COOLING SYSTEM
HEAT EXCHANGER GPLINES GP-WATER
PUMP GP-WATER
COOLING SYSTEM
HEAT EXCHANGER GP
#SEBP40300180
245-9841: HEAT EXCHANGER GP-SEA WATER
245-9841 HEAT EXCHANGER GP-SEA WATER
PART OF 241-5707 TANK GP-EXPANSION
AN ATTACHMENT
PART OF 241-5707 TANK GP-EXPANSION
AN ATTACHMENT
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-9486 | [4] | LINER | |
| 2. | 136-9487 | [4] | COLLAR | |
| 3. | 164-4537 | [10] | WASHER (17X32X3.5-MM THK) | |
| 4. | 245-3070 | [1] | FRAME-FRONT | |
| 5. | 245-9826 Y | [1] | PLATE GP-HEAT EXCHANGER | |
| 6. | 261-4980 | [10] | SPACER | |
| 7. | 130-2321 | [10] | WASHER (13.5X25.5X3-MM THK) | |
| 8. | 144-6652 | [10] | BOLT (1/2-13X2.25-IN) | |
| 9. | 166-4392 | [2] | SPACER-SPECIAL | |
| 10. | 164-4539 | [10] | BOLT (5/8-11X3.5-IN) | |
| 11. | 213-0300 | [1] | FRAME | |
| 162-7120 F | [2] | PIN | ||
| 248-6745 F | [2] | BAR | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40300181
4W-4642: HEAT EXCHANGER GP-SEA WATER
4W-4642 HEAT EXCHANGER GP-SEA WATER
1016-MM DOUBLE PASS
PART OF 107-1728 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
1016-MM DOUBLE PASS
PART OF 107-1728 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6L-2284 J | [3] | ROD-ZINC (HEAT EXCHANGER) | |
| 2. | 6L-2286 J | [3] | PLUG-PIPE | |
| 3. | 8L-9767 B | [32] | SHIM (0.015-IN THK) | |
| 4. | 155-2590 | [1] | GASKET | |
| 5. | 155-2591 | [1] | GASKET | |
| 6. | 155-2592 | [1] | SEAL | |
| 7. | 155-2596 | [2] | BRACKET AS | |
| 8. | 290-8204 | [1] | CORE AS (HEAT EXCHANGER) | |
| 9. | 1H-1200 | [1] | PIN-SPRING | |
| 10. | 3N-9606 | [2] | U-BOLT | |
| 11. | 6V-8182 | [16] | NUT (3/4-10-THD) | |
| 12. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 13. | 7X-0370 | [8] | BOLT (3/4-10X3.5-IN) | |
| 14. | 8C-6857 | [8] | BOLT (3/4-10X2.75-IN) | |
| 15. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 8T-4994 | [16] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 17. | 9B-0887 | [4] | PLUG-PIPE | |
| B | USE AS REQUIRED | |||
| J | ROD AND PLUG MUST BE SERVICED TOGETHER | |||
#SEBP40300182
4W-4652: HEAT EXCHANGER GP-SEA WATER
4W-4652 HEAT EXCHANGER GP-SEA WATER
1270-MM DOUBLE PASS
PART OF 107-1730 HEAT EXCHANGER GP-SEA WATER
Type 1
FIELD REPLACEMENT FOR @@@@@134-3530@@@@@
AN ATTACHMENT
1270-MM DOUBLE PASS
PART OF 107-1730 HEAT EXCHANGER GP-SEA WATER
Type 1
FIELD REPLACEMENT FOR @@@@@134-3530@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS#SEBP40300183
4W-4652: HEAT EXCHANGER GP-SEA WATER
4W-4652 HEAT EXCHANGER GP-SEA WATER
1270-MM DOUBLE PASS
PART OF 107-1730 HEAT EXCHANGER GP-SEA WATER
Type 2
FIELD REPLACEMENT FOR @@@@@134-3530@@@@@
AN ATTACHMENT
1270-MM DOUBLE PASS
PART OF 107-1730 HEAT EXCHANGER GP-SEA WATER
Type 2
FIELD REPLACEMENT FOR @@@@@134-3530@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6L-2284 J | [3] | ROD-ZINC (HEAT EXCHANGER) | |
| 2. | 6L-2286 J | [3] | PLUG-PIPE | |
| 3. | 8L-9767 B | [32] | SHIM (0.015-IN THK) | |
| 4. | 155-2590 C | [1] | GASKET | |
| 5. | 155-2591 C | [1] | GASKET | |
| 6. | 155-2592 C | [1] | SEAL | |
| 7. | 155-2596 C | [2] | BRACKET AS | |
| 8. | 290-8203 C | [1] | CORE AS (HEAT EXCHANGER) | |
| 9. | 1H-1200 C | [1] | PIN-SPRING | |
| 10. | 3N-9606 C | [2] | U-BOLT | |
| 11. | 6V-8182 C | [16] | NUT (3/4-10-THD) | |
| 12. | 6V-8801 C | [4] | NUT (3/8-16-THD) | |
| 13. | 7X-0370 C | [8] | BOLT (3/4-10X3.5-IN) | |
| 14. | 8C-6857 C | [8] | BOLT (3/4-10X2.75-IN) | |
| 15. | 8T-4896 C | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 8T-4994 C | [16] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 17. | 9B-0887 | [3] | PLUG-PIPE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | ROD AND PLUG MUST BE SERVICED TOGETHER | |||
#SEBP40300184
216-6217: HOUSING & REGULATOR GP
216-6217 HOUSING & REGULATOR GP -AFTERCOOLER
PART OF 251-8259 LINES GP-WATER
PART OF 251-8259 LINES GP-WATER
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-9643 | [2] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 2. | 6V-1454 | [2] | SEAL-O-RING | |
| 3. | 214-0728 | [1] | HOUSING | |
| 4. | 214-0729 | [1] | ADAPTER | |
| 5. | 219-3240 | [2] | REGULATOR-TEMPERATURE (30-DEG C)(WATER) | |
| 6. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 7. | 3K-0360 | [2] | SEAL-O-RING | |
| 8. | 9S-8005 | [2] | PLUG (3/4-16-THD) |
#SEBP40300185
241-4302: HOUSING & REGULATOR GP
241-4302 HOUSING & REGULATOR GP -INLET CONTROL
PART OF 241-5707, 250-0838 TANK GP-EXPANSION
AN ATTACHMENT
PART OF 241-5707, 250-0838 TANK GP-EXPANSION
AN ATTACHMENT
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS#SEBP40300186
8N-7643: HOUSING & REGULATOR GP
8N-7643 HOUSING & REGULATOR GP -INLET CONTROL
FOR USE WITH EXPANSION TANK AND STANDBY GENERATOR ENGINE
FOR USE WITH EXPANSION TANK AND STANDBY GENERATOR ENGINE
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6466 | [1] | HOUSING AS-REGULATOR | |
| 1A. | 3S-9643 | [4] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 2. | 248-5513 | [4] | REGULATOR-TEMPERATURE (92-DEG C)(WATER) | |
| 3. | 1A-5183 | [5] | BOLT (3/8-16X4.75-IN) | |
| 4. | 0S-1588 | [5] | BOLT (3/8-16X1.25-IN) | |
| 5. | 7N-4927 | [1] | GASKET-HOUSING COVER | |
| 6. | 9S-4182 C | [1] | PLUG (7/16-20-THD) | |
| 7. | 6V-9027 C | [1] | SEAL-O-RING | |
| 8. | 106-3512 BC | [2] | PLATE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP40300187
231-6346: KIT-WATER PUMP
231-6346 KIT-WATER PUMP
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9Y-8175 Y | [1] | PUMP GP-AUXILIARY WATER (AFTERCOOLER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40300188
231-6347: KIT-WATER PUMP
231-6347 KIT-WATER PUMP
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2W-9729 Y | [1] | PUMP GP-WATER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40300189
282-5199: KIT-WATER PUMP
282-5199 KIT-WATER PUMP
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
EXPORT-BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY AND EXTERNALLY ATTACHED PACKING LIST.
FIELD INSTALLATION
For full view, you need register
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8N-8466 Y | [1] | PUMP GP-AUXILIARY SEA WATER | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
COOLING SYSTEM
HEAT EXCHANGER GP
Operation and Maintenance Manual
Special Instruction
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
Service Letter-CFEL
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HEAT EXCHANGER PLATES IN 206-6476 HEAT EXCHANGER ON CERTAIN 3512B MARINE ENGINES
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Caterpillar Parts SIS Catalog 3512B :
Truck sale:
182,189
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
