249-7319 AIR CLEANER GP S/N B9H722-UP PART OF 349-2556 COMMON AR Type 1 16M MOTOR GRADER

249-7319: AIR CLEANER GP

249-7319 AIR CLEANER GP
S/N B9H722-UP
PART OF 349-2556 COMMON AR
Type 1

Parts for your 16M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	5P-2230	[2]	CLAMP-HOSE
2.	245-3816	[1]	CAP AS-AIR CLEANER
3.	250-0366 Y	[1]	AIR CLEANER GP
4.	349-7118 C	[1]	HOSE
5.	349-7119 C	[1]	HOSE
6.	357-7676 C	[1]	PIPE-EXTENSION
7.	099-3649 M	[2]	BOLT (M8X1.25X40-MM)
8.	3E-7424 C	[1]	CLAMP-HOSE
9.	5P-0599 C	[1]	CLAMP-BAND
10.	5P-3860 C	[1]	CLAMP-HOSE
11.	7X-0613	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
12.	7X-0818 M	[2]	BOLT (M8X1.25X45-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

249-7319: AIR CLEANER GP

AIR CLEANER GP

249-7319 AIR CLEANER GP
S/N B9H722-UP
PART OF 349-2556 COMMON AR
Type 2

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-2230	[2]	CLAMP-HOSE
2.	245-3816	[1]	CAP AS-AIR CLEANER
3.	250-0366 Y	[1]	AIR CLEANER GP
4.	366-8277	[1]	HOSE
5.	349-7119 C	[1]	HOSE
6.	357-7676	[1]	PIPE-EXTENSION
7.	099-3649 CM	[2]	BOLT (M8X1.25X40-MM)
8.	3E-7424	[1]	CLAMP-HOSE
9.	5P-0599 C	[1]	CLAMP-BAND
10.	5P-3860 C	[1]	CLAMP-HOSE
11.	7X-0613	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
12.	7X-0818 CM	[2]	BOLT (M8X1.25X45-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

250-0366: AIR CLEANER GP

AIR CLEANER GP

250-0366 AIR CLEANER GP
S/N B9H1-UP
PART OF 249-7319 AIR CLEANER GP

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	245-3818	[1]	FILTER ELEMENT AS-AIR (PRIMARY)
2.	245-3819	[1]	FILTER ELEMENT AS-AIR (SECONDARY)
3.	246-4617	[2]	BRACKET AS
4.	247-9730	[1]	VALVE AS-CHECK (AIR CLEANER)
5.	262-0569	[1]	COVER AS

257-4323: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

257-4323 CARTRIDGE GP-TURBOCHARGER
S/N TXF1-UP; MHX1-UP
PART OF 248-5352 TURBOCHARGER GP
ALSO AN ATTACHMENT

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	206-8873	[1]	RING-PISTON
2.	239-5893	[2]	BEARING-JOURNAL
3.	211-2261	[1]	BEARING-THRUST
4.	227-2584	[1]	COLLAR-THRUST
5.	239-5871	[1]	RING-SEAL
6.	506-9036	[1]	SPACER-BEARING
7.	206-8875	[4]	BOLT (7.9X12.8X27.9-MM)
8.	206-8868	[1]	SEAL-RING
9.	4P-3818 M	[3]	BOLT (M4X0.7X10-MM)
	M		METRIC PART

353-0281: KIT-TURBOCHARGER GASKET

KIT-TURBOCHARGER GASKET

353-0281 KIT-TURBOCHARGER GASKET
S/N TXF1-UP; MHX1-UP
FOR USE WITH @@@@@231-0876@@@@@
FIELD INSTALLATION

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
274-6851	[1]	GASKET-TURBOCHARGER
9X-6620 M	[4]	LOCKNUT (M10X1.5-THD)
228-7090	[1]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

449-3768: KIT-TURBOCHARGER GASKET

KIT-TURBOCHARGER GASKET

449-3768 KIT-TURBOCHARGER GASKET
S/N B9H1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES THE TURBO MOUNTING HARDWARE
FIELD INSTALLATION

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
274-6851	[1]	GASKET-TURBOCHARGER
9X-6620 M	[4]	LOCKNUT (M10X1.5-THD)
214-7568	[1]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

249-7322: LINES GP-AIR

LINES GP-AIR

249-7322 LINES GP-AIR
S/N B9H1-706
PART OF 285-0103 COMMON AR

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1717	[3]	CLAMP-HOSE
2.	7E-8630	[3]	HOSE-AIR INLET
3.	9R-5008	[2]	SPACER (11X20X6-MM THK)
4.	127-0929	[1]	CLAMP-V BAND
5.	129-6400	[1]	ADAPTER
6.	260-1863	[1]	TUBE
7.	260-1864	[1]	TUBE
8.	263-3989	[1]	SHIELD-HEAT
9.	274-1707	[1]	HOSE
10.	133-9229	[2]	CLIP
11.	208-7448	[6]	CLAMP
12.	216-2211	[2]	CLAMP
13.	298-2011	[1]	SPACER (11X30X30-MM THK)
14.	7X-7729	[2]	WASHER (11X25X3-MM THK)
15.	8C-3089	[1]	SEAL-O-RING
16.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
17.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

249-7322: LINES GP-AIR

LINES GP-AIR

249-7322 LINES GP-AIR
S/N B9H707-UP
PART OF 285-0103, 349-2556 COMMON AR

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-8630	[3]	HOSE-AIR INLET
2.	9R-5008	[2]	SPACER (11X20X6-MM THK)
3.	127-0929	[1]	CLAMP-V BAND
4.	129-6400	[1]	ADAPTER
5.	260-1863	[1]	TUBE
6.	260-1864	[1]	TUBE
7.	274-1707	[1]	HOSE
8.	298-2011	[1]	SPACER (11X30X30-MM THK)
9.	133-9229	[2]	CLIP
10.	346-4791	[8]	CLAMP-BAND
11.	7X-7729	[2]	WASHER (11X25X3-MM THK)
12.	8C-3089	[1]	SEAL-O-RING
13.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
14.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

268-6686: LINES GP-AIR

LINES GP-AIR

268-6686 LINES GP-AIR -INLET
S/N TXF1-UP; MHX1304-UP
PROVIDES REAR FACING AIR INLET ELBOW
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	203-0351	[1]	ELBOW-AIR
2.	248-4840	[1]	CAP-PROTECTIVE
3.	248-4841	[1]	CLAMP-BAND
4.	307-2671	[1]	PLUG AS
4A.	214-7566	[1]	SEAL-O-RING
	9S-8002	[1]	PLUG (7/16-20-THD)

247-2833: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

247-2833 MANIFOLD GP-EXHAUST
S/N TXF1-UP; MHX1-UP
PROVIDES A LOW STRESS FOOT CENTER SECTION
PART OF 227-5359, 231-0876, 349-4462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-4369	[12]	SPACER (12X19X23.5-MM THK)
2.	283-2238	[6]	GASKET
3.	247-2834	[1]	MANIFOLD-EXHAUST (CENTER)
4.	231-9030	[2]	MANIFOLD-EXHAUST (END)
5.	116-3715 M	[12]	STUD-TAPERLOCK (M10X1.5X85-MM)
6.	9X-6620 M	[12]	LOCKNUT (M10X1.5-THD)
7.	6V-5839	[12]	WASHER (11X21X2.5-MM THK)
8.	9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)
	M		METRIC PART

Information:

AIR INLET AND EXHAUST SYSTEM

AIR CLEANER GP

Operation and Maintenance Manual

Engine Air Filter Element - Clean/Replace
16M Motor Grader

Special Instruction

Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Procedure to Install a New Air Filter Canister on Certain 16M Motor Graders Operating in Mining Applications {1051, 1054, 7251, 7263}
Procedure to Install a New Air Filter Canister on Certain 16M Motor Graders Operating in Mining Applications {1051, 1054, 7251, 7263}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Specifications

Air Cleaner
14M and 16M Motor Graders Machine Systems

Air Cleaner - Precleaner
C11 and C13 Engines

Air Cleaner
C11 and C13 Engines

Air Cleaner
14M and 16M Motor Graders Machine Systems

Air Cleaner
C11 and C13 Engines

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Reuse And Salvage Guidelines

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CLEANER ON CERTAIN 16M MOTOR GRADERS

Disassembly and Assembly

Air Cleaner - Remove and Install
16M Motor Grader Engine Supplement

Service Magazine

Changes to the Operation and Maintenance Manual (OMM) for Certain Motor Graders {1051, 1054}
2010/10/25

Procedure for the Proper Removal and Installation of the Primary and Secondary Air Filters on Certain Motor Graders {1051, 1054}
2010/10/08

Information Covering the Air Filters on Certain Motor Graders and Wheel Loaders {1051, 1054}
2011/05/09

A New Special Instruction , "Procedure to Install a New Air Filter Canister on Certain 16M Motor Graders Operating in Mining Applications" is Now Available {1051, 1054, 7251, 7263}
2012/05/21

Improved Retention For The Shunt Tank Hose In The Coolant Tank Group Is Now Used On Certain 16M Motor Graders {1051, 1054}
2015/05/29

249-7319 AIR CLEANER GP S/N B9H722-UP PART OF 349-2556 COMMON AR Type 1 16M MOTOR GRADER

AIR INLET AND EXHAUST SYSTEM

249-7319: AIR CLEANER GP

Parts for your 16M MOTOR GRADER:

249-7319: AIR CLEANER GP

Parts for your 16M MOTOR GRADER:

250-0366: AIR CLEANER GP

Parts for your 16M MOTOR GRADER:

257-4323: CARTRIDGE GP-TURBOCHARGER

Parts for your 16M MOTOR GRADER:

353-0281: KIT-TURBOCHARGER GASKET

Parts for your 16M MOTOR GRADER:

449-3768: KIT-TURBOCHARGER GASKET

Parts for your 16M MOTOR GRADER:

249-7322: LINES GP-AIR

Parts for your 16M MOTOR GRADER:

249-7322: LINES GP-AIR

Parts for your 16M MOTOR GRADER:

268-6686: LINES GP-AIR

Parts for your 16M MOTOR GRADER:

247-2833: MANIFOLD GP-EXHAUST

Parts for your 16M MOTOR GRADER:

Information:

Caterpillar Parts SIS Catalog 16M :