AVSPARE.COM
parts catalog

486-6230 CYLINDER HEAD GP S/N TXF5070-UP; MHX11242-UP PART OF 357-6593, 423-9722 ENGINE AR-CORE ALSO AN ATTACHMENT 16M




BASIC ENGINE

CYLINDER HEAD GP
 

#SEBP41080080
 

486-6230: CYLINDER HEAD GP

486-6230 CYLINDER HEAD GP
S/N TXF5070-UP; MHX11242-UP
PART OF 357-6593, 423-9722 ENGINE AR-CORE
ALSO AN ATTACHMENT
i06509020 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-4963 Y [1] FASTENER GP-CYLINDER HEAD  
2. 221-9392 [1] GASKET  
3. 486-6227 Y [1] CYLINDER HEAD GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41080081
 

117-2766: DAMPER GP

117-2766 DAMPER GP
S/N TXF1-UP; MHX1304-UP
PROVIDES A VISCONIC DAMPER, ADAPTER AND FASTENING HARDWARE TO ATTACH THE DAMPER TO THE ADAPTER.
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i00492742 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-0092 [1] ADAPTER  
2. 167-8125 [1] DAMPER AS  
3. 136-4183 M [8] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
4. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  M   METRIC PART
 

#SEBP41080082
 

258-0651: DRIVE GP-ACCESSORY

258-0651 DRIVE GP-ACCESSORY
S/N B9H1-UP
PART OF 285-0103, 349-2556 COMMON AR
i02374591 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 354-0672 [1] PULLEY AS-IDLER  
2. 145-2901 [1] COVER-DUST  
3. 348-7889 [1] BELT-SERPENTINE  
4. 183-5106 Y [1] COMPRESSOR GP-REFRIGERANT  
5. 250-5757 [1] SPACER  
6. 253-3996 [1] PULLEY-ALTERNATOR  
7. 255-1281 M [2] BOLT-FLANGE HEAD (M8X1.25X100-MM)  
8. 454-6131 [1] FILM-INSTRUCTION (BELT ROUTING)  
    (ON INSIDE OF FUEL TANK ENCLOSURE DOOR)
9. 264-7021 [1] GUARD AS-BELT  
  8R-8088 [2] SPACER (11.66X15.88X18-MM THK)  
10. 272-1889 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE)  
11. 302-4537 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
  293-5895 [1] BRACKET  
12. 293-5896 [1] BRACKET  
13. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
14. 7X-7729 [4] WASHER (11X25X3-MM THK)  
15. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
18. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41080083
 

260-1406: DRIVE GP-ACCESSORY

260-1406 DRIVE GP-ACCESSORY
S/N TXF1-UP; MHX1-UP
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02283893 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-9642 [1] PULLEY AS-IDLER (8-GROOVE)  
2. 211-7895 [1] BELT TENSIONER  
3. 222-2899 [1] BRACKET-SUPPORT  
4. 243-1557 [1] BRACKET  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
7. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
8. 6V-5842 M [3] BOLT (M10X1.5X40-MM)  
9. 6V-8149 M [2] NUT (M12X1.75-THD)  
10. 8T-0646 M [2] BOLT (M12X1.75X110-MM)  
11. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4178 M [1] BOLT (M10X1.5X90-MM)  
13. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4222 [1] WASHER-PLATED (11X32X2.5-MM THK)  
  M   METRIC PART
 

#SEBP41080084
 

198-4963: FASTENER GP-CYLINDER HEAD

198-4963 FASTENER GP-CYLINDER HEAD
S/N TXF1-UP; MHX1304-UP
PART OF 240-7679, 305-0618, 331-2478, 356-2069, 486-6230 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i01847611 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 242-1811 M [26] BOLT-CYLINDER HEAD (M16X2X220-MM)  
2. 210-4460 M [8] BOLT (M10X1.5X130-MM)  
3. 2S-5658 [26] WASHER-HARD (17X29X3-MM THK)  
  M   METRIC PART
 

#SEBP41080085
 

117-2771: FASTENER GP-DAMPER & PULLEY

117-2771 FASTENER GP-DAMPER & PULLEY
S/N TXF1-UP; MHX1-UP
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01438373 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-1585 C [1] SPACER (10.5-MM THK)  
2. 8T-0281 M [6] BOLT (M16X2X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP41080086
 

252-6185: FLYWHEEL GP

252-6185 FLYWHEEL GP
S/N TXF1719-5096; MHX1304-UP
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02283881 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2053 M [8] BOLT (M16X2X100-MM)  
2. 252-5188 [1] FLYWHEEL AS  
  256-9651 [1] GEAR-FLYWHEEL (113-TEETH)  
3. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP41080087
 

252-6185: FLYWHEEL GP

252-6185 FLYWHEEL GP
S/N TXF1-UP
PART OF 227-5359 ENGINE AR-COMPLETE
AN ATTACHMENT
i06559053 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2053 M [8] BOLT (M16X2X100-MM)  
2. 417-9596 C [1] FLYWHEEL AS  
  4N-2514 [1] GEAR (113-TEETH)  
3. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP41080088
 

438-9577: FLYWHEEL GP

438-9577 FLYWHEEL GP
S/N TXF5097-UP
PART OF 231-0876 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05436519 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2053 M [8] BOLT (M16X2X100-MM)  
2. 438-9578 [1] FLYWHEEL AS  
2A. 4N-2514 [1] GEAR (113-TEETH)  
3. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP41080089
 

222-3088: GEAR GP-FRONT

222-3088 GEAR GP-FRONT
S/N TXF1-UP; MHX1304-UP
PART OF 231-0877, 267-0009, 286-5804, 301-2265, 357-6593, 359-0362, 423-9722 ENGINE AR-CORE
ALSO AN ATTACHMENT
i01839630 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7851 [1] SHAFT  
2. 218-7270 [1] SHAFT  
3. 222-3902 [1] GEAR AS (64-TEETH)  
  7C-7852 [1] BEARING  
4. 222-3905 [1] GEAR AS (CAMSHAFT IDLER, 71-TEETH)  
  133-7084 [1] BUSHING  
5. 8T-0281 M [1] BOLT (M16X2X80-MM)  
6. 8T-0360 M [1] BOLT (M20X2.5X90-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
Specifications
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head
C11 and C13 Engines
Cylinder Head
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Cylinder Head Valves
C11 and C13 Engines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C11 and C13 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Head - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 16M :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.