ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING MOTOR GP
SWITCH GP
WIRING GP
ELECTRONICS GP-POWER TRAIN
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP39940150
189-5746: SENSOR GP-SPEED
189-5746 SENSOR GP-SPEED
S/N FDP18400-UP
PART OF 192-0849 TRANSMISSION GP-POWER SHIFT
FIELD REPLACEMENT ORDER @@@@@318-1181@@@@@
AN ATTACHMENT
S/N FDP18400-UP
PART OF 192-0849 TRANSMISSION GP-POWER SHIFT
FIELD REPLACEMENT ORDER @@@@@318-1181@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS#SEBP39940151
318-1181: SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
S/N FDP18400-UP
MAGNETIC, LOW OUTPUT
PART OF 445-8931 CONTROL GP-TRANSMISSION HYD, 192-0849 TRANSMISSION GP-POWER SHIFT
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@
AN ATTACHMENT
S/N FDP18400-UP
MAGNETIC, LOW OUTPUT
PART OF 445-8931 CONTROL GP-TRANSMISSION HYD, 192-0849 TRANSMISSION GP-POWER SHIFT
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS#SEBP39940152
143-0539: STARTING MOTOR GP-ELECTRIC
143-0539 STARTING MOTOR GP-ELECTRIC
S/N G4D1-784; CRS1-UP
12-VOLT
PART OF 237-0024 STARTING MOTOR GP-ELECTRIC
S/N G4D1-784; CRS1-UP
12-VOLT
PART OF 237-0024 STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-9778 | [1] | PLUNGER AS | |
| 2. | 8C-9783 | [1] | GASKET | |
| 3. | 2P-8104 | [1] | BEARING | |
| 4. | 7T-6092 | [1] | HOLDER AS-BRUSH | |
| 5. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 6. | 7T-6088 | [1] | BEARING AS | |
| 7. | 7T-6087 | [1] | WASHER (15.2X40X0.5-MM THK) | |
| 8. | 7T-6093 | [1] | CLUTCH AS | |
| 9. | 8J-4455 | [1] | BALL | |
| 10. | 7T-6090 | [1] | SPRING | |
| 11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 3E-5153 | [1] | COVER-STARTING MOTOR | |
| 13. | 3E-5154 | [1] | BUSHING-STARTING MOTOR | |
| 14. | 8F-1434 | [1] | LOCKWASHER | |
| 15. | 100-4113 | [1] | SWITCH AS (STARTING MOTOR)(12-VOLT) | |
| 16. | 100-4119 | [1] | ARMATURE AS | |
| 17. | 100-4118 | [1] | CASE AS-STARTING MOTOR | |
| 18. | 100-4115 | [1] | HOUSING-STARTING MOTOR | |
| 19. | 143-1344 | [1] | FRAME-STARTER | |
| 20. | 100-3685 | [1] | CAP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-6099 | [1] | KIT-GEAR (STARTING MOTOR) | ||
| (INCLUDES RETAINER, PINION & ROLLERS) | ||||
| 146-6729 | [1] | KIT-HARDWARE (STARTING MOTOR) | ||
| (INCLUDES BOLTS, SCREWS, SCREW ASSEMBLIES & PLATE) | ||||
| 100-4112 | [1] | KIT-CONTACT (STARTING MOTOR) | ||
| (INCLUDES NUT, WASHERS, SEAL, BUSHINGS, PLATE & BOLT) | ||||
| M | METRIC PART | |||
#SEBP39940153
237-0024: STARTING MOTOR GP-ELECTRIC
237-0024 STARTING MOTOR GP-ELECTRIC -12-VOLT
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS#SEBP39940154
237-4896: SWITCH GP-PRESSURE
237-4896 SWITCH GP-PRESSURE -ENGINE OIL
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS#SEBP39940155
235-8749: SWITCH GP-TEMPERATURE
235-8749 SWITCH GP-TEMPERATURE
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
S/N G4D1-UP; CRS1-UP
PART OF 234-3060, 273-3611 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS#SEBP39940156
202-5797: WIRING GP-AIR CONDITIONER
202-5797 WIRING GP-AIR CONDITIONER
S/N FDP18400-UP
PART OF 202-5777, 244-5402 AIR CONDITIONER AR
AN ATTACHMENT
S/N FDP18400-UP
PART OF 202-5777, 244-5402 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
| 2. | 3S-2093 | [4] | STRAP-CABLE | |
| 3. | 8Y-7833 | [1] | WIRE AS (18-GA) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 9U-2277 | [1] | CLIP AS | |
| 5. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 6. | 113-8490 | [1] | FUSE (10-AMPERE) | |
| 7. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(AIR CONDITIONER COMPRESSOR) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 131-3201 | [2] | BOOT | |
| 9. | 169-0605 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 10. | 169-0606 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 11. | 170-2237 | [1] | RELAY AS (12-VOLT) | |
| 12. | 174-6417 | [1] | HARNESS AS-HEATER & AIR COND (AIR COMPRESSOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 13. | 229-8377 | [1] | CIRCUIT BREAKER AS (35-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 14. | 220-4141 | [1] | HARNESS AS-HEATER & AIR COND (BLOWER FAN SPEED) | |
| 142-9117 | [2] | CONNECTOR (10-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 192-2111 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 192-2112 | [3] | SOCKET-TERMINAL | ||
| 8L-8413 | [25] | STRAP-CABLE (WHITE) | ||
| 128-2016 | [8] | TERMINAL | ||
| 2L-8065 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 112-9611 | [7] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 3E-9179 | [4] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 111-6792 | [1] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 15. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 16. | 213-7315 M | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 17. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 18. | 4P-8134 | [1] | CLIP (LADDER) | |
| 19. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 21. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP39940157
202-6107: WIRING GP-AIR CONDITIONER
202-6107 WIRING GP-AIR CONDITIONER
S/N FDP18400-UP
SHUT-OFF
PART OF 202-5775 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
S/N FDP18400-UP
SHUT-OFF
PART OF 202-5775 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT)(HEATER, A/C POWER) | |
| 2. | 3S-2093 B | [6] | STRAP-CABLE | |
| 3. | 202-6108 | [1] | HARNESS AS-HEATER & AIR COND (POWER) | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [11] | STRAP-CABLE (WHITE) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 4. | 131-1424 | [1] | SEAL | |
| 5. | 188-2470 | [1] | TACHOMETER AS (12-VOLT) | |
| 4B-2043 | [6] | NUT (8-32-THD) | ||
| 9B-7233 | [6] | LOCKWASHER | ||
| 122-7137 | [1] | LAMP (12-VOLT) | ||
| B | USE AS REQUIRED | |||
#SEBP39940158
238-1811: WIRING GP-AIR CONDITIONER
238-1811 WIRING GP-AIR CONDITIONER
S/N FDP18400-UP
PART OF 239-5566, 239-5568, 248-1474 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N FDP18400-UP
PART OF 239-5566, 239-5568, 248-1474 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [2] | RELAY AS (12-VOLT)(HIGH SPEED) | |
| 2. | 8Y-7833 | [1] | WIRE AS (18-GA) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 4. | 113-8490 | [1] | FUSE (10-AMPERE) | |
| 5. | 131-3201 | [2] | BOOT | |
| 6. | 169-0605 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 7. | 169-0606 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER) | |
| (EACH INCLUDES SWITCH AS) | ||||
| 111-7899 | [1] | GASKET | ||
| 8. | 170-2237 | [1] | RELAY AS (12-VOLT) | |
| 9. | 202-6108 | [1] | HARNESS AS-HEATER & AIR COND (POWER) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 8L-8413 | [11] | STRAP-CABLE (WHITE) | ||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6816 | [1] | LOCK | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 229-8377 | [1] | CIRCUIT BREAKER AS (35-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 11. | 229-8413 | [1] | HARNESS AS-HEATER & AIR COND (BLOWER, TEMPERATURE CONTROL) | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 192-2111 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECPATACLE AS & WEDGE) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 192-2112 | [2] | SOCKET-TERMINAL | ||
| 8L-8413 | [25] | STRAP-CABLE (WHITE) | ||
| 128-2016 | [2] | TERMINAL | ||
| 122-4401 | [6] | TERMINAL | ||
| 2L-8066 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 104-1995 | [6] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 091-2436 | [7] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 3E-9179 | [1] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 111-6792 | [1] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM) | |||
| 12. | 236-6923 | [1] | SWITCH AS-PRESSURE (HIGH, LOW)(HIGH - LOW) | |
| 13. | 238-7492 | [1] | HARNESS AS-HEATER & AIR COND (COMPRESSOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 14. | 9X-7378 | [1] | SEAL-O-RING | |
| 15. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 16. | 213-7315 M | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 17. | 3S-2093 | [5] | STRAP-CABLE | |
| 18. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 19. | 4P-8134 | [2] | CLIP (LADDER) | |
| 20. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP39940159
185-8809: WIRING GP-AUTOSHIFT
185-8809 WIRING GP-AUTOSHIFT
S/N FDP18400-UP
PART OF 192-4659, 192-4660, 192-4664 POWER TRAIN AR
AN ATTACHMENT
S/N FDP18400-UP
PART OF 192-4659, 192-4660, 192-4664 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 420D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8679 | [1] | DIODE AS-LIGHT | |
| 2. | 3S-2093 | [17] | STRAP-CABLE | |
| 3. | 6K-0806 | [5] | STRAP-CABLE | |
| 4. | 7K-1181 | [2] | STRAP-CABLE | |
| 5. | 8Y-7833 | [1] | WIRE AS (18-GA) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.1-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 7. | 155-8522 | [3] | MOUNT | |
| 8. | 169-0604 | [1] | SWITCH AS-ROCKER (AUTOSHIFT)(FIFTH GEAR LOCKOUT) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 174-6411 | [1] | HARNESS AS-CONSOLE (AUTOSHIFT SWITCH) | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 112-9611 | [6] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 10. | 174-6415 | [1] | HARNESS AS-PLATFORM (AUTOSHIFT) | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [39] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 180-9340 | [17] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [27] | STRAP-CABLE (WHITE) | ||
| 141-8061 B | TAPE | |||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 174-6649 | [1] | CONTROL GP-TRANSMISSION | |
| 12. | 187-1043 | [1] | CONTROL GP-AUTOSHIFT | |
| 13. | 209-1925 | [1] | HARNESS AS-CONTROL (AUTOSHIFT CONTROL)(BATTERY BOX) | |
| 7T-8894 | [1] | GROMMET | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 180-9340 | [52] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 165-7097 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 006-2884 | [1] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 6V-2689 E | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 14. | 209-1947 | [1] | HARNESS AS-TRANSMISSION (AUTOSHIFT) | |
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 15. | 095-0756 M | [4] | SCREW-MACHINE (M5X0.8X16-MM) | |
| 16. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 17. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
| 18. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 19. | 4P-7429 | [1] | CLIP (LADDER) | |
| 20. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 21. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 22. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Specifications
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Disassembly and Assembly
Service Magazine
