ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
BARRING GPVALVE MECHANISM GP
CAMSHAFT GP
COUPLING GP
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
ENGINE ARRANGEMENT
ENGINE AR#SEBP40260001
262-1032: ENGINE AR
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 107-7196 Y | [1] | AFTERCOOLER GP-TREATED WATER | ||
| 247-4695 Y | [1] | BREATHER GP (CRANKCASE) | ||
| S/N NSC1-3 | ||||
| 282-9930 Y | [1] | BREATHER GP (CRANKCASE) | ||
| S/N NSC4-UP | ||||
| 106-4586 Y | [1] | CAMSHAFT GP | ||
| 8N-8993 Y | [1] | CONNECTION GP-WATER (INLET, LH) | ||
| S/N NSC1-6 | ||||
| 220-2677 Y | [1] | CONTROL & MTG GP-ENGINE ELEK (PRIMARY) | ||
| 231-7069 Y | [1] | CONTROL & MTG GP-ENGINE ELEK (SECONDARY) | ||
| 4W-5892 Y | [1] | COOLER GP-ENGINE OIL | ||
| 281-2696 Y | [1] | COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE) | ||
| 4W-1529 Y | [1] | COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE) | ||
| 107-0278 Y | [1] | COVER GP-FRONT HOUSING | ||
| 101-0831 Y | [9] | COVER GP-VALVE MECHANISM | ||
| 8N-7103 Y | [1] | CRANKSHAFT GP | ||
| 240-6651 Y | [1] | CYLINDER BLOCK GP | ||
| 101-0830 Y | [12] | CYLINDER HEAD GP | ||
| 8N-0339 Y | [1] | DAMPER GP | ||
| 7E-7647 Y | [1] | DRIVE GP-ACCESSORY (LOWER, LH) | ||
| 271-3153 Y | [1] | FILLER GP-ENGINE OIL | ||
| 7N-4851 Y | [1] | FLYWHEEL GP | ||
| 7C-9784 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP) | ||
| 8N-7174 Y | [1] | GEAR GP-FRONT (STANDARD ROTATION)(STANDARD ROTATION) | ||
| 124-8395 Y | [1] | GEAR GP-REAR (CAMSHAFT DRIVE) | ||
| 101-1269 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 4P-5426 Y | [1] | HOUSING GP-FRONT (ACCESSORY DRIVE)(ACCESSORY DRIVE) | ||
| 7E-6872 Y | [1] | LIFTING GP-ENGINE | ||
| 242-6277 Y | [1] | LINES GP-ENGINE OIL | ||
| 250-9261 Y | [1] | LINES GP-FUEL | ||
| S/N NSC1-6 | ||||
| 309-5092 Y | [1] | LINES GP-FUEL (FUEL COOLER) | ||
| S/N NSC7-UP | ||||
| 234-8723 Y | [1] | LINES GP-FUEL INJECTION | ||
| 173-2947 Y | [1] | LINES GP-TURBOCHARGER AIR | ||
| 162-5719 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 241-4303 Y | [1] | LINES GP-WATER (AFTERCOOLER) | ||
| 241-4306 Y | [1] | LINES GP-WATER (AFTERCOOLER) | ||
| 114-3376 Y | [1] | LINES GP-WATER (LOWER) | ||
| 161-4087 Y | [1] | LINES GP-TURBOCHARGER WATER | ||
| 140-2666 Y | [1] | LINES GP-WATER (UPPER) | ||
| 161-2502 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 223-6363 Y | [12] | PISTON & ROD GP | ||
| S/N NSC1-3 | ||||
| 281-6139 Y | [12] | PISTON & ROD GP | ||
| S/N NSC4-UP | ||||
| 8N-6152 Y | [1] | PUMP GP-ENGINE OIL (2-SECTION GEAR) | ||
| 256-3663 Y | [12] | PUMP GP-FUEL INJECTION | ||
| 265-7992 Y | [1] | PUMP GP-FUEL PRIMING (RH) | ||
| 8N-6151 Y | [1] | PUMP GP-FUEL TRANSFER (1-SECTION GEAR) | ||
| 9Y-8175 Y | [1] | PUMP GP-AUXILIARY WATER (AFTERCOOLER) | ||
| 2W-9729 Y | [1] | PUMP GP-WATER | ||
| 8N-7643 Y | [1] | HOUSING & REGULATOR GP (INLET CONTROL) | ||
| S/N NSC1-6 | ||||
| 7W-3813 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 263-9597 Y | [12] | SENSOR GP-TEMPERATURE (EXHAUST) | ||
| 200-2000 Y | [1] | SHIELD GP-EXHAUST (MANIFOLD) | ||
| 200-1999 Y | [1] | SHIELD GP-EXHAUST (TURBOCHARGER) | ||
| 250-0838 Y | [1] | TANK GP-EXPANSION | ||
| 159-8828 Y | [1] | TURBOCHARGER GP | ||
| 224-9869 Y | [12] | VALVE MECHANISM GP | ||
| 235-6316 | [1] | ELECTRONICS GP-ENGINE RATINGS | ||
| S/N NSC1-3 | ||||
| 278-8317 | [1] | ELECTRONICS GP-ENGINE RATINGS | ||
| S/N NSC4-UP | ||||
| PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40260002
262-1014: GENERAL AR
262-1014 GENERAL AR
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 268-4718 Y | [2] | ADAPTER GP-AIR CLEANER | ||
| 4P-0558 Y | [2] | AIR CLEANER GP | ||
| 5R-7425 Y | [1] | BARRING GP | ||
| 256-0610 Y | [1] | BASE AS | ||
| 7L-7872 Y | [1] | BATTERY GP (24-VOLT) | ||
| 274-6147 Y | [1] | BOX GP-INSTRUMENT PANEL | ||
| 280-2619 Y | [1] | BOX GP-JUNCTION | ||
| S/N NSC13-UP | ||||
| 231-9999 Y | [1] | BOX GP-JUNCTION | ||
| 284-5428 Y | [1] | CONTACTOR GP | ||
| S/N NSC1-9 | ||||
| 328-1442 Y | [1] | CONTACTOR GP | ||
| S/N NSC10-UP | ||||
| 277-8962 Y | [1] | CONTROL GP-MONITOR | ||
| S/N NSC13-UP | ||||
| 263-3894 Y | [1] | COUPLING GP-GENERATOR | ||
| 340-1487 Y | [2] | COVER GP-SHIPPING | ||
| 262-1032 Y | [1] | ENGINE AR | ||
| 120-4501 Y | [1] | FILTER GP-ENGINE OIL (DUPLEX) | ||
| 7W-9743 Y | [1] | FILTER GP-FUEL (DUPLEX) | ||
| 498-2847 Y | [1] | FILTER GP-FUMES DISPOSAL | ||
| S/N NSC25-UP | ||||
| 120-6704 Y | [1] | FILTER GP-WATER SEP & FUEL | ||
| 262-7329 Y | [1] | FUMES DISPOSAL GP | ||
| S/N NSC1-12 | ||||
| 8N-9639 Y | [1] | GUARD GP-DAMPER | ||
| 275-7814 Y | [1] | GUARD GP-ENGINE | ||
| 7E-6248 Y | [2] | HEATER GP-JACKET WATER | ||
| 266-0214 Y | [1] | HOSE GP-ENGINE | ||
| 262-6893 Y | [1] | LINES GP-AIR STARTING | ||
| 263-9580 Y | [1] | LINES GP-AUXILIARY SEA WATER | ||
| 263-9576 Y | [1] | LINES GP-FUEL | ||
| 286-5754 Y | [1] | MOUNTING GP-AIR CLEANER | ||
| 263-9590 Y | [1] | MOUNTING GP-BATTERY | ||
| 275-7713 Y | [1] | MOUNTING GP-BATTERY CHARGER | ||
| S/N NSC1-12 | ||||
| 263-9573 Y | [1] | MOUNTING GP-BELLOWS (EXHAUST) | ||
| 268-3189 Y | [2] | MOUNTING GP-BELLOWS (INTERFACE) | ||
| 286-5753 Y | [1] | MOUNTING GP-BOX (POWER DISTRIBUTION) | ||
| 357-0895 Y | [1] | MOUNTING GP-CONTROL PANEL (PRELUBRICATION) | ||
| S/N NSC13-UP | ||||
| 275-7714 Y | [1] | MOUNTING GP-ENGINE | ||
| 263-9591 Y | [1] | MOUNTING GP-ENGINE & GENERATOR | ||
| 263-9589 Y | [1] | MOUNTING GP-FUEL FILTER | ||
| 365-4539 Y | [1] | MOUNTING GP-INSTRUMENT PANEL | ||
| S/N NSC13-UP | ||||
| 262-0848 Y | [1] | MOUNTING GP-JACKET WTR HEATER | ||
| 168-3627 Y | [8] | MOUNTING GP-VIBRATION ISOLATOR | ||
| 260-0024 Y | [1] | PANEL AR-CONTROL (PRELUBRICATION) | ||
| S/N NSC13-UP | ||||
| 271-4474 Y | [1] | PANEL GP-ELECTRONIC (EMCP 3.3) | ||
| 259-9999 Y | [1] | PANEL GP-ELECTRONIC (RELAY) | ||
| S/N NSC13-UP | ||||
| 283-5244 Y | [1] | PUMP GP-AUXILIARY SEA WATER | ||
| 262-7294 Y | [1] | PUMP GP-PRELUBRICATION | ||
| 263-9597 Y | [2] | SENSOR GP-TEMPERATURE (EXHAUST) | ||
| S/N NSC1-12 | ||||
| 244-0474 Y | [1] | SHIELD GP-ENGINE OIL LINES | ||
| 246-0456 Y | [1] | SHIELD GP-PROTECTION | ||
| 268-3764 Y | [1] | SHIELD GP-FUEL LINES | ||
| 274-5749 Y | [1] | SHUTOFF GP-AIR | ||
| 112-6597 Y | [1] | SILENCER GP-AIR STARTING | ||
| 262-9826 Y | [1] | STARTING MOTOR GP-AIR | ||
| 7N-4885 Y | [1] | SWITCH GP-COOLANT LEVEL | ||
| 8N-8510 Y | [1] | VALVE GP-EXPLOSION RELIEF (CRANKCASE) | ||
| 232-0889 Y | [1] | WIRING GP-AIR SHUTOFF | ||
| 277-8960 Y | [1] | WIRING GP-ENGINE | ||
| S/N NSC13-UP | ||||
| 260-0012 Y | [1] | WIRING GP-ENGINE | ||
| 239-1472 Y | [1] | WIRING GP-PANEL (MARINE POWER DISPLAY) | ||
| S/N NSC13-UP | ||||
| 255-0178 Y | [1] | WIRING GP-SENSOR (ENGINE OIL TEMPERATURE) | ||
| S/N NSC1-24 | ||||
| 517-3911 Y | [1] | WIRING GP-SENSOR (OIL TEMPERATURE) | ||
| S/N NSC25-UP | ||||
| 235-6276 Y | [1] | WIRING GP-SENSOR (OIL, FUEL PRESSURE, RH SERVICE) | ||
| 263-3892 | [1] | GENERATOR GP | ||
| 265-8155 | [1] | REGULATOR GP-VOLTAGE | ||
| 193-3313 | [1] | SWITCH AS (TERMINATION) | ||
| S/N NSC1-24 | ||||
| 527-8108 | [1] | SWITCH AS (ETHERNET) | ||
| S/N NSC25-UP | ||||
| 7W-0408 | [1] | BATTERY CHARGER | ||
| S/N NSC1-12 | ||||
| 179-8943 | [1] | CONTROL (LOAD CONTROL, SYNCHRONIZER) | ||
| S/N NSC1-24 | ||||
| 527-8109 | [1] | CONTROL AS-GOVERNOR | ||
| S/N NSC25-UP | ||||
| 527-8107 | [5] | CONTROL AS-GOVERNOR | ||
| S/N NSC25-UP | ||||
| 115-3634 | [1] | FILTER-SOOT | ||
| 353-9022 | [1] | KIT-CONNECTOR | ||
| S/N NSC13-UP | ||||
| (INCLUDES ENDBELL AS, PLUGS, PLUG AS, & SOCKETS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40260003
263-9106: GENERAL AR
263-9106 GENERAL AR
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 268-4718 Y | [2] | ADAPTER GP-AIR CLEANER | ||
| 4P-0558 Y | [2] | AIR CLEANER GP | ||
| 5R-7425 Y | [1] | BARRING GP | ||
| 256-0610 Y | [1] | BASE AS | ||
| 7W-0408 Y | [1] | BATTERY CHARGER | ||
| S/N NSC1-12 | ||||
| 7L-7872 Y | [1] | BATTERY GP (24-VOLT) | ||
| 353-5615 Y | [1] | BOX GP-ELECTRONIC | ||
| S/N NSC13-UP | ||||
| 274-6147 Y | [1] | BOX GP-INSTRUMENT PANEL | ||
| 231-9999 Y | [1] | BOX GP-JUNCTION | ||
| 280-2619 Y | [1] | BOX GP-JUNCTION | ||
| S/N NSC13-UP | ||||
| 263-9581 Y | [1] | CONNECTION GP-WATER | ||
| 284-5428 Y | [1] | CONTACTOR GP | ||
| S/N NSC1-9 | ||||
| 328-1442 Y | [1] | CONTACTOR GP | ||
| S/N NSC10-UP | ||||
| 277-8962 Y | [1] | CONTROL GP-MONITOR | ||
| S/N NSC13-UP | ||||
| 263-3894 Y | [1] | COUPLING GP-GENERATOR | ||
| 340-1487 Y | [2] | COVER GP-SHIPPING | ||
| 262-1032 Y | [1] | ENGINE AR | ||
| 120-4501 Y | [1] | FILTER GP-ENGINE OIL (DUPLEX) | ||
| 7W-9743 Y | [1] | FILTER GP-FUEL (DUPLEX) | ||
| 498-2847 Y | [1] | FILTER GP-FUMES DISPOSAL | ||
| S/N NSC25-UP | ||||
| 120-6704 Y | [1] | FILTER GP-WATER SEP & FUEL | ||
| 262-7329 Y | [1] | FUMES DISPOSAL GP | ||
| S/N NSC1-12 | ||||
| 8N-9639 Y | [1] | GUARD GP-DAMPER | ||
| 275-7814 Y | [1] | GUARD GP-ENGINE | ||
| 7E-6248 Y | [2] | HEATER GP-JACKET WATER | ||
| 266-0214 Y | [1] | HOSE GP-ENGINE | ||
| 262-6893 Y | [1] | LINES GP-AIR STARTING | ||
| 263-9580 Y | [1] | LINES GP-AUXILIARY SEA WATER | ||
| 263-9576 Y | [1] | LINES GP-FUEL | ||
| 286-5754 Y | [1] | MOUNTING GP-AIR CLEANER | ||
| 263-9590 Y | [1] | MOUNTING GP-BATTERY | ||
| 263-9573 Y | [1] | MOUNTING GP-BELLOWS (EXHAUST) | ||
| 268-3189 Y | [2] | MOUNTING GP-BELLOWS (INTERFACE) | ||
| 286-5753 Y | [1] | MOUNTING GP-BOX (POWER DISTRIBUTION) | ||
| 275-7713 Y | [1] | MOUNTING GP-BATTERY CHARGER | ||
| S/N NSC1-12 | ||||
| 357-0895 Y | [1] | MOUNTING GP-CONTROL PANEL (PRELUBRICATION) | ||
| S/N NSC13-UP | ||||
| 275-7714 Y | [1] | MOUNTING GP-ENGINE | ||
| 263-9591 Y | [1] | MOUNTING GP-ENGINE & GENERATOR | ||
| 263-9589 Y | [1] | MOUNTING GP-FUEL FILTER | ||
| 365-4539 Y | [1] | MOUNTING GP-INSTRUMENT PANEL | ||
| S/N NSC13-UP | ||||
| 262-0848 Y | [1] | MOUNTING GP-JACKET WTR HEATER | ||
| 168-3627 Y | [8] | MOUNTING GP-VIBRATION ISOLATOR | ||
| 260-0024 Y | [1] | PANEL AR-CONTROL (PRELUBRICATION) | ||
| S/N NSC13-UP | ||||
| 271-4474 Y | [1] | PANEL GP-ELECTRONIC (EMCP 3.3) | ||
| 259-9999 Y | [1] | PANEL GP-ELECTRONIC (RELAY) | ||
| S/N NSC13-UP | ||||
| 140-2304 Y | [1] | PROGRAMMER-GOV ELEK CONTROL | ||
| 262-7294 Y | [1] | PUMP GP-PRELUBRICATION | ||
| 263-9597 Y | [1] | SENSOR GP-TEMPERATURE (EXHAUST) | ||
| S/N NSC1-12 | ||||
| 244-0474 Y | [1] | SHIELD GP-ENGINE OIL LINES | ||
| 246-0456 Y | [1] | SHIELD GP-PROTECTION | ||
| 268-3764 Y | [1] | SHIELD GP-FUEL LINES | ||
| 274-5749 Y | [1] | SHUTOFF GP-AIR | ||
| 112-6597 Y | [1] | SILENCER GP-AIR STARTING | ||
| 262-9826 Y | [1] | STARTING MOTOR GP-AIR | ||
| 7N-4885 Y | [1] | SWITCH GP-COOLANT LEVEL | ||
| 8N-8510 Y | [1] | VALVE GP-EXPLOSION RELIEF (CRANKCASE) | ||
| 232-0889 Y | [1] | WIRING GP-AIR SHUTOFF | ||
| 277-8960 Y | [1] | WIRING GP-ENGINE | ||
| S/N NSC13-UP | ||||
| 260-0012 Y | [1] | WIRING GP-ENGINE | ||
| 239-1472 Y | [1] | WIRING GP-PANEL (MARINE POWER DISPLAY) | ||
| S/N NSC13-UP | ||||
| 255-0178 Y | [1] | WIRING GP-SENSOR (ENGINE OIL TEMPERATURE) | ||
| S/N NSC1-24 | ||||
| 517-3911 Y | [1] | WIRING GP-SENSOR (OIL TEMPERATURE) | ||
| S/N NSC25-UP | ||||
| 235-6276 Y | [1] | WIRING GP-SENSOR (OIL, FUEL PRESSURE, RH SERVICE) | ||
| 263-3892 | [1] | GENERATOR GP | ||
| 265-8155 | [1] | REGULATOR GP-VOLTAGE | ||
| 193-3313 | [1] | SWITCH AS (TERMINATION) | ||
| S/N NSC1-24 | ||||
| 527-8108 | [1] | SWITCH AS | ||
| S/N NSC25-UP | ||||
| 179-8943 | [1] | CONTROL (LOAD CONTROL, SYNCHRONIZER) | ||
| S/N NSC1-24 | ||||
| 527-8109 | [1] | CONTROL AS-GOVERNOR | ||
| S/N NSC25-UP | ||||
| 527-8107 | [1] | CONTROL AS-GOVERNOR | ||
| S/N NSC25-UP | ||||
| 115-3634 | [1] | FILTER-SOOT | ||
| 353-9022 | [1] | KIT-CONNECTOR | ||
| S/N NSC13-UP | ||||
| (INCLUDES PLUGS, PLUG AS, ENDBELL AS, & SOCKETS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40260004
5R-7425: BARRING GP
5R-7425 BARRING GP -LH
PART OF 262-1014, 263-9106 GENERAL AR
PART OF 262-1014, 263-9106 GENERAL AR
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS#SEBP40260005
247-8341: BASE GP-VALVE COVER
247-8341 BASE GP-VALVE COVER
PART OF 224-9869 VALVE MECHANISM GP
PART OF 224-9869 VALVE MECHANISM GP
#SEBP40260006
106-4586: CAMSHAFT GP
106-4586 CAMSHAFT GP
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 452-2501 | [1] | CAMSHAFT AS (REAR, RH) | |
| 4N-1650 | [1] | DOWEL | ||
| 2. | 5P-0076 | [16] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 3. | 452-2502 | [1] | CAMSHAFT AS (REAR, LH) | |
| 5B-5821 | [1] | DOWEL | ||
| 4. | 452-2503 | [1] | CAMSHAFT AS (FRONT, LH) | |
| 4N-1650 | [1] | DOWEL | ||
| 5. | 7N-3218 C | [2] | WASHER-THRUST | |
| 6. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 7. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 452-2504 | [1] | CAMSHAFT AS (FRONT, RH) | |
| 5B-5821 | [1] | DOWEL | ||
| 9. | 4W-6664 | [2] | PLATE AS-TIMING | |
| 10. | 7N-3216 | [2] | SPACER (35.035X84X12-MM THK) | |
| 11. | 1A-2029 C | [4] | BOLT (3/8-16X1.125-IN) | |
| 12. | 8M-9024 | [4] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 13. | 250-3444 | [1] | FILM-INFORMATION (STANDARD ROTATION) | |
| 14. | 310-2131 | [1] | FILM-INFORMATION (ROTATION, FIRING ORDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP40260007
263-3894: COUPLING GP-GENERATOR
263-3894 COUPLING GP-GENERATOR
PART OF 262-1014, 263-9106 GENERAL AR
PART OF 262-1014, 263-9106 GENERAL AR
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS#SEBP40260008
281-2696: COVER GP-CYLINDER BLOCK
281-2696 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1N-2914 | [10] | COVER-CYLINDER BLOCK SIDE | |
| 2. | 2W-0752 | [1] | GASKET | |
| 3. | 4W-5015 | [1] | COVER | |
| 4. | 7N-3298 | [2] | COVER-BLOCK | |
| 5. | 7N-4945 | [2] | GASKET | |
| 6. | 8N-9992 | [10] | COVER-CAMSHAFT | |
| 7. | 8N-9993 | [2] | COVER-CAMSHAFT | |
| 8. | 117-0066 | [1] | BRACKET-MOUNTING | |
| 9. | 272-0758 | [12] | SEAL | |
| 10. | 272-0759 | [12] | SEAL | |
| 11. | 373-6713 | [2] | COVER | |
| 12. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 13. | 0S-1594 | [8] | BOLT (3/8-16X1-IN) | |
| 14. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 15. | 1A-2029 | [72] | BOLT (3/8-16X1.125-IN) | |
| 16. | 214-7568 | [2] | SEAL-O-RING | |
| 17. | 5M-2894 | [124] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 9S-8004 | [2] | PLUG (9/16-18-THD) | |
| 20. | 9X-8872 | [48] | BOLT-LOCKING (3/8-16X0.875-IN) |
#SEBP40260009
4W-1529: COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
Parts for your 3512B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-1114 | [3] | COVER | |
| 2. | 4H-7869 | [3] | GASKET | |
| 3. | 4B-4043 | [9] | BOLT (5/8-11X1.375-IN) | |
| 4. | 5P-8247 | [9] | WASHER-HARD (17X32X3.5-MM THK) | |
| 5. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 7. | 0S-1594 | [16] | BOLT (3/8-16X1-IN) | |
| 8. | 5M-2894 | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 2P-2772 | [2] | COVER | |
| 10. | 234-8937 | [2] | SEAL-INTEGRAL | |
| 11. | 0L-1352 | [2] | BOLT (3/8-16X3.25-IN) | |
| 12. | 7N-4319 | [2] | COVER | |
| 13. | 7N-4320 | [2] | GASKET | |
| 14. | 165-3929 | [3] | BOLT (3/8-16X1.5-IN) | |
| 15. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 16. | 5F-0304 B | [3] | PLUG | |
| 17. | 4B-8407 B | [4] | GASKET-COPPER | |
| 22. | 5F-0304 | [1] | PLUG | |
| 23. | 4B-8407 | [3] | GASKET-COPPER | |
| 24. | 0S-1594 B | [1] | BOLT (3/8-16X1-IN) | |
| 25. | 5M-2894 B | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 30. | 8T-6765 B | [1] | PLUG-PIPE (1/4-18-THD) | |
| 31. | 104-4767 | [2] | ADAPTER | |
| 32. | 104-4767 B | [1] | ADAPTER | |
| 33. | 3K-0360 B | [3] | SEAL-O-RING | |
| 34. | 9S-4185 B | [3] | PLUG (3/4-16-THD) | |
| B | USE AS REQUIRED | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18
2010/10/18
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Alignment of Diesel Generator Sets with the Two-Bearing Generator {1000, 4450, 7002}
Alignment of Diesel Generator Sets with the Two-Bearing Generator {1000, 4450, 7002}
Alignment of Diesel Generator Sets with the Two-Bearing Generator {1000, 4450, 7002}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Troubleshooting
Service Magazine
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3512B :
Truck sale:
182,189
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH



