188-1408 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER S/N B1W1-UP PART OF 147-6800 AXLE GP-CENTER 730 EJECTOR TRUCK

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

0. 188-1408 DIFFERENTI
1. 282-6918 DIFFERENTI
2. 282-6924 DIFFERENTI
3. 282-6924 DIFFERENTI
4. 282-6924 DIFFERENTI
5. 282-6924 DIFFERENTI
6. 193-4303 DIFFERENTI

DRIVE GP

7. 233-0224 DRIVE GP-P
8. 233-0224 DRIVE GP-P
9. 233-0224 DRIVE GP-P
0. INFORMATION

EJECTOR TRUCK 730 EJECTOR TRUCK B1W
730 Ejector Articulated Truck B1W00001-UP (MACHINE) POWERED BY C11 Engine SEBP4097 730 B1W (2004)

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

369-1019 CARRIER GP-DIFFERENTIAL

147-7380 DIFFERENTIAL & BEVEL GEAR GP

188-1408 DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP

#SEBP40970430

188-1408: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

188-1408 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1W1-UP
PART OF 147-6800 AXLE GP-CENTER

i01473190 SEBP4097

1881408 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-4693	[1]	CUP-BEARING
2.	1P-4694	[1]	CONE-BEARING
3.	2D-9572	[1]	SEAL-O-RING
4.	3L-9409	[1]	CUP-BEARING
5.	3S-1374	[3]	SPRING
6.	5L-2031	[1]	CUP-BEARING
7.	5P-9505	[1]	CONE-BEARING
8.	6V-3950	[1]	CONE-BEARING
9.	7T-8858	[1]	CONE-BEARING
10.	8H-7801	[1]	CONE-BEARING
11.	8H-7803	[1]	CUP-BEARING
12.	8S-9075	[1]	CONE-BEARING
13.	8S-9076	[1]	CUP-BEARING
14.	9D-1853	[2]	RETAINER
15.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
16.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
17.	136-6324	[7]	DISC-FRICTION
18.	138-1486	[1]	CAGE-BEARING
19.	138-1487	[1]	RING-ADJUSTMENT
20.	138-1488	[1]	LOCK
21.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
22.	138-1497	[1]	CAGE
23.	138-1504	[1]	PISTON HOUSING
24.	138-3623	[1]	CAGE
25.	138-3624	[1]	RING
26.	138-3626	[1]	LOCK
27.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
28.	138-3638	[1]	HUB
29.	138-4096	[5]	SHIM (0.05-MM THK)
30.	138-4097	[5]	SHIM (0.08-MM THK)
31.	138-4098	[3]	SHIM (0.12-MM THK)
32.	138-4099	[1]	SHIM (0.5-MM THK)
33.	1J-2860	[1]	CUP-BEARING
34.	147-6793	[1]	GEAR SET-BEVEL (40-TEETH)
35.	147-7246	[1]	RETAINER-SEAL
36.	151-8269	[1]	HUB AS
37.	151-8274	[7]	PLATE-CLUTCH
38.	151-8275	[2]	PLATE-CLUTCH
39.	151-8397	[2]	PLATE
40.	152-5464	[1]	GEAR (33-TEETH)
41.	160-8060	[1]	PISTON
42.	162-7183	[1]	SEAL-LIP TYPE
43.	163-1921	[1]	TUBE
44.	168-8410	[1]	GEAR AS (33-TEETH)
45.	176-5445	[1]	SPACER (65.35X95.5X8-MM THK)
46.	188-1002 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
47.	193-4303 CY	[1]	DIFFERENTIAL GP (DRIVE AXLE)
48.	250-7858	[1]	LOCKNUT
49.	217-3252	[1]	BEARING-NEEDLE
50.	224-2323	[1]	BEARING-THRUST
51.	0S-1603	[30]	BOLT (1/2-20X1.5-IN)
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	4J-2506	[2]	SEAL-O-RING
57.	4K-6804	[1]	SEAL-O-RING
58.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
59.	5P-8245	[34]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	6V-5057	[1]	SEAL-O-RING
61.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
62.	7X-7729	[3]	WASHER (11X25X3-MM THK)
63.	8C-3347	[2]	PIN-ROLL
64.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
65.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
66.	9F-1399	[1]	SEAL-O-RING
67.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970431

282-6918: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP
S/N B1W263-UP
PART OF 147-7400 AXLE GP-FRONT, 324-1362, 324-1364 AXLE GP-REAR

i02521242 SEBP4097

2826918 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING
2.	1P-4693	[1]	CUP-BEARING
3.	1P-4694	[1]	CONE-BEARING
4.	3S-1374	[3]	SPRING
5.	5L-2031	[1]	CUP-BEARING
6.	5P-9505	[1]	CONE-BEARING
7.	6V-3950	[1]	CONE-BEARING
8.	8S-9075	[1]	CONE-BEARING
9.	8S-9076	[1]	CUP-BEARING
10.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
11.	136-6324	[7]	DISC-FRICTION
12.	138-1486	[1]	CAGE-BEARING
13.	138-1487	[1]	RING-ADJUSTMENT
14.	138-1488	[1]	LOCK
15.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
16.	138-1504	[1]	PISTON HOUSING
17.	138-3623	[1]	CAGE
18.	138-3624	[1]	RING
19.	138-3626	[1]	LOCK
20.	138-3638	[1]	HUB
21.	138-4096	[5]	SHIM (0.05-MM THK)
	138-4097	[5]	SHIM (0.08-MM THK)
	138-4098	[3]	SHIM (0.12-MM THK)
	138-4099	[1]	SHIM (0.5-MM THK)
25.	369-1018 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, FRONT, REAR)
26.	147-7248	[1]	CAGE
27.	147-7249	[1]	RETAINER-SEAL
28.	151-8274	[7]	PLATE-CLUTCH
29.	151-8275	[1]	PLATE-CLUTCH
30.	151-8397	[2]	PLATE
31.	160-8060	[1]	PISTON
32.	356-1825	[1]	TUBE
34.	486-5000	[1]	NUT
35.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
37.	217-3252	[1]	BEARING-NEEDLE
38.	224-2323	[1]	BEARING-THRUST
39.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
40.	385-4746	[1]	SET-BEVEL GEAR
41.	123-4003	[1]	SEAL-LIP TYPE
42.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
43.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
44.	356-2456	[2]	SEAL-O-RING
45.	4K-6804	[1]	SEAL-O-RING
46.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
47.	175-7904	[1]	SEAL-O-RING
48.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
49.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
50.	7X-7729	[3]	WASHER (11X25X3-MM THK)
51.	8C-3347	[2]	PIN-ROLL
52.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4195 M	[19]	BOLT (M10X1.5X30-MM)
54.	9F-1399	[2]	SEAL-O-RING
55.	5L-4753	[1]	RING-RETAINING
56.	485-9742	[1]	WASHER
57.	485-9743	[1]	WASHER-LOCK
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970432

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1W1-UP
PART OF 147-6800 AXLE GP-CENTER
Type 1

i02521238 SEBP4097

2826924 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER (TAPERED)
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE (BEARING)
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	163-1921	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	188-1002 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	4J-2506	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970433

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1W1-UP
PART OF 147-6800 AXLE GP-CENTER
Type 2

i03016689 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	163-1921	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	317-3021 CY	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	4J-2506	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970434

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1W1-UP
PART OF 147-6800 AXLE GP-CENTER
Type 3

i05368214 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	356-1825 C	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	369-1017 CY	[1]	CARRIER GP-DIFFERENTIAL
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	356-2456 C	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970435

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1W1-UP
PART OF 147-6800 AXLE GP-CENTER
Type 4

i05757250 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	393-1060 C	[1]	RING-RETAINING
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE (BEARING)
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	356-1825	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	369-1017 Y	[1]	CARRIER GP-DIFFERENTIAL
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
	5L-4753	[1]	RING-RETAINING
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	385-4749 C	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	356-2456	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970436

193-4303: DIFFERENTIAL GP

DIFFERENTIAL GP

193-4303 DIFFERENTIAL GP -DRIVE AXLE
S/N B1W1-UP
PART OF 147-7380, 188-1408, 282-6918, 282-6924 DIFFERENTIAL & BEVEL GEAR GP

i01373259 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5V-1274	[1]	SPIDER
2.	8R-1704	[2]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
3.	138-1511	[4]	PINION
4.	138-4112	[4]	WASHER
5.	138-4116	[2]	WASHER-THRUST
6.	448-5622	[1]	CASE AS-DIFFERENTIAL
7.	188-2467	[4]	BUSHING

#SEBP40970437

233-0224: DRIVE GP-PUMP

DRIVE GP-PUMP

233-0224 DRIVE GP-PUMP
S/N JRH1-3808
PART OF 233-0222 TRANSMISSION AR

i02072842 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-5448	[4]	CUP-BEARING
2.	7K-5449	[4]	CONE-BEARING
3.	2K-2939	[2]	SEAL-O-RING
4.	2R-0098	[1]	SEAL-O-RING
5.	4L-4986	[1]	LOCKNUT (7/8-14-THD)
6.	7S-3036	[2]	RING-SEAL
7.	8M-7160	[1]	MAGNET
8.	102-4232	[1]	BEARING AS-ROLLER
9.	129-1609	[1]	SEAL-O-RING
10.	138-3114	[2]	ADAPTER-PUMP
11.	138-3116	[1]	SHAFT-IDLER
12.	139-1536	[1]	FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(TRANSMISSION)
13.	140-2186	[1]	PLATE
14.	140-3133	[1]	PLATE-SEPARATOR
15.	140-7544 B	[2]	SHIM PACK (INCLUDES 12-SHIMS)
16.	140-9494	[1]	TUBE AS
17.	140-9855	[1]	TUBE AS
18.	165-8318	[1]	RETAINER
19.	191-3519	[4]	BOLT-SPECIAL
20.	230-9805	[1]	GEAR-IDLER (65-TEETH)
21.	230-9806	[2]	GEAR-PUMP DRIVE (13-TEETH)
22.	233-3703 Y	[1]	HOUSING GP-TORQUE CONVERTER
23.	234-0380	[1]	COVER-FILTER
24.	234-9566	[1]	STUD-TAPERLOCK
25.	219-0606	[1]	SEAL-LIP TYPE
26.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
27.	148-8407	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
28.	162-0177	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-8004	[1]	PLUG (9/16-18-THD)
29.	164-5619	[1]	PLUG AS
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
30.	2D-8009	[1]	SEAL-O-RING
31.	2H-3931	[1]	SEAL-O-RING
32.	2S-2251	[1]	SEAL-O-RING
33.	3H-1461	[1]	SEAL-O-RING
34.	4P-7429	[1]	CLIP (LADDER)
35.	5F-8000	[1]	SEAL-O-RING
36.	5H-2767	[1]	SEAL-O-RING
37.	5P-7213	[8]	WASHER-HARD (13.5X20.5X2-MM THK)
38.	5P-7530	[1]	SEAL-O-RING
39.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
40.	6F-6673	[1]	SEAL-O-RING
41.	6V-1820 M	[16]	BOLT (M10X1.5X30-MM)
42.	6V-3668 M	[4]	BOLT (M12X1.75X30-MM)
43.	6V-4248 M	[2]	BOLT (M10X1.5X25-MM)
44.	6V-5839	[22]	WASHER (11X21X2.5-MM THK)
45.	8M-5010	[1]	SEAL-O-RING
46.	8T-0207 M	[1]	BOLT (M16X2X100-MM)
47.	8T-3957 M	[8]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
48.	8T-4811	[1]	SEAL-O-RING
49.	215-2900 M	[4]	BOLT (M10X1.5X130-MM)
50.	9X-8268	[5]	WASHER (17.5X30X3.5-MM THK)
51.	148-8406	[1]	PLUG AS
	7M-8485	[1]	SEAL-O-RING
	9S-9334	[1]	PLUG (1-5/16-12-THD)
52.	183-7262	[1]	PLUG AS
	2S-4078	[1]	SEAL-O-RING
	9S-8010	[1]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970438

233-0224: DRIVE GP-PUMP

DRIVE GP-PUMP

233-0224 DRIVE GP-PUMP
S/N JRH3809-5444
PART OF 233-0222 TRANSMISSION AR

i02640862 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-5448	[4]	CUP-BEARING
2.	7K-5449	[4]	CONE-BEARING
3.	2K-2939	[2]	SEAL-O-RING
4.	2R-0098	[1]	SEAL-O-RING
5.	4L-4986	[1]	LOCKNUT (7/8-14-THD)
6.	7S-3036	[2]	RING-SEAL
7.	8M-7160	[1]	MAGNET
8.	102-4232	[1]	BEARING AS-ROLLER
9.	129-1609	[1]	SEAL-O-RING
10.	138-3114	[2]	ADAPTER-PUMP
11.	138-3116	[1]	SHAFT-IDLER
12.	139-1536	[1]	FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(TRANSMISSION)
13.	140-2186	[1]	PLATE
14.	140-3133	[1]	PLATE-SEPARATOR
15.	140-7544 B	[2]	SHIM PACK (INCLUDES 12-SHIMS)
16.	140-9494	[1]	TUBE AS
17.	140-9855	[1]	TUBE AS
18.	165-8318	[1]	RETAINER
19.	191-3519	[4]	BOLT-SPECIAL
20.	230-9805	[1]	GEAR-IDLER (65-TEETH)
21.	230-9806	[2]	GEAR-PUMP DRIVE (13-TEETH)
22.	283-9727 CY	[1]	HOUSING GP-TORQUE CONVERTER
23.	234-0380	[1]	COVER-FILTER
24.	234-9566	[1]	STUD-TAPERLOCK
25.	219-0606	[1]	SEAL-LIP TYPE
26.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
27.	148-8407	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
28.	162-0177	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-8004	[1]	PLUG (9/16-18-THD)
29.	164-5619	[1]	PLUG AS
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
30.	2D-8009	[1]	SEAL-O-RING
31.	2H-3931	[1]	SEAL-O-RING
32.	2S-2251	[1]	SEAL-O-RING
33.	3H-1461	[1]	SEAL-O-RING
34.	4P-7429	[1]	CLIP (LADDER)
35.	5F-8000 C	[2]	SEAL-O-RING
36.	5H-2767	[1]	SEAL-O-RING
37.	5P-7213	[8]	WASHER-HARD (13.5X20.5X2-MM THK)
38.	5P-7530	[1]	SEAL-O-RING
39.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
41.	6V-1820 M	[16]	BOLT (M10X1.5X30-MM)
42.	6V-3668 M	[4]	BOLT (M12X1.75X30-MM)
43.	6V-4248 M	[2]	BOLT (M10X1.5X25-MM)
44.	6V-5839	[22]	WASHER (11X21X2.5-MM THK)
45.	8M-5010	[1]	SEAL-O-RING
46.	8T-0207 M	[1]	BOLT (M16X2X100-MM)
47.	8T-3957 M	[8]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
48.	8T-4811	[1]	SEAL-O-RING
49.	215-2900 M	[4]	BOLT (M10X1.5X130-MM)
50.	9X-8268	[5]	WASHER (17.5X30X3.5-MM THK)
52.	183-7262	[1]	PLUG AS
	2S-4078	[1]	SEAL-O-RING
	9S-8010	[1]	PLUG
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP40970439

233-0224: DRIVE GP-PUMP

DRIVE GP-PUMP

233-0224 DRIVE GP-PUMP
S/N JRH5445-UP; KYP1-UP
PART OF 233-0222, 369-3543 TRANSMISSION AR

i03417460 SEBP4097

For full view, you need register

Parts for your 730 EJECTOR TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-5448	[4]	CUP-BEARING
2.	7K-5449	[4]	CONE-BEARING
3.	2K-2939	[2]	SEAL-O-RING
4.	2R-0098	[1]	SEAL-O-RING
5.	4L-4986	[1]	LOCKNUT (7/8-14-THD)
6.	7S-3036	[2]	RING-SEAL
7.	8M-7160	[1]	MAGNET
8.	102-4232	[1]	BEARING AS-ROLLER
9.	129-1609	[1]	SEAL-O-RING
10.	138-3114	[2]	ADAPTER-PUMP
11.	138-3116	[1]	SHAFT-IDLER
12.	139-1536	[1]	FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)
13.	140-2186	[1]	PLATE
14.	140-3133	[1]	PLATE-SEPARATOR
15.	140-7544 B	[2]	SHIM PACK (INCLUDES 12-SHIMS)
16.	140-9494	[1]	TUBE AS
17.	140-9855	[1]	TUBE AS
18.	165-8318	[1]	RETAINER
19.	191-3519	[4]	BOLT-SPECIAL
20.	230-9805	[1]	GEAR-IDLER (65-TEETH)
21.	230-9806	[2]	GEAR-PUMP DRIVE (13-TEETH)
22.	283-9727 Y	[1]	HOUSING GP-TORQUE CONVERTER
23.	325-5734 C	[1]	COVER-FILTER
24.	234-9566	[1]	STUD-TAPERLOCK
25.	219-0606	[1]	SEAL-LIP TYPE
26.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
27.	148-8407	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
28.	162-0177	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-8004	[1]	PLUG (9/16-18-THD)
29.	164-5619	[1]	PLUG AS
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
30.	324-0891 C	[1]	SEAL-INTEGRAL
31.	6V-1196	[1]	SEAL-O-RING
32.	2S-2251	[1]	SEAL-O-RING
33.	5P-4268	[1]	SEAL-O-RING
34.	4P-7429	[1]	CLIP (LADDER)
35.	5P-8211	[2]	SEAL-O-RING
36.	6V-3683	[1]	SEAL-O-RING
37.	5P-7213	[8]	WASHER-HARD (13.5X20.5X2-MM THK)
38.	5P-7530	[1]	SEAL-O-RING
39.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
41.	6V-1820 M	[16]	BOLT (M10X1.5X30-MM)
42.	6V-3668 M	[4]	BOLT (M12X1.75X30-MM)
43.	6V-4248 M	[2]	BOLT (M10X1.5X25-MM)
44.	6V-5839	[22]	WASHER (11X21X2.5-MM THK)
45.	8M-5010	[1]	SEAL-O-RING
46.	8T-0207 M	[1]	BOLT (M16X2X100-MM)
47.	8T-3957 M	[8]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
48.	448-8275	[1]	SEAL-O-RING
49.	215-2900 M	[4]	BOLT (M10X1.5X130-MM)
50.	9X-8268	[5]	WASHER (17.5X30X3.5-MM THK)
52.	183-7262	[1]	PLUG AS
	2S-4078	[1]	SEAL-O-RING
	9S-8010	[1]	PLUG
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

Operation and Maintenance Manual

Differential and Final Drive Oil - Change
730 EJECTOR Articulated Truck

Differential and Final Drive Oil Sample - Obtain
730 EJECTOR Articulated Truck

Differential and Final Drive Oil Level - Check
730 EJECTOR Articulated Truck

Special Instruction

Pinning the Dowels on the Hub for Locking the Differential{3256, 3258}
Pinning the Dowels on the Hub for Locking the Differential{3256, 3258}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 730 and 730 Ejector ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 730 and 730 Ejector ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING TRUCKS FOR 314-9342 BEARING FAILURES ON CERTAIN 725, 725 OEM, 730, 730 OEM AND 730EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING TRUCKS FOR 314-9342 BEARING FAILURES ON CERTAIN 725, 725 OEM, 730, 730 OEM AND 730EJ ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly
700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly

700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed
700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed

725, 730, 730 EJECTOR & 735 Articulated Trucks, Pinion Locknut for Field Service
725, 730, 730 EJECTOR & 735 Articulated Trucks, Pinion Locknut for Field Service

Specifications

Differential and Bevel Gear (Center)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Tool Operating Manual

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Service Letter-China

Service Letter-Asia

Systems Operation

Interaxle Differential
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential (Front and Rear Axle)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential (Center Axle)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Reuse And Salvage Guidelines

Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}
Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}

Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}

Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}

Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}

Contamination Control Guidelines

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Letter-APD

Testing and Adjusting

Differential Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Interaxle Differential Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Interaxle Differential - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Disassembly and Assembly

Differential and Bevel Gear (Front and Rear) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Service Magazine

Correct Installation of the New 250-7858 Locknut and 250-7859 Locknut {3256, 3258}
2005/07/04

Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/02/06

Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/01/30

Change to Stackup of the Discs in the Differential and Bevel Gear {3256, 3258}
2006/02/13

Dowels for Servicing the Hub in the Differential Lock Are Available {3256, 3258}
2006/03/20

New Bevel Gear Bolts and Washers Can Improve Reliability in Articulated Trucks {3256, 3258}
2006/08/21

An Improved Hub for the Differential Lock Is Available {3256, 3258}
2006/08/14

New Differentials Are Used {3256, 3278}
2006/09/04

Rebuilt Differential and Bevel Gears Require A Break-In Period {3256, 3258}
2006/09/11

New Locknuts Are Now Used in the Differential {3256, 3258}
2007/02/26

A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
2007/09/10

Improvements Have Been Made to the Yokes of the Differential Pinion {3256, 3258, 3278}
2007/10/08

Improved Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258}
2008/01/28

Improved Differential Carrier for the Center Axle of 725 and 730 Articulated Trucks {3258, 3284}
2008/11/24

An Improved Procedure to Grease the Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258}
2009/06/08

Caterpillar Parts SIS Catalog 730 :

147-7380 DIFFERENTIAL & BEVEL GEAR GP

354-7467 COOLER GP-TRANSMISSION OIL

227-8354 COOLER GP-TRANSMISSION OIL

237-8054 COOLER GP-POWER TRAIN OIL

275-7641 COOLER GP-OIL

369-3545 CONTROL GP-TRANSMISSION HYD

282-6918 DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP

193-4303 DIFFERENTIAL GP

233-0224 DRIVE GP-PUMP