SUSPENSION SYSTEM
FRAME GP-SUSPENSIONSUSPENSION GP
OPERATOR STATION
AIR CONDITIONER GPSUSPENSION SYSTEM
FRAME GP-SUSPENSION
#SEBP40970730
138-1464: FRAME GP-CENTER SUSPENSION
138-1464 FRAME GP-CENTER SUSPENSION
S/N B1W1-UP
PART OF 150-8276 AXLE AR-CENTER
S/N B1W1-UP
PART OF 150-8276 AXLE AR-CENTER
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-0604 M | [4] | BOLT (M24X3X300-MM) | |
| 2. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 3. | 185-2752 | [1] | LINK & BEARING AS | |
| 3A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 156-4503 | [1] | ROD | ||
| 4. | [1] | RING-CLAMP | ||
| 5. | 158-7749 | [1] | BEARING-SPHERICAL | |
| 6. | 174-9955 | [1] | FRAME AS-SUSPENSION | |
| 7. | 176-7459 | [1] | COVER-RUBBER | |
| 8. | 196-8827 | [2] | SEAL | |
| 9. | 197-3120 | [1] | BRACKET-STABILIZER | |
| 10. | 233-6977 | [4] | WASHER-HARD (26X40X8-MM THK) | |
| 11. | 8T-0668 M | [2] | BOLT (M24X3X110-MM) | |
| 12. | 8T-0367 M | [4] | BOLT (M24X3X260-MM) | |
| 13. | 8T-7505 M | [2] | BOLT (M20X2.5X220-MM) | |
| 14. | 8T-0161 M | [2] | BOLT (M20X2.5X240-MM) | |
| 15. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 16. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 17. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 18. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 20. | 8T-6868 M | [6] | BOLT (M12X1.75X80-MM) | |
| 21. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| M | METRIC PART | |||
#SEBP40970731
175-6924: FRAME GP-FRONT SUSPENSION
175-6924 FRAME GP-FRONT SUSPENSION
S/N B1W1-UP
PART OF 150-8243 AXLE AR-FRONT
S/N B1W1-UP
PART OF 150-8243 AXLE AR-FRONT
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-4457 | [1] | BEARING-ALIGNING | |
| 2. | 231-7071 | [4] | BOLT (M24X3X315-MM) | |
| 3. | [1] | PLATE-STABILIZER | ||
| 4. | 175-6926 | [1] | FRAME AS-SUSPENSION | |
| 5. | 176-7187 | [1] | SLEEVE-TAPERED | |
| 6. | 178-7360 | [1] | SEAL-BEARING | |
| 7. | 198-7316 | [1] | WASHER-SPECIAL | |
| 8. | 259-0972 | [1] | COLLAR-RETAINING | |
| 9. | 365-4130 | [1] | LINK & BEARING AS | |
| 9A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 156-1506 | [1] | ROD | ||
| 10. | 172-6459 M | [2] | BOLT (M20X2.5X260-MM) | |
| 11. | 233-6978 | [2] | WASHER-HARD (26X50X8-MM THK) | |
| 12. | 8T-0367 M | [4] | BOLT (M24X3X260-MM) | |
| 13. | 8T-0658 M | [2] | BOLT (M20X2.5X180-MM) | |
| 14. | 5P-8245 | [11] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 16. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 17. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 18. | 6V-5696 M | [3] | BOLT (M12X1.75X80-MM) | |
| 19. | 6V-8336 M | [8] | BOLT (M12X1.75X70-MM) | |
| M | METRIC PART | |||
#SEBP40970732
137-5003: FRAME GP-REAR SUSPENSION
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-0604 M | [4] | BOLT (M24X3X300-MM) | |
| 2. | 185-2753 | [1] | LINK & BEARING AS | |
| 2A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 236-4778 | [1] | ROD (AXLE STABILIZER) | ||
| 3. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 4. | [1] | RING-CLAMP | ||
| 5. | 158-7749 | [1] | BEARING-SPHERICAL | |
| 6. | 192-8765 | [1] | FRAME AS-SUSPENSION | |
| 7. | 197-3120 | [1] | BRACKET-STABILIZER | |
| 8. | 233-6977 | [4] | WASHER-HARD (26X40X8-MM THK) | |
| 9. | 8T-0367 M | [6] | BOLT (M24X3X260-MM) | |
| 10. | 8T-7505 M | [4] | BOLT (M20X2.5X220-MM) | |
| 11. | 7X-0851 M | [2] | NUT (M24X3-THD) | |
| 12. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 13. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 14. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 15. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 17. | 8T-6868 M | [6] | BOLT (M12X1.75X80-MM) | |
| 18. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| M | METRIC PART | |||
#SEBP40970733
137-5004: SUSPENSION GP-REAR EQUALIZER
137-5004 SUSPENSION GP-REAR EQUALIZER
S/N B1W1-UP
PART OF 251-7393 FRAME AR-REAR
S/N B1W1-UP
PART OF 251-7393 FRAME AR-REAR
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-9452 | [6] | PLUG | |
| 2. | 193-2113 | [2] | CAP-END | |
| 3. | 175-3587 | [4] | BUSHING AS | |
| 4. | 195-5789 C | [4] | MOUNT AS | |
| 5. | 219-7364 | [2] | ARM AS | |
| 6. | 8T-4132 M | [16] | NUT (M16X2-THD) | |
| 7. | 8T-4140 M | [16] | BOLT (M16X2X60-MM) | |
| 8. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 9. | 6V-8133 M | [6] | BOLT (M24X3X80-MM) | |
| 10. | 9X-8257 | [32] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP40970734
246-0845: AIR CONDITIONER & MOUNTING GP
246-0845 AIR CONDITIONER & MOUNTING GP
S/N B1W1-196
PART OF 251-7386 CAB AR-ENCLOSED ROPS
S/N B1W1-196
PART OF 251-7386 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 246-0846 Y | [1] | AIR CONDITIONER GP | ||
| S/N B1W1-178 | ||||
| 272-0215 Y | [1] | AIR CONDITIONER GP | ||
| S/N B1W179-196 | ||||
| 185-9464 | [3] | LATCH AS (COMPARTMENT) | ||
| 8Y-6388 | [1] | LOUVER AS-VENT | ||
| 151-5715 | [1] | LOUVER AS-VENT | ||
| 6V-7357 M | [2] | BOLT (M6X1X25-MM) | ||
| 7X-2533 M | [2] | BOLT (M6X1X35-MM) | ||
| 170-5342 | [1] | COVER | ||
| 119-3355 | [1] | FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY) | ||
| -OR- | ||||
| 233-8359 | [1] | FILTER ELEMENT-CAB AIR (ULTRA HIGH EFFICIENCY) | ||
| -OR- | ||||
| 268-6704 | [1] | FILTER ELEMENT-CAB AIR (LOW RESTRICTION) | ||
| 120-3950 | [1] | GASKET | ||
| 170-5337 | [1] | GASKET | ||
| 170-5338 | [2] | GASKET | ||
| 170-5339 | [1] | GASKET | ||
| 170-5340 | [2] | GASKET | ||
| 170-5341 | [1] | GASKET | ||
| 175-7141 M | [8] | NUT-HEX FLANGE (M10X1.5-THD) | ||
| 160-8720 | [1] | PLENUM | ||
| 170-4855 | [1] | PLENUM | ||
| 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | ||
| 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | ||
| 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 8T-7004 M | [8] | STUD-TAPERLOCK (M10X1.5X35-MM) | ||
| 104-5604 | [4] | WASHER (7.2X25X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40970735
281-3097: AIR CONDITIONER & MOUNTING GP
281-3097 AIR CONDITIONER & MOUNTING GP
S/N B1W197-UP
PART OF 251-7386 CAB AR-ENCLOSED ROPS
Type 1
S/N B1W197-UP
PART OF 251-7386 CAB AR-ENCLOSED ROPS
Type 1
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6388 | [1] | LOUVER AS-VENT | |
| 2. | 104-5604 | [4] | WASHER (7.2X25X2-MM THK) | |
| 3. | 120-3950 | [1] | GASKET | |
| 4. | 151-5715 | [1] | LOUVER AS-VENT | |
| 5. | 160-8720 | [1] | PLENUM | |
| 6. | 170-4855 | [1] | PLENUM | |
| 7. | 170-5337 | [1] | GASKET | |
| 8. | 170-5338 | [2] | GASKET | |
| 9. | 170-5339 | [1] | GASKET | |
| 10. | 170-5340 | [2] | GASKET | |
| 11. | 170-5341 | [1] | GASKET | |
| 12. | 170-5342 | [1] | COVER | |
| 13. | 175-7141 M | [6] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 14. | 185-9464 | [3] | LATCH AS (COMPARTMENT) | |
| 15. | 271-9204 Y | [1] | AIR CONDITIONER GP | |
| 16. | 272-0216 | [1] | BRACKET AS | |
| 17. | 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 18. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 19. | 268-6704 | [1] | FILTER ELEMENT-CAB AIR (AIR CONDITIONER) | |
| 20. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 21. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 22. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 23. | 8T-7004 M | [6] | STUD-TAPERLOCK (M10X1.5X35-MM) | |
| 24. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 25. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40970736
281-3097: AIR CONDITIONER & MOUNTING GP
281-3097 AIR CONDITIONER & MOUNTING GP
S/N B1W197-UP
PART OF 251-7386 CAB AR-ENCLOSED ROPS
Type 2
S/N B1W197-UP
PART OF 251-7386 CAB AR-ENCLOSED ROPS
Type 2
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6388 | [1] | LOUVER AS-VENT | |
| 2. | 104-5604 | [4] | WASHER (7.2X25X2-MM THK) | |
| 3. | 120-3950 | [1] | GASKET | |
| 4. | 151-5715 | [1] | LOUVER AS-VENT | |
| 5. | 160-8720 | [1] | PLENUM | |
| 6. | 170-4855 | [1] | PLENUM | |
| 7. | 170-5337 | [1] | GASKET | |
| 8. | 170-5338 | [2] | GASKET | |
| 9. | 170-5339 | [1] | GASKET | |
| 10. | 170-5340 | [2] | GASKET | |
| 11. | 170-5341 | [1] | GASKET | |
| 12. | 170-5342 | [1] | COVER | |
| 13. | 175-7141 M | [6] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 14. | 185-9464 | [3] | LATCH AS (COMPARTMENT) | |
| 15. | 308-9434 CY | [1] | HEATER & AIR CONDITIONER GP | |
| 16. | 272-0216 | [1] | BRACKET AS | |
| 17. | 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 18. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 19. | 268-6704 | [1] | FILTER ELEMENT-CAB AIR (AIR CONDITIONER) | |
| 20. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 21. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 22. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 23. | 8T-7004 M | [6] | STUD-TAPERLOCK (M10X1.5X35-MM) | |
| 24. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 25. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40970737
246-0846: AIR CONDITIONER GP
246-0846 AIR CONDITIONER GP
S/N B1W1-196
PART OF 246-0845 AIR CONDITIONER & MOUNTING GP, 272-0215 AIR CONDITIONER GP
FIELD REPLACEMENT ORDER @@@@@271-9204@@@@@
S/N B1W1-196
PART OF 246-0845 AIR CONDITIONER & MOUNTING GP, 272-0215 AIR CONDITIONER GP
FIELD REPLACEMENT ORDER @@@@@271-9204@@@@@
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0400 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [1] | CLAMP | ||
| 2. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC) | |
| 3. | 3S-2093 | [3] | STRAP-CABLE | |
| 4. | 3T-2511 | [2] | TUBE | |
| 5. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 6. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 7. | 8C-4586 | [2] | CLAMP | |
| 8. | 8P-5141 | [2] | PLATE-ORIFICE | |
| 10. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 11. | 9X-2488 | [2] | CLAMP-HOSE | |
| 12. | 037-4838 | [2] | CLAMP | |
| 13. | 102-0340 | [1] | COVER | |
| 14. | 125-9740 | [1] | RESISTOR | |
| 15. | 131-2639 | [4] | WASHER (3.2X9X0.5-MM THK) | |
| 16. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 17. | 157-2482 | [1] | CASE AS | |
| 18. | [1] | COVER AS | ||
| 19. | [1] | COVER AS | ||
| 20. | [1] | HOUSING AS | ||
| 21. | [1] | COVER | ||
| 22. | [1] | GASKET | ||
| 23. | [1] | PLATE | ||
| 24. | [1] | GASKET | ||
| 25. | [1] | GASKET | ||
| 26. | [1] | GASKET | ||
| 27. | [2] | GASKET | ||
| 28. | 157-2501 | [1] | PAN-DRAIN | |
| 29. | [1] | BRACKET | ||
| 30. | [1] | PLATE AS | ||
| 31. | [1] | GASKET | ||
| 32. | [1] | GASKET | ||
| 33. | [1] | COIL AS-HEATER | ||
| 34. | 157-2523 | [1] | COIL AS-EVAPORATOR | |
| 35. | 316-1927 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 174-8145 | [1] | FILTER ELEMENT-CAB AIR (AIR CONDITIONER) | |
| 37. | 180-9562 | [2] | LATCH AS | |
| 38. | 239-9368 | [1] | RESISTOR AS | |
| 39. | 241-5670 | [1] | VALVE AS-WATER (HEATER) | |
| 40. | 241-7691 | [1] | HARNESS AS-HEATER & AIR COND (POWER) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 41. | 246-7280 | [1] | HARNESS AS-HEATER & AIR COND (WATER IN, WATER OUT) | |
| 5C-9553 M | [2] | BOLT (M6X1X16-MM) | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9P-2300 | [1] | GROMMET | ||
| 6T-6506 | [6] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 103-8134 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| [4] | FLANGE | |||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 42. | 247-8272 | [2] | GASKET | |
| 43. | 247-8274 | [1] | GASKET | |
| 44. | 247-8275 | [1] | GASKET | |
| 45. | 247-8276 | [1] | PLATE AS | |
| 46. | 247-8302 | [10] | RIVET | |
| 47. | 033-7291 | [2] | RIVET-POP | |
| 48. | 129-3178 M | [12] | LOCKNUT (M6X1-THD) | |
| 49. | 247-8273 | [1] | GASKET | |
| 50. | 5C-9553 M | [35] | BOLT (M6X1X16-MM) | |
| 51. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 52. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 53. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 54. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 55. | 8T-4205 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 56. | 136-1953 E | HOSE (14-CM) | ||
| 57. | 6V-2496 D | SEAL (0.5-M) | ||
| 57A. | 6V-2496 D | SEAL (0.15-M) | ||
| 57B. | 6V-2496 D | SEAL (0.4-M EACH) | ||
| 57C. | 6V-2496 D | SEAL (0.25-M EACH) | ||
| 58. | 5P-5908 D | SEAL (0.2-M) | ||
| 59. | 5P-5672 D | SEAL (0.4-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP40970738
271-9204: AIR CONDITIONER GP
271-9204 AIR CONDITIONER GP
S/N B1W197-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
FIELD REPLACEMENT FOR @@@@@246-0846@@@@@
S/N B1W197-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
FIELD REPLACEMENT FOR @@@@@246-0846@@@@@
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC) | |
| 2. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 3. | 134-3518 | [2] | TIE-PUSH MOUNT | |
| 4. | 239-9368 | [1] | RESISTOR AS | |
| 5. | 247-8302 | [8] | RIVET | |
| 6. | 257-5029 | [1] | RESISTOR AS | |
| 7. | 259-3222 | [1] | FILTER ELEMENT-AIR (STANDARD EFFICIENCY)(CAB) | |
| -OR- | ||||
| 266-7765 | [1] | FILTER ELEMENT-AIR (STANDARD EFFICIENCY)(CAB) | ||
| 8. | 275-6656 | [1] | CASE AS | |
| 6V-9632 M | [16] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 165-8718 M | [4] | NUT-WELD (M4X0.7-THD) | ||
| 9. | 275-6658 Y | [1] | PAN GP-DRAIN (AIR CONDITIONER) | |
| 10. | 275-6660 | [1] | HARNESS AS-MOTOR (AIR CONDITIONER) | |
| 2U-4729 | [1] | GROMMET-BLIND | ||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9V-2818 | [1] | GROMMET | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 166-5229 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 065-5071 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 11. | 275-6682 J | [1] | GASKET | |
| 12. | 275-6687 J | [1] | GASKET | |
| 13. | 275-6688 J | [1] | GASKET | |
| 14. | 275-6689 J | [1] | GASKET | |
| 15. | 275-6690 Y | [1] | COIL GP-HEATER | |
| 16. | 275-6697 J | [1] | GASKET | |
| 17. | 275-6699 J | [2] | GASKET | |
| 18. | 275-6701 | [1] | COIL AS-EVAPORATOR | |
| 19. | 275-6702 | [1] | PLATE AS | |
| 20. | 275-6704 J | [2] | GASKET | |
| 21. | 275-6705 J | [1] | GASKET | |
| 22. | 275-6706 | [1] | MOTOR AS-BLOWER (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 23. | 275-6708 | [1] | PLATE | |
| 24. | 275-6709 | [1] | PLATE | |
| 25. | 275-6710 | [1] | RETAINER (PUSH ON) | |
| 26. | 096-4034 M | [1] | BOLT-WING (M6X1X15-MM) | |
| 27. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 28. | 3B-4501 | [2] | LOCKWASHER | |
| 29. | 5C-9553 M | [17] | BOLT (M6X1X16-MM) | |
| 30. | 8C-8514 | [2] | SCREW-MACHINE (8-32X0.375-IN) | |
| 31. | 8T-0337 M | [3] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 32. | 8T-2659 M | [1] | LOCKNUT (M4X0.7-THD) | |
| 33. | 8T-4205 | [18] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 294-8679 J | [1] | KIT-GASKET (AIR CONDITIONER) | ||
| (ALSO INCLUDES ADDITIONAL GASKETS) | ||||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP40970739
271-9204: AIR CONDITIONER GP
271-9204 AIR CONDITIONER GP
S/N B1W197-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 1
FIELD REPLACEMENT FOR @@@@@246-0846@@@@@
S/N B1W197-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 1
FIELD REPLACEMENT FOR @@@@@246-0846@@@@@
For full view, you need register
Parts for your 730 EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC) | |
| 2. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 3. | 134-3518 | [2] | TIE-PUSH MOUNT | |
| 4. | 239-9368 | [1] | RESISTOR AS | |
| 5. | 247-8302 | [8] | RIVET | |
| 6. | 257-5029 | [1] | RESISTOR AS | |
| 7. | 259-3222 | [1] | FILTER ELEMENT-AIR (STANDARD EFFICIENCY) | |
| -OR- | ||||
| 266-7765 | FILTER ELEMENT-AIR (STANDARD EFFICIENCY) | |||
| 8. | 299-4728 C | [1] | CASE AS | |
| 6V-9632 M | [17] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 9X-2032 M | [4] | NUT-WELD (M4X0.7-THD) | ||
| 9. | 275-6658 Y | [1] | PAN GP-DRAIN (AIR CONDITIONER) | |
| 10. | 275-6660 | [1] | HARNESS AS-MOTOR (AIR CONDITIONER) | |
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 065-5071 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 166-5229 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2U-4729 | [1] | GROMMET-BLIND | ||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9V-2818 | [1] | GROMMET | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 275-6682 J | [1] | GASKET | |
| 12. | 275-6687 J | [1] | GASKET | |
| 13. | 275-6688 J | [1] | GASKET | |
| 14. | 275-6689 J | [1] | GASKET | |
| 15. | 275-6690 Y | [1] | COIL GP-HEATER | |
| 16. | 275-6697 J | [1] | GASKET | |
| 17. | 275-6699 J | [2] | GASKET | |
| 18. | 275-6701 | [1] | COIL AS-EVAPORATOR | |
| 19. | 275-6702 | [1] | PLATE AS | |
| 20. | 275-6704 J | [2] | GASKET | |
| 21. | 153-6932 CJ | [1] | GASKET | |
| 22. | 275-6706 | [1] | MOTOR AS-BLOWER (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 23. | 275-6708 | [1] | PLATE | |
| 24. | 275-6709 | [1] | PLATE | |
| 25. | 275-6710 | [1] | RETAINER (PUSH ON) | |
| 26. | 096-4034 M | [1] | BOLT-WING (M6X1X15-MM) | |
| 27. | 096-6166 C | [10] | WASHER-HARD (4.5X9X1-MM THK) | |
| 28. | 3B-4501 | [2] | LOCKWASHER | |
| 29. | 5C-9553 CM | [21] | BOLT (M6X1X16-MM) | |
| 30. | 8C-8514 | [2] | SCREW-MACHINE (8-32X0.375-IN) | |
| 31. | 8T-0337 CM | [10] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 33. | 8T-4205 C | [22] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 292-2905 C | [1] | PLATE AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 M | [8] | NUT-WELD (M4X0.7-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 294-8679 J | [1] | KIT-GASKET (AIR CONDITIONER) | ||
| (INCLUDES ADDITIONAL GASKETS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
SUSPENSION SYSTEM
FRAME GP-SUSPENSION
Operation and Maintenance Manual
Specifications
Disassembly and Assembly
Service Magazine
