AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

183-4998 CONSOLE GP-SIDE -RH S/N BNK5900-UP PART OF 185-3524 CONSOLE GP-OPERATOR AN ATTACHMENT 430D BACKHOE LOADER


OPERATOR STATION
CONSOLE GP
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK
CONTROL GP-STEERING

BACKHOE LOADER 430D BACKHOE LOADER BNK
 430D Backhoe Loader BNK05900-UP (MACHINE) POWERED BY 3054C Engine SEBP3996 430D BNK   (1999)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-SIDE
164-1132 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE
CONSOLE GP-SIDE
236-6937 CONSOLE GP-SIDE
COVER GP-CONSOLE
183-4991 COVER GP-CONSOLE
COVER GP-CONSOLE
191-1784 COVER GP-CONSOLE
 

#SEBP39960910
 

183-4998: CONSOLE GP-SIDE

183-4998 CONSOLE GP-SIDE -RH
S/N BNK5900-UP
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
i01533197 SEBP3996
1834998 CONSOLE GP-SIDE Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5503 [1] LOUVER AS  
2. 164-1178 C [5] CLIP  
3. 172-8591 CM [16] NUT-CLIP (M6X1-THD)  
4. 183-4991 Y [1] COVER GP-CONSOLE  
5. 202-6142 C [1] CONSOLE-SIDE  
6. 204-7341 [1] COVER-FUSE  
7. 104-2091 [4] SCREW-FLAT HEAD (6-20X0.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39960911
 

236-6937: CONSOLE GP-SIDE

236-6937 CONSOLE GP-SIDE -LH
S/N BNK5900-UP
PART OF 236-6938 CONSOLE GP-OPERATOR
AN ATTACHMENT
i01980961 SEBP3996
2366937 CONSOLE GP-SIDE Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9000 J [1] LOCK AS-CYLINDER  
2. 118-5503 [2] LOUVER AS  
3. 164-1133 [1] COVER  
4. 164-1134 [1] PIN  
5. 188-7760 [1] PLATE  
6. 200-2673 [1] PLATE  
7. 232-4873 [1] CONSOLE (LH)  
8. 104-2091 [8] SCREW-FLAT HEAD (6-20X0.5-IN)  
  J   REQUIRES CORPORATE KEY
 

#SEBP39960912
 

183-3120: CONTROL GP-HYDRAULIC HAND

183-3120 CONTROL GP-HYDRAULIC HAND
S/N BNK5900-UP
PART OF 214-6953 CHASSIS AR
i01353429 SEBP3996
1833120 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4766 [1] ROD END  
6. 8T-4773 [1] BALL JOINT  
7. 8T-4815 [2] ROD END  
8. 9R-1765 [1] COVER-TOP  
9. 9R-1766 [1] COVER-BOTTOM  
10. 9R-1767 [1] BOOT  
11. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 107-5591 [1] NUT-JAM (3/4-16-THD)  
13. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
14. 140-6021 [1] PLATE  
15. 164-1368 [8] FASTENER (CLIP)  
16. 164-1369 [1] PLATE  
17. 179-8235 [1] LOCK PIN  
18. 183-3121 [1] BRACKET AS  
19. 183-3122 [1] LEVER AS  
20. 183-3131 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
21. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
22. 183-3137 [1] PIN  
23. 183-3153 [1] ROD  
24. 183-3155 [1] ROD  
25. 183-3156 [1] ROD  
26. 201-8069 [1] SEAL  
27. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
28. 3S-2093 [1] STRAP-CABLE  
29. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
30. 8C-4987 [1] PIN-CLEVIS  
31. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [8] NUT (M10X1.5-THD)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9R-2807 [1] CLIP (RETAINER)  
38. 9R-3067 [1] PIN  
39. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39960913
 

183-3150: CONTROL GP-HYDRAULIC HAND

183-3150 CONTROL GP-HYDRAULIC HAND
S/N BNK5900-UP
PART OF 186-5338, 202-5806 HYDRAULIC AR
AN ATTACHMENT
i01398246 SEBP3996
1833150 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-4773 [1] BALL JOINT  
4. 8T-4815 [1] ROD END  
5. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
6. 164-1395 [1] KNOB  
7. 179-8235 [1] LOCK PIN  
8. 183-3151 [1] LEVER AS  
  183-3136 [1] BUSHING  
9. 183-3153 [1] ROD  
10. 183-3156 [1] ROD  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [3] NUT (M10X1.5-THD)  
14. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  M   METRIC PART
 

#SEBP39960914
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N BNK5900-UP
AN ATTACHMENT
i00200824 SEBP3996
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP39960915
 

184-4483: CONTROL GP-HYDRAULIC PEDAL

184-4483 CONTROL GP-HYDRAULIC PEDAL -EXTENDABLE STICK
S/N BNK5900-UP
PART OF 210-8526, 210-8531 HYDRAULIC AR, 186-4959, 186-4960 INSTALLATION AR-BANK VALVE, 215-1511 VALVE AR-BANK 5, 215-1512 VALVE AR-BANK 6
AN ATTACHMENT
i01394171 SEBP3996
1844483 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-4488 [1] SUPPORT AS  
2. 184-4491 [1] PEDAL AS (RH)  
3. 184-5417 [1] SHAFT AS  
4. 186-1581 [1] COVER  
5. 186-1582 [1] PLATE  
6. 186-1592 [1] TUBE  
7. 186-1597 [1] CONNECTOR  
8. 198-0097 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
9. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
10. 218-4513 [1] CONNECTOR AS  
11. 218-4516 [1] BALL JOINT  
12. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
13. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7X-2544 M [1] BOLT (M10X1.5X140-MM)  
15. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
17. 9R-2806 [3] PIN  
18. 9R-2807 [2] CLIP (RETAINER)  
19. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39960916
 

184-4484: CONTROL GP-HYDRAULIC PEDAL

184-4484 CONTROL GP-HYDRAULIC PEDAL
S/N BNK5900-UP
PART OF 186-4960 INSTALLATION AR-BANK VALVE, 215-1512 VALVE AR-BANK 6
AN ATTACHMENT
i01395390 SEBP3996
1844484 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-4486 [1] SHAFT AS  
2. 184-5403 [1] PEDAL AS (LH)  
3. 184-5408 [1] SUPPORT AS  
4. 186-1592 [1] TUBE  
5. 186-1597 [1] CONNECTOR  
6. 198-0098 [1] FILM-INSTRUCTION (AUXILIARY)  
7. 218-4513 [1] CONNECTOR AS  
8. 218-4516 [1] BALL JOINT  
9. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
10. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
11. 7X-2544 M [1] BOLT (M10X1.5X140-MM)  
12. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
14. 9R-2806 [2] PIN  
15. 9R-2807 [2] CLIP (RETAINER)  
  M   METRIC PART
 

#SEBP39960917
 

185-5915: CONTROL GP-JOYSTICK

185-5915 CONTROL GP-JOYSTICK -RH
S/N BNK5900-UP
PART OF 202-5916 CONTROL AR-BACKHOE
AN ATTACHMENT
i01397608 SEBP3996
1855915 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-8143 [1] HANDLE AS-CONTROL  
2. [1] BOOT  
3. 196-6870 [1] KIT-LEVER  
    (KIT INCLUDES BENT LEVER, PIN LOCKNUT, & HEX NUT)
4. 217-3850 [1] KIT-UNIVERSAL JOINT  
    (KIT INCLUDES UNIVERSAL JOINT & SHIMS)
5. 122-1904 [1] PLATE  
6. 196-6904 [4] KIT-PLUNGER  
    (EACH KIT INCLUDES SNAP RING, PLATER, WASHER, PLUNGER, & GUIDE)
7. 196-6873 [4] KIT-REGULATOR  
    (EACH KIT INCLUDES SHIMS, SPOOL, SPRING, & RETAINER)
8. 196-6874 [4] KIT-SPRING  
9. 198-1873 [1] VALVE  
10. 9T-2837 [1] KIT-SEAL (VALVE)  
    (KIT INCLUDES PINS, O-RINGS, & BOLT)
 

#SEBP39960918
 

185-5916: CONTROL GP-JOYSTICK

185-5916 CONTROL GP-JOYSTICK -LH
S/N BNK5900-UP
PART OF 202-5916 CONTROL AR-BACKHOE
AN ATTACHMENT
i01439518 SEBP3996
1855916 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-3510 [1] HANDLE AS-CONTROL (LH)  
2. [1] BOOT  
3. 208-9682 [1] KIT-LEVER  
    (KIT INCLUDES BENT LEVER, LOCKNUT PIN, & HEX NUT)
4. 217-3850 [1] KIT-UNIVERSAL JOINT  
    (KIT INCLUDES UNIVERSAL JOINT & SHIMS)
5. 122-1904 [1] PLATE  
6. 196-6904 [4] KIT-PLUNGER  
    (EACH KIT INCLUDES SNAP RING, PLATER, WASHER, PLUNGER, & GUIDE)
7. 196-6873 [4] KIT-REGULATOR  
    (EACH KIT INCLUDES SHIMS, SPOOL, & RETAINER)
8. 196-6874 [4] KIT-SPRING  
9. 198-1873 [1] VALVE  
10. 9T-2837 [1] KIT-SEAL (VALVE)  
    (KIT INCLUDES PINS, O-RINGS, & BOLT)
 

#SEBP39960919
 

183-4897: CONTROL GP-STEERING

183-4897 CONTROL GP-STEERING
S/N BNK5900-UP
PART OF 214-6953 CHASSIS AR
i01773550 SEBP3996
1834897 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 430D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-9580 Y [1] STEERING WHEEL GP  
2. 163-7940 [1] PANEL AS  
3. 185-3529 [1] CONSOLE AS  
4. 206-6974 CY [1] STEERING COLUMN GP (TILT)  
5. 5C-7261 M [2] NUT (M8X1.25-THD)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
11. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Gauges
420D and 430D Backhoe Loaders
Vandalism Guard (Rotating Gauge Panel) - If Equipped
420D and 430D Backhoe Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1641109 FUSE COVER ON CERTAIN 416D, 420D AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1641109 FUSE COVER ON CERTAIN 416D, 420D AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1641109 FUSE COVER ON CERTAIN 416D, 420D AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1641109 FUSE COVER ON CERTAIN 416D, 420D AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 416D, 420D, 420D IT, 424D, 428D, 430D, 430D IT, 432D, 438D, 442D AND 446D BACKHOE LOADERS
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
The D-series Backhoe Loader Has Been Updated {1058, 1273, 4203, 7056, 7451}
2002/04/08
A New Key Start Switch Is Available For Series D Backhoe Loaders {1408, 1416}
2008/02/04

Caterpillar Parts SIS Catalog 430D :

CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
164-1132 CONSOLE GP-SIDE
CONSOLE GP-SIDE
164-1131 CONSOLE GP-SIDE
CONSOLE GP-OPERATOR
236-6938 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3530 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3524 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
164-1389 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
164-1388 CONSOLE GP-OPERATOR
CONSOLE GP-SIDE
236-6937 CONSOLE GP-SIDE
CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
184-4483 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
184-4484 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-JOYSTICK
185-5915 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
185-5916 CONTROL GP-JOYSTICK

Truck sale:

Caterpillar 430D
 
Caterpillar 430D
- backhoe loader
MILTON CAT
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
41.500 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BLANCHARD MACHINERY CO.
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
44.750 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
ZIEGLER CAT
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
50.700 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
FOLEY EQUIPMENT COMPANY
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
51.119 
Caterpillar 430D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.