ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINEHEATER GP
BOX GP
TRANSFORMER GP
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE#SEBP40470810
279-0867: MOUNTING GP-ELECTRONIC CONTROL
279-0867 MOUNTING GP-ELECTRONIC CONTROL -POINTGUARD
S/N ZAD1-UP
AN ATTACHMENT
S/N ZAD1-UP
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 279-0864 | [1] | CONTROL AS-MONITORING (POINTGUARD, M300) | |
| 2. | 279-0865 | [1] | CABLE AS | |
| 3. | 279-0866 | [1] | TERMINAL BLOCK AS | |
| 179-8786 | [3] | BLOCK-TERMINAL (600-VOLT, 20-AMPERE) | ||
| 279-0870 | [1] | KIT-MARKER | ||
| 4. | 279-0871 | [1] | HARNESS AS-CONTROL (POINTGUARD) | |
| 9X-6772 | [3] | STRAP-CABLE | ||
| 109-3038 | [7] | END-WIRE (16-GA) | ||
| 110-8714 | [8] | END-WIRE (18-GA) | ||
| 5. | 305-0762 | [1] | CABLE AS | |
| 6. | 6V-8214 M | [4] | BOLT (M6X1X20-MM) | |
| 7. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 8. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| M | METRIC PART | |||
#SEBP40470811
136-9729: MOUNTING GP-JACKET WTR HEATER
136-9729 MOUNTING GP-JACKET WTR HEATER -LH
S/N ZAD1-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, RH PRELUBE CONVERSION
AN ATTACHMENT
S/N ZAD1-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, RH PRELUBE CONVERSION
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-1707 | [1] | BRACKET AS | |
| 2. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
| 3. | 8S-5107 | [2] | SPACER (0.622X0.84X2-IN THK) | |
| 4. | 183-5975 CI | [1] | HOSE AS | |
| 5. | 5P-8250 | [2] | WASHER (28X49X5-MM THK) | |
| 6. | 9S-1368 | [2] | BOLT (1-14X3.5-IN) | |
| 7. | 1S-2303 | [2] | SPACER (1.062X1.75X1.44-IN THK) | |
| 8. | 8T-6726 | [2] | CLAMP-HOSE | |
| 9. | 6F-0496 | [1] | TEE-PIPE | |
| 10. | 3E-7430 | [1] | PLUG-PIPE | |
| 11. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 12. | 3B-6491 | [1] | COUPLING-PIPE | |
| 13. | 177-9116 CI | [1] | HOSE AS | |
| 14. | 7L-8074 | [1] | ELBOW-REDUCING | |
| 15. | 8N-8550 | [1] | ELBOW | |
| 16. | 7N-4945 | [1] | GASKET | |
| 17. | 0S-1594 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 7D-4092 C | [2] | CLIP | |
| 19. | 9X-8874 | [2] | BOLT (1/2-13X3-IN) | |
| 20. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 6H-8297 | [1] | ELBOW | |
| 22. | 6B-9081 | [1] | BUSHING-REDUCER | |
| 23. | 1L-4031 | [1] | TEE-SERVICE | |
| 24. | 118-1656 C | [1] | BUSHING-REDUCER | |
| 25. | 8C-1358 | [2] | VALVE-BALL (ISOLATOR) | |
| 26. | 004-7270 | [1] | FITTING-PIPE | |
| 27. | 2N-7308 | [1] | CONNECTOR-PIPE | |
| 28. | 3B-7270 | [1] | NIPPLE-PIPE | |
| 29. | 6B-8128 | [1] | NIPPLE-PIPE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP40470812
166-6654: MOUNTING GP-JACKET WTR HEATER
166-6654 MOUNTING GP-JACKET WTR HEATER -RH
S/N ZAD1-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT
S/N ZAD1-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2303 | [2] | SPACER (1.062X1.75X1.44-IN THK) | |
| 2. | 2N-7308 | [1] | CONNECTOR-PIPE | |
| 3. | 4W-2109 | [2] | RETAINER | |
| 4. | 4W-2110 | [1] | RING-RETAINING | |
| 5. | 8T-6726 | [2] | CLAMP-HOSE | |
| 6. | 6F-0496 | [1] | TEE-PIPE | |
| 7. | 7C-1707 | [1] | BRACKET AS | |
| 5P-2251 | [1] | GUSSET | ||
| 8. | 7N-4945 | [1] | GASKET | |
| 9. | 8C-1358 | [2] | VALVE-BALL | |
| 10. | 9S-1368 | [2] | BOLT (1-14X3.5-IN) | |
| 11. | 9Y-3108 | [1] | BRACKET | |
| 12. | 134-3100 | [1] | FLANGE | |
| 13. | 166-8067 I | [1] | HOSE AS | |
| 14. | 183-5975 I | [1] | HOSE AS | |
| 15. | 258-8952 | [1] | TUBE AS | |
| 16. | 003-9163 | [1] | ELBOW | |
| 17. | 030-8307 | [1] | CONNECTOR | |
| 18. | 6W-2928 | [1] | BOSS | |
| 19. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 20. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 21. | 3B-6498 | [1] | ELBOW | |
| 22. | 3B-7745 | [1] | NIPPLE-PIPE | |
| 23. | 3E-7430 | [1] | PLUG-PIPE | |
| 24. | 5F-6371 | [1] | CONNECTOR | |
| 25. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 5P-8250 | [2] | WASHER (28X49X5-MM THK) | |
| 27. | 6B-9081 | [1] | BUSHING-REDUCER | |
| 28. | 7C-4354 | [1] | CLIP | |
| 29. | 7D-7233 | [1] | CLIP (LOOP) | |
| 30. | 9L-9132 | [1] | WASHER (10.2X25.5X2.5-MM THK) | |
| 31. | 9M-4849 | [1] | SEAL-O-RING | |
| 32. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 33. | 0S-1608 | [1] | BOLT (3/8-16X3.75-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP40470813
307-8459: MOUNTING GP-JACKET WTR HEATER
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 307-9376 I | [1] | HOSE AS | |
| 2. | 307-9377 I | [1] | HOSE AS | |
| 3. | 131-4863 | [1] | ELBOW | |
| 4. | 184-7211 | [2] | CLIP | |
| 5. | 2B-0941 | [2] | SPACER (10.5X19X19-MM THK) | |
| 6. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 7. | 5K-9090 | [5] | SEAL-O-RING | |
| 8. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 6V-9854 | [1] | ELBOW (SWIVEL) | |
| 10. | 7D-4092 | [1] | CLIP | |
| 11. | 7X-0326 | [1] | BOLT (1/2-13X3-IN) | |
| 12. | 8C-6875 | [3] | CONNECTOR | |
| 13. | 8S-5107 | [1] | SPACER (0.622X0.84X2-IN THK) | |
| 14. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 15. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 18. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP40470814
252-7361: MOUNTING GP-TERMINAL STRIP
252-7361 MOUNTING GP-TERMINAL STRIP -LOAD SHARE
S/N ZAD1-UP
MEDIUM VOLTAGE
AN ATTACHMENT
S/N ZAD1-UP
MEDIUM VOLTAGE
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS#SEBP40470815
252-7374: MOUNTING GP-TRANSFORMER
252-7374 MOUNTING GP-TRANSFORMER -POTENTIAL
S/N ZAD1-UP
FOR USE WITH LOW AND MEDIUM VOLTAGE
AN ATTACHMENT
S/N ZAD1-UP
FOR USE WITH LOW AND MEDIUM VOLTAGE
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 252-7359 | [1] | HARNESS AS-WIRING (POTENTIAL TRANSFORMER) | |
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 109-3038 | [3] | END-WIRE (16-GA) | ||
| 2. | 289-0656 Y | [2] | TRANSFORMER GP-CURRENT | |
| 3. | 252-7446 | [1] | HARNESS AS-WIRING (POTENTIAL TRANSFORMER) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 109-3038 | [3] | END-WIRE (16-GA) | ||
| 4. | 4B-2043 | [8] | NUT (8-32-THD) | |
| 5. | 4B-4863 | [16] | WASHER (4.7X11X1.2-MM THK) | |
| 6. | 9X-8486 | [8] | SCREW-MACHINE (8-32X0.75-IN) | |
| 7. | 9X-6772 | [6] | STRAP-CABLE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40470816
269-7011: MOUNTING GP-TRANSFORMER
269-7011 MOUNTING GP-TRANSFORMER
S/N ZAD1-428
FOR USE WITH NEMA OR IEC BUS CONFIGURATIONS
AN ATTACHMENT
S/N ZAD1-428
FOR USE WITH NEMA OR IEC BUS CONFIGURATIONS
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS#SEBP40470817
269-7011: MOUNTING GP-TRANSFORMER
269-7011 MOUNTING GP-TRANSFORMER
S/N ZAD429-UP
FOR USE WITH NEMA OR IEC BUS CONFIGURATIONS
AN ATTACHMENT
S/N ZAD429-UP
FOR USE WITH NEMA OR IEC BUS CONFIGURATIONS
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 284-9561 | [10] | PLATE-PROTECTION | |
| 2. | 5C-2890 CM | [14] | NUT (M6X1-THD) | |
| 3. | 5P-4115 C | [28] | WASHER-HARD (7.2X19X2-MM THK) | |
| 4. | 7X-2535 M | [8] | BOLT (M6X1X60-MM) | |
| 5. | 8T-4971 CM | [2] | BOLT (M6X1X30-MM) | |
| 6. | 8T-6974 M | [4] | BOLT (M6X1X80-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP40470818
289-3465: MOUNTING GP-TRANSFORMER
289-3465 MOUNTING GP-TRANSFORMER
S/N ZAD1-UP
FOR USE WITH SR4B LOW VOLTAGE
AN ATTACHMENT
S/N ZAD1-UP
FOR USE WITH SR4B LOW VOLTAGE
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SIS#SEBP40470819
290-8068: MOUNTING GP-TRANSFORMER
290-8068 MOUNTING GP-TRANSFORMER
S/N ZAD1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
S/N ZAD1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
Parts for your 3508B GENERATOR SET:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE
Engine News
Operation and Maintenance Manual
Special Instruction
Programming ECM Governor Gain Parameters{1901, 1908}
Programming ECM Governor Gain Parameters{1901, 1908}
Programming ECM Governor Gain Parameters{1901, 1908}
Diagnostic Code Information for Caterpillar <SUP>®</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Systems Operation
100 Hour Free Configuration on Engine Start-up
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
Fuel Rate Scaling (Fuel Correction Factor) - Diesel Fuel
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
ECM Total Fuel Consumption Adjustment - Diesel Fuel
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
Testing and Adjusting
Engine Speed/Timing Sensor - Remove and Install
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
General Information (Electronic Control System)
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
Troubleshooting
ECM Will Not Communicate with Other Systems or Display Modules
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0248 - FMI 09 Cat Data Link not communicating
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0094 - FMI 02 Fuel Pressure misinstalled
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0337 - FMI 02 Incorrect Remote E-Stop Switch inputs
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0094 - FMI 03 Fuel Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0094 - FMI 04 Fuel Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0094 - FMI 13 Fuel Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
Electronic Service Tool Will Not Communicate with ECM
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
E017 High Engine Coolant Temperature Warning
3500B and 3500B High Displacement Generator Set Engines
3500B and 3500B High Displacement Generator Set Engines
Service Magazine
Caterpillar Parts SIS Catalog 3508B :
Truck sale:
175,000
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
175,000
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
175,000
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC




