AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

327-2173 CYLINDER & LINES GP-FELLING HD -ACCUMULATOR ARMS S/N PAM102-103; PAM111-111; PAM114-115; PAM117-118 PART OF 327-2175 HEAD AR-FELLING AN ATTACHMENT HF201


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

FELLING HEAD HF201 FELLING HEAD CKL
 HF201 Felling Head CKL00356-UP (MACHINE) SEBP4120 HF201 CKL   (2000)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP-FELLING HD
280-2800 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-FELLING HD
327-2173 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-FELLING HD
327-2173 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-FELLING HD
327-2173 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-TILT
205-1968 CYLINDER & LINES GP-TILT
CYLINDER & LINES GP-TILT
301-7382 CYLINDER & LINES GP-TILT
 

#SEBP41200010
 

327-2173: CYLINDER & LINES GP-FELLING HD

327-2173 CYLINDER & LINES GP-FELLING HD -ACCUMULATOR ARMS
S/N PAM102-103; PAM111-111; PAM114-115; PAM117-118
PART OF 327-2175 HEAD AR-FELLING
AN ATTACHMENT
i03555681 SEBP4120
3272173 CYLINDER & LINES GP-FELLING HD Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 179-4825 [2] PIN  
3. 280-2801 [2] PIN  
4. 280-2802 [2] PIN  
5. 280-2803 [2] PIN  
6. 320-5211 Y [4] CYLINDER GP-HYDRAULIC  
7. 096-4885 M [8] LOCKNUT (M16X2-THD)  
8. 183-6863 C [4] MANIFOLD  
9. 343-5810 CY [1] LINES GP-FELLING HEAD CYLINDER  
10. 9X-8399 [2] WASHER (33X56X6-MM THK)  
11. 8T-4223 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4174 M [8] BOLT (M16X2X120-MM)  
13. 8T-4176 CM [4] BOLT (M12X1.75X90-MM)  
14. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
15. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41200011
 

327-2173: CYLINDER & LINES GP-FELLING HD

327-2173 CYLINDER & LINES GP-FELLING HD -ACCUMULATOR ARMS
S/N PAM104-110; PAM112-113; PAM116-116; PAM119-UP
PART OF 327-2175 HEAD AR-FELLING
AN ATTACHMENT
i03864246 SEBP4120
3272173 CYLINDER & LINES GP-FELLING HD Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 179-4825 [2] PIN  
3. 280-2801 [2] PIN  
4. 280-2802 [2] PIN  
5. 280-2803 [2] PIN  
6. 349-9334 CY [4] CYLINDER GP-GRAPPLE  
7. 096-4885 M [8] LOCKNUT (M16X2-THD)  
8. 183-6863 [4] MANIFOLD  
9. 377-0028 CY [1] LINES GP-FELLING HEAD CYLINDER  
10. 9X-8399 [2] WASHER (33X56X6-MM THK)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4174 M [8] BOLT (M16X2X120-MM)  
13. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
14. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
15. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41200012
 

205-1968: CYLINDER & LINES GP-TILT

205-1968 CYLINDER & LINES GP-TILT -PARTIAL
PART OF 205-1786, 205-1787, 205-1788, 205-1790, 247-0475 TILT AR-FELLING HEAD
AN ATTACHMENT
i01554110 SEBP4120
2051968 CYLINDER & LINES GP-TILT Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-9208 [1] PIN  
2. 183-9209 [1] PIN  
3. 190-2455 Y [1] CYLINDER GP-TILT (PARTIAL)  
4. 205-1815 Y [1] LINES GP-TILT CYLINDER (PARTIAL)  
5. 223-2450 [1] COVER  
6. 7Y-1537 M [2] LOCKNUT (M20X2.5-THD)  
7. 8C-8478 M [2] BOLT (M20X2.5X140-MM)  
8. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
9. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41200013
 

301-7382: CYLINDER & LINES GP-TILT

301-7382 CYLINDER & LINES GP-TILT -PARTIAL
S/N CKL356-UP
PART OF 290-6128, 301-7383 TILT AR-FELLING HEAD
AN ATTACHMENT
i02656729 SEBP4120
3017382 CYLINDER & LINES GP-TILT Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-9208 [1] PIN  
2. 190-2455 Y [1] CYLINDER GP-TILT (PARTIAL)  
3. 205-1815 Y [1] LINES GP-TILT CYLINDER (PARTIAL)  
4. 223-2450 [1] COVER  
5. 301-6792 [1] PIN  
6. 7Y-1537 M [2] LOCKNUT (M20X2.5-THD)  
7. 8C-8478 M [2] BOLT (M20X2.5X140-MM)  
8. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
9. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41200014
 

301-7382: CYLINDER & LINES GP-TILT

301-7382 CYLINDER & LINES GP-TILT -PARTIAL
S/N CKL356-9999; PAM100-UP
PART OF 290-6128, 301-7383, 327-2191 TILT AR-FELLING HEAD
AN ATTACHMENT
i03351984 SEBP4120
3017382 CYLINDER & LINES GP-TILT Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-9208 [1] PIN  
2. 190-2455 Y [1] CYLINDER GP-TILT (PARTIAL)  
3. 327-2196 CY [1] LINES GP-TILT CYLINDER (PARTIAL)  
4. 223-2450 [1] COVER  
5. 301-6792 [1] PIN  
6. 7Y-1537 M [2] LOCKNUT (M20X2.5-THD)  
7. 8C-8478 M [2] BOLT (M20X2.5X140-MM)  
8. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
9. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41200015
 

349-9334: CYLINDER GP-GRAPPLE

349-9334 CYLINDER GP-GRAPPLE
S/N PAM104-110; PAM112-113; PAM116-116; PAM119-UP
PART OF 327-2173 CYLINDER & LINES GP-FELLING HD
AN ATTACHMENT
i03864249 SEBP4120
3499334 CYLINDER GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1328 [2] BEARING-SELF-ALIGNING (SELF ALIGNING)  
3. 346-8939 [2] VALVE-CHECK  
4. 350-7782 [1] BARREL  
5. 350-7783 [1] ROD  
6. 364-2559 [1] PISTON  
7. 350-7785 [1] HEAD  
8. 350-7786 [1] SEAL-PISTON  
    (INCLUDES PARTS MARKED J IN GRAPHIC)
9. 350-8650 [1] SEAL-HEAD  
    (INCLUDES PARTS MARKED K IN GRAPHIC)
10. 1K-6985 [2] RING-RETAINING  
11. 346-8963 [1] LOCKNUT (1-1/4-12-THD)  
12. 2L-3793 [12] BOLT (3/8-16X2.25-IN)  
 

#SEBP41200016
 

190-0858: CYLINDER GP-HYDRAULIC

190-0858 CYLINDER GP-HYDRAULIC
S/N CKL356-615; PAM1-99
76.2-MM BORE X 262.6-MM STROKE
PART OF 183-1977, 280-2800 CYLINDER & LINES GP-FELLING HD
ALSO AN ATTACHMENT
i01402833 SEBP4120
1900858 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1328 [2] BEARING-SELF-ALIGNING  
3. 150-5311 [11] LOCKWASHER  
4. 195-8764 [1] ROD AS  
5. 195-8765 [1] HEAD  
6. 195-8766 [1] PISTON  
7. 195-8768 [1] KIT-SEAL  
    (INCLUDES RINGS, SEALS & O-RINGS)
8. 1K-6985 [2] RING-RETAINING  
9. 6V-0506 [1] RING-RETAINING  
10. 7L-0663 [11] BOLT (1/2-13X3.75-IN)  
11. 8B-7179 [1] SETSCREW-SOCKET (5/16-18X0.375-IN)  
12. 290-8151 [1] RING  
 

#SEBP41200017
 

320-5211: CYLINDER GP-HYDRAULIC

320-5211 CYLINDER GP-HYDRAULIC
S/N PAM100-103; PAM111-111; PAM114-115; PAM117-118
76.2-MM BORE X 262.6-MM STROKE
PART OF 327-2173 CYLINDER & LINES GP-FELLING HD
AN ATTACHMENT
i03337472 SEBP4120
3205211 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1328 [2] BEARING-SELF-ALIGNING  
3. 150-5311 [11] LOCKWASHER  
4. 195-8764 [1] ROD AS  
5. 195-8765 [1] HEAD  
6. 195-8766 [1] PISTON  
7. 195-8768 [1] KIT-SEAL  
    (INCLUDES RINGS & SEALS)
8. 290-8151 [1] RING  
9. 1K-6985 [2] RING-RETAINING  
10. 6V-0506 [1] RING-RETAINING  
11. 7L-0663 [11] BOLT (1/2-13X3.75-IN)  
12. 8B-7179 [1] SETSCREW-SOCKET (5/16-18X0.375-IN)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP41200018
 

190-2455: CYLINDER GP-TILT

190-2455 CYLINDER GP-TILT -PARTIAL
114.3-MM BORE X 304.8-MM STROKE
PART OF 205-1968, 301-7382 CYLINDER & LINES GP-TILT
AN ATTACHMENT
i01402969 SEBP4120
1902455 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7J-1309 [2] BEARING  
3. 155-1170 [9] LOCKWASHER  
4. 196-2421 [1] ROD AS  
5. 196-2422 [1] HEAD  
6. 196-2423 [1] PISTON  
7. 196-2425 [9] BOLT (5/8-11X1.75-IN)  
8. 196-2426 [1] KIT-SEAL  
    (INCLUDES RING-WEAR, SEALS & O-RING)
9. 2F-5325 [1] SETSCREW (3/8-16-THD)  
 

#SEBP41200019
 

305-3742: DRIVE GP-SWING

305-3742 DRIVE GP-SWING
S/N PAM119-UP
PART OF 306-2178 DRIVE GP-SWING
AN ATTACHMENT
i03911290 SEBP4120
3053742 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your HF201 FELLING HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0336 [1] FITTING-PRESSURE RELIEF  
2. 3L-9409 [1] CUP-BEARING  
3. 3L-9410 [1] CONE-BEARING  
4. 5P-8486 [1] CUP-TAPERED BEARING  
5. 6V-1579 [1] BEARING-TAPERED ROLLER  
6. 303-4201 [1] HOUSING-LOWER  
7. 303-4203 [1] HOUSING-UPPER  
8. 303-4204 [1] GEAR-SUN (12-TEETH)  
9. 303-4205 [1] CARRIER-PLANETARY  
10. 303-4206 [3] GEAR-PLANETARY (24-TEETH)  
11. 303-4208 [3] SHAFT  
12. 303-4209 [1] PLATE-RETAINER  
13. 303-4210 [1] GEAR-RING (60-TEETH)  
14. 303-4211 [1] SHAFT-PINION  
15. 303-4212 [1] LOCKNUT  
16. 304-7910 [1] SEAL-LIP TYPE  
17. 305-3733 [1] SPACER (92X162X3-MM THK)  
18. 7X-2544 M [8] BOLT (M10X1.5X140-MM)  
19. 261-3307 [2] SEAL-O-RING  
20. 299-8919 M [1] BOLT (M8X1.25X12-MM)  
21. 7X-2563 M [4] BOLT (M20X2.5X60-MM)  
22. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
24. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
25. 8T-7942 [2] DOWEL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Bearings (Cylinder Ends) - Lubricate
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Tilt Cylinder (Partial)
HF181, HF201 and HF221 Felling Heads
Hydraulic Cylinder (Grapple Arm) (Accumulator Arm)
HF181 Felling Head, HF201
Felling Head and HF221
Felling Head for Track Feller Bunchers
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Speed - Check
HF181 Felling Head, HF201
Felling Head and HF221
Felling Head for Track Feller Bunchers
Tilt Cylinder - Isolation and Drift Check
HF181 Felling Head, HF201
Felling Head and HF221
Felling Head for Track Feller Bunchers
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder - Remove and Install
HF181 Felling Head, HF201 Felling Head and HF221 Felling Head for Track Feller Bunchers
Hydraulic Cylinder (Accumulator Arm) - Remove and Install
HF181 Felling Head, HF201 Felling Head and HF221 Felling Head for Track Feller Bunchers
Hydraulic Cylinder (Grapple Arm) - Remove and Install
HF181, HF201 and HF221 Felling Heads Felling Head
Service Magazine
Guarding is Now Available for the Partial Tilt Cylinder on Felling Heads {5104}
2004/02/23
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog HF201 :

CYLINDER & LINES GP-FELLING HD
327-2173 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-FELLING HD
280-2800 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-FELLING HD
183-1977 CYLINDER & LINES GP-FELLING HD
LINES GP-GREASE
377-0029 LINES GP-GREASE
LINES GP-GREASE
306-2102 LINES GP-GREASE
LINES GP-GREASE
185-1638 LINES GP-GREASE
LINES GP-GREASE
185-1638 LINES GP-GREASE
VALVE GP-MOTOR CONTROL
192-2901 VALVE GP-MOTOR CONTROL
CYLINDER & LINES GP-FELLING HD
327-2173 CYLINDER & LINES GP-FELLING HD
CYLINDER & LINES GP-TILT
205-1968 CYLINDER & LINES GP-TILT
CYLINDER & LINES GP-TILT
301-7382 CYLINDER & LINES GP-TILT
CYLINDER & LINES GP-TILT
301-7382 CYLINDER & LINES GP-TILT
CYLINDER GP-GRAPPLE
349-9334 CYLINDER GP-GRAPPLE
CYLINDER GP-HYDRAULIC
190-0858 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
320-5211 CYLINDER GP-HYDRAULIC
CYLINDER GP-TILT
190-2455 CYLINDER GP-TILT

Truck sale:

CATERPILLAR HF-201 2008
 
CATERPILLAR HF-201 2008
- FORESTRY FELLER BUNCH HEAD
PETERSON MACHINERY CO.
CATERPILLAR HF201 2009
$55,000 USD 
CATERPILLAR HF201 2009
- FORESTRY FELLER BUNCH HEAD
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.