OPERATOR STATION
PANEL GPGENERATORS
REGULATOR GP-VOLTAGEOPERATOR STATION
PANEL GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSPROTECTION GP
BASIC ENGINE
PARTS GP-MISCELLANEOUSSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSPARTS GP-MISCELLANEOUS
SERVICE GP
OPERATOR STATION
PANEL GP
#SEBP40010300
208-0590: MOUNTING GP-CONTROL PANEL
208-0590 MOUNTING GP-CONTROL PANEL -MARINE POWER DISPLAY
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP40010301
129-0308: POTENTIOMETER
129-0308 POTENTIOMETER
2000 VOLT, 2 WATT. PROVIDES A 10 TURN VOLTAGE ADJUSTMENT POTENTIOMETER FOR USE WITH VOLTAGE REGULATOR
AN ATTACHMENT
2000 VOLT, 2 WATT. PROVIDES A 10 TURN VOLTAGE ADJUSTMENT POTENTIOMETER FOR USE WITH VOLTAGE REGULATOR
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP40010302
262-4924: VOLTMETER GP
262-4924 VOLTMETER GP
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS#SEBP40010303
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART) | ||
| INSTALL ON RH OR LH SIDE ENGINE IN A VISIBLE LOCATION. DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT. | ||||
| 4P-6379 | [1] | FILM-IDENTIFICATION (FUEL FILTER) | ||
| INSTALL ON SPIN-ON FUEL FILTER. | ||||
| GOSSELIES: | ||||
| INSTALLER SUR LA CARTOUCHE DU FILTRE A FUEL | ||||
| [1] | PLATE-SERIAL NUMBER (ENGINE) | |||
| CONTACT YOUR LOCAL DEALER | ||||
| **REFLATTEN AFTER STAMPING. | ||||
| INSTALL WITH LOCTITE COMPANY DEPEND | ||||
| ADHESIVE ON LH SIDE OF CYLINDER BLOCK TOWARD THE TOP & REAR FLAT AREA | ||||
| THAT WOULD BE ABOVE & BEHIND THE ECM WHEN MOUNTED. | ||||
| [1] | PLATE-SERIAL NUMBER (ENGINE) | |||
| CONTACT YOUR LOCAL DEALER | ||||
| ** REFLATTEN AFTER STAMPING. | ||||
| INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON LH SIDE OF CYLINDER BLOCK TOWARD THE TOP & REAR FLAT AREA THAT | ||||
| WOULD BE ABOVE & BEHIND THE ECM WHEN MOUNTED. | ||||
| 7E-8050 | [1] | FILM GP (EPA CERTIFICATION) | ||
| CONTACT YOUR LOCAL DEALER | ||||
| INSTALL ON CENTER OF VALVE COVER WITH TEXT READABLE FROM LH SIDE OF ENGINE AFFIX NEXT TO IMO LABEL. | ||||
| THIS LABEL WILL BE CLOSEST TO THE REAR OF THE ENGINE. | ||||
| INTALL LAMINATE 178-0478 OVER FILM. | ||||
| [1] | FILM (INFORMATION)(ENGINE SERIAL NUMBER) | |||
| CONTACT YOUR LOCAL DEALER | ||||
| INSTALL ON LH SIDE TOWARDS REAR OF ENGINE BELOW VALVE COVER ON VALVE COVER BASE. | ||||
| 8C-8902 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILTER) | ||
| INSTALL ON SPIN-ON OIL FILTER. | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| INSTALL PRESTART TAG. | ||||
| 115-5852 | [2] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| CONTACT YOUR LOCAL DEALER | ||||
| INSTALL CENTERED ON VALVE COVER VIEWED FROM LEFT SIDE | ||||
| THIS LABEL WILL BE TO THE LEFT OF THE IMO LABEL & TO THE RIGHT OF THE OIL FILL. | ||||
| PUT EXTRA LABEL IN PLASTIC BAG ATTACHED TO ENGINE. | ||||
| INSTALL LAMINATE 122-9761 OVER FILM | ||||
| 136-9066 | [1] | FILM-INFORMATION (ENGINE OIL) | ||
| INSTALL ON TOP OF VALVE COVER ON LEFT REAR ANGLED FLAT SURFACE. NEAR OIL FILL CAP. | ||||
| [1] | FILM GP (CERTIFICATION) | |||
| CONTACT YOUR LOCAL DEALER | ||||
| INSTALL ON TOP OF VALVE COVER READABLE FROM LH SIDE OF ENGINE. | ||||
| THIS WILL BE INSTALLED BETWEEN THE ENGINE INFO & EPA LABEL. | ||||
| INSTALL LAMINATE OVER SILVER FILM. | ||||
| 191-6559 | [1] | FILM GP (SERIAL NUMBER PLATE) | ||
| CONTACT YOUR LOCAL DEALER | ||||
| 224-8945 | [1] | FILM-WARNING (DO NOT USE ETHER, U.S.) | ||
| INSTALL CENTERED ON AIR CLEANER COVER | ||||
| 225-4256 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE, U.S.) | ||
| INSTALL ON TOP FLAT SURFACE OF EXPANSION TANK TOWARD FRONT OF ENGINE. | ||||
| 228-3581 | [2] | FILM-WARNING (DO NOT OPERATE, READ OMM) | ||
| INSTALL ONE EACH SIDE OF ENGINE ON VERTICAL SURFACE OF VALVE COVER. | ||||
| 233-0060 | [2] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | ||
| INSTALL ON INSIDE SURFACE OF LIFTING EYES, JUST BELOW EYES. | ||||
#SEBP40010304
308-9441: COVER-PROTECTION
308-9441 COVER-PROTECTION
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP40010305
249-7751: KIT-ENGINE PARTS
249-7751 KIT-ENGINE PARTS -MARINE CLASSIFICATION SOCIETY
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CYLINDER HEAD AS | ||
| 241-9059 Y | [1] | TURBOCHARGER GP | ||
| 242-0857 | [1] | INJECTOR GP-FUEL | ||
| 3E-4354 | [2] | BALL | ||
| 220-0684 | [4] | SCREW-MACHINE (M3X0.5X40.3-MM) | ||
| 197-9345 | [1] | CROWN AS-PISTON | ||
| 187-1315 | [1] | GASKET AS | ||
| 205-1320 | [1] | GEAR AS-IDLER (50-TEETH) | ||
| 213-3190 | [1] | BEARING (PISTON) | ||
| 151-2939 | [1] | BEARING-MAIN | ||
| 8C-4984 M | [5] | BOLT (M8X1.25X150-MM) | ||
| 175-0454 M | [2] | BOLT (M16X2X160-MM) | ||
| 263-2915 M | [26] | BOLT-12 POINT HEAD (M16X2X180-MM) | ||
| 235-9651 M | [2] | BOLT-SOCKET HEAD (M8X1.25X65-MM) | ||
| 203-5805 | [1] | BUSHING (CAMSHAFT) | ||
| 203-6090 | [1] | BUSHING (CAMSHAFT) | ||
| 216-5586 | [1] | BUSHING (CAMSHAFT) | ||
| 7M-7273 | [1] | GASKET | ||
| 2W-8147 | [1] | GEAR (50-TEETH) | ||
| 224-3247 | [1] | GEAR (100-TEETH) | ||
| 260-4856 | [4] | GUIDE-VALVE | ||
| 1B-8705 | [2] | KEY-WOODRUFF | ||
| 2A-4429 | [8] | LOCK-RETAINER | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 166-3648 | [1] | PIN-PISTON | ||
| 246-3150 | [2] | PLATE-THRUST | ||
| 9S-8010 | [2] | PLUG | ||
| 2A-3746 | [1] | PLUG-CUP | ||
| 3B-0623 | [3] | PLUG-CUP | ||
| 8M-5860 | [3] | PLUG-CUP | ||
| 9S-8004 | [5] | PLUG (9/16-18-THD) | ||
| 9S-8005 | [2] | PLUG (3/4-16-THD) | ||
| 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | ||
| 211-2134 | [4] | RETAINER | ||
| 347-2381 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 347-2382 | [1] | RING-PISTON (OIL CONTROL) | ||
| 347-2380 | [1] | RING-PISTON (TOP) | ||
| 7X-2908 | [2] | RING-RETAINING (PISTON) | ||
| 160-8199 | [1] | ROD AS (PISTON) | ||
| 169-8598 | [1] | SEAL-O-RING | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 109-3207 | [1] | SEAL-O-RING | ||
| 148-2903 | [1] | SEAL-O-RING | ||
| 153-4906 | [5] | SEAL-O-RING | ||
| 183-2317 | [2] | SEAL-O-RING | ||
| 163-2478 | [4] | SEAL-VALVE STEM | ||
| 217-0609 | [2] | SEAT-VALVE SPRING | ||
| 324-7380 | [1] | SKIRT-PISTON | ||
| 190-6115 | [4] | SPRING-VALVE (INNER) | ||
| 190-6117 | [4] | SPRING-VALVE (OUTER) | ||
| 188-3122 | [2] | VALVE-EXHAUST | ||
| 187-4123 | [2] | VALVE-INLET | ||
| 9X-8268 | [28] | WASHER (17.5X30X3.5-MM THK) | ||
| 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40010306
293-8267: KIT-GASKET
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| INCLUDES 2 SEALS | ||||
#SEBP40010307
297-4841: KIT-SEAL
297-4841 KIT-SEAL -SINGLE FUEL INJECTOR
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS#SEBP40010308
205-7776: PARTS GP-MISCELLANEOUS
205-7776 PARTS GP-MISCELLANEOUS
PROVIDES REPLACMENT HOSES AND CLAMPS IN THE JACKET WATER AND SEA WATER GPS FOR COSMETIC IMPROVEMENT
AN ATTACHMENT
PROVIDES REPLACMENT HOSES AND CLAMPS IN THE JACKET WATER AND SEA WATER GPS FOR COSMETIC IMPROVEMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4983 J | [1] | CLAMP-HOSE | ||
| 8T-4984 J | [4] | CLAMP-HOSE | ||
| 7X-7958 J | [1] | CLAMP-HOSE | ||
| 9X-2488 J | [2] | CLAMP-HOSE | ||
| 8T-6703 S | [6] | CLAMP-HOSE | ||
| 8T-9543 E | HOSE (21-CM EACH) | |||
| 173-1819 S | [1] | HOSE (SEA WATER) | ||
| 192-2156 J | [1] | HOSE | ||
| 194-8510 S | [1] | HOSE | ||
| 194-9567 J | [1] | HOSE | ||
| 205-8846 J | [1] | HOSE | ||
| E | ORDER BY THE CENTIMETER | |||
| J | JACKET WATER HOSES | |||
| S | SEAWATER LINE HOSES | |||
#SEBP40010309
326-2814: SERVICE GP-MONITOR
326-2814 SERVICE GP-MONITOR
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
OPERATOR STATION
PANEL GP
General Service Information
Appendix B. - Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
INSTALLATION AND OPERATION LOAD SHARING MODULE
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix C. - EMI Control in Electronic Governing Systems
INSTALLATION AND OPERATION LOAD SHARING MODULE
INSTALLATION AND OPERATION LOAD SHARING MODULE
Engine News
An Alternate Fuel Pressure Gauge for Improved Durability in Some Generator Set Applications {7456}
2013/12/20
2013/12/20
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Engine Air Cleaner Service Indicator - Inspect - If Equipped
C9 Marine Auxiliary and Generator Set Engines
C9 Marine Auxiliary and Generator Set Engines
Systems Operation
Testing and Adjusting
Troubleshooting
Service Magazine
