AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

269-6164 PLUG GP-ENGINE S/N TXE1430-UP; RSX2138-UP PART OF 227-8353 ENGINE AR, 292-9283, 349-4472 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 730


BASIC ENGINE
CYLINDER BLOCK GP
PAN GP-OIL
PULLEY GP
VALVE MECHANISM GP

EJECTOR TRUCK 730 EJECTOR TRUCK B1W
 730 Ejector Articulated Truck B1W00001-UP (MACHINE) POWERED BY C11 Engine SEBP4097 730 B1W   (2004)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AS
361-4766 CYLINDER BLOCK AS
CYLINDER BLOCK AS
361-4767 CYLINDER BLOCK AS
CYLINDER BLOCK AS
517-1983 CYLINDER BLOCK AS
CYLINDER BLOCK GP
240-7271 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
238-8962 PLUG GP-ENGINE
PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
 

#SEBP40970080
 

269-6164: PLUG GP-ENGINE

269-6164 PLUG GP-ENGINE
S/N TXE1430-UP; RSX2138-UP
PART OF 227-8353 ENGINE AR, 292-9283, 349-4472 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02443220 SEBP4097
2696164 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 315-9859 [1] PLUG AS  
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
2. 353-5125 [1] PLUG AS  
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
3. 353-5126 [1] PLUG AS  
  6V-6609 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
 

#SEBP40970081
 

7E-2313: PLUG GP-OIL PAN

7E-2313 PLUG GP-OIL PAN
S/N CZX4829-UP
PART OF 229-9334 GEAR GP-TRANSFER
FOR USE WITH STAMPED STEEL OIL PAN, 21 LITER OIL PAN
i00400916 SEBP4097
7E2313 PLUG GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 386-6215 [1] PLUG AS  
  118-3619 [1] PLUG-MAGNETIC  
2. 238-5080 [1] SEAL-O-RING  
 

#SEBP40970082
 

123-0789: PULLEY GP-ALTERNATOR

123-0789 PULLEY GP-ALTERNATOR
S/N TXE1430-UP; RSX1-UP
3.34:1 DRIVE RATIO. 57 MM (2.24 IN) DIAMETER PULLEY
PART OF 227-8353 ENGINE AR, 292-9283, 349-4472 ENGINE AR-COMPLETE
FOR USE WITH 190.5 MM (7.5 IN) DIAMETER CRANKSHAFT PULLEY, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY
ALSO AN ATTACHMENT
i00513542 SEBP4097
1230789 PULLEY GP-ALTERNATOR Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-0790 [1] PULLEY (8-GROOVE)(ALTERNATOR)  
 

#SEBP40970083
 

230-7168: PULLEY GP-CRANKSHAFT

230-7168 PULLEY GP-CRANKSHAFT
S/N TXE1430-UP; RSX1-UP
PART OF 227-8353 ENGINE AR, 292-9283, 349-4472 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02088076 SEBP4097
2307168 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-7167 [1] PULLEY (8-GROOVE)(CRANKSHAFT)  
 

#SEBP40970084
 

240-8461: ROCKER ARM GP

240-8461 ROCKER ARM GP -INLET
S/N RSX1-5663
PART OF 241-0835 ROCKER ARM GP
i02121369 SEBP4097
2408461 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4365 M [1] SCREW-ADJUSTMENT (M10X1.5-THD)  
2. 2Y-5829 M [1] NUT (M10X1.5-THD)  
3. 240-8460 [1] ROCKER ARM AS (INLET)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP40970085
 

240-8463: ROCKER ARM GP

240-8463 ROCKER ARM GP -EXHAUST
S/N RSX1-5663
PART OF 241-0835 ROCKER ARM GP
i02121424 SEBP4097
2408463 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4365 M [1] SCREW-ADJUSTMENT (M10X1.5-THD)  
2. 240-8462 [1] ROCKER ARM AS (EXHAUST)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP40970086
 

241-0835: ROCKER ARM GP

241-0835 ROCKER ARM GP
S/N RSX1-5663
PART OF 240-7272 VALVE MECHANISM GP
i02177064 SEBP4097
2410835 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 242-7418 [1] BASE  
2. 242-1401 [2] BASE AS  
3. 224-4418 [1] SHAFT AS  
  3S-6605 [2] PLUG-CUP  
4. 241-0845 CY [2] ROCKER ARM GP (UNIT INJECTOR)  
5. 240-8461 Y [2] ROCKER ARM GP (INLET)  
6. 240-8463 Y [2] ROCKER ARM GP (EXHAUST)  
7. 241-0847 M [2] BOLT (M12X1.75X93-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP40970087
 

241-0845: ROCKER ARM GP

241-0845 ROCKER ARM GP -UNIT INJECTOR
S/N RSX1-5663
PART OF 241-0835 ROCKER ARM GP
i02011469 SEBP4097
2410845 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-8721 [1] BUTTON  
2. 229-5279 [1] SCREW-ADJUSTMENT  
3. 241-0844 [1] ROCKER ARM AS (UNIT INJECTOR)  
  2D-6642 [2] BALL  
4. 8L-2777 [1] SEAL-O-RING  
5. 245-6095 [1] NUT-HEX THIN (M12X1.5-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP40970088
 

260-0251: ROCKER ARM GP

260-0251 ROCKER ARM GP -UNIT INJECTOR
S/N TXE1430-UP; RSX5664-UP
PART OF 260-0252, 396-4102 ROCKER ARM GP
ALSO AN ATTACHMENT
i02343172 SEBP4097
2600251 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-8721 [1] BUTTON  
2. 274-4490 [1] SCREW-ADJUSTMENT  
3. 260-0915 [1] ROCKER ARM AS (UNIT INJECTOR)  
  2D-6642 [1] BALL  
4. 8L-2777 [1] SEAL-O-RING  
5. 245-6095 [1] NUT-HEX THIN (M12X1.5-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP40970089
 

260-0252: ROCKER ARM GP

260-0252 ROCKER ARM GP
S/N RSX5664-UP
PART OF 240-7272 VALVE MECHANISM GP
ALSO AN ATTACHMENT
i02343151 SEBP4097
2600252 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 224-4418 [1] SHAFT AS  
1A. 3S-6605 [2] PLUG-CUP  
2. 242-1401 [2] BASE AS  
3. 242-7418 [1] BASE  
4. 260-0251 Y [2] ROCKER ARM GP (UNIT INJECTOR)  
5. 261-2290 Y [2] ROCKER ARM GP (INLET)  
6. 261-2294 Y [2] ROCKER ARM GP (EXHAUST)  
7. 241-0847 M [2] BOLT (M12X1.75X93-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Main Bearings - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C11 and C13 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 730 :

PLUG GP-ENGINE
238-8962 PLUG GP-ENGINE
PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
PISTON & ROD GP
452-9086 PISTON & ROD GP
PISTON & ROD GP
238-2723 PISTON & ROD GP
PISTON & ROD GP
238-2721 PISTON & ROD GP
PISTON & ROD GP
238-2721 PISTON & ROD GP
PLUG GP-OIL PAN
7E-2313 PLUG GP-OIL PAN
PULLEY GP-ALTERNATOR
123-0789 PULLEY GP-ALTERNATOR
PULLEY GP-CRANKSHAFT
230-7168 PULLEY GP-CRANKSHAFT
ROCKER ARM GP
240-8461 ROCKER ARM GP
ROCKER ARM GP
240-8463 ROCKER ARM GP
ROCKER ARM GP
241-0835 ROCKER ARM GP
ROCKER ARM GP
241-0845 ROCKER ARM GP
ROCKER ARM GP
260-0251 ROCKER ARM GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.