AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-6795 VALVE & LINKAGE GP -4-BANK, RH; 2-BANK, LH S/N XZK1-UP PART OF 112-4107 BLADE AR 160H MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK
VALVE GP-COMBINATION

MOTOR GRADER 160H MOTOR GRADER XZK
 160H Motor Grader XZK00001-UP (MACHINE) POWERED BY 3306 Engine SEBP4107 160H XZK   (2006)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
 

#SEBP41070290
 

112-6795: VALVE & LINKAGE GP

112-6795 VALVE & LINKAGE GP -4-BANK, RH; 2-BANK, LH
S/N XZK1-UP
PART OF 112-4107 BLADE AR
i02180520 SEBP4107
1126795 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8672 Y [1] VALVE GP-BANK 2 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
  7H-3641 [12] END-ROD (5/16-24-THD)  
  8X-4276 [6] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [12] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [12] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
39. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
40. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070291
 

115-0804: VALVE & LINKAGE GP

115-0804 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N XZK1-UP
AN ATTACHMENT
i02428545 SEBP4107
1150804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (SCARIFIER)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
6. 8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
7A. 8D-5633 [1] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
22A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6753 [1] KNOB-SCARIFIER  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070292
 

115-0808: VALVE & LINKAGE GP

115-0808 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N XZK1-UP
PART OF 115-1002 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02428912 SEBP4107
1150808 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 101-2457 [1] LEVER (RIPPER)  
45. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070293
 

115-0811: VALVE & LINKAGE GP

115-0811 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N XZK1-UP
AN ATTACHMENT
i02182330 SEBP4107
1150811 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)(LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [2] LEVER (CENTER SHIFT)  
6. 6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [2] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070294
 

104-8672: VALVE GP-BANK 2

104-8672 VALVE GP-BANK 2 -LH
S/N XZK1-UP
PART OF 112-6795 VALVE & LINKAGE GP
i02180469 SEBP4107
1048672 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
6. 111-9321 [2] SPACER  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 101-9346 [1] COVER  
9. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
10. 4J-7533 [1] SEAL-O-RING  
11. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070295
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N XZK1-UP
PART OF 112-6795, 115-0804, 115-0808, 115-0811 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i02180516 SEBP4107
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070296
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N XZK1-UP
PART OF 115-0811 VALVE & LINKAGE GP
AN ATTACHMENT
i02182329 SEBP4107
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070297
 

124-3328: VALVE GP-BANK 5

124-3328 VALVE GP-BANK 5 -LH
S/N XZK1-UP
PART OF 115-0804 VALVE & LINKAGE GP
AN ATTACHMENT
i02428536 SEBP4107
1243328 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 102-8385 [1] MANIFOLD  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0543 Y [1] VALVE GP-CONTROL (SCARIFIER)  
10. 101-9346 [1] COVER  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
13. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070298
 

124-3329: VALVE GP-BANK 5

124-3329 VALVE GP-BANK 5 -LH
S/N XZK1-UP
PART OF 115-0808 VALVE & LINKAGE GP
AN ATTACHMENT
i02431602 SEBP4107
1243329 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 102-8385 [1] MANIFOLD  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41070299
 

9T-5957: VALVE GP-COMBINATION

9T-5957 VALVE GP-COMBINATION
S/N XZK1-UP
PART OF 126-0628 LINES GP-PUMP
i02446282 SEBP4107
9T5957 VALVE GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5935 [1] BODY  
2. 100-6021 Y [1] VALVE GP-RELIEF (STEERING)  
3. 3J-3679 [1] PLUG AS  
  9S-8003 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
4. 3T-8236 [1] SPRING  
5. 6V-5230 M [2] BOLT (M10X1.5X60-MM)  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 3J-1907 [1] SEAL-O-RING  
8. 6V-8647 [2] CONNECTOR  
9. 3J-7354 [2] SEAL-O-RING  
10. 6E-1923 [1] TUBE AS  
11. 4J-5477 [2] SEAL-O-RING  
12. 4T-4935 Y [1] VALVE GP-RELIEF (MAIN)  
13. 8T-8987 [1] ELBOW  
14. 2M-9780 [1] SEAL-O-RING  
15. 1H-0337 [1] VALVE  
16. 9F-6705 [1] SPRING  
17. 9S-4189 [1] PLUG  
18. 6E-1924 [1] SPRING (OUTER)  
19. 6E-1925 [1] SPRING (INNER)  
20. 5M-2057 [1] SEAL-O-RING  
21. 8M-3175 [2] WASHER-HARD (10.2X16X3-MM THK)  
22. 6V-0852 [1] CAP-DUST  
23. 6E-4703 Y [1] VALVE GP-RELIEF (IMPLEMENT SIGNAL)  
24. 3K-0360 [1] SEAL-O-RING  
25. 173-3993 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
27. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)(SIGNAL)  
30. 2S-4078 [1] SEAL-O-RING  
31. 3R-2437 [1] PLUG AS  
  9S-8009 [1] PLUG-O-RING  
  4K-1388 [1] SEAL-O-RING  
32. 6V-8398 [1] SEAL-O-RING  
33. 7X-4776 [2] RING-BACKUP  
34. 183-7263 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
35. 131-8350 Y [1] VALVE GP-PURGE (IMPLEMENT SIGNAL)  
36. 3P-9498 [1] PLUG-ORIFICE  
37. [1] VALVE  
38. 8J-6815 [2] PLUG-ORIFICE  
39. [3] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160H :

UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
260-6502 SWIVEL GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
PUMP GP-PISTON
6E-3136 PUMP GP-PISTON
PUMP & MTG GP-STEERING
8X-2379 PUMP & MTG GP-STEERING
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
VALVE GP-BANK 2
104-8672 VALVE GP-BANK 2
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4
VALVE GP-BANK 4
124-3327 VALVE GP-BANK 4
VALVE GP-BANK 5
124-3328 VALVE GP-BANK 5
VALVE GP-BANK 5
124-3329 VALVE GP-BANK 5

Truck sale:

Caterpillar 160H
 
Caterpillar 160H
- motor graders
WESTERN STATES EQUIPMENT
 
 
Caterpillar 160H, motor graders, Construction


Caterpillar 160H, motorgrader mijnbouw, Bouw
90.000 
Caterpillar 160H, motorgrader mijnbouw, Bouw

WAGNER EQUIPMENT CO
Caterpillar 160H, motorgrader mijnbouw, Bouw
69.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Caterpillar 160H, motorgrader mijnbouw, Bouw
74.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.