AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

388-2172 GOVERNOR GP S/N ZAP1-UP AN ATTACHMENT 3516B GENERATOR SET


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION
FUEL SYSTEM GP
LINES GP-FUEL
LINES GP-FUEL INJECTION

GENERATOR SET 3516B GENERATOR SET ZAP
 3516B Generator Set ZAP00001-UP SEBP4057 3516B ZAP   (2005)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
259-5550 GOVERNOR GP
GOVERNOR GP
388-2172 GOVERNOR GP
CONTROL GP-ELECTRONIC GOVERNOR
252-7437 CONTROL GP-ELECTRONIC GOVERNOR
 

#SEBP40570570
 

388-2172: GOVERNOR GP

388-2172 GOVERNOR GP
S/N ZAP1-UP
AN ATTACHMENT
i05031461 SEBP4057
3882172 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4502 [4] LOCKWASHER  
2. 4W-5972 [1] KNOB  
3. 5L-5840 [1] WASHER (9.25X16.92X1.83-MM THK)  
4. 7C-4550 [1] SEAL (ROTATING SHAFT)  
5. 373-9377 [1] POTENTIOMETER AS (ENGINE SPEED CONTROL)  
  5P-6001 D TUBE-HEAT SHRINK (4.75-MM DIA)(0.1-M)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  127-9070 [1] POTENTIOMETER (10,000-OHM)  
6. 388-2171 Y [1] HARNESS AS-PANEL (LOAD SHARE MODULE)  
7. 309-1583 [1] CONTROL AS-GOVERNOR (LOAD SHARE)  
8. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
9. 6V-7978 [4] SCREW-MACHINE (10-32X0.375-IN)  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP40570571
 

392-0217: INJECTOR GP-FUEL

392-0217 INJECTOR GP-FUEL
S/N ZAP1-UP
PART OF 359-9769 KIT-ENGINE OVERHAUL
i05166517 SEBP4057
3920217 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-4907 [1] SEAL-O-RING  
2. 245-4908 [1] SEAL-O-RING  
 

#SEBP40570572
 

398-2069: KIT-FUEL SYSTEM PARTS

398-2069 KIT-FUEL SYSTEM PARTS
S/N ZAP1-UP
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ALL ENGINES FOR BLENDED FUEL CAPABILITY, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
FIELD INSTALLATION
i05188008 SEBP4057
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1585 [1] BOLT (1/2-13X1.5-IN)  
  165-3929 [2] BOLT (3/8-16X1.5-IN)  
  1F-7958 [2] NUT-FULL (1/2-13-THD)  
  4W-0530 [2] RING-RETAINING  
  7D-1649 [5] WASHER-HARD (13.5X32X5-MM THK)  
  8T-1919 [2] SEAL-O-RING  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
  9X-6458 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
  2B-0947 [2] BOLT (1/2-13X2.25-IN)  
  125-2780 [1] TUBE  
  379-5142 [1] BRACKET  
  379-5144 [1] TUBE  
  386-3398 [1] BRACKET  
  390-4498 [1] TUBE  
   
    (ABOVE PARTS ARE PART OF THE 379-5145 TEMPERATURE REGULATOR GROUP)
   
  165-3931 [2] BOLT (3/8-16X1.75-IN)  
  0S-1588 [14] BOLT (3/8-16X1.25-IN)  
  165-3929 [4] BOLT (3/8-16X1.5-IN)  
  0S-1595 [11] BOLT (1/2-13X1.25-IN)  
  0T-0055 [4] BOLT (3/8-16X4.25-IN)  
  2A-4639 [4] BOLT (3/8-16X1.625-IN)  
  5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
  5S-0003 [4] NUT (5/16-18-THD)  
  7D-1649 [11] WASHER-HARD (13.5X32X5-MM THK)  
  7M-1599 [4] STUD-TAPERLOCK  
  7N-6986 [2] SUPPORT  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  9S-8752 [10] NUT-FULL (3/8-16-THD)  
  9X-6458 [22] WASHER-HARD (10.2X22.5X3-MM THK)  
  381-1062 [1] TUBE AS  
  381-1063 [1] TUBE AS  
  386-3396 [2] BRACKET  
  388-2132 [1] BRACKET  
  388-2133 [1] BRACKET  
   
    (ABOVE PARTS ARE PART OF THE 381-5733 AIR CLEANER MOUNTING GROUP)
   
  1A-2029 [40] BOLT (3/8-16X1.125-IN)  
  1C-2251 [8] BOLT (3/8-16X1.87-IN)  
  5L-5840 [8] WASHER (9.25X16.92X1.83-MM THK)  
  5M-2894 [48] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  277-5833 [8] SEAL  
  349-6052 [4] COVER-CAMSHAFT  
  374-1513 [4] COVER-CAMSHAFT  
   
    (ABOVE PARTS ARE PART OF THE 390-2914 CYLINDER BLOCK COVER GROUP)
   
  1A-8537 J [2] BOLT (5/8-11X2.75-IN)  
  2B-0947 J [8] BOLT (1/2-13X2.25-IN)  
  3B-1915 J [2] BOLT (3/8-16X1.375-IN)  
  0S-1585 HJ [10] BOLT (1/2-13X1.5-IN)  
  0S-1591 H [8] BOLT (3/8-16X1.5-IN)  
  3B-1915 H [6] BOLT (3/8-16X1.375-IN)  
  2A-4639 HJ [8] BOLT (3/8-16X1.625-IN)  
  8S-9191 HJ [4] BOLT (3/8-16X4-IN)  
  5B-5620 HJ [3] BOLT (5/16-18X2.125-IN)  
  165-3929 J [10] BOLT (3/8-16X1.5-IN)  
  165-3931 J [2] BOLT (3/8-16X1.75-IN)  
  417-5543 H [1] BRACKET AS  
  440-4786 J [1] BRACKET AS  
  450-3143 J [1] BRACKET AS  
  397-8632 HJ [1] BRACKET  
  397-8629 H [2] BRACKET  
  440-4792 J [1] BRACKET  
  2L-6055 H [1] CAP-PIPE  
  4P-8134 HJ [1] CLIP (LADDER)  
  211-5237 J [1] CONNECTOR  
  293-8396 HJ [1] CORE AS-FUEL COOLER  
  122-8905 H [2] ELBOW (90-DEG)  
  7X-7951 H [3] ELBOW-UNION  
  3B-7296 H [3] FITTING (NIPPLE)  
  6N-4543 H [1] FITTING  
  2M-4108 H [2] GASKET  
  105-8180 HJ [1] GASKET  
  293-4056 J [2] GASKET  
  420-8789 J [2] GASKET  
  425-3549 J [2] GASKET  
  3B-7286 H [1] NIPPLE-PIPE  
  5S-0003 HJ [3] NUT (5/16-18-THD)  
  1F-7958 J [8] NUT-FULL (1/2-13-THD)  
  4K-0367 J [8] NUT-FULL (5/8-11-THD)  
  9S-8752 HJ [10] NUT-FULL (3/8-16-THD)  
  265-5255 H [2] PLATE  
  9X-6138 H [1] PLUG-PIPE  
  210-2007 HY [1] REGULATOR GP-GAS PRESSURE  
  435-0888 J [1] REGULATOR GP-GAS PRESSURE  
  6V-8398 HJ [2] SEAL-O-RING  
  6L-7322 H [1] TEE-PIPE  
  397-8628 H [1] TUBE AS  
  397-8631 H [1] TUBE AS  
  440-4788 J [1] TUBE AS  
  440-4791 J [1] TUBE AS  
  440-4794 J [1] TUBE AS  
  450-2989 J [1] TUBE AS  
  538-8794 HJY [1] VALVE GP-SOLENOID (24-VOLT)  
  419-0893 JY [1] VALVE GP-SOLENOID (24-VOLT)  
  5M-2894 HJ [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-8245 HJ [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  5P-8247 J [16] WASHER-HARD (17X32X3.5-MM THK)  
  9M-1974 HJ [6] WASHER-HARD (8.8X16X2-MM THK)  
  7D-1649 H [2] WASHER-HARD (13.5X32X5-MM THK)  
  7D-1649 J [18] WASHER-HARD (13.5X32X5-MM THK)  
  9X-6458 HJ [16] WASHER-HARD (10.2X22.5X3-MM THK)  
   
    (ABOVE PARTS MARKED H ARE PART OF 397-8633 GAS PRESSURE REGULATOR GROUP)
    (ABOVE PARTS MARKED J ARE PART OF 440-4790 GAS PRESSURE REGULATOR GROUP)
   
  165-3929 NP [6] BOLT (3/8-16X1.5-IN)  
  2A-4639 NP [2] BOLT (3/8-16X1.625-IN)  
  3B-1915 NP [2] BOLT (3/8-16X1.375-IN)  
  5M-2894 NP [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  6V-1581 NP [2] CLIP (SLOT)  
  6V-1582 NP [2] CLIP (TAB)  
  7K-1401 NP [2] CLIP  
  7K-1402 NP [2] BRACKET  
  9S-8752 NP [14] NUT-FULL (3/8-16-THD)  
  9X-6458 NP [16] WASHER-HARD (10.2X22.5X3-MM THK)  
  105-8180 NP [1] GASKET  
  165-3931 NP [2] BOLT (3/8-16X1.75-IN)  
  216-2285 NP [1] JOINT AS-TUBE  
  127-4230 [2] SEAL  
  255-6464 NP [2] JOINT AS  
    (EACH INCLUDES)
  255-6466 [2] SEAL  
  391-2202 NP [1] BRACKET  
  442-5387 N [1] TUBE AS  
  442-5388 N [1] TUBE AS  
  442-5391 NP [1] TUBE AS  
  442-6223 NP [1] BRACKET  
  442-6224 NP [1] BRACKET  
  442-6225 NP [1] BRACKET  
   
    (ABOVE PARTS MARKED N ARE PART OF 442-6982 FUEL LINES GROUP)
    (ABOVE PARTS MARKED P ARE PART OF 442-9594 FUEL LINES GROUP)
   
  5N-2126 [16] CONNECTOR (THERMOCOUPLE)  
  6V-9028 [2] SEAL-O-RING  
  7K-1181 [100] STRAP-CABLE  
  9X-0262 [1] ADAPTER  
  195-2431 [8] SENSOR GP-DETONATION  
  214-7566 [7] SEAL-O-RING  
  214-7568 [2] SEAL-O-RING  
  228-7100 [8] SEAL-O-RING  
  228-7101 [2] SEAL-O-RING  
  238-5080 [8] SEAL-O-RING  
  256-6453 [2] SENSOR-TEMPERATURE (2-PIN)  
  256-6454 [2] SENSOR-TEMPERATURE (2-PIN)  
  261-6847 [2] ADAPTER  
  305-6873 [1] SENSOR GP-PRESSURE  
  320-3060 [4] SENSOR GP-PRESSURE  
  320-3061 [1] SENSOR GP-PRESSURE  
  320-3063 [4] SENSOR GP-PRESSURE  
  330-9739 [1] ADAPTER  
  335-3999 [2] CONNECTOR  
  353-5439 [2] CONNECTOR  
  353-5440 [3] ADAPTER  
  353-5441 [4] ADAPTER-ELBOW  
  356-6453 [4] BRACKET AS  
  461-6632 Y [1] WIRING GP-ENGINE  
  383-2990 [16] SENSOR GP-TEMPERATURE (THERMOCOUPLE)  
  415-2432 [2] SENSOR GP-TEMPERATURE (EXHAUST)  
   
    (ABOVE PARTS ARE PART OF THE 376-4892 ENGINE WIRING GROUP)
   
  0T-0065 [4] BOLT (3/8-16X3.5-IN)  
  1B-9575 [4] BOLT (5/16-18X1.56-IN)  
  6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
  8T-9655 [8] MOUNT-ISOLATION  
  9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
  9X-6458 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
  155-0576 [8] MOUNT-ISOLATION  
  190-4885 [4] SPACER (11X22X50-MM THK)  
  231-7070 [1] BRACKET  
  353-8089 Y [1] CONTROL GP-UNPROGRAMMED  
  488-4875 [1] CONTROL GP-UNPROGRAMMED  
   
    (ABOVE PARTS ARE PART OF THE 373-1527 ELECTRONIC CONTROL & MOUNTING GROUP)
   
  381-3558 [2] TUBE AS  
   
    (ABOVE PARTS ARE PART OF THE 399-3107 FUEL MIXER GROUP)
   
  165-3931 [1] BOLT (3/8-16X1.75-IN)  
  0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  0S-1594 [1] BOLT (3/8-16X1-IN)  
  1L-4031 [1] TEE-SERVICE  
  3B-7749 [1] NIPPLE-PIPE  
  4B-9030 [1] ELBOW  
  4F-7391 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  4L-6454 [1] BOLT (3/8-16X1-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-4869 [8] CLAMP-HOSE  
  5P-9297 [1] CLIP (LOOP)  
  6B-1628 [1] BUSHING-REDUCER  
  6V-0267 [1] CLIP (TAB)  
  6V-0268 [1] CLIP (SLOT)  
  6V-3265 [1] CLIP  
  6V-8397 [1] SEAL-O-RING  
  8C-6866 [1] CONNECTOR  
  8C-6867 [1] CONNECTOR  
  8C-6870 [1] CONNECTOR  
  8N-8741 [4] HOSE  
  8S-9191 [1] BOLT (3/8-16X4-IN)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
  9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
  006-5707 [1] ELBOW-PIPE  
  204-6707 [1] REGULATOR-WATER TEMPERATURE (129-DEG F)  
  196-9420 [1] VALVE-BALL  
  265-5254 [1] PLATE  
  318-2484 [1] ORIFICE  
  318-2485 [1] GASKET  
  384-7876 [1] BRACKET  
  397-9377 [1] BRACKET  
  397-9378 I [1] HOSE AS  
  397-9379 I [1] HOSE AS  
  3S-9643 [2] SEAL-LIP TYPE  
  6V-1454 [2] SEAL-O-RING  
   
    (ABOVE PARTS ARE PART OF THE 397-9380 WATER LINES GROUP)
   
  3B-1915 [8] BOLT (3/8-16X1.375-IN)  
  4L-7547 [24] STUD-TAPERLOCK (5/16-18X2-IN)  
  5P-0600 [2] CLAMP-HOSE  
  5S-0003 [24] NUT (5/16-18-THD)  
  7E-8224 [2] HOSE-REDUCER  
  9M-1974 [24] WASHER-HARD (8.8X16X2-MM THK)  
  113-1323 [2] GASKET  
  388-2134 [4] BRACKET  
   
    (ABOVE PARTS ARE PART OF THE 389-0847 AIR SHUTOFF GROUP)
   
  5P-4869 [8] CLAMP-HOSE  
  8N-8741 [4] HOSE  
  113-1323 [2] GASKET  
   
    (ABOVE PARTS ARE PART OF THE 391-3078 AIR LINES GROUP)
   
  165-3929 [8] BOLT (3/8-16X1.5-IN)  
  0S-1592 [12] BOLT (5/8-11X1.25-IN)  
  1A-1460 [2] BOLT (1/2-13X2-IN)  
  1F-7958 [2] NUT-FULL (1/2-13-THD)  
  2H-3743 [4] BOLT (1-14X2-IN)  
  2S-7593 [12] WASHER-HARD (17X35X5-MM THK)  
  4M-6425 [64] BOLT (5/16-18X1-IN)  
  5P-8250 [4] WASHER (28X49X5-MM THK)  
  7D-1649 [4] WASHER-HARD (13.5X32X5-MM THK)  
  8T-4224 [128] WASHER-HARD (8.8X16X2-MM THK)  
  9X-6458 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
  031-4155 [64] LOCKNUT (5/16-18-THD)  
  111-5145 [4] CLAMP-HOSE  
  116-8001 [2] GASKET  
  382-5499 [1] BRACKET AS-SUPPORT (LH)  
  382-5500 [1] BRACKET AS-SUPPORT (RH)  
  383-2762 [2] ADAPTER AS  
  386-3397 [2] BRACKET  
  3S-9643 [2] SEAL-LIP TYPE  
  6V-1454 [2] SEAL-O-RING  
   
    (ABOVE PARTS ARE PART OF THE 391-3080 PRECLEANER GROUP)
   
  424-7719 Y [1] ACTUATOR GP-ELECTRONIC  
  H   PARTS MARKED H FOR USE WITH PIPE THREADS
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PARTS MARKED J FOR USE WITHOUT PIPE THREADS
  N   PARTS MARKED N FOR USE WITH PIPE THREADS
  P   PARKS MARKED P FOR USE WITHOUT PIPE THREADS
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP40570573
 

416-4348: KIT-FUEL SYSTEM PARTS

416-4348 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
S/N ZAP1-UP
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINE WITHOUT AIR SHUTOFF, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
FIELD INSTALLATION
i05188012 SEBP4057
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4869 [8] CLAMP-HOSE  
  8N-8741 [4] HOSE  
  113-1328 [2] TUBE  
 

#SEBP40570574
 

416-4349: KIT-FUEL SYSTEM PARTS

416-4349 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
S/N ZAP1-UP
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH AIR SHUTOFF AND NO PRE-CLEANER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
FIELD INSTALLATION
i05188011 SEBP4057
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-1915 N [8] BOLT (3/8-16X1.375-IN)  
  388-2134 N [4] BRACKET  
  5P-0600 N [2] CLAMP-HOSE  
  113-1323 N [2] GASKET  
  7E-8224 N [2] HOSE-REDUCER  
  5S-0003 N [24] NUT (5/16-18-THD)  
  4L-7547 N [24] STUD-TAPERLOCK (5/16-18X2-IN)  
  9M-1974 N [24] WASHER-HARD (8.8X16X2-MM THK)  
  5M-2894 N [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  N   PARTS MARKED N FOR USE WITH AIR SHUT OFF GROUP
 

#SEBP40570575
 

417-4386: KIT-FUEL SYSTEM PARTS

417-4386 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
S/N ZAP1-UP
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH A FUEL HEATER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
FIELD INSTALLATION
i05188010 SEBP4057
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  397-9378 I [4] HOSE AS  
  397-9379 I [1] HOSE AS  
  307-8764 I [1] HOSE AS  
  307-9372 I [1] HOSE AS  
   
  0S-1588 [3] BOLT (3/8-16X1.25-IN)  
  1A-1460 [3] BOLT (1/2-13X2-IN)  
  1B-2790 [2] BOLT (5/16-18X1.375-IN)  
  1F-7958 [2] NUT-FULL (1/2-13-THD)  
  5K-9090 [4] SEAL-O-RING  
  5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  5S-0003 [2] NUT (5/16-18-THD)  
  7D-1649 [4] WASHER-HARD (13.5X32X5-MM THK)  
  7D-4092 [1] CLIP  
  7E-5639 [1] SPACER (13.88X21.34X25-MM THK)  
  7G-1239 [2] SPACER (10.5X19X4.5-MM THK)  
  8C-6875 [4] CONNECTOR  
  8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  118-1656 [1] BUSHING-REDUCER  
  122-3201 [1] NIPPLE-PIPE  
  184-7211 [2] CLIP  
  0S-1594 [2] BOLT (3/8-16X1-IN)  
  4L-6454 [3] BOLT (3/8-16X1-IN)  
  8S-9191 [4] BOLT (3/8-16X4-IN)  
  384-7876 [1] BRACKET  
  397-9377 [2] BRACKET  
  5P-9297 [3] CLIP (LOOP)  
  6V-0267 [2] CLIP (TAB)  
  6V-0268 [3] CLIP (SLOT)  
  6V-3265 [3] CLIP  
  8C-6866 [2] CONNECTOR  
  8C-6867 [1] CONNECTOR  
  8C-6870 [1] CONNECTOR  
  4B-9030 [1] ELBOW  
  006-5707 [1] ELBOW-PIPE  
  318-2485 [1] GASKET  
  9S-8752 [6] NUT-FULL (3/8-16-THD)  
  318-2484 [1] ORIFICE  
  265-5254 [2] PLATE  
  8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
  4F-7391 [1] SEAL-O-RING  
  4J-5477 [2] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  1L-4031 [1] TEE-SERVICE  
  196-9420 [1] VALVE-BALL  
  5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  9X-6458 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP40570576
 

5N-2438: LINES GP-FLEXIBLE FUEL

5N-2438 LINES GP-FLEXIBLE FUEL
S/N ZAP1-UP
AN ATTACHMENT
i00384663 SEBP4057
5N2438 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-6504 I [1] HOSE AS  
2. 8N-1186 I [1] HOSE AS  
3. 5F-5990 B [2] CLIP  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP40570577
 

262-6761: LINES GP-FUEL INJECTION

262-6761 LINES GP-FUEL INJECTION
S/N ZAP1-UP
Type 1
i02208692 SEBP4057
2626761 LINES GP-FUEL INJECTION Parts scheme 2626761 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [16] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 6B-6205 [2] SPACER (0.438X0.875X1.281-IN THK)  
4. 6V-4363 [1] ELBOW  
5. 7C-7677 [16] TUBE AS  
6. 7C-7678 [16] TUBE AS  
7. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
8. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
9. 7E-3921 [1] VALVE-CHECK  
10. 7W-2122 [32] CONNECTOR-PORT  
11. 8N-6210 [1] BRACKET-LINE SUPPORT  
12. 8N-6211 [1] PLATE-LINE SUPPORT  
13. 8N-6326 [1] TUBE AS  
14. 8N-6327 [1] TUBE AS  
15. 9N-4053 [1] SPRING  
16. 030-7977 [1] ELBOW  
17. 111-3388 [1] TUBE AS  
18. 111-3389 [1] TUBE AS  
19. 114-5477 [1] PLUNGER-VALVE  
20. 156-9755 Y [1] MANIFOLD GP-FUEL (RH)  
21. 156-9756 Y [1] MANIFOLD GP-FUEL (LH)  
22. 237-2717 [1] TUBE AS  
23. 030-7949 [3] ELBOW  
24. 030-7972 [1] ELBOW  
25. 0L-2070 [6] BOLT (3/8-16X2.25-IN)  
26. 0S-1594 [1] BOLT (3/8-16X1-IN)  
27. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
28. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
29. 1D-4541 [1] BOLT (5/16-18X3-IN)  
30. 2P-1296 [1] TEE  
31. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
32. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 5P-4900 [1] ELBOW-FLARED  
34. 5S-0003 [1] NUT (5/16-18-THD)  
35. 6V-4589 [9] SEAL-O-RING  
36. 6V-5048 [1] SEAL-O-RING  
37. 6V-5049 [33] SEAL-O-RING  
38. 7K-3377 [2] PIPE  
39. 7N-6806 [4] SEAL-RECTANGULAR  
40. 8L-2786 [1] SEAL-O-RING  
41. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
42. 9M-4584 [2] CONNECTOR  
43. 9S-4182 [1] PLUG (7/16-20-THD)  
44. 9S-4191 [1] PLUG (9/16-18-THD)  
47. 0S-1590 B [2] BOLT (3/8-16X2-IN)  
48. 0T-0065 B [1] BOLT (3/8-16X3.5-IN)  
49. 5M-2894 B [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP40570578
 

262-6761: LINES GP-FUEL INJECTION

262-6761 LINES GP-FUEL INJECTION
S/N ZAP1-UP
PART OF 506-3095, 506-3100 ENGINE AR
Type 2
i02633963 SEBP4057
2626761 LINES GP-FUEL INJECTION Parts scheme 2626761 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [16] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 6B-6205 [2] SPACER (0.438X0.875X1.281-IN THK)  
4. 6V-4363 [1] ELBOW  
5. 7C-7677 [16] TUBE AS  
6. 7C-7678 [16] TUBE AS  
7. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
8. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
9. 7E-3921 [1] VALVE-CHECK  
10. 7W-2122 [32] CONNECTOR-PORT  
11. 8N-6210 [1] BRACKET-LINE SUPPORT  
12. 8N-6211 [1] PLATE-LINE SUPPORT  
13. 8N-6326 [1] TUBE AS  
14. 8N-6327 [1] TUBE AS  
15. 9N-4053 [1] SPRING  
16. 030-7977 [1] ELBOW  
17. 111-3388 [1] TUBE AS  
18. 111-3389 [1] TUBE AS  
19. 114-5477 [1] PLUNGER-VALVE  
20. 156-9755 Y [1] MANIFOLD GP-FUEL (RH)  
21. 156-9756 Y [1] MANIFOLD GP-FUEL (LH)  
22. 237-2717 [1] TUBE AS  
23. 250-1498 C [3] ELBOW AS  
    (EACH INCLUDES)
  250-1497 [1] ELBOW  
  6V-4589 [1] SEAL-O-RING  
24. 030-7972 [1] ELBOW  
25. 0L-2070 [5] BOLT (3/8-16X2.25-IN)  
26. 0S-1594 [1] BOLT (3/8-16X1-IN)  
27. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
28. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
29. 1D-4541 [1] BOLT (5/16-18X3-IN)  
30. 250-1499 [1] TEE  
31. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
32. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 250-1496 C [1] ELBOW  
34. 5S-0003 [1] NUT (5/16-18-THD)  
35. 238-5081 [6] SEAL-O-RING  
36. 214-7566 [1] SEAL-O-RING  
37. 214-7568 [33] SEAL-O-RING  
38. 7K-3377 [2] PIPE  
39. 7N-6806 [4] SEAL-RECTANGULAR  
40. 238-5080 [1] SEAL-O-RING  
41. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
42. 9M-4584 [2] CONNECTOR  
43. 9S-4182 [1] PLUG (7/16-20-THD)  
44. 9S-4191 [1] PLUG (9/16-18-THD)  
47. 0S-1590 B [2] BOLT (3/8-16X2-IN)  
48. 0T-0065 B [1] BOLT (3/8-16X3.5-IN)  
49. 5M-2894 B [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
50. 0S-1590 [1] BOLT (3/8-16X2-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP40570579
 

9Y-6577: LINES GP-FUEL INJECTION

9Y-6577 LINES GP-FUEL INJECTION
S/N ZAP1-99999
i01211382 SEBP4057
9Y6577 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7537 [1] TUBE AS  
2. 4P-0692 [16] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
3. 4P-0693 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
4. 6B-6205 [1] SPACER (0.438X0.875X1.281-IN THK)  
5. 6V-4363 [1] ELBOW  
6. 7C-7677 [16] TUBE AS  
7. 7C-7678 [16] TUBE AS  
8. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
9. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
10. 7E-3921 [1] VALVE-CHECK  
11. 7K-3377 [3] PIPE  
12. 7N-6806 [4] SEAL-RECTANGULAR  
13. 7P-8672 [1] PLATE  
14. 7W-2122 [32] CONNECTOR-PORT  
15. 8N-6210 [1] BRACKET-LINE SUPPORT  
16. 8N-6211 [1] PLATE-LINE SUPPORT  
17. 8N-6326 [1] TUBE AS  
18. 8N-6327 [1] TUBE AS  
19. 8N-8293 [1] TUBE AS  
20. 9N-4053 [1] SPRING  
21. 030-7977 [1] ELBOW  
22. 107-0137 [1] TUBE AS  
23. 114-5477 [1] PLUNGER-VALVE  
24. 156-9755 CY [1] MANIFOLD GP-FUEL (RH)  
25. 156-9756 CY [1] MANIFOLD GP-FUEL (LH)  
26. 386-6229 [3] ELBOW AS  
    (EACH INCLUDES)
  238-5081 [1] SEAL-O-RING  
  250-1497 [1] ELBOW  
27. 0L-2070 [5] BOLT (3/8-16X2.25-IN)  
28. 0S-1590 [3] BOLT (3/8-16X2-IN)  
29. 0S-1594 [2] BOLT (3/8-16X1-IN)  
30. 0T-0065 [4] BOLT (3/8-16X3.5-IN)  
31. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
32. 1D-4541 [1] BOLT (5/16-18X3-IN)  
33. 250-1499 [1] TEE  
34. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
35. 5M-2894 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 250-1496 [1] ELBOW  
37. 5S-0003 C [1] NUT (5/16-18-THD)  
38. 238-5081 [6] SEAL-O-RING  
39. 214-7566 [1] SEAL-O-RING  
40. 214-7568 [33] SEAL-O-RING  
41. 238-5080 [1] SEAL-O-RING  
42. 9M-1974 C [3] WASHER-HARD (8.8X16X2-MM THK)  
43. 9M-4584 [2] CONNECTOR  
44. 9S-4182 [1] PLUG (7/16-20-THD)  
45. 9S-4191 [1] PLUG (9/16-18-THD)  
46. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
49. 5S-0003 BC [15] NUT (5/16-18-THD)  
50. 9M-1974 BC [15] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 3516B :

GOVERNOR GP
259-5550 GOVERNOR GP
FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
FILTER GP-FUEL
7W-9743 FILTER GP-FUEL
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL
FILTER GP-FUEL
263-6853 FILTER GP-FUEL
FILTER GP-FUEL
263-6853 FILTER GP-FUEL
FILTER GP-FUEL
263-6853 FILTER GP-FUEL
FILTER GP-FUEL
263-6853 FILTER GP-FUEL
INJECTOR GP-FUEL
392-0217 INJECTOR GP-FUEL
398-2069 KIT-FUEL SYSTEM PARTS
416-4348 KIT-FUEL SYSTEM PARTS
416-4349 KIT-FUEL SYSTEM PARTS
417-4386 KIT-FUEL SYSTEM PARTS
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL INJECTION
262-6761 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
262-6761 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.