267-3863 CYLINDER GP-STEERING -NON ALL WHEEL DRIVE S/N B9H1-UP 76.2-MM (3-IN) BORE X 316-MM (12.44-IN) STROKE PART OF 264-1160 CYLINDER & MTG GP-STEERING 16M

HYDRAULIC SYSTEM

CYLINDER GP

0. 267-3863 CYLINDER G

DRIVE GP

1. 265-6725 DRIVE GP-C
2. 265-6725 DRIVE GP-C
3. 385-6727 DRIVE GP-C
4. 482-7524 DRIVE GP-C
5. 482-7761 DRIVE GP-C

HYDRAULIC GP

6. 296-5219 FAN AR-HYD

FILTER GP

7. 250-3507 FILTER & M
8. 191-9784 FILTER GP-

FLOAT AR-BLADE

9. 271-3652 FLOAT AR-B
0. INFORMATION

MOTOR GRADER 16M MOTOR GRADER B9H
16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine SEBP4108 16M B9H (2004)

HYDRAULIC SYSTEM

CYLINDER GP

257-5083 CYLINDER GP-SIDESHIFT

509-6996 CYLINDER GP-SIDESHIFT

267-3863 CYLINDER GP-STEERING

#SEBP41080870

267-3863: CYLINDER GP-STEERING

CYLINDER GP-STEERING

267-3863 CYLINDER GP-STEERING -NON ALL WHEEL DRIVE
S/N B9H1-UP
76.2-MM (3-IN) BORE X 316-MM (12.44-IN) STROKE
PART OF 264-1160 CYLINDER & MTG GP-STEERING

i02374085 SEBP4108

2673863 CYLINDER GP-STEERING Parts scheme

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-8737	[1]	PLUG-SEAL
2.	102-2244	[1]	GROMMET
3.	151-7038	[1]	HEAD
4.	212-0907	[1]	PLATE-CONNECTOR
5.	214-6480	[1]	PISTON
6.	217-3311	[1]	MAGNET (RING)
7.	242-9514	[1]	CARRIER
8.	242-9515	[1]	RING-RETAINING
9.	267-3864	[1]	CYLINDER AS-STEERING
	148-2592	[1]	BOSS AS
	1N-5999	[1]	PLUG-O-RING
	7J-0204	[1]	SEAL-O-RING
10.	267-3865	[1]	ROD AS
11.	276-1816	[1]	GUARD
12.	289-2935 J	[1]	SEAL AS-BUFFER
13.	289-2946 J	[1]	SEAL-U-CUP
14.	188-2199 J	[1]	SEAL-O-RING
15.	1H-7339 J	[1]	SEAL-O-RING
16.	215-1942 J	[1]	RING-BACKUP
17.	223-3353 J	[1]	RING-WEAR
18.	308-1845 J	[1]	SEAL-WIPER
19.	267-5257	[1]	SENSOR GP-POSITION (STEERING CYLINDER)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
20.	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
21.	3V-2431	[2]	WASHER (10.2X16X2-MM THK)
22.	4S-5565	[2]	BOLT (3/8-16X0.875-IN)
23.	4T-5613 J	[1]	RING-WEAR
24.	5J-4561	[1]	LOCKNUT (1-14-THD)
25.	6J-1972 J	[1]	SEAL AS
26.	6J-5731 J	[1]	RING-BACKUP
27.	8T-5070	[1]	SETSCREW-SOCKET (3/8-16X0.5-IN)
29.	9X-1386 E		SLEEVE (8.5-CM)
29A.	9X-1386 E		SLEEVE (3.0-CM)
30.	162-0177	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-8004	[1]	PLUG (9/16-18-THD)

			AVAILABLE REPAIR KIT(S):
	307-6273 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS, O-RINGS & SEALS)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP41080871

265-6725: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

265-6725 DRIVE GP-CIRCLE
S/N B9H1-230
PART OF 285-0103 COMMON AR

i02374451 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-1415	[1]	NUT (1-7/8-12-THD)
2.	2G-0339	[1]	WASHER-SPECIAL
3.	2G-0478	[10]	PLATE-CLUTCH
4.	4D-8186	[1]	PLUG-PIPE
5.	5K-5288	[2]	SEAL GP-DUO-CONE
			(EACH INCLUDES)
5A.	5K-5129	[2]	RING-SEALING
6.	5T-8059	[1]	WORM-CIRCLE DRIVE
7.	5T-8060	[1]	ADAPTER
8.	6G-1536	[1]	SPACER (69.88X90X13-MM THK)
9.	6G-1539	[1]	COVER
10.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
11.	307-1959 B	[6]	SHIM (0.13-MM THK)
12.	307-1960 B	[9]	SHIM (0.25-MM THK)
13.	6G-6122	[1]	SPRING-DISC
14.	6Y-7953	[11]	DISC-FRICTION
15.	8D-3984	[2]	CONE-BEARING
16.	8D-3986	[2]	CUP-BEARING
17.	8D-4523 B	[2]	SHIM (0.254-MM THK)
18.	8D-7333	[1]	COLLAR
19.	8W-6179	[1]	WASHER-THRUST
20.	8X-4028	[1]	GEAR-WORM (36-TEETH)
21.	9D-0089	[1]	CAGE AS
	7J-2604	[1]	BUSHING
22.	9D-1491	[1]	COUPLING
23.	9T-5977 Y	[1]	MOTOR GP-GEROTOR
24.	261-8555	[1]	PINION-CIRCLE DRIVE
25.	265-6723	[1]	HOUSING AS-DRIVE
	3J-2333	[2]	BUSHING
	4D-4823 N	[4]	STUD-TAPERLOCK (5/8-11-THD)
	292-4252 J	[4]	STUD-TAPERLOCK (M24-THD)
26.	278-1416	[1]	ADAPTER
27.	0S-1585	[11]	BOLT (1/2-13X1.5-IN)
28.	0S-1594	[4]	BOLT (3/8-16X1-IN)
29.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
30.	2B-0858	[2]	PLUG-PIPE
31.	2D-6533	[1]	SEAL-O-RING
32.	2D-8009	[1]	SEAL-O-RING
33.	2H-3931	[1]	SEAL-O-RING
34.	4H-6996	[1]	PIN-SPRING
35.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
36.	5K-7143	[2]	BOLT-SELF-LOCKING (1/2-13X1.5-IN)
37.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
38.	5P-8245	[13]	WASHER-HARD (13.5X25.5X3-MM THK)
39.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
40.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
41.	307-1965	[1]	SHAFT-PINION DRIVE
42.	6G-5538	[1]	COVER
43.	6G-5539	[1]	GASKET
44.	6G-5547	[1]	PLATE
45.	8D-4522 B	[4]	SHIM (0.127-MM THK)
46.	8D-7341	[1]	GASKET
47.	8D-7343	[1]	WASHER-THRUST (3.12X4.62X0.09-MM THK)
48.	8D-7424	[1]	SPACER (48X81X6-MM THK)
49.	8T-0336	[1]	FITTING-PRESSURE RELIEF
50.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
51.	9D-0088	[1]	COVER
	B		USE AS REQUIRED
	J		REQUIRES (4) 8T-4001 NUTS & (4) 8T-4167 WASHERS, NOT PART OF THIS GROUP
	N		REQUIRES (4) 4K-0367 NUTS & (4) 5P-8247 WASHERS, NOT PART OF THIS GROUP
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41080872

265-6725: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

265-6725 DRIVE GP-CIRCLE
S/N B9H231-866
PART OF 285-0103, 349-2556 COMMON AR

i02876619 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-1415	[1]	NUT (1-7/8-12-THD)
2.	2G-0339	[1]	WASHER-SPECIAL
3.	2G-0478	[10]	PLATE-CLUTCH
4.	4D-8186	[1]	PLUG-PIPE
5.	5K-5288	[2]	SEAL GP-DUO-CONE
			(EACH INCLUDES)
	5K-5129	[2]	RING-SEALING
6.	5T-8059	[1]	WORM-CIRCLE DRIVE
7.	5T-8060	[1]	ADAPTER
8.	6G-1536	[1]	SPACER (69.88X90X13-MM THK)
9.	6G-1539	[1]	COVER
10.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
11.	6G-6122	[1]	SPRING-DISC
12.	6Y-7953	[11]	DISC-FRICTION
13.	8D-3984	[2]	CONE-BEARING
14.	8D-3986	[2]	CUP-BEARING
15.	8D-4523 BC	[2]	SHIM (0.254-MM THK)
16.	8D-7333	[1]	COLLAR
17.	8W-6179	[1]	WASHER-THRUST
18.	8X-4028	[1]	GEAR-WORM (36-TEETH)
19.	9D-0089	[1]	CAGE AS
19A.	7J-2604	[1]	BUSHING
20.	9D-1491	[1]	COUPLING
21.	9T-5977 Y	[1]	MOTOR GP-GEROTOR
22.	261-8555	[1]	PINION-CIRCLE DRIVE
23.	265-6723	[1]	HOUSING AS-DRIVE
23A.	3J-2333	[2]	BUSHING
23B.	4D-4823 N	[4]	STUD-TAPERLOCK (5/8-11-THD)
23C.	292-4252 J	[4]	STUD-TAPERLOCK (M24-THD)
24.	278-1416	[1]	ADAPTER
25.	307-1959 BC	[6]	SHIM (0.13-MM THK)
26.	307-1960 BC	[1]	SHIM (0.25-MM THK)
27.	307-1961 C	[1]	PLATE
28.	307-1962 BC	[4]	SHIM (0.5-MM THK)
29.	307-1965 C	[1]	SHAFT-PINION DRIVE
30.	0S-1585 C	[8]	BOLT (1/2-13X1.5-IN)
31.	0S-1594	[4]	BOLT (3/8-16X1-IN)
32.	2J-3118	[4]	BOLT-LOCKING (3/8-16X1.25-IN)
33.	2B-0858	[2]	PLUG-PIPE
34.	2D-6533	[1]	SEAL-O-RING
35.	2D-8009	[1]	SEAL-O-RING
36.	2H-3931	[1]	SEAL-O-RING
37.	4H-6996	[1]	PIN-SPRING
38.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
39.	5K-7143	[2]	BOLT-SELF-LOCKING (1/2-13X1.5-IN)
40.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
41.	5P-8245 C	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
42.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
43.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
44.	6G-5538	[1]	COVER
45.	6G-5539	[1]	GASKET
46.	6V-5686 CM	[3]	BOLT (M16X2X50-MM)
47.	8D-4522 BC	[4]	SHIM (0.127-MM THK)
48.	8D-5054 C	[3]	WASHER-HARD (17X30X3-MM THK)
49.	8D-7341	[1]	GASKET
50.	8D-7343	[1]	WASHER-THRUST (3.12X4.62X0.09-MM THK)
51.	8D-7424	[1]	SPACER (48X81X6-MM THK)
52.	8T-0336	[1]	FITTING-PRESSURE RELIEF
53.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
54.	9D-0088	[1]	COVER
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		REQUIRES (4) 8T-4001 NUTS & (4) 8T-4167 WASHERS, NOT PART OF THIS GROUP
	M		METRIC PART
	N		REQUIRES (4) 4K-0367 NUTS & (4) 5P-8247 WASHERS, NOT PART OF THIS GROUP
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41080873

385-6727: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

385-6727 DRIVE GP-CIRCLE
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
AN ATTACHMENT

i05268554 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-1415	[1]	NUT (1-7/8-12-THD)
2.	2G-0339	[1]	WASHER-SPECIAL
3.	2G-0478	[10]	PLATE-CLUTCH
4.	5K-5288	[2]	SEAL GP-DUO-CONE
			(EACH INCLUDES)
	5K-5129	[2]	RING-SEALING
5.	5T-8059	[1]	WORM-CIRCLE DRIVE
6.	5T-8060	[1]	ADAPTER
7.	6G-1536	[1]	SPACER (69.88X90X13-MM THK)
8.	6G-1539	[1]	COVER
9.	6G-5538	[1]	COVER
10.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
11.	6G-6122	[1]	SPRING-DISC
12.	6Y-7953	[11]	DISC-FRICTION
13.	8D-3984	[2]	CONE-BEARING
14.	8D-3986	[2]	CUP-BEARING
15.	8D-4523 B	[2]	SHIM (0.254-MM THK)
16.	8D-7333	[1]	COLLAR
17.	8W-6179	[1]	WASHER-THRUST
18.	8X-4028	[1]	GEAR-WORM (36-TEETH)
19.	9D-0088	[1]	COVER
20.	9D-0089	[1]	CAGE AS
20A.	7J-2604	[1]	BUSHING
21.	9D-1491	[1]	COUPLING
22.	9T-5977 Y	[1]	MOTOR GP-GEROTOR
23.	261-8555	[1]	PINION-CIRCLE DRIVE
24.	307-1959 B	[6]	SHIM (0.13-MM THK)
25.	307-1960 B	[1]	SHIM (0.25-MM THK)
26.	307-1961	[1]	PLATE
27.	307-1962 B	[4]	SHIM (0.5-MM THK)
28.	307-1965	[1]	SHAFT-PINION DRIVE
29.	442-5781	[1]	ADAPTER
30.	389-8348	[1]	HOUSING AS-DRIVE
30A.	3J-2333	[2]	BUSHING
	4D-4823	[4]	STUD-TAPERLOCK (5/8-11-THD)
	116-3720 M	[2]	STUD-TAPERLOCK (M24X3X105-MM)
31.	0S-1585	[8]	BOLT (1/2-13X1.5-IN)
32.	0S-1594	[4]	BOLT (3/8-16X1-IN)
33.	116-2434 M	[2]	BOLT (M24X3X170-MM)
34.	126-8928	[4]	WASHER-HARD (26X40X8-MM THK)
35.	1B-5174	[1]	PLUG-PIPE
36.	267-3507	[3]	WASHER-HARD (26X47X12-MM THK)
37.	8T-4001 M	[4]	NUT (M24X3-THD)
38.	2B-0858	[1]	PLUG-PIPE
39.	2D-6533	[1]	SEAL-O-RING
40.	5H-3252	[1]	SEAL-O-RING
41.	2H-3931	[1]	SEAL-O-RING
42.	2J-3118	[4]	BOLT-LOCKING (3/8-16X1.25-IN)
43.	4H-6996	[1]	PIN-SPRING
44.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
45.	5K-7143	[2]	BOLT-SELF-LOCKING (1/2-13X1.5-IN)
46.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
47.	5P-8245	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
48.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
49.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
50.	6G-5539	[1]	GASKET
51.	6V-5686 M	[3]	BOLT (M16X2X50-MM)
52.	7X-2575 M	[1]	BOLT (M24X3X60-MM)
53.	8D-4522 B	[4]	SHIM (0.127-MM THK)
54.	8D-5054	[3]	WASHER-HARD (17X30X3-MM THK)
55.	8D-7341	[1]	GASKET
56.	8D-7343	[1]	WASHER-THRUST (3.12X4.62X0.09-MM THK)
57.	8D-7424	[1]	SPACER (48X81X6-MM THK)
58.	8T-0336	[1]	FITTING-PRESSURE RELIEF
59.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41080874

482-7524: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

482-7524 DRIVE GP-CIRCLE
S/N B9H1-UP
PART OF 482-7761 DRIVE GP-CIRCLE
FIELD REPLACEMENT FOR 265-6742
AN ATTACHMENT

i06536434 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-0339	[1]	WASHER-SPECIAL
2.	2G-0478	[10]	PLATE-CLUTCH
3.	5K-5288	[2]	SEAL GP-DUO-CONE
			(EACH INCLUDES)
	5K-5129	[2]	RING-SEALING
4.	5T-8060	[1]	ADAPTER
5.	6G-1539	[1]	COVER
6.	6G-5538	[1]	COVER
7.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
8.	6Y-7953	[11]	DISC-FRICTION
9.	8D-4522 B	[4]	SHIM (0.127-MM THK)
10.	8D-4523 B	[2]	SHIM (0.254-MM THK)
11.	8D-7333	[1]	COLLAR
12.	265-6724	[1]	HOUSING-DRIVE
13.	307-1959 B	[6]	SHIM (0.13-MM THK)
14.	307-1960 B	[1]	SHIM (0.25-MM THK)
15.	307-1961	[1]	PLATE
16.	307-1962 B	[4]	SHIM (0.5-MM THK)
17.	450-5243	[1]	SHAFT
18.	558-2101	[1]	PINION
19.	523-9068	[1]	GEAR-WORM
20.	450-6182	[1]	GEAR-WORM
21.	454-6333	[1]	CAGE AS
21A.	7J-2604	[1]	BUSHING
22.	461-2375	[1]	FILM-INFORMATION (FINAL DRIVE OIL)
23.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
24.	165-3930	[4]	BOLT (3/8-16X1.625-IN)
25.	1A-1415	[1]	NUT (1-7/8-12-THD)
26.	1B-5174	[1]	PLUG-PIPE
27.	2B-0858	[1]	PLUG-PIPE
28.	2D-6533	[1]	SEAL-O-RING
29.	3J-2333	[2]	BUSHING
30.	4D-4823	[4]	STUD-TAPERLOCK (5/8-11-THD)
31.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
32.	5H-3252	[1]	SEAL-O-RING
33.	5K-7143	[2]	BOLT-SELF-LOCKING (1/2-13X1.5-IN)
34.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
36.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
38.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
39.	6G-1536	[1]	SPACER (69.88X90X13-MM THK)
40.	6G-5539	[1]	GASKET
41.	6G-6122	[1]	SPRING-DISC
42.	6V-5686 M	[3]	BOLT (M16X2X50-MM)
43.	8D-3984	[2]	CONE-BEARING
44.	8D-3986	[2]	CUP-BEARING
45.	8D-5054	[3]	WASHER-HARD (17X30X3-MM THK)
46.	8D-7343	[1]	WASHER-THRUST (3.12X4.62X0.09-MM THK)
47.	8D-7424	[1]	SPACER (48X81X6-MM THK)
48.	8T-0336	[1]	FITTING-PRESSURE RELIEF
49.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
50.	8W-6179	[1]	WASHER-THRUST
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP41080875

482-7761: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

482-7761 DRIVE GP-CIRCLE
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
AN ATTACHMENT

i06674450 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9D-1491	[1]	COUPLING
2.	9T-5977 Y	[1]	MOTOR GP-GEROTOR
3.	442-5781	[1]	ADAPTER
4.	482-7524 Y	[1]	DRIVE GP-CIRCLE
5.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
6.	116-2434 M	[2]	BOLT (M24X3X170-MM)
7.	116-3720 M	[2]	STUD-TAPERLOCK (M24X3X105-MM)
8.	126-8928	[4]	WASHER-HARD (26X40X8-MM THK)
9.	267-3507	[3]	WASHER-HARD (26X47X12-MM THK)
10.	2H-3931	[1]	SEAL-O-RING
11.	4H-6996	[1]	PIN-SPRING
12.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	7X-2575 M	[1]	BOLT (M24X3X60-MM)
14.	8T-4001 M	[4]	NUT (M24X3-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41080876

296-5219: FAN AR-HYDRAULIC

FAN AR-HYDRAULIC

296-5219 FAN AR-HYDRAULIC
S/N B9H1-UP
AN ATTACHMENT

i02822458 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
259-9075 Y	[1]	LINES GP-HYDRAULIC FAN

296-5218	[1]	FAN
Y		SEPARATE ILLUSTRATION

#SEBP41080877

250-3507: FILTER & MTG GP-HYDRAULIC

FILTER & MTG GP-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9H1-UP
PART OF 250-0162 SERVICE CENTER AR

i02178358 SEBP4108

2503507 FILTER & MTG GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-8407	[1]	PLUG AS
	9S-4191	[1]	PLUG (9/16-18-THD)
	3J-1907	[1]	SEAL-O-RING
3.	242-0407	[1]	VALVE AS-DRAIN (HYDRAULIC FILTER)
4.	245-7603	[1]	TUBE AS
5.	245-8964	[1]	BLOCK
6.	249-2307 Y	[1]	FILTER GP-OIL (HYDRAULIC TANK RETURN)
7.	257-8897	[1]	HOSE-MOLDED
8.		[2]	PLUG AS
			(EACH INCLUDES)
	9S-4183	[1]	PLUG (1-1/16-12-THD)
	3D-2824	[1]	SEAL-O-RING
9.	156-4283	[1]	CONNECTOR AS
	8T-7926	[1]	CONNECTOR
	6K-6307	[1]	SEAL-O-RING
	8T-0315	[1]	SEAL-O-RING
10.	294-9701	[1]	TUBE AS
11.	294-9702	[1]	TUBE AS
12.	4J-0524	[2]	SEAL-O-RING
13.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
14.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[2]	NUT (M10X1.5-THD)
16.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
17.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-6703	[4]	CLAMP-HOSE
20.	8X-5489	[1]	SLEEVE
21.	122-6908 G		HOSE-HYDRAULIC (6.3-IN)
22.	9X-2023 E		HOSE (31-CM)
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41080878

191-9784: FILTER GP-OIL

FILTER GP-OIL

191-9784 FILTER GP-OIL -IMPLEMENT PILOT OIL
S/N B9H1-UP
PART OF 283-7735 LINES GP-PUMP

i01441603 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8878	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)
2.	7X-8549	[1]	SWITCH AS-PRESSURE (FILTER BYPASS)
	3J-1907	[1]	SEAL-O-RING
3.	8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
4.	183-7264	[1]	VALVE AS-FLUID SAMPLING (FILTER OIL)
4A.	3J-1907		SEAL-O-RING

#SEBP41080879

271-3652: FLOAT AR-BLADE

FLOAT AR-BLADE

271-3652 FLOAT AR-BLADE
S/N B9H1-UP
CANNOT BE USED WITH @@@@@366-3375@@@@@, @@@@@354-8463@@@@@
AN ATTACHMENT

i02619824 SEBP4108

For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
277-6005 Y	[1]	LINES GP-HYDRAULIC (BLADE CUSHION)
276-8498 Y	[1]	PANEL GP-CONTROL (VARIABLE BLADE FLOAT)
321-6987 Y	[1]	SWITCH GP-ROCKER (BLADE CUSHION)
250-0900 Y	[1]	WIRING GP-SENSOR (VARIABLE BLADE FLOAT)
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER FLAG PIN AND BOLT ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER FLAG PIN AND BOLT ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Information Release Memo

REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS

CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DRAWBAR BRACKETS ON CERTAIN 16M MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 253-4676 SIDESHIFT BRACKET ON CERTAIN 16M MOTOR GRADERS

Caterpillar Parts SIS Catalog 16M :

509-6996 CYLINDER GP-SIDESHIFT

257-5083 CYLINDER GP-SIDESHIFT

477-9271 CYLINDER GP-RIPPER

113-5264 CYLINDER GP-RIPPER

270-7538 CYLINDER GP-LIFT

289-3054 CYLINDER GP-HYDRAULIC

262-1905 CYLINDER GP-CENTERSHIFT

9T-8944 CYLINDER GP-BLADE TIP

265-6725 DRIVE GP-CIRCLE

385-6727 DRIVE GP-CIRCLE

482-7524 DRIVE GP-CIRCLE

482-7761 DRIVE GP-CIRCLE

296-5219 FAN AR-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC

191-9784 FILTER GP-OIL