ELECTRICAL AND STARTING SYSTEM
HARNESS GPWIRING GP
HEATER GP
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP40520890
276-1256: HARNESS AS-WIRING
276-1256 HARNESS AS-WIRING -JUMPER
S/N G4A1-UP; ZAJ1-UP; G3W1-UP; G3Y1-UP
PART OF 255-5437, 255-8888, 383-2973, 398-9317 PANEL GP-ELECTRONIC
AN ATTACHMENT
S/N G4A1-UP; ZAJ1-UP; G3W1-UP; G3Y1-UP
PART OF 255-5437, 255-8888, 383-2973, 398-9317 PANEL GP-ELECTRONIC
AN ATTACHMENT
For full view, you need register
#SEBP40520891
292-2494: HARNESS AS-WIRING
For full view, you need register
#SEBP40520892
388-0386: HARNESS AS-WIRING
388-0386 HARNESS AS-WIRING -ENGINE
S/N ZAJ1-UP
FOR USE WITH WALL MOUNT CONTROL PANEL
AN ATTACHMENT
S/N ZAJ1-UP
FOR USE WITH WALL MOUNT CONTROL PANEL
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 126-1768 | [39] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| -OR- | ||||
| 9X-3402 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(.4-M) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40520893
388-0387: HARNESS AS-WIRING
388-0387 HARNESS AS-WIRING -ENGINE
S/N ZAJ1-UP
FOR USE WITH WALL MOUNT CONTROL PANEL
AN ATTACHMENT
S/N ZAJ1-UP
FOR USE WITH WALL MOUNT CONTROL PANEL
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.4-M) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM) | |||
| 9X-3402 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [39] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40520894
389-9082: HARNESS AS-WIRING
389-9082 HARNESS AS-WIRING -GROUND
S/N ZAJ1-UP
PART OF 383-2973 PANEL GP-ELECTRONIC
FOR USE WITH EMCP 4.3 WALL MOUNT CONTROL PANEL
AN ATTACHMENT
S/N ZAJ1-UP
PART OF 383-2973 PANEL GP-ELECTRONIC
FOR USE WITH EMCP 4.3 WALL MOUNT CONTROL PANEL
AN ATTACHMENT
For full view, you need register
#SEBP40520895
390-2752: HARNESS AS-WIRING
390-2752 HARNESS AS-WIRING -GROUND
S/N ZAJ1-UP
PART OF 278-4895 WIRING GP-GENERATOR
AN ATTACHMENT
S/N ZAJ1-UP
PART OF 278-4895 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 2L-8075 | [6] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40520896
391-5033: HARNESS AS-WIRING
391-5033 HARNESS AS-WIRING -MEDIUM VOLT
S/N ZAJ1-UP
PART OF 252-7427 WIRING GP-GENERATOR
AN ATTACHMENT
S/N ZAJ1-UP
PART OF 252-7427 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 2L-8075 | [6] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40520897
506-5685: HARNESS AS-WIRING
506-5685 HARNESS AS-WIRING
S/N G4A1-UP; G3W1-UP; G3Y1-UP
PART OF 506-5684 WIRING GP-GENERATOR
AN ATTACHMENT
S/N G4A1-UP; G3W1-UP; G3Y1-UP
PART OF 506-5684 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-9187 | [1] | CONNECTOR | ||
| 110-8714 | [17] | END-WIRE (18-GA) | ||
| 113-8961 | [1] | END-WIRE (10-GA) | ||
| 109-3038 | [21] | END-WIRE (16-GA) | ||
| 112-7497 | [2] | END-WIRE (14-GA) | ||
| 366-9370 | [1] | PLUG AS (3-WAY) | ||
| 416-1367 | [1] | CONNECTOR AS | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 416-1334 | [1] | SEAL-WIRE | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 B | [5] | STRAP-CABLE | ||
| 131-1497 | [1] | TERMINAL AS-RING (10-GA TO 12-GA) | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP40520898
245-0032: HARNESS GP-WIRING
245-0032 HARNESS GP-WIRING -INTERCONNECT
S/N ZAJ1-UP
FOR USE WITH MUI
AN ATTACHMENT
S/N ZAJ1-UP
FOR USE WITH MUI
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7581 | [2] | CLIP (LADDER) | |
| 2. | 9X-6772 | [10] | STRAP-CABLE | |
| 3. | 156-6175 | [6] | CLIP (LADDER) | |
| 4. | 244-9635 | [1] | HARNESS AS-WIRING (GENERATOR SET INTERCONNECT) | |
| 6I-4348 | [2] | BOOT (40-PIN) | ||
| 8T-8729 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [23] | PLUG-SEAL | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 8T-8730 | [21] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 5. | 8T-9364 | [3] | BOLT (1/4-20X0.625-IN) | |
| 6. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 7. | 4P-8134 | [2] | CLIP (LADDER) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40520899
200-6504: HEATER GP-JACKET WATER
200-6504 HEATER GP-JACKET WATER
S/N ZAJ1-UP
240-VOLT TO 480-VOLT AC, 6-KILOWATT
Type 1
AN ATTACHMENT
S/N ZAJ1-UP
240-VOLT TO 480-VOLT AC, 6-KILOWATT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 3512B GENERATOR SET:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6260 | [1] | THERMOSTAT AS (20-DEG C TO 80-DEG C)(JACKET WATER HEATER) |
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Caterpillar Parts SIS Catalog 3512B :
Truck sale:
182,189
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
