WORK TOOLS
BLADE GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
LINES GP-DIAGNOSTIC
WORK TOOLS
BLADE GP
#SEBP40050960
155-5456: BLADE GP-STRAIGHT
155-5456 BLADE GP-STRAIGHT
S/N AWF1-UP
PART OF 155-5454 BULLDOZER GP-LANDFILL
AN ATTACHMENT
S/N AWF1-UP
PART OF 155-5454 BULLDOZER GP-LANDFILL
AN ATTACHMENT
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8J-3165 | [1] | EDGE GP-BIT & CUTTING | |
| 6F-0196 | [38] | BOLT-PLOW (7/8-9X2.75-IN) | ||
| 2J-3505 | [38] | NUT-FULL (7/8-9-THD) | ||
| 4T-6505 | [1] | BIT-END (RH) | ||
| 4T-6506 | [1] | BIT-END (LH) | ||
| 4T-6515 | [2] | EDGE-CUTTING | ||
| 2. | 155-5457 | [1] | BULLDOZER AS | |
| 2A. | 8P-9770 | [1] | PLATE | |
| 2B. | 9J-0123 | [1] | TRUNNION | |
| 114-4370 | [1] | MOLDBOARD AS | ||
| 2C. | 3J-3141 | [1] | PLATE | |
| 2D. | 155-5461 | [2] | BOSS |
#SEBP40050961
135-7257: BLADE GP-UNIVERSAL
135-7257 BLADE GP-UNIVERSAL
S/N AWF1-UP
PART OF 263-6869 BULLDOZER AR-LANDFILL
FOR USE WITH @@@@@263-6869@@@@@
AN ATTACHMENT
S/N AWF1-UP
PART OF 263-6869 BULLDOZER AR-LANDFILL
FOR USE WITH @@@@@263-6869@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-2988 | [2] | EDGE-CUTTING | |
| 2. | 4T-3417 | [2] | EDGE-CUTTING | |
| 3. | 4T-8089 | [1] | BIT-END (RH) | |
| 4. | 4T-8090 | [1] | BIT-END (LH) | |
| 5. | 315-0457 | [2] | PIN AS | |
| 6. | 9K-9731 | [2] | SPACER (20.4X28.5X14.2-MM THK) | |
| 7. | 9N-4449 | [28] | SPACER (68X121X1.5-MM THK) | |
| 8. | 9N-4450 | [2] | SPACER (68X120X5-MM THK) | |
| 10. | 259-0223 | [1] | BLADE AS-LANDFILL | |
| 9J-0123 | [1] | TRUNNION | ||
| 259-0206 | [1] | EDGE | ||
| 259-0207 | [2] | EDGE | ||
| 11. | 2J-3507 | [38] | NUT-FULL (1-8-THD) | |
| 12. | 3B-8491 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 13. | 4F-4042 | [38] | BOLT-PLOW (1-8X3-IN) | |
| 14. | 5P-8250 | [38] | WASHER (28X49X5-MM THK) | |
| 15. | 6V-5844 M | [2] | BOLT (M16X2X35-MM) | |
| 16. | 7X-0587 | [2] | WASHER-HARD (17X54X3-MM THK) | |
| M | METRIC PART | |||
#SEBP40050962
237-7348: FILM GP
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-5621 | [2] | FILM-IDENTIFICATION (CATERPILLAR) | |
| 2. | [1] | FILM-STRIPE (826H, LH) | ||
| 3. | [1] | FILM-STRIPE (826H, RH) | ||
| 4. | [1] | FILM-STRIPE (FRONT, LH) | ||
| 5. | [1] | FILM-STRIPE (FRONT, RH) | ||
| 6. | [2] | FILM-IDENTIFICATION (CAT) | ||
| 7. | [2] | FILM-STRIPE (CENTER, FRONT) | ||
| 8. | [2] | FILM-STRIPE (CENTER, REAR) | ||
| 9. | [1] | FILM-STRIPE (REAR, LH) | ||
| 10. | [1] | FILM-STRIPE (REAR, RH) | ||
#SEBP40050963
296-8317: FILM GP
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-5621 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | |
| 2. | [1] | FILM-IDENTIFICATION (826H, HOOD, RH) | ||
| 3. | [1] | FILM-IDENTIFICATION (826H, HOOD, LH) | ||
| 4. | [2] | FILM (CAT) | ||
| 5. | [1] | FILM-STRIPE (RH) | ||
| 6. | [1] | FILM-STRIPE (LH) | ||
| 7. | 253-0861 | [2] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
| 9. | 136-2186 | [1] | FILM-WINDOW (REAR) | |
#SEBP40050964
296-8317: FILM GP
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS#SEBP40050965
160-9874: KIT-GASKET
160-9874 KIT-GASKET -SINGLE CYLINDER LINER
S/N TXG108-UP; LHX1-UP
PART OF 20R-3282, 20R-3288, 447-1524 KIT-ENGINE OVERHAUL
FOR USE WITH PQ0863
S/N TXG108-UP; LHX1-UP
PART OF 20R-3282, 20R-3288, 447-1524 KIT-ENGINE OVERHAUL
FOR USE WITH PQ0863
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | |
| 2. | 110-2220 | [1] | SEAL-LINER (MID) | |
| 3. | 142-7072 | [1] | SEAL-LINER (COOLANT) | |
| 4. | 142-6217 | [1] | SEAL-O-RING | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP40050966
349-1530: KIT-GASKET
349-1530 KIT-GASKET -REAR STRUCTURE
S/N AWF1-UP; TXG108-UP; LHX1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER
PART OF 445-9257 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR 349-6937 KIT-GASKET
FOR USE WITH @@@@@225-8923@@@@@, BET 1-UP
S/N AWF1-UP; TXG108-UP; LHX1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER
PART OF 445-9257 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR 349-6937 KIT-GASKET
FOR USE WITH @@@@@225-8923@@@@@, BET 1-UP
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-1162 | [3] | GASKET (DRAIN PLUG) | |
| 2. | 6L-3397 | [1] | GASKET | |
| 3. | 4H-7869 | [2] | GASKET | |
| 4. | 5H-0244 | [1] | GASKET | |
| 5. | 9Y-6089 | [1] | GASKET | |
| 6. | 155-5619 | [1] | GASKET (FLYWHEEL HOUSING) | |
| 7. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) | |
| 8. | 234-8937 | [1] | SEAL-INTEGRAL (FLYWHEEL HOUSING) | |
| 9. | 250-0466 | [1] | SEAL-O-RING | |
| 10. | 230-3728 | [1] | SEAL-O-RING | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP40050967
349-1533: KIT-GASKET
349-1533 KIT-GASKET -WATER PUMP
S/N AWF1-UP
CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FOR USE WITH @@@@@225-8923@@@@@
FIELD INSTALLATION
S/N AWF1-UP
CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FOR USE WITH @@@@@225-8923@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-0933 | [1] | GASKET | ||
| 4N-3841 | [1] | GASKET | ||
| 125-0434 | [1] | SEAL-INTEGRAL | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| 109-0076 | [1] | SEAL-O-RING | ||
| 109-0077 | [3] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 171-4358 | [2] | SEAL-O-RING | ||
| FOR LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP40050968
444-0533: KIT-GASKET
444-0533 KIT-GASKET -SINGLE CYLINDER HEAD
S/N AWF1-UP; TXG108-UP; LHX1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 445-9257 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@225-8923@@@@@
ALSO FIELD INSTALLATION
S/N AWF1-UP; TXG108-UP; LHX1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 445-9257 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@225-8923@@@@@
ALSO FIELD INSTALLATION
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 157-0670 | [1] | CAP-DUST | ||
| 243-1159 | [18] | FASTENER AS | ||
| (EACH INCLUDES) | ||||
| 149-7378 | [1] | GROMMET | ||
| 7N-7559 | [1] | GASKET | ||
| 4P-4460 | [1] | GASKET | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 227-1204 | [1] | GASKET | ||
| 341-9211 | [1] | GASKET | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 139-3550 | [1] | GASKET-REGULATOR (HOUSING) | ||
| 4N-1156 | [1] | GASKET-REGULATOR COVER | ||
| 357-1752 | [1] | GASKET-TURBOCHARGER | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 5P-5678 D | SEAL (3-M) | |||
| 142-2329 | [1] | SEAL | ||
| 160-7271 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 3E-6772 | [24] | SEAL (WATER) | ||
| 6V-0128 | [1] | SEAL-CONNECTOR | ||
| 198-6068 | [2] | SEAL-INTEGRAL | ||
| 3S-9643 | [2] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-7354 | [4] | SEAL-O-RING | ||
| 3K-0360 | [8] | SEAL-O-RING | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 6D-7128 | [1] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-3831 | [1] | SEAL-O-RING | ||
| 6V-5048 | [4] | SEAL-O-RING | ||
| 6V-6609 | [8] | SEAL-O-RING | ||
| 6V-9027 | [3] | SEAL-O-RING | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 112-3102 | [6] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 163-4565 | [2] | SEAL-O-RING | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 214-7568 | [9] | SEAL-O-RING | ||
| 228-7091 | [1] | SEAL-O-RING | ||
| 238-5078 | [2] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 272-2583 | [1] | SEAL-O-RING | ||
| 464-0509 | [1] | SEAL-O-RING | ||
| 242-9537 | [3] | SEAL-VALVE COVER | ||
| 281-8261 | [6] | SLEEVE AS-EXHAUST | ||
| 357-0351 M | [4] | STUD-TAPERLOCK (M10X1.5X60-MM) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP40050969
228-7025: LINES GP-DIAGNOSTIC
228-7025 LINES GP-DIAGNOSTIC -TRANSMISSION REMOTE PRESSURE TAPS
S/N AWF1-260
PART OF 226-9596 CHASSIS AR
S/N AWF1-260
PART OF 226-9596 CHASSIS AR
For full view, you need register
Parts for your 826H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [4] | STRAP-CABLE | |
| 2. | 185-6250 | [10] | FITTING AS | |
| 3. | 228-7028 | [1] | HOSE AS (XMSN CLUTCH 1 PRESSURE) | |
| 4. | 228-7031 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 228-7080 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 233-5082 | [1] | HOSE AS (XMSN CLUTCH 6 PRESSURE) | |
| 7. | 259-7141 | [1] | BRACKET | |
| 8. | 259-7142 | [1] | HOSE AS (XMSN CLUTCH 2 PRESSURE) | |
| 9. | 259-7144 | [1] | HOSE AS (XMSN CLUTCH 4 PRESSURE) | |
| 10. | 259-7145 | [1] | HOSE AS (XMSN CLUTCH 5 PRESSURE) | |
| 11. | 259-7146 | [1] | HOSE AS | |
| 12. | 259-7147 | [1] | HOSE AS (TORQUE CONVERTER OUTLET PRESS) | |
| 13. | 259-7148 | [1] | HOSE AS | |
| 14. | 259-7149 | [1] | HOSE AS (TORQUE CONVERTER INLET PRESS) | |
| 15. | 259-7150 | [1] | HOSE AS (XMSN CLUTCH 3 PRESSURE) | |
| 16. | 148-8325 | [9] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8641 | [1] | CONNECTOR | ||
| 17. | 148-8351 | [1] | ELBOW AS | |
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-9849 | [1] | ELBOW | ||
| 18. | 148-8368 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8627 | [1] | ELBOW | ||
| 19. | 149-7738 | [1] | CLIP (LOOP) | |
| 20. | 170-4735 | [10] | RING-RETAINING | |
| 21. | 4D-8123 | [4] | CLIP (LOOP) | |
| 22. | 4J-5477 | [10] | SEAL-O-RING | |
| 23. | 6V-0852 | [10] | CAP-DUST | |
| 24. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 26. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 27. | 206-2734 E | GUARD-HOSE (73-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
WORK TOOLS
BLADE GP
Service Magazine
