ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP40370530
183-9234: WIRING GP-SECONDARY STEERING
183-9234 WIRING GP-SECONDARY STEERING
S/N JMS5000-UP
PART OF 184-4740 STEERING AR-SECONDARY
S/N JMS5000-UP
PART OF 184-4740 STEERING AR-SECONDARY
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [1] | STRAP-CABLE | |
| 2. | 130-5300 C | [1] | CLIP | |
| 3. | 192-5017 C | [1] | BRACKET AS | |
| 4. | 331-1621 C | [1] | HARNESS AS-STEERING | |
| 5. | 130-5301 | [1] | CLIP | |
| 6. | 2T-3019 C | [1] | CLIP (LOOP) | |
| 7. | 313-5104 C | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE | |||
| 8. | 3K-0360 | [1] | SEAL-O-RING | |
| 9. | 132-5789 C | [1] | CLIP (LADDER) | |
| 10. | 5P-9297 | [1] | CLIP (LOOP) | |
| 11. | 7K-1181 C | [1] | STRAP-CABLE | |
| 12. | 8T-4121 C | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40370531
228-2704: WIRING GP-SENSOR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1939 | [4] | CLAMP | |
| 2. | 107-4749 | [2] | PLATE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 351-8949 | [1] | HARNESS AS-SENSOR (TILT, REAR) | |
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 5P-1442 E | HOSE (96-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 5. | 351-5822 | [1] | HARNESS AS-SENSOR (TILT, FRONT) | |
| 8T-5346 E | TUBE-HEAT SHRINK (19.1-MM DIA)(10-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 6. | 5P-9085 | [1] | CLIP (LOOP) | |
| 7. | 130-5300 | [1] | CLIP | |
| 8. | 147-0385 | [1] | CLIP | |
| 9. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| 10. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 13. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 14. | 3S-8664 | [4] | CLIP (LOOP) | |
| 15. | 3S-2093 | [1] | STRAP-CABLE | |
| 16. | 4P-7581 | [1] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40370532
263-4168: WIRING GP-SENSOR
263-4168 WIRING GP-SENSOR -AUTODIG, PAYLOAD
S/N JMS4000-UP
PART OF 233-9781 CONTROL AR-AUTODIG, 225-5539 ELECTRICAL AR, 238-6681 MONITOR AR-PAYLOAD
S/N JMS4000-UP
PART OF 233-9781 CONTROL AR-AUTODIG, 225-5539 ELECTRICAL AR, 238-6681 MONITOR AR-PAYLOAD
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [6] | STRAP-CABLE | |
| 2. | 136-9699 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 263-4169 | [1] | HARNESS AS-MONITOR (PAYLOAD) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 5P-9297 | [2] | CLIP (LOOP) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40370533
397-8809: WIRING GP-STEERING
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-8078 | [2] | CLIP | |
| 2. | 218-0654 Y | [1] | STEERING WHEEL GP | |
| 3. | 332-5240 | [1] | CLIP | |
| 4. | 3S-2093 | [1] | STRAP-CABLE | |
| 5. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40370534
257-4183: WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
S/N JMS1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
S/N JMS1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP40370535
248-5554: WIRING GP-WASTE HANDLER
248-5554 WIRING GP-WASTE HANDLER
S/N JMS1-UP
PART OF 243-2045 ACTUATOR GP-POWER
S/N JMS1-UP
PART OF 243-2045 ACTUATOR GP-POWER
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [22] | STRAP-CABLE | |
| 2. | 157-1364 | [1] | SWITCH AS-TOGGLE (FRONT POWER GUARD ACTUATOR) | |
| 2A. | 157-1364 | [1] | SWITCH AS-TOGGLE (REAR POWER GUARD ACTUATOR) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 215-4248 | [1] | PLATE | |
| 4. | 232-6174 | [1] | WIRE AS | |
| 5. | 248-5555 | [1] | HARNESS AS-CONTROL (POWER GUARD ACTUATOR) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT-CONNECTING INCLUDES PLUG & WEDGE) | ||||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 114-8843 E | SLEEVE-PLASTIC (90-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 6. | 130-5300 | [3] | CLIP | |
| 7. | 174-5907 | [2] | CLIP (LOOP) | |
| 8. | 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE)(POWER GUARD ACTUATOR) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 9. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 10. | 5P-9297 | [2] | CLIP (LOOP) | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40370536
391-9603: AXLE & AXLE OIL COOLER AR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP40370537
232-7559: AXLE AR-FIXED
232-7559 AXLE AR-FIXED -FRONT
S/N JMS1-UP
PART OF 328-9870, 328-9873 CONFIGURATION AR, 232-6585 POWER TRAIN AR
S/N JMS1-UP
PART OF 328-9870, 328-9873 CONFIGURATION AR, 232-6585 POWER TRAIN AR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 392-8077 Y | [1] | AXLE GP-FIXED (FRONT) | ||
| 208-5972 Y | [1] | BRAKE GP-SERVICE (DAMPER)(RH) | ||
| 208-5974 Y | [1] | BRAKE GP-SERVICE (DAMPER)(LH) | ||
| 388-0373 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (STANDARD) | ||
| 124-3758 Y | [1] | LINES GP-SERVICE BRAKE | ||
| 393-0719 Y | [1] | SENSOR GP-TEMPERATURE (AXLE COOLER OIL) | ||
| 232-7554 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40370538
232-7735: AXLE AR-FIXED
232-7735 AXLE AR-FIXED -FRONT, LIMITED SLIP DIFFERENTIAL
S/N JMS1-UP
PART OF 328-9872, 328-9875 CONFIGURATION AR
S/N JMS1-UP
PART OF 328-9872, 328-9875 CONFIGURATION AR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 173-0547 Y | [1] | AXLE GP-FIXED (FRONT) | ||
| -OR- | ||||
| 392-8077 Y | [1] | AXLE GP-FIXED (FRONT) | ||
| 208-5972 Y | [1] | BRAKE GP-SERVICE (DAMPER)(DAMPER) | ||
| 208-5974 Y | [1] | BRAKE GP-SERVICE (DAMPER) | ||
| 183-4683 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (LIMITED SLIP) | ||
| -OR- | ||||
| 251-7687 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (LIMITED SLIP) | ||
| -OR- | ||||
| 388-0374 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (LIMITED SLIP) | ||
| 124-3758 Y | [1] | LINES GP-SERVICE BRAKE | ||
| 393-0719 Y | [1] | SENSOR GP-TEMPERATURE | ||
| 232-7554 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40370539
365-6923: AXLE AR-FIXED
365-6923 AXLE AR-FIXED -FRONT
S/N JMS1-UP
ECOLOGY DRAIN VALVE
PART OF 366-5790 AXLE AR-FIXED & OSCILLATING
S/N JMS1-UP
ECOLOGY DRAIN VALVE
PART OF 366-5790 AXLE AR-FIXED & OSCILLATING
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 371-5143 Y | [1] | AXLE GP-FIXED (FRONT) | ||
| 208-5972 Y | [1] | BRAKE GP-SERVICE (DAMPER)(LH) | ||
| 208-5974 Y | [1] | BRAKE GP-SERVICE (DAMPER)(RH) | ||
| 252-7847 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (STANDARD) | ||
| -OR- | ||||
| 388-0373 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (STANDARD) | ||
| 124-3758 Y | [1] | LINES GP-SERVICE BRAKE | ||
| 393-0719 Y | [1] | SENSOR GP-TEMPERATURE (AXLE COOLER OIL) | ||
| 371-5138 Y | [2] | WHEEL & FINAL DRIVE GP (ECOLOGY DRAIN VALVE) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
