
i03949631 SEBP3975
2454324 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 9X-7430 [6] SEAL-O-RING  
3. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
4. 224-3983 [12] INSERT-SEAT (INLET)(STANDARD)  
  314-3063 AB INSERT-VALVE SEAT (0.55-MM THK)  
  314-3064 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  314-3065 AB INSERT-VALVE SEAT (0.13-MM OS)  
  314-3066 AB INSERT-VALVE SEAT (0.26-MM OS, INLET)  
  314-3067 AB INSERT-VALVE SEAT (0.26-MM OS)  
  314-3068 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  314-3069 AB INSERT-VALVE SEAT (0.51-MM OS)  
5. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
6. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
7. 166-2904 [12] SEAL-O-RING  
8. 3B-0623 [17] PLUG-CUP  
9. 3B-0645 [20] PLUG-CUP  
10. 8T-6757 [3] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP39750054
 

122-7026: CYLINDER HEAD GP

122-7026 CYLINDER HEAD GP
S/N 9NN1-415
PART OF 129-0426 CYLINDER HEAD GP
i00521147 SEBP3975
1227026 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-8042 Y [1] CYLINDER HEAD AS  
2. 108-5910 [12] VALVE-INLET  
3. 108-5911 [12] VALVE-EXHAUST  
4. 6I-0928 [24] WASHER-SPECIAL  
5. 102-7665 [24] SPRING-VALVE  
6. 4P-4962 [24] ROTOCOIL AS  
7. 4P-4661 [48] LOCK-VALVE  
8. 102-6229 [24] SEAL-VALVE STEM  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750055
 

129-0426: CYLINDER HEAD GP

129-0426 CYLINDER HEAD GP
S/N 9NN1-415
i00522347 SEBP3975
1290426 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  112-4550 E SLEEVE (31CM)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
2. 111-2351 C [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (34CM)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 6I-4420 [1] GASKET-CYLINDER HEAD  
5. 122-7026 Y [1] CYLINDER HEAD GP  
6. 107-5670 [6] SLEEVE AS  
7. 3E-6772 [24] SEAL (WATER)  
8. 124-1855 [16] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
9. 6V-5048 [1] SEAL-O-RING  
10. 6V-5049 [5] SEAL-O-RING  
11. 124-1854 [10] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
12. 5H-1504 [26] WASHER-HARD (20X33.5X5-MM THK)  
13. 8L-2786 [1] SEAL-O-RING  
14. 2P-8421 [1] ADAPTER-O-RING  
15. 008-6817 [1] ELBOW  
16. 9S-8004 [3] PLUG (9/16-18-THD)  
17. 5P-0840 [1] SEAL-O-RING  
18. 030-3978 [1] CONNECTOR  
19. 3D-2824 [1] SEAL-O-RING  
20. 100-5725 [1] STUD (3/8-16X1.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750056
 

135-6531: CYLINDER HEAD GP

135-6531 CYLINDER HEAD GP
S/N 9NN426-426; 9NN429-UP
i00709054 SEBP3975
1356531 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31-CM)  
2. 103-6091 [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (34-CM)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 153-9653 [1] GASKET-CYLINDER HEAD  
5. 142-7341 Y [1] CYLINDER HEAD GP  
6. 107-5670 [6] SLEEVE AS  
7. 3E-6772 [24] SEAL (WATER)  
8. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
8A. 5H-1504 [16] WASHER-HARD (20X33.5X5-MM THK)  
8B. 124-1855 [16] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 6V-5049 [5] SEAL-O-RING  
11. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
11A. 124-1854 [10] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
11B. 5H-1504 [10] WASHER-HARD (20X33.5X5-MM THK)  
12. 2B-0858 [1] PLUG-PIPE  
13. 8L-2786 [1] SEAL-O-RING  
14. 2P-8421 [1] ADAPTER-O-RING  
15. 008-6817 [1] ELBOW  
16. 9S-8004 [3] PLUG (9/16-18-THD)  
17. 5P-0840 [1] SEAL-O-RING  
18. 030-3978 [1] CONNECTOR  
19. 3D-2824 [1] SEAL-O-RING  
20. 100-5725 [1] STUD (3/8-16X1.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
25. 2M-9780 [1] SEAL-O-RING  
26. 6V-5048 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750057
 

135-6531: CYLINDER HEAD GP

135-6531 CYLINDER HEAD GP
S/N 9NN429-UP
i00874105 SEBP3975
1356531 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31-CM)  
2. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 153-9653 [1] GASKET-CYLINDER HEAD  
5. 160-4347 CY [1] CYLINDER HEAD GP  
6. 107-5670 [6] SLEEVE AS  
7. 3E-6772 [24] SEAL (WATER)  
8. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
8A. 124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
8B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
9. 6V-5048 [1] SEAL-O-RING  
10. 6V-5049 [5] SEAL-O-RING  
11. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
11A. 124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
11B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
12. 2B-0858 [1] PLUG-PIPE  
13. 8L-2786 [1] SEAL-O-RING  
14. 2P-8421 [1] ADAPTER-O-RING  
15. 008-6817 [1] ELBOW  
16. 9S-8004 [3] PLUG (9/16-18-THD)  
17. 5P-0840 [1] SEAL-O-RING  
18. 030-3978 [1] CONNECTOR  
19. 6V-5050 [1] SEAL-O-RING  
20. 100-5725 [1] STUD (3/8-16X1.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
25. 6V-3251 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750058
 

135-6531: CYLINDER HEAD GP

135-6531 CYLINDER HEAD GP
S/N 9NN437-438; 9NN441-UP
i01390769 SEBP3975
1356531 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31-CM)  
2. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 224-5122 [1] GASKET (CYLINDER HEAD)  
5. 183-5296 CY [1] CYLINDER HEAD GP  
6. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
7. 3E-6772 [24] SEAL (WATER)  
8. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
8A. 124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
8B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
9. 6V-5048 [1] SEAL-O-RING  
10. 6V-5049 [5] SEAL-O-RING  
11. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
11A. 124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
11B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
12. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
13. 8L-2786 [1] SEAL-O-RING  
14. 2P-8421 [1] ADAPTER-O-RING  
15. 008-6817 [1] ELBOW  
16. 9S-8004 [3] PLUG (9/16-18-THD)  
17. 5P-0840 [1] SEAL-O-RING  
18. 030-3978 [1] CONNECTOR  
19. 6V-5050 [1] SEAL-O-RING  
20. 100-5725 [1] STUD (3/8-16X1.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
25. 6V-3251 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39750059
 

142-7341: CYLINDER HEAD GP

142-7341 CYLINDER HEAD GP
S/N 9NN416-UP
PART OF 135-6531, 153-9563 CYLINDER HEAD GP
i00503779 SEBP3975
1427341 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-7339 Y [1] CYLINDER HEAD AS  
2. 152-8380 [12] VALVE-INLET  
3. 152-7585 [12] VALVE-EXHAUST  
4. 6I-0928 [24] WASHER-SPECIAL  
5. 102-7665 [24] SPRING-VALVE  
6. 4P-4962 [24] ROTOCOIL AS  
7. 4P-4661 [48] LOCK-VALVE  
8. 102-6229 [24] SEAL-VALVE STEM  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Head Gasket is Now Available as Service Replacement {1124}
2004/08/01
A New Outer Valve Spring is Now Used {1100, 1108}
2008/11/17
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head
3406E and 3456 Generator Set Engines
Cylinder Head Valves
3406E and 3456 Generator Set Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Generator Set Engines
Troubleshooting
Valve Rotator or Spring Lock Is Free
3406E and 3456 Generator Set Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
3406E and 3456 Generator Set Engines
Electronic Unit Injector Sleeve - Remove
3406E and 3456 Generator Set Engines
Camshaft Bearings - Remove
3406E and 3456 Generator Set Engines
Camshaft Bearings - Install
3406E and 3456 Generator Set Engines
Cylinder Head - Remove
3406E and 3456 Generator Set Engines
Cylinder Head - Install
3406E and 3456 Generator Set Engines
Inlet and Exhaust Valve Guides - Remove and Install
3406E and 3456 Generator Set Engines
Inlet and Exhaust Valves - Remove and Install
3406E and 3456 Generator Set Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E and 3456 Generator Set Engines
Inlet and Exhaust Valve Seals - Remove and Install
3406E and 3456 Generator Set Engines
Inlet and Exhaust Valve Springs - Remove and Install
3406E and 3456 Generator Set Engines
Rocker Arm and Shaft - Remove
3406E and 3456 Generator Set Engines
Rocker Arm and Shaft - Install
3406E and 3456 Generator Set Engines

Caterpillar Parts SIS Catalog 3406E :

CYLINDER HEAD AS
142-7339 CYLINDER HEAD AS
CYLINDER HEAD AS
122-8042 CYLINDER HEAD AS
CYLINDER BLOCK GP
202-1261 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1254 CYLINDER BLOCK GP
CYLINDER BLOCK GP
146-2741 CYLINDER BLOCK GP
CYLINDER BLOCK GP
146-2741 CYLINDER BLOCK GP
CYLINDER BLOCK GP
137-8469 CYLINDER BLOCK GP
CYLINDER BLOCK GP
137-8469 CYLINDER BLOCK GP
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
CYLINDER HEAD GP
122-7026 CYLINDER HEAD GP
CYLINDER HEAD GP
129-0426 CYLINDER HEAD GP
CYLINDER HEAD GP
135-6531 CYLINDER HEAD GP
CYLINDER HEAD GP
135-6531 CYLINDER HEAD GP
CYLINDER HEAD GP
135-6531 CYLINDER HEAD GP

Truck sale:

2000 CAT 3406E
USD $8,785 
2000 CAT 3406E

Transgear Truck Supplies
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.