ELECTRICAL AND STARTING SYSTEM
SWITCH GPSOLENOID GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP40000510
398-0939: SWITCH GP-MAGNETIC
For full view, you need register
Parts for your C7 MARINE ENGINE:
#SEBP40000511
3E-0075: SWITCH GP-MAGNETIC
3E-0075 SWITCH GP-MAGNETIC -ENGINE START
24-VOLT
PART OF 173-2058, 247-4140, 307-9973 WIRING GP-ENGINE
FIELD REPLACEMENT FOR @@@@@175-2324@@@@@, @@@@@175-2322@@@@@
AN ATTACHMENT
24-VOLT
PART OF 173-2058, 247-4140, 307-9973 WIRING GP-ENGINE
FIELD REPLACEMENT FOR @@@@@175-2324@@@@@, @@@@@175-2322@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP40000512
3E-7278: SWITCH GP-MAGNETIC
3E-7278 SWITCH GP-MAGNETIC -ENGINE START
12-VOLT
PART OF 247-4141, 307-0546 WIRING GP-ENGINE
AN ATTACHMENT
12-VOLT
PART OF 247-4141, 307-0546 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
#SEBP40000513
122-5053: VALVE GP-SOLENOID
122-5053 VALVE GP-SOLENOID
PART OF 172-5210 PUMP GP-UNIT INJECTOR HYD
PART OF 172-5210 PUMP GP-UNIT INJECTOR HYD
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JZ | [1] | SEAL-O-RING | |
| 2. | JZ | [1] | RING-BACKUP | |
| 3. | JZ | [1] | SPACER-SPECIAL | |
| 4. | JZ | [1] | NUT-RETAINER (1/2-20-THD) | |
| 5. | JZ | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-1484 J | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP40000514
165-9023: WIRING GP-ENGINE
165-9023 WIRING GP-ENGINE -12-VOLT
S/N C7X1-UP
CANNOT BE USED WITH @@@@@173-2058@@@@@
AN ATTACHMENT
S/N C7X1-UP
CANNOT BE USED WITH @@@@@173-2058@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7278 | [1] | SWITCH GP-MAGNETIC (STARTER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES WEDGE & RECEPTACLE AS) | ||||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 9X-1386 B | SLEEVE | |||
| 2. | 4P-5918 | [4] | CLIP | |
| 3. | 7P-7913 | [2] | MOUNT | |
| 4. | 8T-8737 | [2] | PLUG-SEAL | |
| 5. | 171-2213 | [1] | CIRCUIT BREAKER AS (135-AMPERE) | |
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6. | 171-2215 | [1] | CIRCUIT BREAKER AS (150-AMPERE) | |
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 7. | 171-8790 | [1] | HARNESS AS (ALTERNATOR AND STARTER) | |
| 8. | 215-9271 | [1] | CABLE AS | |
| 9. | 215-9457 | [1] | CABLE AS | |
| 10. | 235-8633 CY | [1] | SWITCH AS (12-VOLT)(AIR INLET HEATER) | |
| 11. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 12. | 132-5789 | [3] | CLIP (LADDER) | |
| 13. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 14. | 3E-3361 | [1] | PLUG AS-CONNECTOR (2-PIN) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES WEDGE & PLUG AS) | ||||
| 102-8812 | [1] | SEAL | ||
| 15. | 4P-7581 | [3] | CLIP (LADDER) | |
| 16. | 6V-5222 M | [2] | BOLT (M8X1.25X85-MM) | |
| 17. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 18. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 19. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| 20. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 21. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 8T-5391 | [1] | BOLT (5/16-18X0.5-IN) | |
| 23. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
| 25. | 194-1591 | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL MODULE) | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES WEDGE & PLUG AS) | ||||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES WEDGE & RECEPTACLE AS) | ||||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES WEDGE & PLUG AS) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES WEDGE & RECEPTACLE AS) | ||||
| 26. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES WEDGE & RECEPTACLE AS) | ||||
| 27. | 105-1797 | [6] | MOUNT | |
| 28. | 3S-2093 | [23] | STRAP-CABLE | |
| 29. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40000515
173-2058: WIRING GP-ENGINE
173-2058 WIRING GP-ENGINE
S/N C7X1-UP
FOR USE WITH 24 VOLT ELECTRICAL SYSTEM
AN ATTACHMENT
S/N C7X1-UP
FOR USE WITH 24 VOLT ELECTRICAL SYSTEM
AN ATTACHMENT
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(STARTER MOTOR) | |
| 2. | 4P-5918 | [4] | CLIP | |
| 3. | 7P-7913 | [2] | MOUNT | |
| 4. | 8T-8737 | [2] | PLUG-SEAL | |
| 5. | 171-8790 | [1] | HARNESS AS (ALTERNATOR AND STARTER) | |
| 6. | 235-9629 Y | [1] | SWITCH GP-MAGNETIC (INLET AIR HEATER) | |
| 7. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 8. | 132-5789 | [3] | CLIP (LADDER) | |
| 9. | 171-2211 | [2] | CIRCUIT BREAKER AS (90-AMPERE) | |
| (EACH INCLUDES) | ||||
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 10. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 11. | 215-9271 | [1] | CABLE AS | |
| 12. | 215-9457 | [1] | CABLE AS | |
| 13. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 14. | 4P-7581 | [3] | CLIP (LADDER) | |
| 15. | 6V-5222 M | [2] | BOLT (M8X1.25X85-MM) | |
| 16. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 17. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 18. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| 19. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 20. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-5391 | [1] | BOLT (5/16-18X0.5-IN) | |
| 22. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
| 24. | 194-1591 | [1] | HARNESS AS-WIRING (ENGINE SENSORS) | |
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| ( EACH INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | SEAL-CONNECTOR | |||
| 25. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 26. | 105-1797 | [6] | MOUNT | |
| 27. | 3S-2093 | [23] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40000516
173-7122: WIRING GP-ENGINE
173-7122 WIRING GP-ENGINE
PROVIDES CUSTOMER CONNECTION AT REAR OF ENGINE
AN ATTACHMENT
PROVIDES CUSTOMER CONNECTION AT REAR OF ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-8335 C | [1] | HARNESS AS-ENGINE (CUSTOMER CONNECTOR) | |
| 165-4893 | [1] | BOOT (70-PIN) | ||
| 115-5674 | [1] | BOOT (UNIT INJECTOR) | ||
| 153-2707 E | CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(170-CM) | |||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 133-0967 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [47] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [47] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 208-0432 | [1] | PLUG | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [71] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 103-0213 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-1813 E | SLEEVE (30-CM) | |||
| 9X-3402 | [35] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [35] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 133-0969 | [1] | CONNECTOR-SOCKET (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.1-M) | |||
| 2. | 3S-2093 | [7] | STRAP-CABLE | |
| 3. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 4. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 208-7553 C | [1] | BRACKET AS | |
| 7C-2644 | [1] | CLIP | ||
| 8C-3334 | [2] | RIVET-TUBULAR | ||
| 6. | 9X-6258 | [4] | SCREW-MACHINE (6-32X0.5-IN) | |
| 7. | 4B-5324 | [4] | WASHER (3.9X9.6X1.2-MM THK) | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40000517
247-4140: WIRING GP-ENGINE
247-4140 WIRING GP-ENGINE
24-VOLT
CANNOT BE USED WITH @@@@@247-4141@@@@@
AN ATTACHMENT
24-VOLT
CANNOT BE USED WITH @@@@@247-4141@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 2. | 3S-2093 | [24] | STRAP-CABLE | |
| 3. | 4P-5918 | [4] | CLIP | |
| 4. | 7P-7913 | [2] | MOUNT | |
| 6. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 105-1797 | [6] | MOUNT | |
| 8. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 135-5975 | [1] | GROMMET-WIRING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 9. | 215-9271 | [1] | CABLE AS | |
| 10. | 215-9457 | [1] | CABLE AS | |
| 11. | 235-9629 Y | [1] | SWITCH GP-MAGNETIC (AIR INTAKE HEATER) | |
| 12. | 239-8471 | [1] | BRACKET | |
| 13. | 247-4139 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 8T-8737 | [52] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 123-1199 | [1] | SEAL-CONNECTOR | ||
| 123-1200 | [1] | SEAL-CABLE (CABLE) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 9X-3401 | [29] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [29] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 14. | 247-8707 | [1] | HARNESS AS-MOTOR (ENGINE START) | |
| 9G-4343 | [4] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9G-4344 | [2] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 2L-0273 | [6] | FITTING (RUBBER) | ||
| 003-9835 | [3] | PROTECTOR | ||
| 15. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 16. | 132-5789 | [4] | CLIP (LADDER) | |
| 18. | 171-2211 | [2] | CIRCUIT BREAKER AS (90-AMPERE) | |
| (EACH INCLUDES) | ||||
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 19. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 20. | 4P-7581 | [3] | CLIP (LADDER) | |
| 21. | 4P-8134 | [1] | CLIP (LADDER) | |
| 22. | 6V-5222 M | [2] | BOLT (M8X1.25X85-MM) | |
| 23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 25. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 26. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| 27. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
| 28. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 29. | 231-3260 | [1] | SPACER (9X18X14-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40000518
247-4141: WIRING GP-ENGINE
247-4141 WIRING GP-ENGINE
12 VOLT
CANNOT BE USED WITH @@@@@247-4140@@@@@
AN ATTACHMENT
12 VOLT
CANNOT BE USED WITH @@@@@247-4140@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7278 Y | [1] | SWITCH GP-MAGNETIC (START RELAY) | |
| 2. | 3S-2093 | [24] | STRAP-CABLE | |
| 3. | 4P-5918 | [4] | CLIP | |
| 4. | 7P-7913 | [2] | MOUNT | |
| 6. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 105-1797 | [6] | MOUNT | |
| 8. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 135-5975 | [1] | GROMMET-WIRING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 9. | 171-2213 | [1] | CIRCUIT BREAKER AS (135-AMPERE) | |
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 10. | 171-2215 | [1] | CIRCUIT BREAKER AS (150-AMPERE) | |
| 253-2111 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 11. | 215-9271 | [1] | CABLE AS | |
| 12. | 215-9457 | [1] | CABLE AS | |
| 13. | 235-8633 Y | [1] | SWITCH AS (12-VOLT)(AIR INLET HEATER RELAY) | |
| 14. | 239-8471 | [1] | BRACKET | |
| 15. | 247-4139 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 8T-8737 | [52] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 123-1199 | [1] | SEAL-CONNECTOR | ||
| 123-1200 | [1] | SEAL-CABLE (CABLE) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 9X-3401 | [29] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [29] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 16. | 247-8707 | [1] | HARNESS AS-MOTOR (ENGINE START) | |
| 9G-4343 | [4] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9G-4344 | [2] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 2L-0273 | [6] | FITTING (RUBBER) | ||
| 003-9835 | [3] | PROTECTOR | ||
| 17. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 18. | 132-5789 | [4] | CLIP (LADDER) | |
| 20. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 21. | 4P-7581 | [3] | CLIP (LADDER) | |
| 22. | 4P-8134 | [1] | CLIP (LADDER) | |
| 23. | 6V-5222 M | [2] | BOLT (M8X1.25X85-MM) | |
| 24. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 26. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 27. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| 28. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
| 29. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| 30. | 231-3260 | [1] | SPACER (9X18X14-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40000519
307-0546: WIRING GP-ENGINE
For full view, you need register
Parts for your C7 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7278 Y | [1] | SWITCH GP-MAGNETIC | |
| 2. | 3S-2093 | [16] | STRAP-CABLE | |
| 3. | 4P-5918 | [3] | CLIP | |
| 4. | 7P-7913 | [2] | MOUNT | |
| 5. | 6V-5222 M | [2] | BOLT (M8X1.25X85-MM) | |
| 6. | 171-2213 | [1] | CIRCUIT BREAKER AS (135-AMPERE) | |
| 7. | 171-2215 | [1] | CIRCUIT BREAKER AS (150-AMPERE) | |
| (EACH CIRCUIT BREAKER AS INCLUDES) | ||||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 8. | 215-9271 | [1] | CABLE AS | |
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 003-9835 | [1] | PROTECTOR | ||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 8C-3055 E | CABLE (2-GA)(55-CM) | |||
| 9. | 215-9457 | [1] | CABLE AS | |
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 8C-3055 E | CABLE (2-GA)(99-CM) | |||
| 10. | 235-8633 Y | [1] | SWITCH AS (12-VOLT) | |
| 11. | 239-8471 | [1] | BRACKET | |
| 12. | 247-4139 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 6I-4347 | [17] | BOOT (4-PIN) | ||
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 115-5672 | [1] | BOOT (ELECTRONIC CONTROL MODULE) | ||
| 115-5674 | [1] | BOOT (UNIT INJECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 13. | 247-8707 | [1] | HARNESS AS-MOTOR (ENGINE START) | |
| 9G-4343 | [4] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9G-4344 | [2] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 2L-8067 | [4] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 003-9835 | [3] | PROTECTOR | ||
| 14. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 15. | 132-5789 | [3] | CLIP (LADDER) | |
| 16. | 231-3260 | [1] | SPACER (9X18X14-MM THK) | |
| 17. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 18. | 4P-7581 | [3] | CLIP (LADDER) | |
| 19. | 4P-8134 | [1] | CLIP (LADDER) | |
| 20. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 21. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 22. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 24. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 25. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 26. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Engine News
Operation and Maintenance Manual
Troubleshooting
