ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP40170430
164-8405: STARTING MOTOR GP-AIR
164-8405 STARTING MOTOR GP-AIR
LH MOUNTED
CANNOT BE USED WITH LH OIL FILTER, LH FUEL FILTER, LH DUPLEX OIL FILTER, OR LH DUPLEX FUEL FILTER
AN ATTACHMENT
LH MOUNTED
CANNOT BE USED WITH LH OIL FILTER, LH FUEL FILTER, LH DUPLEX OIL FILTER, OR LH DUPLEX FUEL FILTER
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-5105 Y | [1] | STARTING MOTOR GP-AIR | |
| 2. | 6F-5985 I | [1] | HOSE AS | |
| 3. | 6B-3685 | [2] | ELBOW | |
| 4. | 3L-8992 | [1] | NIPPLE-PIPE | |
| 5. | 172-0208 Y | [1] | LUBRICATOR GP-AIR MOTOR | |
| 6. | 7V-1073 I | [1] | HOSE AS | |
| 7. | 3N-7268 I | [1] | HOSE AS | |
| 8. | 6G-9581 I | [1] | HOSE AS | |
| 9. | 2N-1287 | [1] | ELBOW-FLARED | |
| 10. | 349-8383 | [1] | ADAPTER AS | |
| 7J-4026 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 11. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 12. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 14. | 4P-1578 | [1] | PLATE | |
| 15. | 4N-3410 | [1] | VALVE AS-CONTROL (STARTING) | |
| 2W-0629 | [1] | KNOB-ENGINE START | ||
| 16. | 6F-8857 | [1] | NIPPLE-PIPE | |
| 17. | 8N-8446 | [1] | ELBOW | |
| 18. | 8N-8451 | [1] | GASKET | |
| 19. | 8T-9391 | [6] | BOLT (1/2-13X3.75-IN) | |
| 20. | 5N-8743 | [1] | BRACKET | |
| 21. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 23. | 8N-8447 | [1] | ELBOW | |
| 24. | 8N-8452 | [1] | GASKET | |
| 25. | 6V-4432 | [2] | BOLT (1/2-13X4-IN) | |
| 26. | 8N-8488 | [1] | SILENCER-AIR STARTING | |
| 27. | 9Y-6089 | [1] | GASKET | |
| 28. | 6K-1972 | [2] | ELBOW-FLARED | |
| 29. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 30. | 3P-1823 | [1] | ADAPTER-PIPE | |
| 31. | 5B-7661 | [1] | FITTING | |
| 32. | 4N-3411 J | [1] | VALVE GP-RELAY (AIR STARTING) | |
| 33. | 5L-2534 | [1] | U-BOLT | |
| 34. | 5N-2728 | [1] | ELBOW | |
| 35. | 8L-6557 | [2] | CONNECTOR | |
| 36. | 5B-7643 | [1] | NIPPLE-PIPE | |
| 37. | 2V-5956 I | [1] | HOSE AS | |
| 38. | 4S-6399 | [1] | CONNECTOR | |
| 39. | 132-5789 | [2] | CLIP | |
| 40. | 091-0081 | [2] | SPACER (10.5X20X10-MM THK) | |
| 41. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 42. | 9X-6772 | [2] | STRAP-CABLE | |
| 43. | 6K-0806 B | [4] | STRAP-CABLE | |
| 44. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7C-5105 J | [1] | KIT-VALVE SEAL (AIR STARTING) | ||
| (INCLUDES SEALS, RETAINER & BUMPER) | ||||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40170431
164-8406: STARTING MOTOR GP-AIR
164-8406 STARTING MOTOR GP-AIR
RH MOUNTED
CANNOT BE USED WITH RH DUPLEX OIL FILTER, OR RH DUPLEX FUEL FILTER
AN ATTACHMENT
RH MOUNTED
CANNOT BE USED WITH RH DUPLEX OIL FILTER, OR RH DUPLEX FUEL FILTER
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 349-8383 | [1] | ADAPTER AS | |
| 7J-4026 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 2. | 3N-7241 I | [1] | HOSE AS | |
| 3. | 3N-7268 I | [1] | HOSE AS | |
| 4. | 4N-3410 | [1] | VALVE AS-CONTROL (STARTING) | |
| 2W-0629 | [1] | KNOB-ENGINE START | ||
| 5. | 4N-3411 J | [1] | VALVE GP-RELAY (AIR STARTING) | |
| 6. | 4P-1578 | [1] | PLATE | |
| 7. | 4W-5106 Y | [1] | STARTING MOTOR GP-AIR | |
| 8. | 5N-2728 | [1] | ELBOW | |
| 9. | 5N-8743 | [1] | BRACKET | |
| 10. | 6F-5985 I | [1] | HOSE AS | |
| 11. | 6K-0806 B | [4] | STRAP-CABLE | |
| 12. | 7V-1073 I | [1] | HOSE AS | |
| 13. | 8N-8446 | [1] | ELBOW | |
| 14. | 8N-8447 | [1] | ELBOW | |
| 15. | 8N-8451 | [1] | GASKET | |
| 16. | 8N-8452 | [1] | GASKET | |
| 17. | 8N-8488 | [1] | SILENCER-AIR STARTING | |
| 18. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 19. | 9G-4524 I | [1] | HOSE AS | |
| 20. | 9X-6772 | [2] | STRAP-CABLE | |
| 21. | 9Y-6089 | [1] | GASKET | |
| 22. | 091-0081 | [2] | SPACER (10.5X20X10-MM THK) | |
| 23. | 172-0208 Y | [1] | LUBRICATOR GP-AIR MOTOR | |
| 24. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 25. | 6V-4432 | [2] | BOLT (1/2-13X4-IN) | |
| 26. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 27. | 132-5789 | [2] | CLIP | |
| 28. | 8T-9391 | [6] | BOLT (1/2-13X3.75-IN) | |
| 29. | 2N-1287 | [1] | ELBOW-FLARED | |
| 30. | 3L-8992 | [1] | NIPPLE-PIPE | |
| 31. | 3P-1823 | [1] | ADAPTER-PIPE | |
| 32. | 5B-7643 | [1] | NIPPLE-PIPE | |
| 33. | 5B-7661 | [1] | FITTING | |
| 34. | 5J-7303 | [2] | ELBOW | |
| 35. | 5L-2534 | [1] | U-BOLT | |
| 36. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 37. | 5P-2657 | [1] | ELBOW | |
| 38. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 39. | 6B-3685 | [2] | ELBOW | |
| 40. | 6F-8857 | [1] | NIPPLE-PIPE | |
| 42. | 214-7568 | [1] | SEAL-O-RING | |
| 43. | 176-2543 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 44. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 45. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 46. | 8L-6557 | [1] | CONNECTOR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7C-5105 J | [1] | KIT-VALVE SEAL (AIR STARTING) | ||
| (INCLUDES RETAINER, BUMPER & SEALS) | ||||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40170432
382-9606: STARTING MOTOR GP-AIR
382-9606 STARTING MOTOR GP-AIR -RH
STANDARD ROTATION
PART OF 382-9609 STARTING MOTOR GP-AIR
AN ATTACHMENT
STANDARD ROTATION
PART OF 382-9609 STARTING MOTOR GP-AIR
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 297-5479 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 2. | 6K-1972 | [4] | ELBOW-FLARED | |
| 3. | 224-7696 E | HOSE (31-CM) | ||
| 3A. | 224-7696 E | HOSE (19-CM) | ||
| 4. | 146-3367 | [4] | COUPLING AS-PERMANENT | |
| 5. | 3M-7045 | [1] | PLUG (3/4-14 NPT-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 278-0513 | [1] | KIT-STARTER REPAIR | ||
| (INCLUDES STARTER DRIVE) | ||||
| 385-1748 | [1] | KIT-ENGINE OVERHAUL | ||
| (INCLUDES 0-RINGS, BEARINGS, SCREWS, RING, SPACERS, SHIMS, ELEMENTS, SHAFTS, LOCTITE & WASHERS) | ||||
| 465-8142 | [1] | KIT-SERVICE (STARTING MOTOR) | ||
| (INCLUDES O-RINGS, SCREWS & LOCTITE) | ||||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40170433
382-9609: STARTING MOTOR GP-AIR
382-9609 STARTING MOTOR GP-AIR -RH
AN ATTACHMENT
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS#SEBP40170434
4W-5105: STARTING MOTOR GP-AIR
4W-5105 STARTING MOTOR GP-AIR
PART OF 164-8405 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
PART OF 164-8405 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3937 M | [1] | BOLT (M5X0.8X20-MM) | |
| 5N-8378 | [1] | NUT-ROTOR CLAMP (M5X0.8-THD) | ||
| 2. | 5N-8363 | [1] | COVER AS | |
| 3. | 4D-3118 | [3] | PLUG-PIPE | |
| 4. | 5N-8383 | [1] | CYLINDER | |
| 5. | 6V-3916 | [1] | BALL BEARING | |
| 1L-8497 | [1] | RING-SNAP (SMALL) | ||
| 6J-7855 | [1] | RING-LOCK (LARGE) | ||
| 6. | 5N-8375 | [1] | CUP-SPRING | |
| 6V-3935 | [1] | RING-RETAINING | ||
| 7. | 5N-8381 | [1] | SPRING-CLUTCH | |
| 8. | 2W-6081 | [1] | GEAR AS-DRIVE (37-TEETH) | |
| 9. | 5N-9574 | [1] | JAW AS-CLUTCH | |
| 10. | 5N-8387 | [1] | CASE-GEAR | |
| 11. | 5N-8424 | [1] | BULKHEAD | |
| 12. | 6V-3940 M | [8] | BOLT (M8X1.25X25-MM) | |
| 3B-4505 | [8] | LOCKWASHER | ||
| 13. | 3J-7719 | [1] | RING-RETAINING (INNER)(INNER) | |
| 6V-3971 | [1] | RING-RETAINING (OUTER) | ||
| 14. | 7F-8671 | [1] | BALL BEARING | |
| 15. | 5N-8428 | [1] | WASHER-GEAR (10.1X34X15.5-MM THK) | |
| 16. | 5N-8427 M | [4] | BOLT-MOTOR (M10X1.5X180-MM) | |
| 17. | 6V-3959 | [5] | LOCKWASHER | |
| 18. | 5N-8403 M | [1] | SCREW-PINION (M12X1.25X70-MM) | |
| 5N-8425 | [1] | WASHER (12.2X41.5X4.5-MM THK) | ||
| 19. | 2W-6078 | [1] | PINION-DRIVE (12-TEETH) | |
| 20. | 5N-8380 | [1] | SPRING-PINION | |
| 5N-8374 | [1] | SLEEVE-SPRING | ||
| 21. | 2W-6082 | [1] | KIT-DRIVE (AIR STARTING MOTOR) | |
| (INCLUDES O-RINGS, HOUSING, BEARING, SEAL & VENT) | ||||
| 22. | 8B-7624 | [1] | BALL BEARING | |
| 23. | 5N-8379 | [1] | SEAT-SPRING | |
| 24. | 5N-8372 | [1] | SPRING-RETURN | |
| 25. | 5N-8384 | [1] | SHAFT-DRIVE | |
| 26. | 6V-3938 M | [1] | BOLT (M10X1.5X20-MM) | |
| 27. | 5P-9514 | [1] | BALL BEARING | |
| 28. | 5N-8377 | [1] | BEARING-DRIVE SHAFT | |
| 29. | 5N-8373 | [1] | PISTON | |
| 30. | 6V-3939 M | [1] | BOLT (M12X1.75X60-MM) | |
| 31. | 5N-8368 | [1] | PINION-ROTOR (17-TEETH) | |
| 32. | 6V-1394 | [1] | BALL BEARING | |
| 039-4317 | [2] | WASHER-SPRING | ||
| 33. | 5N-8365 | [1] | PLATE-FRONT END | |
| 34. | 5N-8364 | [1] | HOUSING-MOTOR | |
| 35. | 5N-8388 | [1] | ROTOR | |
| 36. | 5N-8367 | [1] | PLATE-REAR END | |
| AVAILABLE REPAIR KIT(S): | ||||
| 5N-8390 | [1] | KIT-SEAL & VANE (AIR STARTING MOTOR) | ||
| (INCLUDES PINS, RINGS, SEALS & VANE) | ||||
| M | METRIC PART | |||
#SEBP40170435
4W-5106: STARTING MOTOR GP-AIR
4W-5106 STARTING MOTOR GP-AIR
PART OF 164-8406 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
PART OF 164-8406 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3937 M | [1] | BOLT (M5X0.8X20-MM) | |
| 5N-8378 | [1] | NUT-ROTOR CLAMP (M5X0.8-THD) | ||
| 2. | 5N-8363 | [1] | COVER AS | |
| 3. | 4D-3118 | [3] | PLUG-PIPE | |
| 4. | 5N-8383 | [1] | CYLINDER | |
| 5. | 6V-3916 | [1] | BALL BEARING | |
| 1L-8497 | [1] | RING-SNAP (SMALL) | ||
| 6J-7855 | [1] | RING-LOCK (LARGE) | ||
| 6. | 5N-8375 | [1] | CUP-SPRING | |
| 6V-3935 | [1] | RING-RETAINING | ||
| 7. | 5N-8381 | [1] | SPRING-CLUTCH | |
| 8. | 2W-6081 | [1] | GEAR AS-DRIVE (37-TEETH) | |
| 9. | 5N-9574 | [1] | JAW AS-CLUTCH | |
| 10. | 5N-8387 | [1] | CASE-GEAR | |
| 11. | 5N-8424 | [1] | BULKHEAD | |
| 12. | 6V-3940 M | [8] | BOLT (M8X1.25X25-MM) | |
| 3B-4505 | [8] | LOCKWASHER | ||
| 13. | 3J-7719 | [1] | RING-RETAINING (INNER)(INNER) | |
| 6V-3971 | [1] | RING-RETAINING (OUTER) | ||
| 14. | 7F-8671 | [1] | BALL BEARING | |
| 15. | 5N-8428 | [1] | WASHER-GEAR (10.1X34X15.5-MM THK) | |
| 16. | 5N-8427 M | [4] | BOLT-MOTOR (M10X1.5X180-MM) | |
| 17. | 6V-3959 | [5] | LOCKWASHER | |
| 18. | 5N-8403 M | [1] | SCREW-PINION (M12X1.25X70-MM) | |
| 5N-8425 | [1] | WASHER (12.2X41.5X4.5-MM THK) | ||
| 19. | 2W-6078 | [1] | PINION-DRIVE (12-TEETH) | |
| 20. | 5N-8380 | [1] | SPRING-PINION | |
| 5N-8374 | [1] | SLEEVE-SPRING | ||
| 21. | 2W-6082 | [1] | KIT-DRIVE (AIR STARTING MOTOR) | |
| (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT) | ||||
| 22. | 8B-7624 | [1] | BALL BEARING | |
| 23. | 5N-8379 | [1] | SEAT-SPRING | |
| 24. | 5N-8372 | [1] | SPRING-RETURN | |
| 25. | 5N-8384 | [1] | SHAFT-DRIVE | |
| 26. | 6V-3938 M | [1] | BOLT (M10X1.5X20-MM) | |
| 27. | 5P-9514 | [1] | BALL BEARING | |
| 28. | 5N-8377 | [1] | BEARING-DRIVE SHAFT | |
| 29. | 5N-8373 | [1] | PISTON | |
| 30. | 6V-3939 M | [1] | BOLT (M12X1.75X60-MM) | |
| 31. | 5N-8368 | [1] | PINION-ROTOR (17-TEETH) | |
| 32. | 6V-1394 | [1] | BALL BEARING | |
| 039-4317 | [2] | WASHER-SPRING | ||
| 33. | 5N-8365 | [1] | PLATE-FRONT END | |
| 34. | 5N-8364 | [1] | HOUSING-MOTOR | |
| 35. | 5N-8388 | [1] | ROTOR | |
| 36. | 5N-8367 | [1] | PLATE-REAR END | |
| AVAILABLE REPAIR KIT(S): | ||||
| 5N-8390 | [1] | KIT-SEAL & VANE (AIR STARTING MOTOR) | ||
| (INCLUDES PINS & RINGS) | ||||
| M | METRIC PART | |||
#SEBP40170436
4W-5107: STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5105@@@@@, @@@@@ 4W-5106@@@@@
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5105@@@@@, @@@@@ 4W-5106@@@@@
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-6078 | [1] | PINION-DRIVE (12-TEETH) | |
| 2. | 2W-6082 | [1] | KIT-DRIVE (AIR STARTING MOTOR) | |
| (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT) | ||||
| 3. | 3B-4505 | [8] | LOCKWASHER | |
| 4. | 5N-8363 | [1] | COVER AS | |
| 4D-3118 | [3] | PLUG-PIPE | ||
| 5. | 5N-8364 | [1] | HOUSING-MOTOR | |
| 6. | 5N-8384 | [1] | SHAFT-DRIVE | |
| 7. | 5N-8387 | [1] | CASE-GEAR | |
| 8. | 5N-8403 M | [1] | SCREW-PINION (M12X1.25X70-MM) | |
| 9. | 5N-8425 | [1] | WASHER (12.2X41.5X4.5-MM THK) | |
| 10. | 6V-3959 | [5] | LOCKWASHER | |
| 11. | 5N-8427 M | [4] | BOLT-MOTOR (M10X1.5X180-MM) | |
| 12. | 6V-3940 M | [8] | BOLT (M8X1.25X25-MM) | |
| 13. | 1L-8497 | [1] | RING-SNAP (SMALL) | |
| 14. | 2W-6081 | [1] | GEAR AS-DRIVE (37-TEETH) | |
| 15. | 3J-7719 | [1] | RING-RETAINING (INNER) | |
| 16. | 5N-8365 | [1] | PLATE-FRONT END | |
| 17. | 5N-8367 | [1] | PLATE-REAR END | |
| 18. | 5N-8368 | [1] | PINION-ROTOR (17-TEETH) | |
| 19. | 5N-8372 | [1] | SPRING-RETURN | |
| 20. | 5N-8373 | [1] | PISTON | |
| 21. | 5N-8374 | [1] | SLEEVE-SPRING | |
| 22. | 5N-8375 | [1] | CUP-SPRING | |
| 23. | 5N-8377 | [1] | BEARING-DRIVE SHAFT | |
| 24. | 5N-8378 | [1] | NUT-ROTOR CLAMP (M5X0.8-THD) | |
| 25. | 5N-8379 | [1] | SEAT-SPRING | |
| 26. | 5N-8380 | [1] | SPRING-PINION | |
| 27. | 5N-8381 | [1] | SPRING-CLUTCH | |
| 28. | 5N-8383 | [1] | CYLINDER | |
| 29. | 5N-8388 | [1] | ROTOR | |
| 30. | 5N-8424 | [1] | BULKHEAD | |
| 31. | 5N-8428 | [1] | WASHER-GEAR (10.1X34X15.5-MM THK) | |
| 32. | 5N-9574 | [1] | JAW AS-CLUTCH | |
| 33. | 5P-9514 | [1] | BALL BEARING | |
| 34. | 6J-7855 | [1] | RING-LOCK (LARGE) | |
| 35. | 6V-1394 | [1] | BALL BEARING | |
| 36. | 6V-3916 | [1] | BALL BEARING | |
| 37. | 6V-3935 | [1] | RING-RETAINING | |
| 38. | 096-4833 M | [1] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 39. | 6V-3938 M | [1] | BOLT (M10X1.5X20-MM) | |
| 40. | 6V-3939 M | [1] | BOLT (M12X1.75X60-MM) | |
| 41. | 6V-3971 | [1] | RING-RETAINING (OUTER) | |
| 42. | 7F-8671 | [1] | BALL BEARING | |
| 43. | 8B-7624 | [1] | BALL BEARING | |
| 44. | 039-4317 | [2] | WASHER-SPRING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 5N-8390 | [1] | KIT-SEAL & VANE (AIR STARTING MOTOR) | ||
| (INCLUDES PINS, RINGS, SEALS & VANE) | ||||
| M | METRIC PART | |||
#SEBP40170437
7C-3372: STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5106@@@@@, @@@@@ 4W-5105@@@@@, @@@@@ 4W-5107@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5106@@@@@, @@@@@ 4W-5105@@@@@, @@@@@ 4W-5107@@@@@
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 096-4833 M | [1] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 5N-8363 | [1] | COVER AS | |
| 2A. | 4D-3118 | [3] | PLUG-PIPE | |
| 3. | 039-4317 | [2] | WASHER-SPRING | |
| 4. | 5N-8383 | [1] | CYLINDER | |
| 5. | 6V-3916 | [1] | BALL BEARING | |
| 6. | 5N-8375 | [1] | CUP-SPRING | |
| 7. | 5N-8381 | [1] | SPRING-CLUTCH | |
| 8. | 2W-6081 | [1] | GEAR AS-DRIVE (37-TEETH) | |
| 9. | 5N-9574 | [1] | JAW AS-CLUTCH | |
| 10. | 5N-8387 | [1] | CASE-GEAR | |
| 11. | 5N-8424 | [1] | BULKHEAD | |
| 12. | 6V-3940 M | [8] | BOLT (M8X1.25X25-MM) | |
| 13. | 3J-7719 | [1] | RING-RETAINING (INNER) | |
| 14. | 7F-8671 | [1] | BALL BEARING | |
| 15. | 5N-8428 | [1] | WASHER-GEAR (10.1X34X15.5-MM THK) | |
| 16. | 5N-8427 M | [4] | BOLT-MOTOR (M10X1.5X180-MM) | |
| 17. | 7X-0796 | [5] | LOCKWASHER | |
| 18. | 5N-8403 M | [1] | SCREW-PINION (M12X1.25X70-MM) | |
| 19. | 2W-6078 | [1] | PINION-DRIVE (12-TEETH) | |
| 20. | 5N-8380 | [1] | SPRING-PINION | |
| 21. | 2W-6082 | [1] | KIT-DRIVE (AIR STARTING MOTOR) | |
| (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT) | ||||
| 22. | 8B-7624 | [1] | BALL BEARING | |
| 23. | 5N-8379 | [1] | SEAT-SPRING | |
| 24. | 5N-8372 | [1] | SPRING-RETURN | |
| 25. | 5N-8384 | [1] | SHAFT-DRIVE | |
| 26. | 6V-3938 M | [1] | BOLT (M10X1.5X20-MM) | |
| 27. | 5P-9514 | [1] | BALL BEARING | |
| 28. | 5N-8377 | [1] | BEARING-DRIVE SHAFT | |
| 29. | 5N-8373 | [1] | PISTON | |
| 30. | 6V-3939 M | [1] | BOLT (M12X1.75X60-MM) | |
| 31. | 5N-8368 | [1] | PINION-ROTOR (17-TEETH) | |
| 32. | 6V-1394 | [1] | BALL BEARING | |
| 33. | 5N-8365 | [1] | PLATE-FRONT END | |
| 34. | 111-4399 | [1] | HOUSING-MOTOR | |
| 35. | 5N-8388 | [1] | ROTOR | |
| 36. | 5N-8367 | [1] | PLATE-REAR END | |
| 37. | 5N-8378 | [1] | NUT-ROTOR CLAMP (M5X0.8-THD) | |
| 38. | 1L-8497 | [1] | RING-SNAP | |
| 39. | 6J-7855 | [1] | RING-LOCK | |
| 40. | 6V-3935 | [1] | RING-RETAINING | |
| 41. | 3B-4505 | [8] | LOCKWASHER | |
| 42. | 5N-8425 | [1] | WASHER (12.2X41.5X4.5-MM THK) | |
| 43. | 6V-3971 | [1] | RING-RETAINING (OUTER) | |
| 44. | 5N-8374 | [1] | SLEEVE-SPRING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 5N-8390 | [1] | KIT-SEAL & VANE (AIR STARTING MOTOR) | ||
| (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS) | ||||
| M | METRIC PART | |||
#SEBP40170438
207-1556: STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
S/N RXB1-UP
24-VOLT
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@207-1564@@@@@
S/N RXB1-UP
24-VOLT
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@207-1564@@@@@
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3434 | [6] | PLUG | |
| 2. | 7T-3279 | [1] | HOUSING AS | |
| 3. | 8T-8566 | [1] | TERMINAL AS | |
| 4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 6. | 3T-3422 | [1] | WIRE AS | |
| 7. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
| 8. | 7T-3277 | [1] | COIL AS-FIELD | |
| 9. | 7T-3454 | [1] | INSULATOR | |
| 10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
| (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER) | ||||
| 11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES INSULATORS & GROMMET) | ||||
| 12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
| 13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
| 14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 8H-1141 | [4] | SHOE-POLE | |
| 16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
| 18. | 3E-7775 | [1] | HOUSING AS | |
| 19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
| 20. | 7L-2894 | [1] | GASKET | |
| 21. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
| 22. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
| 25. | 376-4353 | [1] | KIT-SOLENOID (24-VOLT)(INSULATED) | |
| (INCLUDES SOLENOID AS, BOLT, NUTS, COVER & CONNECTORS) | ||||
| 26. | 6V-8378 | [3] | NUT (10-32-THD) | |
| 27. | 8F-1434 | [2] | LOCKWASHER | |
| 28. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
| 30. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES INSULATORS & BUSHING) | ||||
| 31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
| (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL) | ||||
| 32. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
| (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
| (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT) | ||||
#SEBP40170439
207-1564: STARTING MOTOR GP-ELECTRIC
207-1564 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 4N-1062 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
24-VOLT
PART OF 4N-1062 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
Parts for your C32 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3434 | [6] | PLUG | |
| 2. | 7T-3279 | [1] | HOUSING AS (STARTING MOTOR) | |
| 3. | 8T-8566 | [1] | TERMINAL AS | |
| 4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 6. | 3T-3422 | [1] | WIRE AS | |
| 7. | 7T-3278 | [1] | HOLDER AS-BRUSH (STARTING MOTOR) | |
| 8. | 7T-3277 | [1] | COIL AS-FIELD | |
| 9. | 7T-3454 | [1] | INSULATOR | |
| 10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
| 3E-7853 | [1] | TERMINAL | ||
| 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | ||
| 278-0592 | [1] | CONNECTOR | ||
| 11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES TERMINAL INSULATORS & GROMMET) | ||||
| 12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
| 13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
| 14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 8H-1141 | [4] | SHOE-POLE | |
| 16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
| 18. | 7T-3973 | [1] | HOUSING AS-LEVER | |
| 19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
| 20. | 7L-2894 | [1] | GASKET | |
| 21. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
| 22. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
| 25. | 376-4353 | [1] | KIT-SOLENOID (24-VOLT) | |
| 26. | 6V-8378 | [2] | NUT (10-32-THD) | |
| 27. | 8F-1434 | [2] | LOCKWASHER | |
| 28. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES INSULATORS & BUSHING) | ||||
| 30. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
| (INCLUDES SEAL, BRUSHES, SPRINGS, SCREWS & SCREW ASSEMBLIES) | ||||
| 31. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
| (INCLUDES NUT, GASKET, RETAINER, SEALS & LEVER ASSEMBLIES) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
| (INCLUDES BUSHINGS, WICKS, CUP, SEALS, GASKET, SCREWS, WASHERS & NUT) | ||||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Operation and Maintenance Manual
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Disassembly and Assembly
Caterpillar Parts SIS Catalog C32 :
Truck sale:
155.000
Caterpillar C32IN, Industriemaschinen, Bau-Und Bergbauausrüstung
- Industrial engines
FOLEY EQUIPMENT COMPANY
- Industrial engines
FOLEY EQUIPMENT COMPANY
300.000
Caterpillar C32, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC



