POWER TRAIN
CONTROL GP-TRANSMISSION HYDTRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
TANDEM & COVER GP
FILLER GP-POWER TRAIN OIL
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP41050520
273-9199: CONTROL GP-TRANSMISSION HYD
273-9199 CONTROL GP-TRANSMISSION HYD
S/N HKY1-1295
PART OF 267-5245 TRANSMISSION AR
S/N HKY1-1295
PART OF 267-5245 TRANSMISSION AR
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [12] | STRAP-CABLE | |
| 2. | 6V-0852 | [6] | CAP-DUST | |
| 3. | 6D-7889 | [6] | SEAL-O-RING | |
| 4. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 5. | 145-9959 | [1] | BRACKET AS | |
| 6. | 164-5636 | [4] | SPACER | |
| 7. | 231-4779 | [1] | COVER | |
| 8. | 231-4780 | [6] | SLEEVE | |
| 9. | 231-8900 | [1] | TUBE AS | |
| 10. | 232-1293 | [1] | GASKET | |
| 11. | 459-3888 CY | [1] | VALVE GP-MANIFOLD (TRANSMISSION) | |
| 12. | 244-3114 Y | [6] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH) | |
| 13. | 304-5687 | [1] | CONTROL GP-UNPROGRAMMED (TRANSMISSION) | |
| 14. | 277-4264 | [1] | HARNESS AS-TRANSMISSION | |
| 15. | 130-5300 | [5] | CLIP | |
| 16. | 132-5789 | [11] | CLIP (LADDER) | |
| 17. | 164-3651 | [1] | ADAPTER | |
| 18. | 164-6877 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 5P-6718 | [12] | SEAL-O-RING | |
| 21. | 6V-3303 M | [4] | BOLT (M16X2X60-MM) | |
| 22. | 6V-4249 M | [3] | BOLT (M10X1.5X50-MM) | |
| 23. | 6V-5220 M | [4] | BOLT (M8X1.25X65-MM) | |
| 24. | 6V-5839 | [15] | WASHER (11X21X2.5-MM THK) | |
| 25. | 6V-5842 M | [13] | BOLT (M10X1.5X40-MM) | |
| 26. | 7B-1597 | [1] | CLIP | |
| 27. | 7J-0204 | [1] | SEAL-O-RING | |
| 28. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 30. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 31. | 8T-6869 M | [12] | BOLT (M8X1.25X60-MM) | |
| 32. | 8T-9397 | [1] | BOLT (3/4-10X1.25-IN) | |
| 33. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 34. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 36. | 9X-8268 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41050521
273-9199: CONTROL GP-TRANSMISSION HYD
273-9199 CONTROL GP-TRANSMISSION HYD
S/N HKY1296-UP
PART OF 267-5245 TRANSMISSION AR
S/N HKY1296-UP
PART OF 267-5245 TRANSMISSION AR
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [12] | STRAP-CABLE | |
| 2. | 6V-0852 | [6] | CAP-DUST | |
| 3. | 6D-7889 | [6] | SEAL-O-RING | |
| 4. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 5. | 145-9959 | [1] | BRACKET AS | |
| 6. | 164-5636 | [4] | SPACER | |
| 7. | 231-4779 | [1] | COVER | |
| 8. | 231-4780 | [6] | SLEEVE | |
| 9. | 231-8900 | [1] | TUBE AS | |
| 10. | 470-8492 C | [1] | GASKET | |
| 11. | 294-7362 CY | [1] | VALVE GP-MANIFOLD (TRANSMISSION) | |
| 12. | 244-3114 Y | [6] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH) | |
| 13. | 275-8971 | [1] | CONTROL GP-POWER TRAIN | |
| 304-5687 | [1] | CONTROL GP-UNPROGRAMMED (TRANSMISSION) | ||
| 14. | 277-4264 | [1] | HARNESS AS-TRANSMISSION | |
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (220-CM) | |||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 15. | 130-5300 | [5] | CLIP | |
| 16. | 132-5789 | [11] | CLIP (LADDER) | |
| 17. | 164-3651 | [1] | ADAPTER | |
| 18. | 164-6877 C | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 5P-6718 | [12] | SEAL-O-RING | |
| 21. | 6V-3303 M | [4] | BOLT (M16X2X60-MM) | |
| 22. | 6V-4249 M | [3] | BOLT (M10X1.5X50-MM) | |
| 23. | 6V-5220 M | [4] | BOLT (M8X1.25X65-MM) | |
| 24. | 6V-5839 | [15] | WASHER (11X21X2.5-MM THK) | |
| 25. | 6V-5842 M | [13] | BOLT (M10X1.5X40-MM) | |
| 26. | 7B-1597 | [1] | CLIP | |
| 27. | 7J-0204 | [1] | SEAL-O-RING | |
| 28. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 30. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 31. | 8T-6869 M | [12] | BOLT (M8X1.25X60-MM) | |
| 32. | 8T-9397 | [1] | BOLT (3/4-10X1.25-IN) | |
| 33. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 34. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 36. | 9X-8268 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 37. | 6K-9194 C | [1] | ELBOW | |
| 38. | 165-4930 C | [1] | TEE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6M-6853 | [1] | TEE-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41050522
375-4056: CONTROL GP-TRANSMISSION HYD
375-4056 CONTROL GP-TRANSMISSION HYD
S/N B5H1-UP
PART OF 374-2616 TRANSMISSION AR
AN ATTACHMENT
S/N B5H1-UP
PART OF 374-2616 TRANSMISSION AR
AN ATTACHMENT
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 6V-0852 | [6] | CAP-DUST | |
| 3. | 6D-7889 | [6] | SEAL-O-RING | |
| 4. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 5. | 145-9959 | [1] | BRACKET AS | |
| 6. | 164-5636 | [4] | SPACER | |
| 7. | 231-4779 | [1] | COVER | |
| 8. | 231-4780 | [6] | SLEEVE | |
| 9. | 231-8900 | [1] | TUBE AS | |
| 10. | 470-8492 | [1] | GASKET | |
| 11. | 244-3114 Y | [6] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH) | |
| 12. | 275-8971 | [1] | CONTROL GP-POWER TRAIN | |
| 13. | 294-7362 Y | [1] | VALVE GP-MANIFOLD (TRANSMISSION) | |
| 14. | 374-6298 | [1] | HARNESS AS-TRANSMISSION | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (220-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 15. | 375-4057 | [1] | TUBE AS | |
| 16. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 17. | 130-5300 | [6] | CLIP | |
| 18. | 132-5789 | [10] | CLIP (LADDER) | |
| 19. | 164-3651 | [1] | ADAPTER | |
| 20. | 164-6877 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 21. | 165-4930 | [1] | TEE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6M-6853 | [1] | TEE-O-RING | ||
| 22. | 203-2789 | [2] | BRACKET AS | |
| 23. | 3J-1907 | [1] | SEAL-O-RING | |
| 24. | 4P-7581 | [3] | CLIP (LADDER) | |
| 25. | 5P-6718 | [12] | SEAL-O-RING | |
| 26. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 6K-9194 | [1] | ELBOW | |
| 28. | 6V-3303 M | [4] | BOLT (M16X2X60-MM) | |
| 29. | 6V-4249 M | [3] | BOLT (M10X1.5X50-MM) | |
| 30. | 6V-5220 M | [4] | BOLT (M8X1.25X65-MM) | |
| 31. | 6V-5839 | [17] | WASHER (11X21X2.5-MM THK) | |
| 32. | 6V-5842 M | [13] | BOLT (M10X1.5X40-MM) | |
| 33. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 34. | 7B-1597 | [1] | CLIP | |
| 35. | 7J-0204 | [1] | SEAL-O-RING | |
| 36. | 8S-8820 | [1] | CLIP | |
| 37. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 40. | 8T-6869 M | [12] | BOLT (M8X1.25X60-MM) | |
| 41. | 8T-9397 | [1] | BOLT (3/4-10X1.25-IN) | |
| 42. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 43. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 45. | 9X-8268 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41050523
278-9805: COVER GP-SHIPPING
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-1773 | [2] | CAP-CONNECTOR | |
| 3. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 4. | 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | |
| 5. | 0S-1621 | [4] | BOLT (1/2-13X1-IN) | |
| 6. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 7. | 0T-0318 | [8] | BOLT (7/16-14X1-IN) | |
| 8. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
| 9. | 1P-9269 | [1] | COVER | |
| 10. | 1S-3725 | [2] | COVER | |
| 11. | 1S-6595 | [1] | GASKET-OIL SUPPLY | |
| 12. | 2S-4078 | [1] | SEAL-O-RING | |
| 13. | 3F-5792 | [1] | SEAL-O-RING | |
| 14. | 3H-0110 | [1] | COVER | |
| 15. | 3J-3712 | [1] | GASKET | |
| 16. | 5M-3154 | [1] | COVER | |
| 17. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 6A-5591 M | [8] | BOLT (M12X1.75X25-MM) | |
| 19. | 7J-0402 | [1] | COVER | |
| 20. | 8E-7366 | [4] | GASKET | |
| 21. | 8E-7367 | [1] | GASKET | |
| 22. | 8X-6166 | [2] | COVER | |
| 23. | 9S-8010 | [1] | PLUG | |
| 24. | 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 25. | 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 26. | 8T-8737 | [18] | PLUG-SEAL | |
| M | METRIC PART | |||
#SEBP41050524
273-9007: DIFFERENTIAL & BEVEL GEAR GP
273-9007 DIFFERENTIAL & BEVEL GEAR GP
S/N B9K1-UP
PART OF 271-9315 AXLE AR-REAR
S/N B9K1-UP
PART OF 271-9315 AXLE AR-REAR
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-3340 | [1] | SEAL-O-RING | |
| 2. | 358-6693 | [2] | PLATE | |
| 3. | 7I-4999 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 4. | 273-8989 Y | [1] | CARRIER GP-DIFFERENTIAL | |
| 5. | 273-8991 Y | [1] | DIFFERENTIAL GP | |
| 6. | 274-1353 | [1] | TUBE AS | |
| 7. | 275-9422 Y | [1] | PINION GP-DIFFERENTIAL | |
| 8. | 148-8378 | [1] | ELBOW AS | |
| 6V-8724 | [1] | ELBOW | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 9. | 198-4765 | [1] | WASHER-HARD (8.8X20X8-MM THK) | |
| 10. | 4D-0537 | [2] | DOWEL | |
| 11. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6A-5591 M | [2] | BOLT (M12X1.75X25-MM) | |
| 13. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 14. | 7X-2576 M | [20] | BOLT (M24X3X70-MM) | |
| 15. | 8T-4167 | [20] | WASHER-HARD (26X44X4-MM THK) | |
| 16. | 9S-4200 | [1] | CLIP | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41050525
273-8991: DIFFERENTIAL GP
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-7180 | [1] | PISTON | |
| 2. | 2D-9453 | [1] | CONE-BEARING | |
| 3. | 4D-7534 | [4] | BEARING AS-ROLLER | |
| 4. | 4D-7536 | [4] | LOCKNUT | |
| 5. | 4D-7541 | [4] | RETAINER | |
| 6. | 6G-0387 | [6] | DISC | |
| 7. | 6G-6272 | [2] | RING-SEAL | |
| 8. | 7I-4935 | [1] | SPACER (225X387.41X12-MM THK) | |
| 9. | 7I-5006 | [1] | GEAR-DIFFERENTIAL BEVEL (24-TEETH) | |
| 10. | 8W-9150 | [1] | GEAR-DIFFERENTIAL BEVEL (24-TEETH) | |
| 11. | 8W-9151 | [4] | PINION-DIFFERENTIAL (19-TEETH) | |
| 12. | 9D-8799 | [1] | RING | |
| 13. | 9V-9840 | [1] | SPIDER | |
| 14. | 2F-9064 | [4] | NUT (2-1/8-12-THD) | |
| 15. | 116-8238 | [1] | GEAR-BEVEL (51-TEETH) | |
| 16. | 117-0019 | [6] | DISC-FRICTION | |
| 17. | 154-6619 | [2] | WASHER-THRUST (122X220X5-MM THK) | |
| 18. | 273-8993 | [1] | CAGE AS | |
| 2D-6642 | [2] | BALL | ||
| 19. | 273-8995 | [1] | RING-ADJUSTMENT | |
| 20. | 273-8996 | [1] | CAGE-BEARING | |
| 21. | 273-8997 | [1] | RING-ADJUSTMENT | |
| 22. | 273-9001 Y | [1] | HOUSING AS-DIFFERENTIAL | |
| 23. | 277-5805 | [1] | BEARING AS-TAPERED ROLLER | |
| 24. | 2S-1914 | [1] | SEAL-RING | |
| 25. | 6B-4370 | [1] | CUP-BEARING | |
| 26. | 6V-3532 M | [24] | BOLT (M20X2.5X60-MM) | |
| 27. | 7G-9224 | [1] | RING-SEAL | |
| 28. | 8C-7562 M | [8] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 29. | 8T-3282 | [24] | WASHER-HARD (22X35X3.5-MM THK) | |
| 30. | 9G-0333 | [1] | SEAL-RING | |
| 31. | 9X-2609 M | [1] | SETSCREW-SOCKET (M8X1.25X8-MM) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41050526
165-9955: DRIVE GP-FINAL
165-9955 DRIVE GP-FINAL
S/N B9K1-662
QUANTITIES ARE TO SUPPLY BOTH LH AND RH FINAL DRIVES
PART OF 271-9315 AXLE AR-REAR
FIELD REPLACEMENT ORDER @@@@@485-2791@@@@@
S/N B9K1-662
QUANTITIES ARE TO SUPPLY BOTH LH AND RH FINAL DRIVES
PART OF 271-9315 AXLE AR-REAR
FIELD REPLACEMENT ORDER @@@@@485-2791@@@@@
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-7174 | [2] | CARRIER-PLANETARY | |
| 2. | 5D-6296 | [2] | CONE-BEARING | |
| 3. | 5D-6792 | [8] | RING-RETAINING | |
| 4. | 5T-7676 | [8] | RETAINER | |
| 5. | 6Y-4119 | [16] | BEARING-ROLLER | |
| 6. | 7D-2626 | [2] | GEAR-RING (76-TEETH) | |
| 7. | 7I-4874 | [2] | RETAINER | |
| 8. | 508-6742 | [4] | SPROCKET (26-TEETH) | |
| 9. | 331-1147 | [2] | WASHER-THRUST (705.86X784X6.97-MM THK) | |
| 10. | 7I-4997 | [2] | RING-WEAR | |
| 11. | 234-4383 C | [2] | SHAFT | |
| 12. | 7I-5000 | [2] | RING-ADJUSTMENT | |
| 13. | 7I-5001 | [2] | BEARING | |
| 14. | 7I-5003 | [4] | WASHER-THRUST (86.3X115.7X10-MM THK) | |
| 15. | 8S-5141 | [2] | SEAL-LIP TYPE | |
| 16. | 8X-5699 | [8] | SHAFT-PLANETARY | |
| 17. | 214-1121 | [16] | WASHER-THRUST (89.7X146X5.16-MM THK) | |
| 18. | 8X-9564 | [8] | SPACER (97.54X128.95X26.97-MM THK) | |
| 19. | 116-7527 | [2] | HOUSING | |
| 20. | 116-8242 | [2] | RETAINER | |
| 21. | 116-8243 B | [2] | SHIM PACK (INCLUDES 17-SHIMS) | |
| 22. | 116-8244 | [2] | LOCK | |
| 23. | 5R-5927 C | [2] | WASHER (14X65X6-MM THK) | |
| 24. | 148-4467 | [2] | GEAR-SUN (20-TEETH) | |
| 25. | 148-4468 | [8] | GEAR (27-TEETH) | |
| 26. | 156-6398 | [2] | HOUSING | |
| 27. | 165-9951 | [6] | PLATE-RETAINER | |
| 28. | 165-9954 J | [2] | SEAL-LIP TYPE | |
| 29. | 1H-6227 | [2] | SEAL-O-RING | |
| 30. | 3D-8422 | [2] | SEAL-O-RING | |
| 31. | 3K-0360 | [4] | SEAL-O-RING | |
| 32. | 5D-6297 | [2] | CONE-BEARING | |
| 33. | 5D-6298 | [4] | CUP-BEARING | |
| 34. | 5P-8245 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 6V-3668 M | [16] | BOLT (M12X1.75X30-MM) | |
| 36. | 6V-8133 M | [76] | BOLT (M24X3X80-MM) | |
| 37. | 6V-8237 | [76] | WASHER (26X44X4-MM THK) | |
| 38. | 6V-8675 M | [30] | BOLT (M12X1.75X35-MM) | |
| 39. | 5P-2228 C | [2] | BOLT (1/2-13X1-IN) | |
| 40. | 9F-2247 | [2] | PLUG-PIPE | |
| 41. | 9X-2230 | [4] | PLUG-DRAIN (MAGNETIC)(FINAL DRIVE) | |
| 42. | 8T-4200 M | [48] | BOLT (M8X1.25X16-MM) | |
| 43. | 328-9666 | [2] | WASHER-THRUST (705.86X784X6.97-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 165-9948 J | [2] | KIT-SEAL & SLEEVE (FINAL DRIVE) | ||
| (EACH INCLUDES LIP SEAL & WEAR SLEEVE) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP41050527
485-2791: DRIVE GP-FINAL
485-2791 DRIVE GP-FINAL
S/N B9K663-UP
PART OF 271-9315 AXLE AR-REAR
FIELD REPLACEMENT FOR @@@@@165-9955@@@@@
S/N B9K663-UP
PART OF 271-9315 AXLE AR-REAR
FIELD REPLACEMENT FOR @@@@@165-9955@@@@@
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-7174 | [1] | CARRIER-PLANETARY | |
| 2. | 5D-6792 | [4] | RING-RETAINING | |
| 3. | 5T-7676 | [4] | RETAINER | |
| 4. | 7D-2626 | [1] | GEAR-RING (76-TEETH) | |
| 5. | 7I-4874 | [1] | RETAINER | |
| 6. | 7I-5000 | [1] | RING-ADJUSTMENT | |
| 7. | 8X-5699 | [4] | SHAFT-PLANETARY | |
| 8. | 116-7527 | [1] | HOUSING | |
| 9. | 116-8242 | [1] | RETAINER | |
| 10. | 116-8243 B | [1] | SHIM PACK (INCLUDES 17-SHIMS) | |
| 11. | 116-8244 | [1] | LOCK | |
| 12. | 148-4467 | [1] | GEAR-SUN (20-TEETH) | |
| 13. | 148-4468 | [4] | GEAR (27-TEETH) | |
| 14. | 156-6398 | [1] | HOUSING | |
| 15. | 165-9951 | [3] | PLATE-RETAINER | |
| 16. | 165-9954 J | [1] | SEAL-LIP TYPE | |
| 17. | 214-1121 | [8] | WASHER-THRUST (89.7X146X5.16-MM THK) | |
| 18. | 234-4383 | [1] | SHAFT | |
| 19. | 328-9666 | [1] | WASHER-THRUST (705.86X784X6.97-MM THK) | |
| 20. | 442-1944 | [1] | WASHER-THRUST | |
| 21. | 508-6742 | [2] | SPROCKET (26-TEETH) | |
| 22. | 1H-6227 | [1] | SEAL-O-RING | |
| 23. | 3D-8422 | [1] | SEAL-O-RING | |
| 24. | 3K-0360 | [2] | SEAL-O-RING | |
| 25. | 5D-6296 | [1] | CONE-BEARING | |
| 26. | 5D-6297 | [1] | CONE-BEARING | |
| 27. | 5D-6298 | [2] | CUP-BEARING | |
| 28. | 5P-2228 | [1] | BOLT (1/2-13X1-IN) | |
| 29. | 5P-8245 | [15] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 5R-5927 | [1] | WASHER (14X65X6-MM THK) | |
| 31. | 6V-3668 M | [8] | BOLT (M12X1.75X30-MM) | |
| 32. | 6V-8133 M | [38] | BOLT (M24X3X80-MM) | |
| 33. | 6V-8237 | [38] | WASHER (26X44X4-MM THK) | |
| 34. | 6V-8675 M | [15] | BOLT (M12X1.75X35-MM) | |
| 35. | 6Y-4119 | [8] | BEARING-ROLLER | |
| 36. | 7I-4997 | [1] | RING-WEAR | |
| 37. | 7I-5001 | [1] | BEARING | |
| 38. | 7I-5003 | [2] | WASHER-THRUST (86.3X115.7X10-MM THK) | |
| 39. | 8S-5141 | [1] | SEAL-LIP TYPE | |
| 40. | 8T-4200 M | [24] | BOLT (M8X1.25X16-MM) | |
| 41. | 8X-9564 | [4] | SPACER (97.54X128.95X26.97-MM THK) | |
| 42. | 9F-2247 | [1] | PLUG-PIPE | |
| 43. | 9X-2230 | [2] | PLUG-DRAIN (MAGNETIC)(FINAL DRIVE) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 165-9948 J | [2] | KIT-SEAL & SLEEVE | ||
| (EACH INCLUDES WEAR SLEEVE & SEAL) | ||||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP41050528
120-6162: FASTENER GP-TANDEM
For full view, you need register
#SEBP41050529
226-1260: FILLER GP-POWER TRAIN OIL
226-1260 FILLER GP-POWER TRAIN OIL
S/N B9K1-UP
PART OF 259-9204, 366-4372 COMMON AR
S/N B9K1-UP
PART OF 259-9204, 366-4372 COMMON AR
For full view, you need register
Parts for your 24M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 171-4766 | [1] | FILLER AS (POWER TRAIN OIL) | |
| 2. | 271-6766 | [1] | FILLER AS-OIL (POWER TRAIN) | |
| 3. | 273-0272 | [1] | BRACKET AS | |
| 4. | 276-4778 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (POWER TRAIN OIL) | |
| 5. | 281-4103 | [1] | TUBE AS | |
| 6. | 091-0081 | [5] | SPACER (10.5X20X10-MM THK) | |
| 7. | 139-1398 | [2] | CLIP (LOOP) | |
| 8. | 5P-7464 | [1] | CLIP (SLOT) | |
| 9. | 1P-4578 | [2] | FLANGE-HALF | |
| 10. | 1S-6595 | [1] | GASKET-OIL SUPPLY | |
| 11. | 220-3246 | [2] | CLAMP | |
| 12. | 4D-7388 | [1] | CLIP (LOOP) | |
| 13. | 4D-9517 | [1] | CLIP | |
| 14. | 4J-0522 | [1] | SEAL-O-RING | |
| 15. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 16. | 6V-8398 | [1] | SEAL-O-RING | |
| 17. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 19. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 21. | 8T-5360 | [4] | WASHER (12X22.5X2.5-MM THK) | |
| 22. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 23. | 5P-0762 E | HOSE (37-CM) | ||
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 8T-2920 | [1] | GROMMET (27-MM ID) | |
| 26. | 5P-7465 | [1] | CLIP (TAB) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 24M :
Truck sale:
$835,326 USD