190-0009 MECHANISM GP-FUEL PUMP & VALVE S/N 9NN446-UP Type 1 3406E GEN SET ENGINE

Pos.	Part No	Qty	Parts name
1.	120-6955	[1]	BRACKET
2.	1S-9130	[1]	STUD (3/8-16X3.03-IN)
3.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
4.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
5.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
7.	1W-1456	[1]	PULLEY-ALTERNATOR (1-GROOVE)
8.	1A-1460	[1]	BOLT (1/2-13X2-IN)
9.	6B-6684	[2]	NUT-FULL (1/2-20-THD)
10.	9L-5134	[1]	ROD
11.	8S-5383	[1]	BLOCK
12.	0S-1585	[1]	BOLT (1/2-13X1.5-IN)
13.	7W-5520	[1]	BLOCK
14.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
15.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	4N-8216	[1]	V-BELT (ALTERNATOR)
17.	6V-2605	[1]	STUD-TAPERLOCK (3/8-16X3.59-IN)
18.	7W-4176	[1]	CAP-SEALING

#SEBP39750097

142-8347: PAN GP-OIL

PAN GP-OIL

142-8347 PAN GP-OIL
FOR USE WITH QUICK CHANGE OIL LINE
AN ATTACHMENT

i01481191 SEBP3975

For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	150-4638	[1]	PAN-OIL
2.	4N-1151	[1]	GASKET
3.	2P-3205	[32]	BOLT-WASHER HEAD (3/8-16X1.75-IN)
4.	8T-6761	[1]	PLUG-PIPE (1-11-1/2 NPT THD)
5.	9X-6451	[3]	PLUG-DRAIN (MAGNETIC)(OIL PAN)
6.	121-0145	[3]	SEAL-O-RING
7.	118-2019	[1]	UNDERFRAME AS
8.	0L-1351	[5]	BOLT (3/8-16X0.875-IN)
9.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	0S-1594	[3]	BOLT (3/8-16X1-IN)
11.	0S-1591	[4]	BOLT (3/8-16X1.5-IN)
12.	115-2365	[1]	BRACKET-TUBE
13.	109-6547	[1]	TUBE AS
14.	2K-4973	[2]	LOCKNUT (3/8-16-THD)
15.	109-0072	[1]	SEAL-O-RING
16.	109-0078	[1]	SEAL-O-RING
17.	4P-7373	[1]	TUBE AS
18.	9X-6458	[9]	WASHER-HARD (10.2X22.5X3-MM THK)
19.	115-2355	[1]	BRACKET AS
20.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)

#SEBP39750098

133-7538: PISTON & ROD GP

PISTON & ROD GP

133-7538 PISTON & ROD GP
S/N 9NN1-415
16.25:1 COMPRESSION RATIO. JET AS-PISTON EFFECTIVE 6BR1159-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
FOR USE WITH 425 OR HIGHER HP ENGINE

i00503863 SEBP3975

For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	149-5566	[1]	CROWN AS-PISTON
2.	130-0241	[1]	SKIRT-PISTON
3.	7E-1749	[1]	PIN-PISTON
4.	7E-1177	[2]	RETAINER-PIN
5.	9Y-6054	[1]	ROD AS-CONNECTING
	7N-2043	[2]	DOWEL
	7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
	4P-7377	[1]	BUSHING
6.	9Y-7735	[1]	BEARING-CONNECTING ROD (STANDARD)
	7E-0558 AB		BEARING-CONNECTING ROD (0.635-MM US)
	7E-0559 AB		BEARING-CONNECTING ROD (1.27-MM US)
7.	7N-7078	[1]	RING-PISTON (OIL CONTROL)
8.	144-5902	[1]	RING-PISTON (INTERMEDIATE)
9.	134-3761	[1]	RING-PISTON (TOP)
10.	168-4539	[1]	JET AS-PISTON COOLING
11.	151-5925	[1]	BOLT (7/16-14-THD)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP39750099

136-1562: PISTON & ROD GP

PISTON & ROD GP

136-1562 PISTON & ROD GP
S/N 9NN416-436; 9NN439-440
16.25:1 RATIO. JET AS-PISTON EFFECTIVE 6BR1159-UP, 9AP280-UP, 9NN418-UP. FOR ALL OTHER SERIAL NUMBERS,, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.

i00501298 SEBP3975

For full view, you need register

Parts for your 3406E GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-1560	[1]	CROWN AS-PISTON
2.	130-0241	[1]	SKIRT-PISTON
3.	168-7246	[1]	PIN-PISTON
4.	7E-1177	[2]	RETAINER-PIN
5.	9Y-6054	[1]	ROD AS-CONNECTING
5A.	4P-7377	[1]	BUSHING
5B.	7N-2043	[2]	DOWEL
5C.	7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
6.	217-0578 J	[1]	BEARING-CONNECTING ROD (STANDARD)
			-OR-
	9Y-7735	[1]	BEARING-CONNECTING ROD (STANDARD)
	7E-0558 AB		BEARING-CONNECTING ROD (0.635-MM US)
	7E-0559 AB		BEARING-CONNECTING ROD (1.27-MM US)
7.	134-3761	[1]	RING-PISTON (TOP)
8.	2P-2817	[1]	RING-PISTON (INTERMEDIATE)
9.	7N-7078	[1]	RING-PISTON (OIL CONTROL)
10.	168-4539	[1]	JET AS-PISTON COOLING
11.	151-5925	[1]	BOLT (7/16-14-THD)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		RECOMMENDED USE AFTER IN-FRAME OVERHAUL
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

BASIC ENGINE

VALVE MECHANISM GP

Engine News

A New Configuration of Valve Springs Is Now In Production {1108}
2001/01/01

A New Valve Cover and New Valve Cover Fasteners are Available {1107}
2004/04/01

Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/08/23

A New Rocker Arm Assembly is Available {1123}
2008/08/25

A New Rocker Arm Assembly Is Available {1123}
2011/09/12

A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/12

An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
2014/07/25

Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}

Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat^® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}

The Proper Torque for the Intake Valve Actuation Piston Jam Nut on Certain C15 and C18 Engines {1130}
The Proper Torque for the Intake Valve Actuation Piston Jam Nut on Certain C15 and C18 Engines {1130}

Special Instruction

Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}

Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}

Service Letter-NACD

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Valve Mechanism Cover
3406E and 3456 Generator Set Engines

Valve Mechanism
3406E and 3456 Generator Set Engines

Service Letter-China

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Testing and Adjusting

Finding Top Center Position for No. 1 Piston
3406E and 3456 Generator Set Engines

Engine Valve Lash - Inspect/Adjust
3406E and 3456 Generator Set Engines

Troubleshooting

Excessive Valve Lash
3406E and 3456 Generator Set Engines

Disassembly and Assembly

Valve Mechanism Cover - Remove and Install
3406E and 3456 Generator Set Engines

Valve Mechanism Cover Base - Remove and Install
3406E and 3456 Generator Set Engines

Rocker Arm - Disassemble
3406E and 3456 Generator Set Engines

Rocker Arm - Assemble
3406E and 3456 Generator Set Engines

Rocker Arm and Shaft - Remove
3406E and 3456 Generator Set Engines

Rocker Arm and Shaft - Install
3406E and 3456 Generator Set Engines

Service Magazine

Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat^® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}

Caterpillar Parts SIS Catalog 3406E :

148-7482 MECHANISM GP-FUEL PUMP & VALVE

127-0564 LIFTING GP-ENGINE

111-2088 LIFTING GP-ENGINE

137-5922 HOUSING GP-FRONT

127-1995 HOUSING GP-FRONT

130-4680 HOUSING GP-FLYWHEEL

190-0009 MECHANISM GP-FUEL PUMP & VALVE

6I-1940 MECHANISM GP-FUEL PUMP & VALVE

135-4941 MOUNTING GP-ALTERNATOR

142-8347 PAN GP-OIL

133-7538 PISTON & ROD GP

Truck sale:

USD $8,785

2000 CAT 3406E

Transgear Truck Supplies