AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-4500 CIRCLE GP S/N B9H1-UP PART OF 440-4262 IMPLEMENT AR Type 1 AN ATTACHMENT 16M MOTOR GRADER


IMPLEMENTS
CIRCLE GP
DRAWBAR GP
MACHINE ARRANGEMENT
MACHINE AR
IMPLEMENTS
CIRCLE GP

MOTOR GRADER 16M MOTOR GRADER B9H
 16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine SEBP4108 16M B9H   (2004)

IMPLEMENTS

CIRCLE GP
CIRCLE & BEAM AS
390-9853 CIRCLE & BEAM AS
CIRCLE GP
259-4500 CIRCLE GP
CIRCLE GP
259-4500 CIRCLE GP
CIRCLE GP
259-4500 CIRCLE GP
PLATE GP-WEAR
378-0429 PLATE GP-WEAR
PLATE GP-WEAR
390-7857 PLATE GP-WEAR
 

#SEBP41081010
 

259-4500: CIRCLE GP

259-4500 CIRCLE GP
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
Type 1
AN ATTACHMENT
i06093541 SEBP4108
2594500 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4831 [2] SHAFT  
2. 253-4643 B [2] SHIM (2-MM THK)  
3. 281-4299 Y [1] CIRCLE & BEAM AS  
4. 4J-1888 [4] PIN-COTTER  
5. 5F-3715 [4] NUT-SLOTTED HEX (2-12-THD)  
6. 7Y-0725 [8] WASHER-HARD (52X92X8-MM THK)  
7. 8W-4167 C [4] BUSHING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41081011
 

259-4500: CIRCLE GP

259-4500 CIRCLE GP
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
Type 2
AN ATTACHMENT
i07048807 SEBP4108
2594500 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4831 [2] SHAFT  
2. 253-4643 B [2] SHIM (2-MM THK)  
3. 390-9853 CY [1] CIRCLE & BEAM AS  
4. 4J-1888 [4] PIN-COTTER  
5. 5F-3715 [4] NUT-SLOTTED HEX (2-12-THD)  
6. 7Y-0725 [8] WASHER-HARD (52X92X8-MM THK)  
7. 8W-4167 [4] BUSHING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41081012
 

257-4930: DRAWBAR GP

257-4930 DRAWBAR GP
S/N B9H1-866
PART OF 285-0103, 349-2556 COMMON AR
i02608583 SEBP4108
2574930 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 6G-4896 [1] BALL  
3. 6K-6444 [2] SPACER  
5. 268-5743 [2] PLATE  
6. 185-7115 B [114] SHIM (0.5-MM THK)  
7. 308-6304 [6] SHOE-CIRCLE GUIDE  
8. 389-7310 [1] DRAWBAR AS  
8A. 178-3088 [3] STUD-BALL  
  [2] BLOCK  
  8Y-4489 M [1] BOSS (M10X1.5-THD)  
  9C-8895 M [3] BOSS-TAPPED (M10X1.5-THD)  
  9R-2672 M [22] BOSS-THREADED (M10X1.5X120-MM)  
  185-7120 [1] SHAFT AS  
  257-4933 [1] PLATE  
9. 257-4932 B [36] SHIM (0.25-MM THK)  
10. 302-6343 B [6] PLATE  
12. 259-4468 [1] CAP  
13. 259-4469 [1] ADAPTER  
14. 259-4470 B [1] SHIM (0.12-MM THK)  
15. 259-4471 B [3] SHIM (0.25-MM THK)  
16. 259-4472 B [3] SHIM (0.76-MM THK)  
17. 259-4473 B [2] SHIM (1.52-MM THK)  
18. 278-1415 [2] PLATE  
19. 283-1578 [19] WASHER-HARD (22X45X10-MM THK)  
20. 267-3507 [18] WASHER-HARD (26X47X12-MM THK)  
21. 292-5889 [12] SETSCREW (1-8X3.25-IN)  
22. 292-9277 [4] WASHER-HARD (26X40X8-MM THK)  
23. 106-4175 M [21] BOLT (M20X2.5X60-MM)  
24. 112-3926 M [8] BOLT (M20X2.5X110-MM)  
25. 112-3928 M [18] BOLT (M24X3X130-MM)  
26. 116-2434 M [4] BOLT (M24X3X170-MM)  
27. 267-3506 [4] WASHER-HARD (26X44X4-MM THK)  
28. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
29. 268-8262 M [4] NUT (M24X3-THD)  
30. 1D-6306 [12] NUT (1-8-THD)  
31. 8T-1160 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
32. 9S-8892 [6] BOLT-12 POINT HEAD (3/4-16X3.5-IN)  
33. 302-6333 B [6] PLATE  
34. 6V-3531 M [1] BOLT (M20X2.5X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41081013
 

385-6730: DRAWBAR GP

385-6730 DRAWBAR GP
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
Type 1
AN ATTACHMENT
i05268552 SEBP4108
3856730 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4896 [1] BALL  
2. 6K-6444 [2] SPACER  
3. 185-7115 B [152] SHIM (0.5-MM THK)  
4. 257-4932 B [48] SHIM (0.25-MM THK)  
5. 259-4468 [1] CAP  
6. 259-4469 [1] ADAPTER  
7. 259-4470 B [1] SHIM (0.12-MM THK)  
8. 259-4471 B [3] SHIM (0.25-MM THK)  
9. 259-4472 B [3] SHIM (0.76-MM THK)  
10. 259-4473 B [2] SHIM (1.52-MM THK)  
11. 268-5743 [2] PLATE  
13. 302-6333 [8] PLATE  
14. 302-6343 [8] PLATE  
15. 308-6304 [6] SHOE-CIRCLE GUIDE  
16. 399-2512 [1] DRAWBAR AS  
16A. 178-3088 [3] STUD-BALL  
  8Y-4489 M [1] BOSS (M10X1.5-THD)  
  9R-2672 M [31] BOSS-THREADED (M10X1.5X120-MM)  
  9R-3845 M [3] BOSS (M12X1.75X38-MM)  
  185-7120 [1] SHAFT AS  
  234-7565 [1] BLOCK  
17. 424-7251 [2] PLATE  
18. 106-4175 M [24] BOLT (M20X2.5X60-MM)  
19. 112-3926 M [8] BOLT (M20X2.5X110-MM)  
20. 112-3928 M [18] BOLT (M24X3X130-MM)  
21. 116-2434 M [2] BOLT (M24X3X170-MM)  
22. 1D-6306 [12] NUT (1-8-THD)  
23. 267-3507 [25] WASHER-HARD (26X47X12-MM THK)  
24. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
25. 268-8262 M [3] NUT (M24X3-THD)  
26. 283-1578 [22] WASHER-HARD (22X45X10-MM THK)  
27. 292-5889 [12] SETSCREW (1-8X3.25-IN)  
28. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
29. 7X-2489 M [3] BOLT (M24X3X100-MM)  
30. 7X-2577 M [1] BOLT (M24X3X90-MM)  
31. 101-7396 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
32. 8T-5379 M [5] BOLT (M24X3X50-MM)  
33. 9S-8892 [6] BOLT-12 POINT HEAD (3/4-16X3.5-IN)  
34. 126-8928 [7] WASHER-HARD (26X40X8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41081014
 

385-6730: DRAWBAR GP

385-6730 DRAWBAR GP
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
Type 2
AN ATTACHMENT
i07097214 SEBP4108
3856730 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 6K-6444 [2] SPACER  
3. 185-7115 B [152] SHIM (0.5-MM THK)  
  257-4932 B [48] SHIM (0.25-MM THK)  
5. 259-4468 [1] CAP  
6. 259-4469 [1] ADAPTER  
7. 259-4470 B [1] SHIM (0.12-MM THK)  
  259-4471 B [1] SHIM (0.25-MM THK)  
  259-4472 B [1] SHIM (0.76-MM THK)  
  259-4473 B [1] SHIM (1.52-MM THK)  
11. 268-5743 [2] PLATE  
12. 302-6333 [8] PLATE  
13. 302-6343 [8] PLATE  
14. 308-6304 [6] SHOE-CIRCLE GUIDE  
15. 424-7251 [2] PLATE  
16. 495-8951 C [1] BALL  
17. 502-3890 C [1] DRAWBAR AS  
17A. 234-7565 [1] BLOCK  
17B. 122-9709 [1] BLOCK  
17C. [4] BLOCK  
17D. 8Y-3795 M [3] BOSS (M10X1.5X39-MM)  
17E. 8Y-4489 M [1] BOSS (M10X1.5-THD)  
17F. 9R-2672 M [28] BOSS-THREADED (M10X1.5X120-MM)  
17G. 185-7120 [1] SHAFT AS  
17H. 257-4933 [1] PLATE  
17J. 385-6726 [2] GUSSET  
17K. 472-1052 [3] STUD-BALL  
18. 101-7396 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
19. 106-4175 M [24] BOLT (M20X2.5X60-MM)  
20. 112-3926 M [8] BOLT (M20X2.5X110-MM)  
21. 112-3928 M [18] BOLT (M24X3X130-MM)  
22. 116-2434 M [2] BOLT (M24X3X170-MM)  
23. 126-8928 [7] WASHER-HARD (26X40X8-MM THK)  
24. 1D-6306 [12] NUT (1-8-THD)  
25. 267-3507 [25] WASHER-HARD (26X47X12-MM THK)  
26. 8T-4001 M [3] NUT (M24X3-THD)  
27. 283-1578 [22] WASHER-HARD (22X45X10-MM THK)  
28. 292-5889 [12] SETSCREW (1-8X3.25-IN)  
29. 7X-2489 M [3] BOLT (M24X3X100-MM)  
30. 7X-2577 M [1] BOLT (M24X3X90-MM)  
31. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
32. 8T-5379 M [5] BOLT (M24X3X50-MM)  
33. 9S-8892 [6] BOLT-12 POINT HEAD (3/4-16X3.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP41081015
 

440-4262: IMPLEMENT AR

440-4262 IMPLEMENT AR
S/N B9H1-UP
AN ATTACHMENT
i06674424 SEBP4108
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  257-3466 Y [1] BIT GP-END  
  249-9170 Y [1] BLADE GP  
  259-4500 Y [1] CIRCLE GP  
  260-3646 Y [1] CYLINDER & MTG GP-BLADE TIP  
  261-2373 Y [1] CYLINDER & MTG GP-CENTERSHIFT  
  257-6804 Y [1] CYLINDER & MTG GP-SIDESHIFT  
  385-6730 Y [1] DRAWBAR GP  
  385-6727 Y [1] DRIVE GP-CIRCLE  
    -OR-
  482-7761 Y [1] DRIVE GP-CIRCLE  
  257-3462 Y [1] EDGE GP-CUTTING (25-MM THK, CURVED)  
  440-0541 Y [1] LINES GP-HYDRAULIC  
  390-7857 Y [1] PLATE GP-WEAR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41081016
 

378-0429: PLATE GP-WEAR

378-0429 PLATE GP-WEAR
S/N B9H1-UP
AN ATTACHMENT
i04853090 SEBP4108
3780429 PLATE GP-WEAR Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-2945 B [4] SHIM (0.76-MM THK)  
2. 2G-2946 B [4] SHIM (1.52-MM THK)  
3. 6G-4372 [6] STRIP-WEAR  
4. 252-7089 [4] STRIP-WEAR  
5. 253-4635 [2] PLATE AS  
6. 352-1002 [6] STRIP-WEAR  
7. 283-1578 [6] WASHER-HARD (22X45X10-MM THK)  
8. 6V-7729 M [6] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41081017
 

390-7857: PLATE GP-WEAR

390-7857 PLATE GP-WEAR -METALLIC
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
CANNOT BE USED WITH @@@@@390-7858@@@@@
AN ATTACHMENT
i05028730 SEBP4108
3907857 PLATE GP-WEAR Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-2945 B [4] SHIM (0.76-MM THK)  
2. 2G-2946 B [4] SHIM (1.52-MM THK)  
3. 6G-4372 [6] STRIP-WEAR  
4. 446-1523 [4] STRIP-WEAR  
5. 253-4635 [2] PLATE AS  
6. 352-1002 [8] STRIP-WEAR  
7. 283-1578 [6] WASHER-HARD (22X45X10-MM THK)  
8. 6V-7729 M [6] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41081018
 

390-7857: PLATE GP-WEAR

390-7857 PLATE GP-WEAR -METALLIC
S/N B9H1-UP
PART OF 440-4262 IMPLEMENT AR
CANNOT BE USED WITH @@@@@390-7858@@@@@
AN ATTACHMENT
i06093542 SEBP4108
3907857 PLATE GP-WEAR Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-2945 B [4] SHIM (0.76-MM THK)  
2. 2G-2946 B [4] SHIM (1.52-MM THK)  
3. 6G-4372 [6] STRIP-WEAR  
4. 253-4635 [2] PLATE AS  
5. 352-1002 [8] STRIP-WEAR  
6. 446-1523 [4] STRIP-WEAR  
7. 449-1750 C [4] RETAINER  
8. 449-1751 C [4] RETAINER  
9. 449-8701 C [1] BRACKET AS  
10. 7X-0481 C [12] BOLT (1/2-13X8-IN)  
11. 8T-4223 C [24] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 9X-0941 C [12] LOCKNUT (1/2-13-THD)  
13. 8W-4167 [4] BUSHING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP41081019
 

390-7858: PLATE GP-WEAR

390-7858 PLATE GP-WEAR
S/N B9H1-UP
NON-METALLIC
CANNOT BE USED WITH @@@@@390-7857@@@@@
AN ATTACHMENT
i05028754 SEBP4108
3907858 PLATE GP-WEAR Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 446-1523 [2] STRIP-WEAR  
2. 253-4627 [2] STRIP-WEAR  
3. 253-4628 [2] STRIP-WEAR  
4. 253-4635 [2] PLATE AS  
5. 302-6331 [8] STRIP-WEAR  
6. 308-6303 [6] STRIP-WEAR  
7. 129-2220 M [4] SETSCREW-SOCKET (M20X2.5X80-MM)  
8. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
9. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
10. 8T-8555 M [2] SETSCREW-SOCKET (M20X2.5-THD)  
11. 8C-6854 M [16] BOLT (M14X2X50-MM)  
12. 8W-4167 [4] BUSHING  
13. 243-6700 [1] BRACKET AS  
14. 253-4629 [4] RETAINER  
15. 269-8248 [4] RETAINER  
16. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Circle Clearances - Check/Adjust
16M Motor Grader
Circle Top - Lubricate
16M Motor Grader
Special Instruction
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation Procedure for Drawbar and Moldboard Wear Strip Group on Certain 16M Motor Graders{6820}
Installation Procedure for Drawbar and Moldboard Wear Strip Group on Certain 16M Motor Graders{6820}
Instructions For Installing a New Moldboard Bracket Assembly on Certain 14M and 16M Motor Graders{6152, 6154, 6155}
Instructions For Installing a New Moldboard Bracket Assembly on Certain 14M and 16M Motor Graders{6152, 6154, 6155}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Technical Information Bulletin
Inspect the Mounting for the Moldboard on 16M Motor Graders{6152, 6154, 6155}
Inspect the Mounting for the Moldboard on 16M Motor Graders{6152, 6154, 6155}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOLDBOARD MOUNTING BRACKET ASSEMBLY ON CERTAIN 140M, 160M, 14M, AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CIRCLE SHOE WASHERS ON CERTAIN 16M MOTOR GRADERS
Disassembly and Assembly
Circle - Remove
16M Motor Grader Machine Systems
Circle - Install
16M Motor Grader Machine Systems
Drawbar - Remove
16M Motor Grader Machine Systems
Drawbar - Install
16M Motor Grader Machine Systems
Service Magazine
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Steel Wear Strips for the Circle Group are Available for the 14M and 16M Motor Graders {6152, 6154, 6155}
2009/11/16
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
Improved Wearstrip Retention For The Moldboard On Certain M Series Motor Grader {6152, 6154, 6155}
2011/05/12
Improved Wearstrip Retention for the Moldboard on Certain 14M and 16M Series Motor Graders {6152, 6154, 6155}
2011/05/12
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
2011/06/30
A New Procedure to Install the Wear Plate Group for Drawbar and Moldboard Is Now Available for 16M Motor Graders {6820}
2011/11/16
An Improved Moldboard Bracket Assembly is Now Available On Certain 14M and 16M Motor Graders {6152, 6154, 6155}
2015/03/06

Caterpillar Parts SIS Catalog 16M :

CIRCLE GP
259-4500 CIRCLE GP
CIRCLE & BEAM AS
390-9853 CIRCLE & BEAM AS
CIRCLE & BEAM AS
281-4299 CIRCLE & BEAM AS
VALVE GP-STEERING
366-6681 VALVE GP-STEERING
VALVE GP-STEERING
308-0936 VALVE GP-STEERING
VALVE GP-SOLENOID & MANIFOLD
279-6521 VALVE GP-SOLENOID & MANIFOLD
VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
CIRCLE GP
259-4500 CIRCLE GP
DRAWBAR GP
257-4930 DRAWBAR GP
DRAWBAR GP
385-6730 DRAWBAR GP
DRAWBAR GP
385-6730 DRAWBAR GP
440-4262 IMPLEMENT AR
PLATE GP-WEAR
378-0429 PLATE GP-WEAR
PLATE GP-WEAR
390-7857 PLATE GP-WEAR
PLATE GP-WEAR
390-7857 PLATE GP-WEAR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.