AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

214-6944 FRAME GP-LOADER -SINGLE TILT S/N BNK5900-UP PART OF 214-6953 CHASSIS AR 430D BACKHOE LOADER


FRAME AND BODY
FRAME GP
GUARD GP
ENCLOSURE GP
HOOD GP
HYDRAULIC SYSTEM
ACCUMULATOR GP

BACKHOE LOADER 430D BACKHOE LOADER BNK
 430D Backhoe Loader BNK05900-UP (MACHINE) POWERED BY 3054C Engine SEBP3996 430D BNK   (1999)

FRAME AND BODY

FRAME GP
FRAME GP-LOADER
214-6944 FRAME GP-LOADER
FRAME GP-SWING
183-6057 FRAME GP-SWING
FRAME GP-SWING
183-6057 FRAME GP-SWING
 

#SEBP39960340
 

214-6944: FRAME GP-LOADER

214-6944 FRAME GP-LOADER -SINGLE TILT
S/N BNK5900-UP
PART OF 214-6953 CHASSIS AR
i01967013 SEBP3996
2146944 FRAME GP-LOADER Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-0481 [2] WASHER (71X110X4-MM THK)  
2. 9R-7701 [1] CAP AS  
  9R-4110 [2] BUSHING  
3. 114-6099 M [6] BOLT (M24X3X80-MM)  
4. 214-6946 [1] FRAME AS  
4A. 9R-0431 [2] BUSHING  
4B. 102-4560 [1] BUSHING  
4C. 262-7044 [1] BEARING  
4D. 9R-4110 [2] BUSHING  
4E. 9R-0366 [1] WASHER (80X140X5-MM THK)  
  238-9618 [1] TOWER AS-LOADER  
4F. 9R-6690 [4] BUSHING  
5. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
7. 8T-4001 M [6] NUT (M24X3-THD)  
8. 8T-4167 [12] WASHER-HARD (26X44X4-MM THK)  
  M   METRIC PART
 

#SEBP39960341
 

183-6057: FRAME GP-SWING

183-6057 FRAME GP-SWING
S/N BNK5900-7053
PART OF 214-6953 CHASSIS AR
i02016360 SEBP3996
1836057 FRAME GP-SWING Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7958 [1] SLEEVE-CABLE SPLICE  
2. 8T-4837 [1] WASHER (48X85X6-MM THK)  
3. 130-0484 [1] PIN  
4. 9R-5429 B [2] SPACER (67.5X120X3-MM THK)  
5. 9R-7882 [2] SPACER (14X25X7-MM THK)  
6. 9R-8291 B [2] SPACER (66X125X1-MM THK)  
7. 236-6955 C [1] FRAME AS  
7A. 9R-0366 [1] WASHER (80X140X5-MM THK)  
7B. 236-8158 [2] BUSHING  
7C. 236-8159 [2] BUSHING  
7D. 236-8183 [4] BUSHING  
8. 9R-8594 [1] PIN AS  
9. 9R-8760 [2] PLATE  
10. 9R-8868 [1] PLATE  
11. 101-4015 [1] BRACKET  
12. 159-0960 [1] PIN AS  
13. 102-1940 [1] STOP  
14. 104-5507 B [4] WASHER (61X90X2-MM THK)  
15. 130-2533 [2] PIN  
16. 131-8775 [1] BRACKET AS  
17. 134-0143 [1] CABLE  
18. 142-6132 [1] ROD AS  
  6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
  123-7034 [1] ROD  
19. 147-9943 [1] WEDGE  
20. 147-9945 [1] WEDGE  
21. 164-1188 [1] PLATE AS  
22. 164-1190 [1] PIN AS  
23. 237-0803 C [1] SPRING  
24. 238-0290 BC [1] SHIM (0.5-MM THK)  
25. 238-0291 BC [1] SHIM (1-MM THK)  
26. 222-0844 [1] CABLE AS  
  8U-6970 [1] RING-RETAINING  
27. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
28. 4D-7794 [1] CLIP  
29. 6V-7687 M [3] LOCKNUT (M12X1.75-THD)  
30. 7X-7729 [2] WASHER (11X25X3-MM THK)  
31. 8T-3652 M [1] NUT (M42X2-THD)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
34. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-4821 [2] WASHER (13.5X40X3-MM THK)  
38. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
39. 8T-5092 M [2] BOLT (M12X1.75X150-MM)  
40. 8T-8894 M [1] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
41. 236-8182 C [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39960342
 

183-6057: FRAME GP-SWING

183-6057 FRAME GP-SWING
S/N BNK7054-UP
PART OF 214-6953 CHASSIS AR
i02395673 SEBP3996
1836057 FRAME GP-SWING Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7958 [1] SLEEVE-CABLE SPLICE  
2. 8T-4837 [1] WASHER (48X85X6-MM THK)  
3. 130-0484 [1] PIN  
4. 9R-5429 B [2] SPACER (67.5X120X3-MM THK)  
5. 9R-7882 [2] SPACER (14X25X7-MM THK)  
6. 9R-8291 B [2] SPACER (66X125X1-MM THK)  
7. 236-6955 [1] FRAME AS  
7A. 9R-0366 [1] WASHER (80X140X5-MM THK)  
7B. 236-8158 [2] BUSHING  
7C. 236-8159 [2] BUSHING  
7D. 236-8183 [4] BUSHING  
8. 9R-8594 [1] PIN AS  
9. 9R-8760 [2] PLATE  
10. 283-7525 [1] PLATE  
11. 101-4015 [1] BRACKET  
12. 159-0960 [1] PIN AS  
13. 102-1940 [1] STOP  
14. 104-5507 B [4] WASHER (61X90X2-MM THK)  
15. 130-2533 [2] PIN  
16. 131-8775 [1] BRACKET AS  
17. 134-0143 [1] CABLE  
18. 270-5290 CM [1] BOLT-SOCKET HEAD (M12X1.75X300-MM)  
19. 147-9943 [1] WEDGE  
20. 147-9945 [1] WEDGE  
21. 283-7527 [1] PLATE AS  
22. 164-1190 [1] PIN AS  
23. 237-0803 [1] SPRING  
24. 238-0290 B [1] SHIM (0.5-MM THK)  
25. 238-0291 B [1] SHIM (1-MM THK)  
26. 222-0844 [1] CABLE AS  
  8U-6970 [1] RING-RETAINING  
27. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
28. 4D-7794 [1] CLIP  
29. 6V-7687 M [3] LOCKNUT (M12X1.75-THD)  
30. 7X-7729 [2] WASHER (11X25X3-MM THK)  
31. 8T-3652 M [1] NUT (M42X2-THD)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
34. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-4821 [2] WASHER (13.5X40X3-MM THK)  
38. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
39. 8T-5092 M [2] BOLT (M12X1.75X150-MM)  
40. 8T-8894 M [1] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
41. 236-8182 [2] PIN  
42. 5P-1076 C [3] WASHER-HARD (13.5X30X4-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP39960343
 

133-3361: GUARD GP-CYLINDER

133-3361 GUARD GP-CYLINDER -STABILIZER
S/N BNK5900-UP
FOR USE WITH @@@@@ 9R-6007@@@@@, @@@@@ 9R-1085@@@@@, @@@@@116-4942@@@@@
AN ATTACHMENT
i00201058 SEBP3996
1333361 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4986 [4] CLAMP-HOSE  
2. 130-1638 [2] PIN  
3. 130-1640 [2] GUARD AS  
4. 188-3953 [2] PAD  
5. 9R-0109 B [12] WASHER (41X64X3-MM THK)  
6. 201-5812 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  201-5810 [1] PLATE  
7. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 6V-8144 [4] RING-RETAINING  
9. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39960344
 

135-4744: GUARD GP-CYLINDER

135-4744 GUARD GP-CYLINDER -STABILIZER
S/N BNK5900-UP
FOR USE WITH @@@@@ 9R-6007@@@@@
AN ATTACHMENT
i00201067 SEBP3996
1354744 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4986 [4] CLAMP-HOSE  
2. 130-1640 [2] GUARD AS  
3. 146-1589 [4] LATCH  
4. 146-1590 [4] LATCH  
5. 188-3953 [2] PAD  
6. 201-5810 [2] PLATE  
7. 201-5812 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  201-5810 [1] PLATE  
8. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 6V-5729 [4] LOCKNUT (7/16-14-THD)  
10. 7X-0310 [4] BOLT (7/16-14X2-IN)  
11. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
12. 8T-5360 [8] WASHER (12X22.5X2.5-MM THK)  
13. 9R-0109 B [12] WASHER (41X64X3-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39960345
 

9R-1233: GUARD GP-DRIVE SHAFT

9R-1233 GUARD GP-DRIVE SHAFT
S/N BNK5900-UP
PART OF 237-6459 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00200251 SEBP3996
9R1233 GUARD GP-DRIVE SHAFT Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-8481 [1] GUARD AS  
2. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
3. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP39960346
 

234-9065: HOOD & GUARD GP

234-9065 HOOD & GUARD GP
S/N BNK5900-UP
PART OF 214-6953 CHASSIS AR
i01986736 SEBP3996
2349065 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (83-CM)  
2. 9R-2620 [1] PLUG  
3. 112-4415 [2] BUMPER AS  
4. 112-4416 [1] GUARD AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
5. 123-0428 [2] BAR  
6. 123-4065 [6] RIVET-POP  
7. 135-9886 [1] SPRING  
8. 141-7514 [2] BAFFLE  
9. 145-4476 [1] ENCLOSURE GP (RH)  
  3E-6600 SEAL (117-CM)  
  138-0659 [1] PANEL (RH)  
10. 179-5571 E SEAL (61-CM)  
11. 188-0862 [1] GRILL AS  
12. 188-0865 [1] BAFFLE  
13. 198-8341 [1] CABLE AS  
14. 234-9066 [1] ENCLOSURE GP-ENGINE (LH)  
  234-9067 [1] PANEL AS  
  177-4122 SEAL (95-CM)  
15. 234-9522 Y [1] HOOD GP-ENGINE  
16. 3S-2093 [4] STRAP-CABLE  
17. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
18. 6P-6590 [1] GROMMET  
19. 7X-2554 M [2] BOLT (M16X2X70-MM)  
20. 7X-7729 [3] WASHER (11X25X3-MM THK)  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4133 M [1] NUT (M10X1.5-THD)  
23. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
24. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
25. 8T-4138 M [1] BOLT (M6X1X20-MM)  
26. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
27. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
28. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
29. 8T-4222 [5] WASHER-PLATED (11X32X2.5-MM THK)  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-7547 M [6] BOLT (M8X1.25X30-MM)  
32. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39960347
 

234-9522: HOOD GP-ENGINE

234-9522 HOOD GP-ENGINE
S/N BNK5900-UP
PART OF 234-9065 HOOD & GUARD GP
i01970129 SEBP3996
2349522 HOOD GP-ENGINE Parts scheme 2349522 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8211 E FILM-STRIPE (139-CM EACH)  
2. 126-8472 E SEAL (35.8-CM EACH)  
3. 4V-5091 [2] GROMMET  
4. 5D-4822 [4] RING-RETAINING  
5. 5V-8309 [1] STRIKER AS  
6. 8T-0318 B [3] SHIM (0.8-MM THK)  
7. 8T-2444 [4] STUD-BALL  
8. 8Y-6998 [1] LATCH AS-ROTARY  
9. 9R-4784 [1] PLATE AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
10. 114-8861 [2] SPRING AS-GAS  
11. 114-8972 [2] HINGE AS (LH)  
12. 114-8973 [2] HINGE AS (RH)  
13. 115-5219 [1] PLATE AS  
14. 115-5220 [1] PLATE  
15. 122-5923 [1] BAFFLE  
16. 123-4065 [11] RIVET-POP  
17. 131-0827 [1] PLATE (LH)  
18. 131-0828 [1] PLATE (RH)  
19. 141-7515 [1] BAFFLE  
20. 191-9109 [1] HOOD AS (LH)  
21. 191-9110 [1] HOOD AS (RH)  
22. 224-8945 [1] FILM-WARNING (DO NOT USE ETHER, U.S.)  
23. 234-9523 [1] SUPPORT AS  
24. 238-4441 [1] FILM (LUBRICANTS)  
25. 129-3178 M [4] LOCKNUT (M6X1-THD)  
26. 139-3785 [9] RIVET-POP  
27. 4B-4274 [18] WASHER (5.5X13X1.2-MM THK)  
28. 5C-7261 M [6] NUT (M8X1.25-THD)  
29. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
30. 8T-4181 M [2] BOLT (M6X1X20-MM)  
31. 8T-4189 M [12] BOLT (M8X1.25X20-MM)  
32. 8T-4197 M [3] BOLT (M8X1.25X40-MM)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 8T-4224 [19] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-5091 M [2] BOLT (M8X1.25X20-MM)  
36. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
37. 191-9111 [1] FILM-IDENTIFICATION (CAT)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39960348
 

149-0686: ACCUMULATOR GP-HYDRAULIC

149-0686 ACCUMULATOR GP-HYDRAULIC -CHARGED
S/N BNK5900-UP
PART OF 195-0255 ACCUMULATOR GP-STABILIZER
AN ATTACHMENT
i02036049 SEBP3996
1490686 ACCUMULATOR GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 232-3317 [1] FILM-IDENTIFICATION (HYDRAULIC ACCUMULATOR)  
 

#SEBP39960349
 

227-8807: ACCUMULATOR GP-HYDRAULIC

227-8807 ACCUMULATOR GP-HYDRAULIC -UNCHARGED
S/N BNK5900-UP
i02036588 SEBP3996
2278807 ACCUMULATOR GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 232-3317 [1] FILM-IDENTIFICATION (HYDRAULIC ACCUMULATOR)  
 

Information:

Operation and Maintenance Manual
Swing Lock Pin Control
420D and 430D Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
420D and 430D Backhoe Loaders
Transport Position
420D and 430D Backhoe Loaders
Transport Position
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Special Instruction
Rebuilding the Backhoe Loader Pin Bores {6101, 6104, 6119, 6501, 6502, 6503, 6506, 6508, 6515, 6518, 6533, 7054, 7222}
Rebuilding the Backhoe Loader Pin Bores {6101, 6104, 6119, 6501, 6502, 6503, 6506, 6508, 6515, 6518, 6533, 7054, 7222}
Field Installation of the Expander Pins{5456, 5458, 5486, 6501, 6502, 6506, 6533}
Field Installation of the Expander Pins{5456, 5458, 5486, 6501, 6502, 6506, 6533}
Field Installation of the Swing Frame{6506}
Field Installation of the Swing Frame{6506}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE FRONT AXLE STOP WHICH MAY BE MISALIGNED ON CERTAIN 420D IT, 430D AND 430D IT BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE FRONT AXLE STOP WHICH MAY BE MISALIGNED ON CERTAIN 420D IT, 430D AND 430D IT BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE FRONT AXLE STOP WHICH MAY BE MISALIGNED ON CERTAIN 420D IT, 430D AND 430D IT BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE FRONT AXLE STOP WHICH MAY BE MISALIGNED ON CERTAIN 420D IT, 430D AND 430D IT BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING CRACKS IN THE FRAME RAIL AT THE FRONT AXLE MOUNTS ON CERTAIN 416C, 416D, 420D, 426C, 430D BACKHOE LOADERS AND 420D AND 430D INTEGRATED TOOLCARRIERS
Technical Information Bulletin
SWING CYLINDER BEARINGS WALKING IN THE SWING FRAME ON BACKHOE LOADERS
SWING CYLINDER BEARINGS WALKING IN THE SWING FRAME ON BACKHOE LOADERS
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 236-8182 PIN IN ORDER TO PREVENT THE SWING CYLINDER ROD BEARINGS FROM MOVING ON CERTAIN 416D, 420D, 420D IT, 430D, 430D IT, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
Disassembly and Assembly
Swing Frame - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems
Swing Frame - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}
2001/10/15
The Special Instruction , "Rebuilding the Backhoe Loader Pin Bores" is Now Updated {6101, 6104, 6119, 6501, 6502, 6503, 6506, 6508, 6515, 6518, 6533, 7054, 7222}
2002/05/27
The Swing Frame Has Been Improved {6506}
2004/05/03
The Swing Frame Has Been Improved {6506}
2004/07/05
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
A New Pin in the Bottom of the Swing frame Can Improve Reliability on Certain Backhoe Loaders {6506}
2007/08/20
Steps Added To The Installation Process For The Swing Frame {6506}
2008/01/21

Caterpillar Parts SIS Catalog 430D :

FLOORPLATE GP
224-9749 FLOORPLATE GP
FLOORPLATE GP
224-9748 FLOORPLATE GP
FENDER GP-REAR
164-1148 FENDER GP-REAR
FENDER GP-FRONT
201-3954 FENDER GP-FRONT
DOOR GP-BATTERY
118-6842 DOOR GP-BATTERY
COUNTERWEIGHT GP
240-0020 COUNTERWEIGHT GP
COUNTERWEIGHT GP
120-8482 COUNTERWEIGHT GP
COUNTERWEIGHT GP
106-5881 COUNTERWEIGHT GP
FRAME GP-SWING
183-6057 FRAME GP-SWING
FRAME GP-SWING
183-6057 FRAME GP-SWING
GUARD GP-CYLINDER
133-3361 GUARD GP-CYLINDER
GUARD GP-CYLINDER
135-4744 GUARD GP-CYLINDER
GUARD GP-DRIVE SHAFT
9R-1233 GUARD GP-DRIVE SHAFT
HOOD & GUARD GP
234-9065 HOOD & GUARD GP
HOOD GP-ENGINE
234-9522 HOOD GP-ENGINE
ACCUMULATOR GP-HYDRAULIC
149-0686 ACCUMULATOR GP-HYDRAULIC

Truck sale:

Caterpillar 430D
 
Caterpillar 430D
- backhoe loader
MILTON CAT
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
41.500 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BLANCHARD MACHINERY CO.
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
44.750 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
ZIEGLER CAT
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
50.700 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
FOLEY EQUIPMENT COMPANY
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
51.119 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.