285-7338 WIRING GP-MACHINE S/N AWF412-603 PART OF 285-7326 ELECTRICAL AR 826H LANDFILL COMPACTOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 285-7338 WIRING GP-
1. 285-7338 WIRING GP-
2. 227-4423 WIRING GP-
3. 297-5204 WIRING GP-
4. 263-4875 WIRING GP-
5. 285-7340 WIRING GP-
6. 263-3849 WIRING GP-
7. 257-4183 WIRING GP-

POWER TRAIN

WHEEL GP

8. 195-7121 ADAPTER-WH

AXLE GP

9. 229-8207 AXLE AR-FI
0. INFORMATION

LANDFILL COMPACTOR 826H LANDFILL COMPACTOR AWF
826H Landfill Compactor AWF00001-UP (MACHINE) POWERED BY C15 Engine SEBP4005 826H AWF (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

227-4425 WIRING GP-MACHINE

285-7338 WIRING GP-MACHINE

227-4423 WIRING GP-REAR

297-5204 WIRING GP-REAR

#SEBP40050450

285-7338: WIRING GP-MACHINE

WIRING GP-MACHINE

285-7338 WIRING GP-MACHINE
S/N AWF412-603
PART OF 285-7326 ELECTRICAL AR

i02686123 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6W-8355	[1]	SHEET
2.	8R-9137	[1]	ANGLE
3.	9X-6772	[9]	STRAP-CABLE
4.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
5.	116-0118	[1]	CLIP
6.	116-4491	[3]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	118-9901	[1]	SPACER (12X20X10-MM THK)
8.	121-1340	[1]	ANGLE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	142-1657	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
11.	160-0564	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
12.	164-7577 Y	[1]	SWITCH GP-BYPASS (TRANSMISSION FILTER)
13.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (28-CM)
14.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-5677 D		SLEEVE (0.6-M)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
15.	193-9131	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	199-4888	[1]	HARNESS AS-BRAKE
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[5]	PLUG-SEAL
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
17.	200-2326	[1]	BRACKET AS
18.	204-2281	[3]	STRAP-CABLE
19.	285-7454	[1]	HARNESS AS-CHASSIS (MAIN)
	8N-1521	[4]	BELL AS-END
	274-3774	[2]	CAP-CONNECTOR
	274-3775	[1]	CAP-CONNECTOR
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	177-9656	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	177-9653	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	7T-0093	[3]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1542	[2]	PIN-CONNECTOR (10-GA)
	8N-1544	[1]	PIN-CONNECTOR (8-GA)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-6856	[16]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1514	[1]	PLUG AS-CONNECTOR (37-PIN)
	8N-1518	[2]	PLUG AS-CONNECTOR (25-PIN)
	7G-7917	[16]	PLUG-SEAL
	7G-7918	[11]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	7G-7920	[5]	PLUG-SEAL
	8T-8737	[14]	PLUG-SEAL
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	114-8843 E		SLEEVE-PLASTIC (220-CM)
	E		SLEEVE-PLASTIC (100-CM)
	114-8845 E		SLEEVE-PLASTIC (60-CM)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	8N-1541	[5]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[3]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[3]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[34]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-6857	[47]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-6772	[10]	STRAP-CABLE
	131-1481	[1]	TERMINAL AS-RING
	9G-4344	[1]	TERMINAL-RING (4-GA, 1/2-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	131-1492	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1500	[1]	TERMINAL AS-RING
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	131-1507	[1]	TERMINAL AS-RING
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)
	155-2258	[2]	WEDGE-PLUG LOCK (12-PIN)
	155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
	9X-0196	[2]	TERMINAL AS (16-GA)
20.	288-8390 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
21.	296-4267	[1]	HARNESS AS-HYDRAULIC TANK (TEMPERATURE SENSOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	8T-8737	[4]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (40-CM)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
22.	033-8248	[3]	CLIP (LOOP)
23.	130-5300	[10]	CLIP
24.	147-0385	[1]	CLIP
25.	149-7738	[1]	CLIP (LOOP)
26.	177-4562	[5]	GROMMET
27.	1S-0994	[2]	CLIP (LOOP)
28.	204-8000	[3]	MOUNTING-CABLE TIE
29.	3D-6209	[1]	GROMMET
30.	3J-1907	[3]	SEAL-O-RING
31.	3P-2404	[1]	CLIP
32.	4D-7794	[2]	CLIP
33.	4D-8123	[2]	CLIP (LOOP)
34.	4D-9517	[1]	CLIP (SLOT)
35.	4S-1962	[1]	CLIP (LOOP)
36.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
37.	5P-7462	[1]	CLIP (SLOT)
38.	5P-7463	[1]	CLIP (TAB)
39.	5P-9085	[6]	CLIP (LOOP)
40.	6D-4244	[2]	CLIP (LOOP)
41.	6V-0683	[1]	GROMMET
42.	6V-1889	[1]	CLIP (LOOP)
43.	6V-2383	[3]	CLIP
44.	7C-4354	[1]	CLIP
45.	7X-2548 M	[1]	BOLT (M12X1.75X16-MM)
46.	7X-7729	[2]	WASHER (11X25X3-MM THK)
47.	8M-2770	[2]	CLIP (LOOP)
48.	8T-4121	[52]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[1]	NUT (M10X1.5-THD)
50.	8T-4136 M	[26]	BOLT (M10X1.5X25-MM)
51.	8T-4137 M	[21]	BOLT (M10X1.5X20-MM)
52.	8T-4179 M	[1]	BOLT (M12X1.75X20-MM)
53.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
54.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
55.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
56.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
57.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
58.	8T-4244 M	[1]	NUT (M12X1.75-THD)
59.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
60.	9M-4972	[2]	CLIP (LOOP)
61.	9M-8406	[4]	CLIP (LOOP)
62.	9X-8250	[1]	CLIP (LOOP)
63.	223-3490	[1]	CLIP
64.	067-3045	[5]	CLIP (LOOP)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40050451

285-7338: WIRING GP-MACHINE

WIRING GP-MACHINE

285-7338 WIRING GP-MACHINE
S/N AWF604-UP
PART OF 285-7326 ELECTRICAL AR

i03897231 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6W-8355	[1]	SHEET
2.	8R-9137	[1]	ANGLE
3.	9X-6772	[9]	STRAP-CABLE
4.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
5.	116-0118	[1]	CLIP
6.	116-4491	[3]	BRACKET AS
7.	118-9901	[1]	SPACER (12X20X10-MM THK)
8.	121-1340	[1]	ANGLE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9.	124-3019 C	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	142-1657	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
11.	160-0564	[1]	BRACKET AS
12.	164-7577 Y	[1]	SWITCH GP-BYPASS (TRANSMISSION FILTER)
13.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	8T-5677 D		SLEEVE (0.6-M)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-5677 D		SLEEVE (0.6-M)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
15.	193-9131	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	199-4888	[1]	HARNESS AS-BRAKE
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[5]	PLUG-SEAL
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
17.	200-2326	[1]	BRACKET AS
18.	204-2281	[3]	STRAP-CABLE
19.	285-7454	[1]	HARNESS AS-CHASSIS (MAIN)
	8N-1521	[4]	BELL AS-END
	274-3774	[2]	CAP-CONNECTOR
	274-3775	[1]	CAP-CONNECTOR
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	177-9656	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	177-9653	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	7T-0093	[3]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1542	[2]	PIN-CONNECTOR (10-GA)
	8N-1544	[1]	PIN-CONNECTOR (8-GA)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-6856	[16]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1514	[1]	PLUG AS-CONNECTOR (37-PIN)
	8N-1518	[2]	PLUG AS-CONNECTOR (25-PIN)
	7G-7917	[16]	PLUG-SEAL
	7G-7918	[11]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	7G-7920	[5]	PLUG-SEAL
	8T-8737	[14]	PLUG-SEAL
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	114-8843 E		SLEEVE-PLASTIC (220-CM)
	E		SLEEVE-PLASTIC (100-CM)
	114-8845 E		SLEEVE-PLASTIC (60-CM)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	8N-1541	[5]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[3]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[3]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[34]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-6857	[47]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-6772	[10]	STRAP-CABLE
	131-1481	[1]	TERMINAL AS-RING
	9G-4344	[1]	TERMINAL-RING (4-GA, 1/2-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	131-1492	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1500	[1]	TERMINAL AS-RING
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	131-1507	[1]	TERMINAL AS-RING
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)
	155-2258	[2]	WEDGE-PLUG LOCK (12-PIN)
	155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
	9X-0196	[2]	TERMINAL AS (16-GA)
20.	288-8390 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
21.	296-4267	[1]	HARNESS AS-HYDRAULIC TANK (TEMPERATURE SENSOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	8T-8737	[4]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (40-CM)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
22.	033-8248	[3]	CLIP (LOOP)
23.	130-5300	[10]	CLIP
24.	147-0385	[1]	CLIP
25.	149-7738	[1]	CLIP (LOOP)
26.	221-3525 C	[5]	GROMMET
27.	1S-0994	[2]	CLIP (LOOP)
28.	204-8000	[3]	MOUNTING-CABLE TIE
29.	3D-6209	[1]	GROMMET
30.	3J-1907	[3]	SEAL-O-RING
31.	3P-2404	[1]	CLIP
32.	4D-7794	[2]	CLIP
33.	4D-8123	[2]	CLIP (LOOP)
34.	4D-9517	[1]	CLIP (SLOT)
35.	4S-1962	[1]	CLIP (LOOP)
36.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
37.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
38.	154-2302	[1]	SPACER (11X20X15-MM THK)
39.	5P-9085	[6]	CLIP (LOOP)
40.	6D-4244	[3]	CLIP (LOOP)
42.	6V-1889	[1]	CLIP (LOOP)
43.	6V-2383	[3]	CLIP
44.	7C-4354 C	[6]	CLIP
45.	7X-2548 M	[1]	BOLT (M12X1.75X16-MM)
46.	7X-7729	[1]	WASHER (11X25X3-MM THK)
47.	8M-2770	[2]	CLIP (LOOP)
48.	8T-4121 C	[54]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[1]	NUT (M10X1.5-THD)
50.	8T-4136 M	[26]	BOLT (M10X1.5X25-MM)
51.	8T-4137 CM	[21]	BOLT (M10X1.5X20-MM)
52.	8T-4179 M	[1]	BOLT (M12X1.75X20-MM)
53.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
54.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
55.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
56.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
57.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
58.	8T-4244 M	[1]	NUT (M12X1.75-THD)
59.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
60.	9M-4972	[2]	CLIP (LOOP)
61.	9M-8406	[4]	CLIP (LOOP)
62.	9X-8250	[1]	CLIP (LOOP)
63.	223-3490	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40050452

227-4423: WIRING GP-REAR

WIRING GP-REAR

227-4423 WIRING GP-REAR
S/N AWF1-411
PART OF 234-4335 ELECTRICAL AR

i01985333 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6772	[1]	STRAP-CABLE
2.	118-9901	[1]	SPACER (12X20X10-MM THK)
3.	127-9323	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	263-7137	[1]	HARNESS AS-REAR CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[4]	PLUG-SEAL
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
5.	033-8248	[5]	CLIP (LOOP)
6.	115-3073	[1]	CLIP AS-CONNECTING
7.	147-0385	[3]	CLIP
8.	4D-9517	[1]	CLIP (SLOT)
9.	4K-8864	[1]	CLIP (LOOP)
10.	8M-2770	[11]	CLIP (LOOP)
11.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
13.	8T-4137 M	[14]	BOLT (M10X1.5X20-MM)
14.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP40050453

297-5204: WIRING GP-REAR

WIRING GP-REAR

297-5204 WIRING GP-REAR
S/N AWF412-UP
PART OF 285-7326 ELECTRICAL AR

i02685916 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6772	[1]	STRAP-CABLE
2.	118-9901	[1]	SPACER (12X20X10-MM THK)
3.	127-9323	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	297-5206	[1]	HARNESS AS-REAR CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[5]	PLUG-SEAL
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
5.	033-8248	[2]	CLIP (LOOP)
6.	130-5300	[1]	CLIP
7.	147-0385	[2]	CLIP
8.	4D-8123	[1]	CLIP (LOOP)
9.	4D-9517	[2]	CLIP (SLOT)
10.	4K-8864	[1]	CLIP (LOOP)
11.	5P-9085	[3]	CLIP (LOOP)
12.	8M-2770	[11]	CLIP (LOOP)
13.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
15.	8T-4137 M	[14]	BOLT (M10X1.5X20-MM)
16.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP40050454

263-4875: WIRING GP-RELAY PANEL

WIRING GP-RELAY PANEL

263-4875 WIRING GP-RELAY PANEL
S/N AWF1-411
PART OF 227-4425 WIRING GP-MACHINE

i02238145 SEBP4005

2634875 WIRING GP-RELAY PANEL Parts scheme

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7K-1181 B	[3]	STRAP-CABLE
3.	7V-9275	[1]	STRAP
4.	116-5896	[1]	PLATE-IDENTIFICATION (ALTERNATOR, MAIN BREAKERS)
5.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
6.	157-1356	[1]	SWITCH AS-TOGGLE (POWER TRAIN GUARD ACTUATOR)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	9G-3695	[2]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	157-1364	[1]	SWITCH AS-TOGGLE (CRANKCASE GUARD ACTUATOR)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
9A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
10.	177-9122	[1]	PLATE-IDENTIFICATION (CIRCUIT BREAKER)
11.	184-1590	[1]	PLATE-IDENTIFICATION (ENGINE ECM BREAKER)
12.	190-7630	[1]	PLATE-INSTRUCTION (POWER GUARD, SHUTDOWN CONTROL)
13.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)
14.	263-4879	[1]	HARNESS AS-PANEL (RELAY)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	3T-3043	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8T-8737	[17]	PLUG-SEAL
	9X-6772	[2]	STRAP-CABLE
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
15.	263-7314	[1]	PLATE AS
	6V-9632 M	[4]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	3K-8106	[6]	SCREW-MACHINE (8-32X1-IN)
17.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
18.	4B-1222	[4]	SCREW-MACHINE
19.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
20.	4B-4863	[14]	WASHER (4.7X11X1.2-MM THK)
21.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
22.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
23.	6D-5801	[4]	LOCKNUT (8-32-THD)
24.	6N-9349	[1]	CIRCUIT BREAKER AS (30-AMPERE)(FUSE)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
25.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ECM)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
26.	6V-1889	[2]	CLIP (LOOP)
27.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
29.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40050455

285-7340: WIRING GP-RELAY PANEL

WIRING GP-RELAY PANEL

285-7340 WIRING GP-RELAY PANEL
S/N AWF412-UP
PART OF 285-7326 ELECTRICAL AR

i02682974 SEBP4005

2857340 WIRING GP-RELAY PANEL Parts scheme

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	9X-6772	[8]	STRAP-CABLE
3.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
4.	124-3019	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
6.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	177-9122	[1]	PLATE-IDENTIFICATION (CIRCUIT BREAKER)(UNSWITCHED BAT POWER TO CAB)
8.	184-1590	[1]	PLATE-IDENTIFICATION (ENGINE ECM BREAKER)
9.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
10.	285-7455	[1]	HARNESS AS-PANEL (RELAY)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	8N-1521	[1]	BELL AS-END
11.	296-4282	[1]	PLATE AS
12.	300-8684	[1]	FILM-IDENTIFICATION (CIRCUIT BREAKER)
13.	300-8687	[1]	FILM-IDENTIFICATION (CIRCUIT BREAKER)
14.	130-5300	[3]	CLIP
15.	171-2205	[1]	CIRCUIT BREAKER AS (40-AMPERE)(START RELAY)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
16.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
17.	3K-8106	[6]	SCREW-MACHINE (8-32X1-IN)
18.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
19.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
20.	4B-4863	[6]	WASHER (4.7X11X1.2-MM THK)
21.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
22.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
23.	6N-9349	[1]	CIRCUIT BREAKER AS (30-AMPERE)(UNSWITCHED BAT POWER TO CAB)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
24.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ECM)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
25.	7X-7729	[2]	WASHER (11X25X3-MM THK)
26.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
27.	8T-4133 M	[1]	NUT (M10X1.5-THD)
28.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
29.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
30.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
31.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
32.	9D-9747	[2]	WASHER
33.	9X-8250	[2]	CLIP (LOOP)
34.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40050456

263-3849: WIRING GP-SENSOR

WIRING GP-SENSOR

263-3849 WIRING GP-SENSOR -AUTOMATIC BLADE POSITIONING
S/N AWF1-UP
PART OF 234-4335, 285-7326 ELECTRICAL AR

i02212230 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	263-3835	[1]	HARNESS AS-SENSOR (AUTOMATIC BLADE POSITIONING)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[1]	PLUG-SEAL
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
2.	263-7406	[1]	PLATE
3.	263-7410	[1]	BRACKET
4.	263-7414	[1]	BRACKET AS
5.	130-5300	[1]	CLIP
6.	5P-9085	[5]	CLIP (LOOP)
7.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4133 M	[1]	NUT (M10X1.5-THD)
9.	8T-4137 M	[9]	BOLT (M10X1.5X20-MM)
10.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
11.	9X-7345	[1]	GROMMET
	M		METRIC PART

#SEBP40050457

257-4183: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

257-4183 WIRING GP-UNIT INJECTOR
S/N AWF1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION

i02170491 SEBP4005

2574183 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7E-6513 F	[1]	CONNECTOR AS
091-7473 F	[2]	SPLICE-WIRE
F		NOT SHOWN

#SEBP40050458

195-7121: ADAPTER-WHEEL TIP

ADAPTER-WHEEL TIP

195-7121 ADAPTER-WHEEL TIP
S/N AWF1-UP
SPIN-ON
AN ATTACHMENT

i01994440 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP40050459

229-8207: AXLE AR-FIXED

AXLE AR-FIXED

229-8207 AXLE AR-FIXED -FRONT
S/N AWF1-UP
PART OF 369-1775 OPTION AR-CONVERSION, 226-9593 POWER TRAIN AR
ALSO AN ATTACHMENT

i01983795 SEBP4005

For full view, you need register

Parts for your 826H LANDFILL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
173-0547 Y	[1]	AXLE GP-FIXED (FRONT)
208-5972 Y	[1]	BRAKE GP-SERVICE (DAMPER)(RH)
208-5974 Y	[1]	BRAKE GP-SERVICE (DAMPER)(LH)
230-4937 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP (FIXED AXLE)
124-3758 Y	[1]	LINES GP-SERVICE BRAKE
234-7798 Y	[2]	WHEEL & FINAL DRIVE GP
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor

Battery Disconnect Switch
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor

Circuit Breakers - Reset
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor

Fuses - Replace
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Update for the Reversing Fan on the Landfill Compactor{1386, 1387, 138R, 1408, 1920, 5057, 5067, 5479, 7620}
Update for the Reversing Fan on the Landfill Compactor{1386, 1387, 138R, 1408, 1920, 5057, 5067, 5479, 7620}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation of the 2Q-8781 Rear Vision Camera on the 824H, 834H Wheel Dozer, 825H Soil Compactor, 826H, 836H Landfill Compactor, and 988H Wheel Loader{1408, 7348, 7490}
Installation of the 2Q-8781 Rear Vision Camera on the 824H, 834H Wheel Dozer, 825H Soil Compactor, 826H, 836H Landfill Compactor, and 988H Wheel Loader{1408, 7348, 7490}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Replacing Command Control Steering (CCS) Harness on 824H Wheel Dozer, 825H Soil Compactor, and 826H Landfill Compactor Machine Systems{1408, 4309, 4343}
Procedure for Replacing Command Control Steering (CCS) Harness on 824H Wheel Dozer, 825H Soil Compactor, and 826H Landfill Compactor Machine Systems{1408, 4309, 4343}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}

Cylinder Sensor Systematic (PSC) Issue{1905, 1911, 430S, 5102, 5104, 5736}
Cylinder Sensor Systematic (PSC) Issue{1905, 1911, 430S, 5102, 5104, 5736}

Failure of CMPD Display Due to Loosening of Object Detection Camera Cable Connectors on Certain Cat Products{1408, 7347, 7348}
Failure of CMPD Display Due to Loosening of Object Detection Camera Cable Connectors on Certain Cat Products{1408, 7347, 7348}

Specifications

Pressure Switch (Service Brake Oil)
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Braking System

Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines

Temperature Sensor (Hydraulic Oil)
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

Pressure Switch (Parking Brake Oil)
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Braking System

Temperature Sensor (Transmission Charge Oil)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer

Temperature Sensor (Torque Converter Oil)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer

STIC Control
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer

Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

Systems Operation

Senders
Caterpillar Monitoring System

Switches
Caterpillar Monitoring System

Sensors
Caterpillar Monitoring System

Action Lamp
Caterpillar Monitoring System

Action Alarm
Caterpillar Monitoring System

Start Relay
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Sensors
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Switches
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Switches
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

Sensors
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

Sensors
Payload Control System (PCS) 2.X

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Speed Sensor - Adjust
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Caterpillar Monitoring System

Wiring Harness (Open Circuit) - Test
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Wiring Harness (Short Circuit) - Test
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Electrical Connector - Inspect
Payload Control System (PCS) 2.X

Wiring Harness (Open Circuit) - Test
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

Wiring Harness (Short Circuit) - Test
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Electrical Connector - Inspect
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

System Schematic
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

System Schematic
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X

Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X

Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X

Glossary of Electrical Terms
Payload Control System (PCS) 2.X

System Schematic
Payload Control System (PCS) 2.X

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System

Electrical Component and Connector Locations
Caterpillar Monitoring System

Switch Circuits
Caterpillar Monitoring System

Connector Locations
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0368 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0368 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0177 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0177 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0793 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0793 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Connector Locations
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 081 - CID 0650 - FMI 02
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0650 - FMI 09
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0627 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0627 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 082 - CID 0489 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0489 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0490 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0490 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0650 - FMI 09
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0650 - FMI 11
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0650 - FMI 12
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 082 - CID 0365 - FMI 04
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Electrohydraulic System

MID 081 - CID 0444 - FMI 03
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0444 - FMI 05
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

MID 081 - CID 0444 - FMI 06
824H Wheel Dozer, 825H
Soil Compactor and 826H
Landfill Compactor Power Train

Electrical Component and Connector Locations
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X

Wiring Information
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A Parking Brake Interlock for the Reversing Fan Has Been Added {1408, 1920, 7332}
2007/07/30

A New Harness is Now Used {1120, 1408}
2010/12/23

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

An Improved Backup Alarm is Now Available {7406}
2009/01/05

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2012/03/15

An Update for the Reversing Fan on the Landfill Compactor is Available {1386, 1387, 138R, 1408, 1920, 5057, 5479, 7620}
2010/04/21

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Tension Relief for Temperature Sensor Group Harness Has Been Provided On Certain Cat Product {1408, 3194, 429T}
2011/12/26

An Improved Relay is Now Used on Certain Cat Products {4493}
2011/06/27

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Special Instructions for Replacing Command Control Steering Harnesses on Certain Compactors, Wheel Dozers, and Wheel Loaders Now Available. {1408, 4309, 4310, 4338, 4343}
2012/06/29

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}

Caterpillar Parts SIS Catalog 826H :

227-4425 WIRING GP-MACHINE

296-8073 WIRING GP-HEATER

240-7131 WIRING GP-FRONT

239-5914 WIRING GP-ENGINE ELECTRONIC

285-7338 WIRING GP-MACHINE

227-4423 WIRING GP-REAR

297-5204 WIRING GP-REAR

263-4875 WIRING GP-RELAY PANEL

285-7340 WIRING GP-RELAY PANEL

263-3849 WIRING GP-SENSOR

257-4183 WIRING GP-UNIT INJECTOR

195-7121 ADAPTER-WHEEL TIP

Truck sale:

Caterpillar 826H, Compactors, Construction
- Compactors
FOLEY EQUIPMENT COMPANY

Caterpillar 826H, Petroleum Engines, Construction
- Petroleum Engines
HOLT CAT

849,800

Caterpillar 826H, Compactors, Construction
- Compactors
YANCEY BROS. CO.

5,500

Caterpillar 826H WHEEL, Petroleum Engines, Construction
- Petroleum Engines
HOLT CAT

75,000

Caterpillar 826H, Compactors, Construction
- Compactors
MACALLISTER MACHINERY CO., INC