AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

283-0774 PRECLEANER GP -CAB AIR S/N B9K1-UP PART OF 275-5230 AIR CLEANER GP ALSO AN ATTACHMENT 24M MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL

MOTOR GRADER 24M MOTOR GRADER B9K
 24M Motor Grader B9K00001-UP (MACHINE) POWERED BY C18 Engine SEBP4105 24M B9K   (2007)

AIR INLET AND EXHAUST SYSTEM

AIR CLEANER GP
AIR CLEANER GP
169-2167 AIR CLEANER GP
AIR CLEANER GP
253-3993 AIR CLEANER GP
AIR CLEANER GP
275-5230 AIR CLEANER GP
AIR CLEANER GP
380-1967 AIR CLEANER GP
AIR CLEANER GP
380-7781 AIR CLEANER GP
AIR CLEANER GP
380-8939 AIR CLEANER GP
MOUNTING GP-AIR CLEANER
375-8400 MOUNTING GP-AIR CLEANER
PRECLEANER GP
283-0774 PRECLEANER GP
 

#SEBP41050210
 

283-0774: PRECLEANER GP

283-0774 PRECLEANER GP -CAB AIR
S/N B9K1-UP
PART OF 275-5230 AIR CLEANER GP
ALSO AN ATTACHMENT
i02761940 SEBP4105
2830774 PRECLEANER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3582 [1] CLAMP-HOSE  
2. 235-0320 [1] CAP AS-AIR CLEANER (PRECLEANER)  
  3E-7404 [1] CLAMP-HOSE  
3. 209-5104 [1] PRESSURIZER AS-CAB  
  385-7511 [1] MOTOR AS-BLOWER (24-VOLT, CAB AIR)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 283-0775 [1] HOSE  
5. 9X-6654 [1] CLAMP-HOSE  
 

#SEBP41050211
 

262-1079: TURBOCHARGER GP

262-1079 TURBOCHARGER GP
S/N TXH1-3930; RHX2054-UP
PROVIDE TURBOCHARGER HARDWARE WITH THE NEW TURBINE HOUSING THAT INCORPORATES 11 MM DIA MOUNTING HOLES. AND 23.5 MM DIA SPOTFACE TO IMPROVE THE TURBOCHARGER TO EXHAUST MANIFOLD BOLTED JOINT. IN ORDER TO MAINTAIN JOINT INTEGRITY UNDER LOAD AND THERMAL CYCLE
PART OF 215-7486, 263-7760, 380-8237 ENGINE AR-COMPLETE
AN ATTACHMENT
i02757870 SEBP4105
2621079 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4295 [1] GASKET (TURBOCHARGER)  
2. 296-7636 Y [1] TURBOCHARGER GP  
3. 2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41050212
 

262-1079: TURBOCHARGER GP

262-1079 TURBOCHARGER GP
S/N TXH3931-UP
PROVIDE TURBOCHARGER HARDWARE WITH THE NEW TURBINE HOUSING THAT INCORPORATES 11 MM DIA MOUNTING HOLES. AND 23.5 MM DIA SPOTFACE TO IMPROVE THE TURBOCHARGER TO EXHAUST MANIFOLD BOLTED JOINT. IN ORDER TO MAINTAIN JOINT INTEGRITY UNDER LOAD AND THERMAL CYCLE
PART OF 263-7760, 380-8237 ENGINE AR-COMPLETE
AN ATTACHMENT
i05179089 SEBP4105
2621079 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4295 [1] GASKET (TURBOCHARGER)  
2. 362-0837 CY [1] TURBOCHARGER GP  
3. 2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41050213
 

296-7636: TURBOCHARGER GP

296-7636 TURBOCHARGER GP
S/N TXH102-3930; RHX2094-UP
PART OF 262-1079 TURBOCHARGER GP
AN ATTACHMENT
i02757872 SEBP4105
2967636 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2038 [1] CLAMP AS-TURBINE  
2. 161-6958 [2] CLIP-HOSE  
3. 161-6963 [2] CLAMP  
4. 268-2960 [1] CLAMP AS (COMPRESSOR)  
5. 301-9278 [1] CARTRIDGE GP-TURBOCHARGER  
6. 115-7087 M [2] BOLT (M6X0.04X10.4-MM)  
7. 242-3360 E HOSE (41-CM)  
8. 258-4524 E SLEEVE (15-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41050214
 

362-0837: TURBOCHARGER GP

362-0837 TURBOCHARGER GP
S/N TXH140-UP; RHX10719-UP
PART OF 262-1079, 396-3321 TURBOCHARGER GP
AN ATTACHMENT
i05171630 SEBP4105
3620837 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2038 [1] CLAMP AS-TURBINE  
2. 161-6958 [2] CLIP-HOSE  
3. 161-6963 [2] CLAMP  
4. 268-2960 [1] CLAMP AS (COMPRESSOR)  
5. 301-9278 [1] CARTRIDGE GP-TURBOCHARGER  
6. 115-7087 M [2] BOLT (M6X0.04X10.4-MM)  
7. 242-3360 E HOSE (48-CM)  
8. 258-4524 E SLEEVE (15-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41050215
 

392-7915: TURBOCHARGER GP

392-7915 TURBOCHARGER GP
S/N B9K1-UP
PART OF 435-4709 KIT-ENGINE
i05290752 SEBP4105
3927915 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-7087 M [2] BOLT (M6X0.04X10.4-MM)  
2. 161-6958 [2] CLIP-HOSE  
3. 161-6963 [2] CLAMP  
4. 2F-0808 [2] SCREW (6X0.25-IN)  
5. 301-9278 [1] CARTRIDGE GP-TURBOCHARGER  
6. 268-2960 [1] CLAMP AS (COMPRESSOR)  
7. 9N-2038 [1] CLAMP AS-TURBINE  
8. 242-3360 E HOSE (48-CM)  
9. 258-4524 E SLEEVE (15-CM)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41050216
 

396-3321: TURBOCHARGER GP

396-3321 TURBOCHARGER GP -FRONT EXHAUST
S/N TXH140-UP; RHX10719-UP
PART OF 263-7760, 370-1706 ENGINE AR-COMPLETE
AN ATTACHMENT
i05182185 SEBP4105
3963321 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-1752 [1] GASKET-TURBOCHARGER  
2. 362-0837 Y [1] TURBOCHARGER GP  
3. 375-2467 M [4] LOCKNUT-FLANGE (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41050217
 

275-7664: FILTER & MTG GP-FUEL

275-7664 FILTER & MTG GP-FUEL
S/N TXH102-UP; RHX2054-99999
PART OF 215-7486, 263-7760 ENGINE AR-COMPLETE
AN ATTACHMENT
i02733508 SEBP4105
2757664 FILTER & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 101-3120 [5] SPACER (10.5X25X20-MM THK)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 275-7663 [1] BRACKET AS  
  7T-1099 [1] LINK  
  8J-6030 [2] NUT-WELD (3/8-16-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
7. 275-7667 Y [1] FILTER GP-FUEL  
8. 005-4173 [1] ELBOW  
9. 0S-1571 [5] BOLT (3/8-16X1.75-IN)  
10. 148-8345 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8638 [1] CONNECTOR  
11. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
12. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
14. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
15. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41050218
 

356-8380: FILTER & MTG GP-FUEL

356-8380 FILTER & MTG GP-FUEL
S/N TXH1-UP; RHX10719-UP
INCLUDES SENSORS AND HARNESS WITH AMPSEAL CONNECTORS
PART OF 263-7760, 370-1706, 380-8237 ENGINE AR-COMPLETE
FOR USE WITH @@@@@357-0530@@@@@
AN ATTACHMENT
i04285877 SEBP4105
3568380 FILTER & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 101-3120 [5] SPACER (10.5X25X20-MM THK)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 275-7663 [1] BRACKET AS  
7. 353-5129 [1] ELBOW AS  
  6V-3251 [1] SEAL-O-RING  
  005-4173 [1] ELBOW  
8. 356-8379 Y [1] FILTER GP-FUEL  
9. 165-3931 [4] BOLT (3/8-16X1.75-IN)  
10. 260-9219 [1] CONNECTOR AS  
  6V-8638 [1] CONNECTOR  
  228-7090 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
11. 309-5131 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
12. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 6V-3964 [6] WASHER-HARD (8.8X25.5X5-MM THK)  
14. 7X-2540 M [2] BOLT (M8X1.25X120-MM)  
15. 8T-6870 M [1] BOLT (M8X1.25X70-MM)  
16. 0S-1590 [1] BOLT (3/8-16X2-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41050219
 

275-7667: FILTER GP-FUEL

275-7667 FILTER GP-FUEL
S/N TXH102-UP; RHX2094-UP
PART OF 275-7664 FILTER & MTG GP-FUEL
AN ATTACHMENT
i02736080 SEBP4105
2757667 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 3S-2093 [1] STRAP-CABLE  
3. 127-0785 [1] ELBOW  
4. 233-6742 Y [1] VALVE GP-CHECK (FUEL)  
5. 234-5013 Y [1] SENSOR GP-TEMPERATURE (FUEL)  
6. 237-9310 [1] BASE AS  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
7. 239-2396 Y [1] SENSOR GP-PRESSURE (FUEL)  
8. 275-1253 Y [1] SWITCH GP-PRESSURE (FUEL FILTER, DIFFERENTIAL)  
9. 312-2688 [1] HARNESS AS-SENSOR (FUEL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
10. 005-4362 [1] ELBOW  
11. 030-8188 [1] CONNECTOR  
12. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
13. 235-3595 [1] ADAPTER  
14. 186-1667 [1] CONNECTOR AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
15. 3P-1932 [1] ADAPTER  
16. 4P-7581 [1] CLIP (LADDER)  
17. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
18. 6V-0852 [1] CAP-DUST  
19. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
20. 6V-5048 [2] SEAL-O-RING  
21. 6V-5049 [1] SEAL-O-RING  
22. 8L-2786 [5] SEAL-O-RING  
23. 8T-2353 [1] ADAPTER  
24. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 9S-8005 [1] PLUG (3/4-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 24M :

MUFFLER GP
382-2773 MUFFLER GP
MUFFLER GP
370-8409 MUFFLER GP
370-8409 MUFFLER GP
MUFFLER GP
253-3994 MUFFLER GP
MOUNTING GP-MUFFLER
275-7668 MOUNTING GP-MUFFLER
MOUNTING GP-AIR CLEANER
375-8400 MOUNTING GP-AIR CLEANER
MANIFOLD GP-EXHAUST
380-8512 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
225-0998 MANIFOLD GP-EXHAUST
TURBOCHARGER GP
262-1079 TURBOCHARGER GP
TURBOCHARGER GP
262-1079 TURBOCHARGER GP
TURBOCHARGER GP
296-7636 TURBOCHARGER GP
TURBOCHARGER GP
362-0837 TURBOCHARGER GP
TURBOCHARGER GP
392-7915 TURBOCHARGER GP
TURBOCHARGER GP
396-3321 TURBOCHARGER GP
FILTER & MTG GP-FUEL
275-7664 FILTER & MTG GP-FUEL
FILTER & MTG GP-FUEL
356-8380 FILTER & MTG GP-FUEL

Truck sale:

2007 CAT 24M
USD $81,263 
2007 CAT 24M

Pfeifer Heavy Machinery B.V.
Groenlo, Gelderland, The Netherlands
2008 CAT 24M
USD $87,414 
2008 CAT 24M

Pfeifer Heavy Machinery B.V.
Groenlo, Gelderland, The Netherlands
CATERPILLAR 24M 2011
$835,326 USD 
CATERPILLAR 24M 2011
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.