AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C18 Marine Auxiliary Generator Set CYN00001-UP BASIC ENGINE Caterpillar SIS



MARINE ENGINE C18 MARINE ENGINE CYN
 C18 Marine Auxiliary Generator Set CYN00001-UP SEBP4019 C18 CYN   (2003)

Parts group C18:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
130-9710 CAMSHAFT GP
130-9710 CAMSHAFT GP
CAMSHAFT GP
201-0566 CAMSHAFT GP
201-0566 CAMSHAFT GP
CAMSHAFT GP
243-0551 CAMSHAFT GP
243-0551 CAMSHAFT GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
DUAL CAM SENSORS
PART OF 207-0449 GEAR GP-FRONT
CLUTCH GP
CLUTCH AS
5N-3790 CLUTCH AS
5N-3790 CLUTCH AS
PART OF 5N-7330 CLUTCH GP
AN ATTACHMENT
CLUTCH GP
5N-7330 CLUTCH GP
5N-7330 CLUTCH GP
PART OF 257-7442 POWER TAKE-OFF GP
AN ATTACHMENT
COUPLING GP
MOUNTING GP-ENGINE FLEXIBLE
174-9897 MOUNTING GP-ENGINE FLEXIBLE
174-9897 MOUNTING GP-ENGINE FLEXIBLE
FOR USE WITH ENGINES WITH H CODE
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
241-3780 MOUNTING GP-ENGINE FLEXIBLE
241-3780 MOUNTING GP-ENGINE FLEXIBLE
RUBBER VIBRATION ISOLATOR MOUNTS
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
189-4917 CRANKSHAFT GP
189-4917 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
PART OF 178-8579, 198-1295, 248-0312 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
PART OF 189-4917 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
FOR USE WITH MID MOUNTED TURBO AND/OR RH OIL FILL
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
109-1223 COVER GP-CYLINDER BLOCK
109-1223 COVER GP-CYLINDER BLOCK
S/N GEN1-UP
FOR USE WITH LOW OR CENTER MOUNTED TURBOCHARGER
COVER GP-CYLINDER BLOCK
140-9746 COVER GP-CYLINDER BLOCK
140-9746 COVER GP-CYLINDER BLOCK
NO. 4 CYLINDER WATER OPENING
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
222-1975 CYLINDER BLOCK AS
222-1975 CYLINDER BLOCK AS
S/N CYN1-192
PART OF 223-9253 CYLINDER BLOCK GP
CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
S/N CYN1-UP
PART OF 222-1975, 261-0052 CYLINDER BLOCK AS
CYLINDER BLOCK AS
261-0052 CYLINDER BLOCK AS
261-0052 CYLINDER BLOCK AS
S/N CYN193-582
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
S/N CYN583-UP; GEN1-UP
PART OF 301-3018, 323-8451 CYLINDER BLOCK AS
CYLINDER BLOCK AS
301-3018 CYLINDER BLOCK AS
301-3018 CYLINDER BLOCK AS
S/N CYN583-666
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
323-8451 CYLINDER BLOCK AS
323-8451 CYLINDER BLOCK AS
S/N CYN667-UP; GEN1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
357-1320 CYLINDER BLOCK AS
357-1320 CYLINDER BLOCK AS
S/N GEN1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
488-1677 CYLINDER BLOCK AS
488-1677 CYLINDER BLOCK AS
S/N GEN1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
555-8793 CYLINDER BLOCK AS
555-8793 CYLINDER BLOCK AS
S/N GEN1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK GP
223-9253 CYLINDER BLOCK GP
223-9253 CYLINDER BLOCK GP
S/N CYN1-192
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N CYN193-582
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N CYN583-666
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N CYN667-UP; GEN1-UP
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N GEN1-UP
Type 1
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N GEN1-UP
Type 2
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N GEN1-UP
Type 3
PLUG GP-CYLINDER BLOCK
203-0342 PLUG GP-CYLINDER BLOCK
203-0342 PLUG GP-CYLINDER BLOCK
S/N CYN1-UP
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
203-9031 PLUG GP-CYLINDER BLOCK
203-9031 PLUG GP-CYLINDER BLOCK
JACKET WATER HEATER
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
207-8156 PLUG GP-CYLINDER BLOCK
207-8156 PLUG GP-CYLINDER BLOCK
FOR USE WITH @@@@@194-2450@@@@@, @@@@@207-7001@@@@@
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
234-9222 PLUG GP-CYLINDER BLOCK
234-9222 PLUG GP-CYLINDER BLOCK
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
235-2387 PLUG GP-CYLINDER BLOCK
235-2387 PLUG GP-CYLINDER BLOCK
LH
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
240-7051 PLUG GP-CYLINDER BLOCK
240-7051 PLUG GP-CYLINDER BLOCK
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
247-9999 PLUG GP-CYLINDER BLOCK
247-9999 PLUG GP-CYLINDER BLOCK
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
S/N CYN583-UP; GEN1-UP
PART OF 261-0191 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
316-1444 PLUG GP-CYLINDER BLOCK
316-1444 PLUG GP-CYLINDER BLOCK -DIPSTICK
S/N GEN1-UP
PLUG GP-ENGINE
243-0493 PLUG GP-ENGINE
243-0493 PLUG GP-ENGINE
AN ATTACHMENT
PLUG GP-ENGINE
246-0709 PLUG GP-ENGINE
246-0709 PLUG GP-ENGINE
OIL SUPPLY PORT
FOR USE WITH SINGLE TURBO ENGINES
CANNOT BE USED WITH TWIN TURBO ENGINES
AN ATTACHMENT
PLUG GP-ENGINE
262-9957 PLUG GP-ENGINE
262-9957 PLUG GP-ENGINE
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
S/N CYN1-264
PART OF 243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
S/N CYN1-264
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N CYN1-264
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 234-9216 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N CYN265-UP; GEN1-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 272-9707, 312-8590 CYLINDER HEAD GP
CYLINDER HEAD GP
234-9216 CYLINDER HEAD GP
234-9216 CYLINDER HEAD GP
S/N CYN1-264
CYLINDER HEAD GP
272-9707 CYLINDER HEAD GP
272-9707 CYLINDER HEAD GP
S/N CYN265-UP
CYLINDER HEAD GP
312-8590 CYLINDER HEAD GP
312-8590 CYLINDER HEAD GP
S/N GEN1-UP
PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
AN ATTACHMENT
PLUG GP-CYLINDER HEAD
234-9219 PLUG GP-CYLINDER HEAD
234-9219 PLUG GP-CYLINDER HEAD
FOR USE WITH 222-1982 CYLINDER HEAD
ALSO AN ATTACHMENT
PLUG GP-ENGINE
243-0493 PLUG GP-ENGINE
243-0493 PLUG GP-ENGINE
AN ATTACHMENT
PLUG GP-ENGINE
246-0709 PLUG GP-ENGINE
246-0709 PLUG GP-ENGINE
OIL SUPPLY PORT
FOR USE WITH SINGLE TURBO ENGINES
CANNOT BE USED WITH TWIN TURBO ENGINES
AN ATTACHMENT
PLUG GP-ENGINE
262-9957 PLUG GP-ENGINE
262-9957 PLUG GP-ENGINE
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
209-2786 DAMPER & PULLEY GP
209-2786 DAMPER & PULLEY GP
2 GROOVE
FOR USE WITH 16 INCH DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
209-3600 DAMPER & PULLEY GP
209-3600 DAMPER & PULLEY GP
6 GROOVES
FOR USE WITH 16 INCH DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
209-3603 DAMPER & PULLEY GP
209-3603 DAMPER & PULLEY GP
S/N CYN1-UP
1 GROOVE
FOR USE WITH NON FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
S/N CYN1-193
6-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
6-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
S/N CYN1-193
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
S/N CYN1-193
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
GUARD GP-DAMPER
209-3644 GUARD GP-DAMPER
209-3644 GUARD GP-DAMPER
FOR USE WITH 6 GROOVE PULLEY
AN ATTACHMENT
GUARD GP-DAMPER
209-3646 GUARD GP-DAMPER
209-3646 GUARD GP-DAMPER
MOLDED PLASTIC
FOR USE WITH 16 INCH OD DAMPER
AN ATTACHMENT
GUARD GP-DAMPER
254-6038 GUARD GP-DAMPER
254-6038 GUARD GP-DAMPER
FOR USE WITH SIX GROOVE PULLEY, 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
GUARD GP-DAMPER
254-6039 GUARD GP-DAMPER
254-6039 GUARD GP-DAMPER
FOR USE WITH 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
GUARD GP-DAMPER
343-9768 GUARD GP-DAMPER
343-9768 GUARD GP-DAMPER
Type 1
FOR USE WITH C18 MARINE GENSET ENGINES
CANNOT BE USED WITH @@@@@140-3694@@@@@, @@@@@241-5812@@@@@, @@@@@253-5677@@@@@, @@@@@309-5588@@@@@, @@@@@247-8489@@@@@, @@@@@247-8491@@@@@
AN ATTACHMENT
GUARD GP-DAMPER
343-9768 GUARD GP-DAMPER
343-9768 GUARD GP-DAMPER
Type 2
FOR USE WITH C18 MARINE GENSET ENGINES
CANNOT BE USED WITH @@@@@140-3694@@@@@, @@@@@241-5812@@@@@, @@@@@253-5677@@@@@, @@@@@309-5588@@@@@, @@@@@247-8489@@@@@, @@@@@247-8491@@@@@
AN ATTACHMENT
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
PART OF 6I-3638 DRIVE GP-PUMP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
SAE 2
MOUNTING GP-HYD PUMP DRIVE
242-1906 MOUNTING GP-HYD PUMP DRIVE
242-1906 MOUNTING GP-HYD PUMP DRIVE
S/N CYN1-UP
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
309-5588 MOUNTING GP-HYD PUMP DRIVE
309-5588 MOUNTING GP-HYD PUMP DRIVE
AN ATTACHMENT
FLYWHEEL GP
FASTENER GP-FLYWHEEL
319-8538 FASTENER GP-FLYWHEEL
319-8538 FASTENER GP-FLYWHEEL
S/N GEN1-UP
FOR USE WITH @@@@@319-8539@@@@@, MARINE SAE NO.0 FLYWHEEL OPTION, A TOTAL OF 12-BOLTS AND 12-WASHERS ARE REQUIRED FOR SAFE OPERATION OF THIS GROUP, THIS REQUIREMENT IS COMPLETED BY THE FLYWHEEL GROUP
FLYWHEEL GP
319-8539 FLYWHEEL GP
319-8539 FLYWHEEL GP
S/N GEN1-UP
FOR USE WITH @@@@@319-8538@@@@@, MARINE SAE NO.0 FLYWHEEL OPTION, A TOTAL OF 12-BOLTS AND 12-WASHERS ARE REQUIRED FOR SAFE OPERATION OF THIS GROUP, THIS REQUIREMENT IS COMPLETED BY THE FASTENER GROUP
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N-3060 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
9Y-7571 FLYWHEEL GP
9Y-7571 FLYWHEEL GP
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
GEAR GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
DUAL CAM SENSORS
PART OF 207-0449 GEAR GP-FRONT
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
SHOT-PEENED CLUSTER IDLER AND AN 8 BOLT CAM GEAR RETAINER
HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N CYN1-214
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
AN ATTACHMENT
HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N CYN215-UP; GEN1-UP
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
Type 1
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
Type 2
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
133-3089 COVER GP-FLYWHEEL HOUSING
133-3089 COVER GP-FLYWHEEL HOUSING
FOR USE WITH @@@@@131-3401@@@@@, @@@@@131-4850@@@@@, RH MOUNTED STARTER
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
329-9507 COVER GP-FLYWHEEL HOUSING
329-9507 COVER GP-FLYWHEEL HOUSING
S/N GEN1-UP
PROVIDES COVER GROUPS FOR FLYWHEEL TURNING TOOL PORTS AND TURBO OIL DRAIN LINE PORT
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
HOUSING GP-FLYWHEEL
167-7564 HOUSING GP-FLYWHEEL
167-7564 HOUSING GP-FLYWHEEL
FOR USE WITH SAE NO. 0 FLYWHEEL
FIELD INSTALLATION
HOUSING GP-FLYWHEEL
178-8579 HOUSING GP-FLYWHEEL
178-8579 HOUSING GP-FLYWHEEL
S/N CYN1-582
FOR USE WITH SAE NO. 0 FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
178-8579 HOUSING GP-FLYWHEEL
178-8579 HOUSING GP-FLYWHEEL
S/N CYN583-UP; GEN1-UP
FOR USE WITH SAE NO. 0 FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
S/N CYN1-399
FOR USE WITH @@@@@196-0220@@@@@
AN ATTACHMENT
HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
S/N CYN400-UP; GEN1-UP
FOR USE WITH @@@@@196-0220@@@@@
AN ATTACHMENT
HOUSING GP-FLYWHEEL
248-0312 HOUSING GP-FLYWHEEL
248-0312 HOUSING GP-FLYWHEEL
S/N CYN1-582
SAE NO. 0 FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
248-0312 HOUSING GP-FLYWHEEL
248-0312 HOUSING GP-FLYWHEEL
S/N CYN583-UP; GEN1-UP
SAE NO. 0 FLYWHEEL
ALSO AN ATTACHMENT
PLUG GP-FLYWHEEL HOUSING
329-9616 PLUG GP-FLYWHEEL HOUSING
329-9616 PLUG GP-FLYWHEEL HOUSING
S/N GEN1-UP
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
120-9847 COVER GP-FRONT HOUSING
120-9847 COVER GP-FRONT HOUSING -OIL FILLER
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
CAM AND IDLER GEAR ACCESS
ALSO AN ATTACHMENT
FASTENER GP-FRONT COVER
254-6021 FASTENER GP-FRONT COVER
254-6021 FASTENER GP-FRONT COVER
FOR USE WITH @@@@@206-1211@@@@@
AN ATTACHMENT
FASTENER GP-FRONT COVER
339-6214 FASTENER GP-FRONT COVER
339-6214 FASTENER GP-FRONT COVER
CANNOT BE USED WITH @@@@@309-5588@@@@@
AN ATTACHMENT
FASTENER GP-FRONT HOUSING
201-8358 FASTENER GP-FRONT HOUSING
201-8358 FASTENER GP-FRONT HOUSING
AN ATTACHMENT
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
SHOT-PEENED CLUSTER IDLER AND AN 8 BOLT CAM GEAR RETAINER
HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N CYN1-214
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
AN ATTACHMENT
HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N CYN215-UP; GEN1-UP
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
ALSO AN ATTACHMENT
PLATE AS-FRONT HOUSING
353-9979 PLATE AS-FRONT HOUSING
353-9979 PLATE AS-FRONT HOUSING
S/N CYN215-UP; GEN1-UP
PART OF 206-1211 HOUSING GP-FRONT
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
124-6328 LIFTING GP-ENGINE
124-6328 LIFTING GP-ENGINE
REAR
AN ATTACHMENT
LIFTING GP-ENGINE
127-0564 LIFTING GP-ENGINE
127-0564 LIFTING GP-ENGINE
FRONT
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
210-0115 LIFTING GP-ENGINE
210-0115 LIFTING GP-ENGINE
FOR USE WITH RH SERVICE ENGINE
AN ATTACHMENT
LIFTING GP-ENGINE
310-5806 LIFTING GP-ENGINE
310-5806 LIFTING GP-ENGINE -REAR
S/N GEN1-UP
LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
PROVIDES FRONT AND REAR LIFTING EYES
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
131-8293 MOUNTING GP-ALTERNATOR
131-8293 MOUNTING GP-ALTERNATOR
FOR USE WITH HEAVY DUTY ALTERNATOR WHEN USED WITH FRONT PTO OR FRONT STUB SHAFT
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
209-3641 MOUNTING GP-ALTERNATOR
209-3641 MOUNTING GP-ALTERNATOR
FOR USE WITH RH MOUNTED LIGHT DUTY ALTERNATOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
209-3642 MOUNTING GP-ALTERNATOR
209-3642 MOUNTING GP-ALTERNATOR
FOR USE WITH RH MOUNTED HEAVY DUTY ALTERNATOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
241-5812 MOUNTING GP-ALTERNATOR
241-5812 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@140-3694@@@@@, HEAVY DUTY FRONT SUPPORT
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
241-5813 MOUNTING GP-ALTERNATOR
241-5813 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@140-3694@@@@@, HEAVY DUTY FRONT SUPPORT
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
253-5677 MOUNTING GP-ALTERNATOR
253-5677 MOUNTING GP-ALTERNATOR
S/N CYN1-UP
FOR USE WITH MARINE ENGINES
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
254-3854 MOUNTING GP-ALTERNATOR
254-3854 MOUNTING GP-ALTERNATOR
S/N CYN1-UP
MOUNTS OFF OF THE FRONT HOUSING INSTEAD OF THE FRONT SUPPORT
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE FLEXIBLE
174-9897 MOUNTING GP-ENGINE FLEXIBLE
174-9897 MOUNTING GP-ENGINE FLEXIBLE
FOR USE WITH ENGINES WITH H CODE
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
241-3780 MOUNTING GP-ENGINE FLEXIBLE
241-3780 MOUNTING GP-ENGINE FLEXIBLE
RUBBER VIBRATION ISOLATOR MOUNTS
AN ATTACHMENT
SUPPORT GP-ENGINE
124-3388 SUPPORT GP-ENGINE
124-3388 SUPPORT GP-ENGINE
FRONT
AN ATTACHMENT
SUPPORT GP-ENGINE
140-3694 SUPPORT GP-ENGINE
140-3694 SUPPORT GP-ENGINE
FOR USE WITH FRONT STUB SHAFT
AN ATTACHMENT
SUPPORT GP-ENGINE
338-5750 SUPPORT GP-ENGINE
338-5750 SUPPORT GP-ENGINE -FRONT
FOR USE WITH @@@@@254-6039@@@@@, @@@@@254-6038@@@@@
AN ATTACHMENT
SUPPORT GP-ENGINE
6I-3950 SUPPORT GP-ENGINE
6I-3950 SUPPORT GP-ENGINE -FRONT
S/N GEN1-UP
SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE -FRONT
AN ATTACHMENT
PAN GP-OIL
FITTING GP-OIL PAN
140-6330 FITTING GP-OIL PAN
140-6330 FITTING GP-OIL PAN -ENGINE
PROVIDES PLUG FOR LH REAR OPENING IN OIL PAN
FOR USE WITH RH SUMP PUMP
ALSO AN ATTACHMENT
FITTING GP-OIL PAN
140-6331 FITTING GP-OIL PAN
140-6331 FITTING GP-OIL PAN -ENGINE
PROVIDES PLUG FOR RH REAR OPENING IN OIL PAN
FOR USE WITH LH SUMP PUMP
ALSO AN ATTACHMENT
FITTING GP-OIL PAN
284-1486 FITTING GP-OIL PAN
284-1486 FITTING GP-OIL PAN -ENGINE
FOR USE WITH SUMP PUMP AND DUPLEX OIL FILTERS
AN ATTACHMENT
PAN GP-OIL
126-9140 PAN GP-OIL
126-9140 PAN GP-OIL -ENGINE
SHALLOW, NO SOUND SUPPRESSION
AN ATTACHMENT
PAN GP-OIL
228-0880 PAN GP-OIL
228-0880 PAN GP-OIL -ENGINE
AN ATTACHMENT
PAN GP-OIL
228-1644 PAN GP-OIL
228-1644 PAN GP-OIL -SHALLOW SUMP
S/N CYN1-650
AN ATTACHMENT
PAN GP-OIL
228-1644 PAN GP-OIL
228-1644 PAN GP-OIL -SHALLOW SUMP
S/N CYN651-UP; GEN1-UP
ALSO AN ATTACHMENT
PAN GP-OIL
302-5449 PAN GP-OIL
302-5449 PAN GP-OIL -ENGINE
DEEP PAN, SHALLOW SUMP
AN ATTACHMENT
PAN GP-OIL
322-8954 PAN GP-OIL
322-8954 PAN GP-OIL -ENGINE
DEEP SUMP
ALSO AN ATTACHMENT
PARTS GP-MISCELLANEOUS
FASTENER GP-ENGINE
209-8304 FASTENER GP-ENGINE
209-8304 FASTENER GP-ENGINE
FOR USE WITH LH SERVICE ENGINE
AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
235-6393 PISTON & ROD GP
235-6393 PISTON & ROD GP
S/N CYN1-179
14.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6393 PISTON & ROD GP
235-6393 PISTON & ROD GP
S/N CYN180-197
14.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6393 PISTON & ROD GP
235-6393 PISTON & ROD GP
S/N CYN198-259
14.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6393 PISTON & ROD GP
235-6393 PISTON & ROD GP
S/N CYN260-788
14.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN1-162
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN163-179
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN168-179
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN180-197
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN198-259
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
235-6394 PISTON & ROD GP
235-6394 PISTON & ROD GP
S/N CYN260-788
16.5:1 COMPRESSION RATIO
PISTON & ROD GP
283-7669 PISTON & ROD GP
283-7669 PISTON & ROD GP
S/N CYN789-UP; GEN1-UP
14.5:1 COMPRESSION RATIO
PISTON & ROD GP
308-4486 PISTON & ROD GP
308-4486 PISTON & ROD GP
S/N CYN789-UP; GEN1-UP
18L/16.5:1 COMPRESSION RATIO
POWER TAKE-OFF GP
POWER TAKE-OFF GP
257-7442 POWER TAKE-OFF GP
257-7442 POWER TAKE-OFF GP
FOR USE WITH 16-INCH DAMPER
AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
209-2786 DAMPER & PULLEY GP
209-2786 DAMPER & PULLEY GP
2 GROOVE
FOR USE WITH 16 INCH DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
209-3600 DAMPER & PULLEY GP
209-3600 DAMPER & PULLEY GP
6 GROOVES
FOR USE WITH 16 INCH DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
209-3603 DAMPER & PULLEY GP
209-3603 DAMPER & PULLEY GP
S/N CYN1-UP
1 GROOVE
FOR USE WITH NON FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
S/N CYN1-193
6-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
247-8489 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
6-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
S/N CYN1-193
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
247-8490 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
S/N CYN1-193
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
247-8491 DAMPER & PULLEY GP
S/N CYN194-UP; GEN1-UP
1-GROOVE
FOR USE WITH C18 AUXILIARY ENGINES WITH FINNED DAMPER
AN ATTACHMENT
SERPENTINE/V-BELTS
MOUNTING GP-BRACKET
243-6426 MOUNTING GP-BRACKET
243-6426 MOUNTING GP-BRACKET
FOR USE WITH @@@@@245-5849@@@@@, @@@@@243-3842@@@@@
AN ATTACHMENT
MOUNTING GP-BRACKET
243-6427 MOUNTING GP-BRACKET
243-6427 MOUNTING GP-BRACKET
FOR USE WITH @@@@@245-5849@@@@@, @@@@@243-3842@@@@@, @@@@@178-8579@@@@@
AN ATTACHMENT
V-BELT GP
5F-3581 V-BELT GP
5F-3581 V-BELT GP -FAN DRIVE
AN ATTACHMENT
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N CYN1-605
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N CYN606-UP; GEN1-UP
COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
PART OF 187-3316 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
PART OF 187-3316, 487-1721 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
187-3316 COVER GP-VALVE MECHANISM
187-3316 COVER GP-VALVE MECHANISM
PROVIDES FRONT MOUNTED BREATHER
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
250-9986 COVER GP-VALVE MECHANISM
250-9986 COVER GP-VALVE MECHANISM
PART OF 250-9990 COVER GP-VALVE MECHANISM
FOR USE WITH DUAL ECM
AN ATTACHMENT
COVER GP-VALVE MECHANISM
250-9990 COVER GP-VALVE MECHANISM
250-9990 COVER GP-VALVE MECHANISM
NO OIL FILL
FOR USE WITH DUAL ECM
AN ATTACHMENT
COVER GP-VALVE MECHANISM
261-7166 COVER GP-VALVE MECHANISM
261-7166 COVER GP-VALVE MECHANISM
PART OF 250-9990 COVER GP-VALVE MECHANISM
AN ATTACHMENT
COVER GP-VALVE MECHANISM
487-1721 COVER GP-VALVE MECHANISM
487-1721 COVER GP-VALVE MECHANISM
PART OF 250-9990 COVER GP-VALVE MECHANISM
AN ATTACHMENT
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N CYN1-399
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N CYN400-UP; GEN1-UP
Type 1
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N CYN400-UP; GEN1-UP
Type 2
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N GEN1-UP
ROCKER ARM GP
210-2521 ROCKER ARM GP
210-2521 ROCKER ARM GP
S/N CYN1-399
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N CYN400-UP; GEN1-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N CYN400-UP; GEN1-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP -NON-BRAKE
S/N CYN400-UP; GEN1-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
S/N CYN400-UP; GEN1-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N GEN1-UP
PART OF 437-3865 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N GEN1-UP
PART OF 437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N GEN1-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
PLATE GP-ENGINE IDENTIFICATION
321-8343 PLATE GP-ENGINE IDENTIFICATION
321-8343 PLATE GP-ENGINE IDENTIFICATION
AN ATTACHMENT
ENGINE OVERHAUL KIT
455-1187 KIT-ENGINE OVERHAUL
455-1187 KIT-ENGINE OVERHAUL -MAJOR REPAIR
*****DUE TO MULTIPLE ENGINE CONFIGURATIONS FOR THESE ARRANGEMENTS:241-9639, 241-9621, 241-9620, & 241-9632. PLEASE CONTACT YOUR DEALER WITH YOUR COMPLETE ENGINE SERIAL NUMBER TO ENSURE THE CORRECT KIT IS SELECTED. SERIAL NUMBER RANGES HAVE BEEN POSTED AT THE BOTTOM OF THE ENGINE ARRANGEMENT PARTS PAGE UNDER KITS.***
FOR USE WITH @@@@@242-0372@@@@@, @@@@@242-0376@@@@@, @@@@@242-0382@@@@@, REHS9295, MARINE ENGINE, PQ0230, PQ0232, PQ0242, PQ0236, PQ0269 & PQ0285, PQ0273 & PQ0289, PQ0279 & PQ0295, GZ0220
ALSO FIELD INSTALLATION
455-1194 KIT-ENGINE OVERHAUL
455-1194 KIT-ENGINE OVERHAUL -TOP END
*****DUE TO MULTIPLE ENGINE CONFIGURATIONS FOR THESE ARRANGEMENTS:241-9639, 241-9621, 241-9620, & 241-9632. PLEASE CONTACT YOUR DEALER WITH YOUR COMPLETE ENGINE SERIAL NUMBER TO ENSURE THE CORRECT KIT IS SELECTED. SERIAL NUMBER RANGES HAVE BEEN POSTED AT THE BOTTOM OF THE ENGINE ARRANGEMENT PARTS PAGE UNDER KITS.***
FOR USE WITH @@@@@242-0372@@@@@, @@@@@242-0376@@@@@, @@@@@242-0382@@@@@, REHS9286, MARINE ENGINE, PQ0230, PQ0232, PQ0242, PQ0236, PQ0269 & PQ0285, PQ0273 & PQ0289, PQ0279 & PQ0295, GZ0220
ALSO FIELD INSTALLATION
455-7246 KIT-ENGINE OVERHAUL
455-7246 KIT-ENGINE OVERHAUL -MAJOR REPAIR
FOR USE WITH @@@@@242-0385@@@@@, REHS9292, MARINE ENGINE, PA7765, PQ0166, PQ0330, PQ0282 & PQ0298, GZ0215 & GZ0231
ALSO FIELD INSTALLATION
455-7249 KIT-ENGINE OVERHAUL
455-7249 KIT-ENGINE OVERHAUL -TOP END
FOR USE WITH @@@@@242-0385@@@@@, REHS9283, MARINE ENGINE, PQ0166, PA7765, PQ0330, PQ0282 & PQ0298, GZ0215 & GZ0231
ALSO FIELD INSTALLATION

Information:

(For parts list, see above)

Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Specifications
Belt Tension Chart
C18 Marine and Marine Generator Set Engines
Engine News
Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
2013/10/24
Specifications
Camshaft
C18 Marine and Marine Generator Set Engines
Camshaft
C18 Marine and Marine Generator Set Engines
Camshaft
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Remove
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Install
C18 Generator set and C18 Marine Engines
Camshaft - Remove
C18 Generator set and C18 Marine Engines
Camshaft - Install
C18 Generator set and C18 Marine Engines
Engine News
A New Type of Main Bearing is Now Used {1203}
2004/05/01
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2006/05/01
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Specifications
Main Bearing Journal
C18 Marine and Marine Generator Set Engines
Crankshaft
C18 Marine and Marine Generator Set Engines
Connecting Rod Bearing Journal
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Main Bearings - Inspect
C18 Marine and Marine Generator Set Engines
Excessive Bearing Wear - Inspect
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C18 Generator set and C18 Marine Engines
Crankshaft Main Bearings - Install
C18 Generator set and C18 Marine Engines
Crankshaft - Remove
C18 Generator set and C18 Marine Engines
Crankshaft Main Bearings - Remove
C18 Generator set and C18 Marine Engines
Crankshaft - Install
C18 Generator set and C18 Marine Engines
Crankshaft Front Seal - Remove
C18 Generator set and C18 Marine Engines
Crankshaft Front Seal - Install
C18 Generator set and C18 Marine Engines
Crankshaft Rear Seal - Remove
C18 Generator set and C18 Marine Engines
Crankshaft Rear Seal - Install
C18 Generator set and C18 Marine Engines
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
Precautions for Cylinder Liner Installation {1201, 1216}
2007/08/27
New Cylinder Liners and O-ring Seals are Used {1201, 1216}
2008/08/25
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
2010/01/27
New Cylinder Pack Assemblies Are Available in Sets for Certain C18 Engines {1201, 1216, 1225, 1239}
2015/09/17
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216}
A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Procedure for Piston and Piston Pin Break-In for Certain C18 Marine Engines{1214, 1225}
Procedure for Piston and Piston Pin Break-In for Certain C18 Marine Engines{1214, 1225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Main Bearing Journal
C18 Marine and Marine Generator Set Engines
Cylinder Liner
C18 Marine and Marine Generator Set Engines
Cylinder Block
C18 Marine and Marine Generator Set Engines
Cylinder Block
C18 Marine and Marine Generator Set Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Testing and Adjusting
Main Bearings - Inspect
C18 Marine and Marine Generator Set Engines
Cylinder Block - Inspect
C18 Marine and Marine Generator Set Engines
Excessive Bearing Wear - Inspect
C18 Marine and Marine Generator Set Engines
Cylinder Liner Projection - Inspect
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C18 Generator set and C18 Marine Engines
Piston Cooling Jets - Remove and Install
C18 Generator set and C18 Marine Engines
Crankshaft Main Bearings - Install
C18 Generator set and C18 Marine Engines
Crankshaft Main Bearings - Remove
C18 Generator set and C18 Marine Engines
Cylinder Liner - Install
C18 Generator set and C18 Marine Engines
Cylinder Liner - Remove
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Remove
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Install
C18 Generator set and C18 Marine Engines
Service Magazine
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
Engine News
New Inlet Valve Seats are Now Used {1103}
2005/10/03
A New Outer Valve Spring is Now Used {1100, 1108}
2008/12/08
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
C18 Marine Auxiliary Engine
Engine Valve Rotators - Inspect
C18 Marine Auxiliary Engine
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head Valves
C18 Marine and Marine Generator Set Engines
Cylinder Head
C18 Marine and Marine Generator Set Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
C18 Generator set and C18 Marine Engines
Electronic Unit Injector Sleeve - Remove
C18 Generator set and C18 Marine Engines
Cylinder Head - Remove
C18 Generator set and C18 Marine Engines
Cylinder Head - Install
C18 Generator set and C18 Marine Engines
Rocker Arm and Shaft - Remove
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Remove
C18 Generator set and C18 Marine Engines
Camshaft Bearings - Install
C18 Generator set and C18 Marine Engines
Rocker Arm and Shaft - Install
C18 Generator set and C18 Marine Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C18 Generator set and C18 Marine Engines
Inlet and Exhaust Valve Guides - Remove and Install
C18 Generator set and C18 Marine Engines
Inlet and Exhaust Valve Springs - Remove and Install
C18 Generator set and C18 Marine Engines
Inlet and Exhaust Valves - Remove and Install
C18 Generator set and C18 Marine Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C18 Marine Auxiliary Engine
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Specifications
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Testing and Adjusting
Vibration Damper - Check
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C18 Generator set and C18 Marine Engines
Vibration Damper and Pulley - Remove and Install
C18 Generator set and C18 Marine Engines
Vibration Damper Guard - Remove and Install
C18 Generator set and C18 Marine Engines
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C18 Marine and Marine Generator Set Engines
Flywheel
C18 Marine and Marine Generator Set Engines
Flywheel Housing
C18 Marine and Marine Generator Set Engines
Flywheel
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Flywheel - Remove
C18 Generator set and C18 Marine Engines
Flywheel - Install
C18 Generator set and C18 Marine Engines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Specifications
Gear Group (Front)
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Gear Group (Front) - Remove
C18 Generator set and C18 Marine Engines
Gear Group (Front) - Install
C18 Generator set and C18 Marine Engines
Vibration Damper Guard - Remove and Install
C18 Generator set and C18 Marine Engines
Specifications
Flywheel Housing
C18 Marine and Marine Generator Set Engines
Flywheel Housing
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C18 Generator set and C18 Marine Engines
Flywheel Housing - Remove and Install
C18 Generator set and C18 Marine Engines
Technical Information Bulletin
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
Specifications
Front Housing and Covers
C18 Marine and Marine Generator Set Engines
Housing (Front)
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C18 Generator set and C18 Marine Engines
Housing (Front) - Install
C18 Generator set and C18 Marine Engines
Front Cover - Remove
C18 Generator set and C18 Marine Engines
Front Cover - Install
C18 Generator set and C18 Marine Engines
Operation and Maintenance Manual
Overhaul (Major)
C18 Marine Auxiliary Engine
Overhaul (Top End)
C18 Marine Auxiliary Engine
Engine News
A New Torque is Used for the Alternator Mounting Groups on Certain C18 Marine Engines {1154, 1405, 1405}
2012/03/05
Operation and Maintenance Manual
Engine Mounts - Inspect
C18 Marine Auxiliary Engine
Disassembly and Assembly
Engine Support (Front) - Remove and Install
C18 Generator set and C18 Marine Engines
Engine News
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/01/07
A New Oil Pan Gasket Is Used for Certain C18 Marine Engines, and Available for Certain 3406E and C15 and C18 Marine Engines {1302, 7555}
2010/01/08
Specifications
Engine Oil Pan
C18 Marine and Marine Generator Set Engines
Engine Oil Pan
C18 Marine and Marine Generator Set Engines
Engine Oil Pan
C18 Marine and Marine Generator Set Engines
Engine Oil Pan
C18 Marine and Marine Generator Set Engines
Engine Oil Pan
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C18 Generator set and C18 Marine Engines
Engine News
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Cylinder Pack Assemblies Are Available in Sets for Certain C18 Engines {1201, 1216, 1225, 1239}
2015/09/17
New Pistons Are Used on Certain C18 Marine Engines {1225}
2013/02/22
A Procedure for Piston and Piston Pin Break-In for Certain C18 Engines is Now Available {1225}
2015/09/23
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Procedure for Piston and Piston Pin Break-In for Certain C18 Marine Engines{1214, 1225}
Procedure for Piston and Piston Pin Break-In for Certain C18 Marine Engines{1214, 1225}
Technical Information Bulletin
Piston Seizures on C18 Engines{1225, 1331}
Piston Seizures on C18 Engines{1225, 1331}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C18 Marine and Marine Generator Set Engines
Piston and Rings
C18 Marine and Marine Generator Set Engines
Connecting Rod
C18 Marine and Marine Generator Set Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C18 Marine and Marine Generator Set Engines
Excessive Bearing Wear - Inspect
C18 Marine and Marine Generator Set Engines
Cylinder Liner Projection - Inspect
C18 Marine and Marine Generator Set Engines
Compression - Test
C18 Marine and Marine Generator Set Engines
Piston Ring Groove - Inspect
C18 Marine and Marine Generator Set Engines
Connecting Rod Bearings - Inspect
C18 Marine and Marine Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C18 Generator set and C18 Marine Engines
Piston Cooling Jets - Remove and Install
C18 Generator set and C18 Marine Engines
Connecting Rod Bearings - Install
C18 Generator set and C18 Marine Engines
Pistons and Connecting Rods - Assemble
C18 Generator set and C18 Marine Engines
Pistons and Connecting Rods - Disassemble
C18 Generator set and C18 Marine Engines
Connecting Rod Bearings - Remove
C18 Generator set and C18 Marine Engines
Pistons and Connecting Rods - Remove
C18 Generator set and C18 Marine Engines
Pistons and Connecting Rods - Install
C18 Generator set and C18 Marine Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C18 Marine Auxiliary Engine
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Specifications
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Vibration Damper and Pulley
C18 Marine and Marine Generator Set Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C18 Generator set and C18 Marine Engines
Vibration Damper and Pulley - Remove and Install
C18 Generator set and C18 Marine Engines
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
C18 Marine Auxiliary Engine
Specifications
Belt Tension Chart
C18 Marine and Marine Generator Set Engines
Engine News
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/08/23
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly Is Available {1123}
2009/02/09
A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/12
A New Valve Bridge Is Available for Certain Commercial Engines {1121}
2011/01/06
A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
2011/01/10
Valve Cover Isolation Seals Are Now Used on Certain Engines {1107, 7555}
2011/11/08
An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
2014/07/25
A New Valve Cover Base Is Used on Certain C15 and C18 Commercial Engines {1120}
2014/11/26
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, C18, C27, and C32 Engines {1123}
2015/03/25
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
C18 Marine Auxiliary Engine
Engine Valve Rotators - Inspect
C18 Marine Auxiliary Engine
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Electronic Unit Injector Rocker Arm
C18 Marine and Marine Generator Set Engines
Valve Mechanism
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C18 Marine and Marine Generator Set Engines
Engine Valve Lash - Inspect/Adjust
C18 Marine and Marine Generator Set Engines
Troubleshooting
Excessive Valve Lash
C18 Marine Auxiliary Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C18 Generator set and C18 Marine Engines
Rocker Arm - Assemble
C18 Generator set and C18 Marine Engines
Rocker Arm - Disassemble
C18 Generator set and C18 Marine Engines
Rocker Arm and Shaft - Remove
C18 Generator set and C18 Marine Engines
Rocker Arm and Shaft - Install
C18 Generator set and C18 Marine Engines
Valve Mechanism Cover Base - Remove and Install
C18 Generator set and C18 Marine Engines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Engine News
A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/09
Engine Overhaul Foundational Kits Are Available for C18 Marine Engines {1000}
2014/12/12
Special Instruction
455-1194 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
455-1194 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
455-7249 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
455-7249 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
455-7246 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
455-7246 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
455-1187 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
455-1187 Major Overhaul Foundational Kit for C18 Marine Engines{1000}

Truck sale:

Caterpillar C18, Construction
89,000 USD 
Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C18, Construction
34,700 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
34,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
32,850 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
36,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.