AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION S/N JMS1-5255 PART OF 232-1393 CAB AR-ENCLOSED ROPS, 203-9837, 258-1565 CANOPY AR-OPEN ROPS 980H


OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC

WHEEL LOADER 980H WHEEL LOADER JMS
 980H Wheel Loader JMS00001-UP (MACHINE) POWERED BY C15 Engine SEBP4037 980H JMS   (2004)

OPERATOR STATION

CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
213-6015 CONTROL GP-ELECTROHYDRAULIC
 

#SEBP40371220
 

208-3915: CONTROL GP-ELECTROHYDRAULIC

208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N JMS1-5255
PART OF 232-1393 CAB AR-ENCLOSED ROPS, 203-9837, 258-1565 CANOPY AR-OPEN ROPS
i01743120 SEBP4037
2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 5C-2874 M [4] NUT (M5X0.8-THD)  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
6. 9X-2026 [9] WASHER (6.5X17X1-MM THK)  
7. 3S-2093 [2] STRAP-CABLE  
8. 105-3372 [1] SPRING  
9. 106-1582 [1] HOUSING  
10. 106-1583 [2] ROD  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 139-1378 [4] BEARING  
14. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
15. 149-3949 [2] LEVER-CONTROL  
16. 214-4862 CY [2] SENSOR GP-POSITION (CONTROL LEVER)  
17. 163-8119 [2] SPRING  
18. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
19. 173-2125 [1] COVER  
20. 173-2127 [1] COVER  
21. 6V-9335 BD SEAL  
22. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
23. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
24. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
25. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
26. 207-7447 [2] PLATE  
27. 208-3916 [1] BRACKET  
28. 208-3917 [1] BRACKET  
29. 208-3918 [1] PLATE  
30. 208-8333 [2] COVER  
31. 209-9250 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
33. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
34. 5C-2890 M [1] NUT (M6X1-THD)  
35. 5P-8523 [1] GROMMET  
36. 5P-8524 [1] GROMMET  
37. 8T-4971 M [4] BOLT (M6X1X30-MM)  
38. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
39. 8M-2771 [2] CLIP  
40. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
41. 8T-4970 M [10] BOLT (M6X1X14-MM)  
42. 9X-2044 M [7] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 090-4808 BD SEAL  
44. 5P-6120 BD TRIM-EDGE  
45. 8L-8413 [2] STRAP-CABLE (WHITE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371221
 

208-3915: CONTROL GP-ELECTROHYDRAULIC

208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N JMS1-UP
PART OF 258-1565 CANOPY AR-OPEN ROPS
i05030190 SEBP4037
2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 5C-2874 M [4] NUT (M5X0.8-THD)  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
6. 9X-2026 [9] WASHER (6.5X17X1-MM THK)  
7. 3S-2093 [2] STRAP-CABLE  
8. 105-3372 [1] SPRING  
9. 106-1582 [1] HOUSING  
10. 106-1583 [2] ROD  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 139-1378 [4] BEARING  
14. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
15. 149-3949 [2] LEVER-CONTROL  
16. 266-1477 CY [2] SENSOR GP-POSITION (CONTROL LEVER)  
17. 163-8119 [2] SPRING  
18. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
19. 173-2125 [1] COVER  
20. 173-2127 [1] COVER  
21. 6V-9335 D SEAL (0.1-M EACH)  
22. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
23. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
24. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
25. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
26. 207-7447 [2] PLATE  
27. 208-3916 [1] BRACKET  
28. 208-3917 [1] BRACKET  
29. 208-3918 [1] PLATE  
30. 208-8333 [2] COVER  
31. 209-9250 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
33. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
34. 5C-2890 M [1] NUT (M6X1-THD)  
35. 5P-8523 [1] GROMMET  
36. 5P-8524 [1] GROMMET  
37. 8T-4971 M [4] BOLT (M6X1X30-MM)  
38. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
39. 8M-2771 [2] CLIP  
40. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
41. 8T-4970 M [10] BOLT (M6X1X14-MM)  
42. 9X-2044 M [7] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 8T-3392 D SEAL (0.2-M)  
43A. 8T-3392 D SEAL (0.1-M EACH)  
44. 5P-6120 D TRIM-EDGE (0.6-M)  
45. 8L-8413 [2] STRAP-CABLE (WHITE)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371222
 

210-9583: CONTROL GP-ELECTROHYDRAULIC

210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N JMS1-UP
PART OF 249-6705 CONTROL AR-HIGH LIFT, 267-3804 CONTROL AR-RIDE, 247-4867, 249-6704 HYDRAULIC AR-3 VALVE, 329-6624 LOGGING AR
i02015490 SEBP4037
2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5C-2874 M [4] NUT (M5X0.8-THD)  
3. 262-6873 [2] SPACER  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
6. 9N-6249 [1] SPRING-RETAINING  
7. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
8. 105-2976 [2] FLANGE  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 114-8165 [2] ROD  
14. 139-1378 [6] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [3] LEVER-CONTROL  
17. 262-6875 [2] SPACER  
18. 266-1477 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
19. 163-8119 [3] SPRING  
20. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
21. 210-6782 [1] COVER  
22. 238-2771 C [1] COVER  
23. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 262-6870 C [1] PLATE AS  
32. 211-7710 [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
33. 211-8285 [1] PLATE  
34. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
35. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
36. 5C-2890 M [1] NUT (M6X1-THD)  
37. 5P-8523 [1] GROMMET  
38. 5P-8524 [1] GROMMET  
39. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
40. 7X-2533 M [3] BOLT (M6X1X35-MM)  
41. 7X-2619 M [1] BOLT (M6X1X10-MM)  
42. 8C-8451 M [1] BOLT (M6X1X40-MM)  
43. 8M-2771 [2] CLIP  
44. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 8T-4970 M [10] BOLT (M6X1X14-MM)  
46. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 090-4808 D SEAL (0.16-M)  
47A. 090-4808 D SEAL (0.07-M EACH)  
48. 6V-9335 CD SEAL (0.16-M)  
48A. 6V-9335 CD SEAL (0.50-M)  
49. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
50. 3S-2093 [3] STRAP-CABLE  
51. 5F-9757 [2] GROMMET  
52. 5P-6120 D TRIM-EDGE (0.85-M)  
53. 8L-8413 [3] STRAP-CABLE (WHITE)  
54. 9X-2043 CM [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
55. 262-6872 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371223
 

213-6015: CONTROL GP-ELECTROHYDRAULIC

213-6015 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N JMS1-UP
i02138342 SEBP4037
2136015 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2136015 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
8. 213-6020 [1] COVER  
9. 226-8664 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION)  
10. 233-6564 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  7K-1181 [1] STRAP-CABLE  
  8T-8730 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [16] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  218-4935 [1] SUPPRESSOR-ARC  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 D TRIM-EDGE (0.2-M EACH)  
22A. 5P-6120 D TRIM-EDGE (0.4-M)  
23. 8R-3695 B [1] GROMMET  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371224
 

233-0208: CONTROL GP-ELECTROHYDRAULIC

233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N JMS1-5299
CANNOT BE USED WITH 3-VALVE RIDE CONTROL, BLOCK HANDLER AR
i02089876 SEBP4037
2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
8. 213-6020 [1] COVER  
9. 220-6102 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG)  
10. 233-6565 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 D TRIM-EDGE (0.4-M)  
22A. 5P-6120 D TRIM-EDGE (0.115-M EA)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371225
 

233-0208: CONTROL GP-ELECTROHYDRAULIC

233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N JMS5300-UP
CANNOT BE USED WITH 3-VALVE RIDE CONTROL, BLOCK HANDLER AR
i03739260 SEBP4037
2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
6. 213-6020 [1] COVER  
7. 220-6102 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG)  
8. 233-6565 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG)  
9. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [16] PLUG-SEAL  
  8T-8730 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7K-1181 [1] STRAP-CABLE  
  218-4935 [1] SUPPRESSOR-ARC  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
10. 6R-7653 M [2] SCREW (M6X1X15-MM)  
11. 8T-4205 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 8T-4970 M [2] BOLT (M6X1X14-MM)  
13. 9X-2044 CM [12] SCREW-TRUSS HEAD (M6X1X16-MM)  
14. 5P-6120 D TRIM-EDGE (0.4-M)  
14A. 5P-6120 D TRIM-EDGE (0.2-M EACH)  
15. 8R-3695 B [1] GROMMET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371226
 

233-0209: CONTROL GP-ELECTROHYDRAULIC

233-0209 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION WITH AUTODIG
S/N JMS1-UP
i02089885 SEBP4037
2330209 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 332-9285 Y [1] CONTROL GP-ELECTROHYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371227
 

243-1089: CONTROL GP-ELECTROHYDRAULIC

243-1089 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N JMS5256-5299
PART OF 232-1393 CAB AR-ENCLOSED ROPS
i02781803 SEBP4037
2431089 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8722 [4] NUT (RETAINER)  
2. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
3. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
4. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
5. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
6. 307-4671 CY [1] CONTROL GP-HANDLE (PILOT CONTROL)(TILT)  
6A. 307-4671 CY [1] CONTROL GP-HANDLE (PILOT CONTROL)(LIFT)  
7. 245-6447 [1] CUSHION AS  
8. 247-4184 [1] FILM-IDENTIFICATION (DOWNSHIFT SWITCH)  
9. 247-4969 [1] PLATE  
10. 262-5236 [1] COVER  
11. 262-5239 [1] HOUSING AS  
12. 262-5240 [1] PLATE AS  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
14. 8R-3695 [2] GROMMET  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 8T-4970 M [2] BOLT (M6X1X14-MM)  
17. 9X-2038 [4] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [17] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
20. 6V-3987 D SEAL (0.1-M EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371228
 

243-1089: CONTROL GP-ELECTROHYDRAULIC

243-1089 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N JMS5300-UP
PART OF 232-1393 CAB AR-ENCLOSED ROPS
i03739701 SEBP4037
2431089 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8722 [4] NUT (RETAINER)  
3. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
4. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
5. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
6. 307-4671 Y [1] CONTROL GP-HANDLE (PILOT CONTROL)(TILT)  
6A. 307-4671 Y [1] CONTROL GP-HANDLE (PILOT CONTROL)(LIFT)  
7. 245-6447 [1] CUSHION AS  
9. 247-4969 [1] PLATE  
10. 262-5236 [1] COVER  
11. 262-5239 [1] HOUSING AS  
12. 262-5240 [1] PLATE AS  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
14. 8R-3695 [2] GROMMET  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 8T-4970 M [2] BOLT (M6X1X14-MM)  
17. 9X-2038 [4] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [17] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
20. 6V-3987 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40371229
 

243-1940: CONTROL GP-ELECTROHYDRAULIC

243-1940 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N JMS5256-UP
PART OF 267-3804 CONTROL AR-RIDE
i02781797 SEBP4037
2431940 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 980H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 332-9284 Y [1] CONTROL GP-ELECTROHYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 980H :

CONTROL & MTG GP-JOYSTICK
464-4860 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
464-4858 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
363-9926 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
363-9924 CONTROL & MTG GP-JOYSTICK
CONDENSER & MTG GP-REFRIGERANT
235-5332 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
262-4948 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
218-0324 COMPRESSOR GP-REFRIGERANT
258-1565 CANOPY AR-OPEN ROPS
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
213-6015 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0209 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
243-1089 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
243-1089 CONTROL GP-ELECTROHYDRAULIC

Truck sale:

Caterpillar 980H
 
Caterpillar 980H
- Wheel Loaders
FOLEY, INC.
Caterpillar 980H, Wheel Loaders, Construction
122,414 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
SOTREQ S.A.
Caterpillar 980H, Wheel Loaders, Construction
131,000 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
BOYD CAT COMPANY
Caterpillar 980H, Wheel Loaders, Construction
97,000 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980H, Wheel Loaders, Construction
448,873 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.