AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

358-6633 RAIL GP-FUEL S/N 4441-UP AN ATTACHMENT C4.4 ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

ENGINE - MACHINE C4.4 ENGINE - MACHINE 444
 C4.4 Industrial Engine 44400001-UP SEBP4124 C4.4 444   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
RAIL GP-FUEL
312-4598 RAIL GP-FUEL
RAIL GP-FUEL
318-2391 RAIL GP-FUEL
RAIL GP-FUEL
358-6633 RAIL GP-FUEL
 

#SEBP41240810
 

358-6633: RAIL GP-FUEL

358-6633 RAIL GP-FUEL
S/N 4441-UP
AN ATTACHMENT
i04020469 SEBP4124
3586633 RAIL GP-FUEL Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-5291 [1] VALVE AS-RELIEF (FUEL RAIL)  
 

#SEBP41240811
 

298-5109: ALTERNATOR GP-CHARGING

298-5109 ALTERNATOR GP-CHARGING
S/N 4441-UP
i02604346 SEBP4124
2985109 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [3] BOLT (M10X1.5X30-MM)  
3. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
4. 100-8451 M [1] BOLT (M8X1.25X130-MM)  
5. 113-6349 M [1] NUT (M8X1.25-THD)  
6. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
7. 225-3143 [1] ALTERNATOR GP-CHARGING (12-VOLT, 85-AMPERE)  
8. 261-0371 [1] PLATE  
9. 261-0406 [1] BELT TENSIONER  
10. 284-3425 [1] PULLEY-ALTERNATOR  
11. 298-4562 [1] BRACKET-ALTERNATOR  
11A. 161-9820 [2] PIN  
  M   METRIC PART
 

#SEBP41240812
 

299-5112: ALTERNATOR GP-CHARGING

299-5112 ALTERNATOR GP-CHARGING
S/N 4441-UP
24 VOLT
i02713408 SEBP4124
2995112 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
2. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
3. 6I-0454 M [1] BOLT (M10X1.5X70-MM)  
4. 175-7141 M [1] NUT-HEX FLANGE (M10X1.5-THD)  
5. 233-9532 [1] PULLEY-ALTERNATOR  
6. 067-6366 [1] WASHER  
7. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
8. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
9. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
10. 424-6821 [1] ALTERNATOR (24-VOLT, 55-AMPERE)  
11. 453-3595 [1] BRACKET  
12. 233-9531 [1] LEVER  
13. 132-8848 [1] WASHER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41240813
 

301-8244: ALTERNATOR GP-CHARGING

301-8244 ALTERNATOR GP-CHARGING
S/N 4441-UP
24 VOLT
i02635820 SEBP4124
3018244 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
2. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
3. 6I-0454 M [1] BOLT (M10X1.5X70-MM)  
4. 6I-0594 M [1] NUT (M10X1.5-THD)  
6. 067-6366 [1] WASHER  
7. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
8. 113-6349 M [1] NUT (M8X1.25-THD)  
9. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
10. 424-6821 [1] ALTERNATOR (24-VOLT, 55-AMPERE)  
11. 453-3595 [1] BRACKET  
12. 233-9531 [1] LEVER  
13. 243-4300 [1] PULLEY-ALTERNATOR  
14. 132-8848 [1] WASHER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41240814
 

303-4621: ALTERNATOR GP-CHARGING

303-4621 ALTERNATOR GP-CHARGING
S/N 4441-UP
12 VOLT, 65-AMPERE
i02635796 SEBP4124
3034621 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
2. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
3. 6I-0454 M [1] BOLT (M10X1.5X70-MM)  
4. 175-7141 M [1] NUT-HEX FLANGE (M10X1.5-THD)  
5. 243-4300 [1] PULLEY-ALTERNATOR  
6. 067-6366 [1] WASHER  
7. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
8. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
9. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
10. 339-7767 [1] ALTERNATOR GP-CHARGING (12-VOLT)  
11. 453-3595 [1] BRACKET  
12. 233-9531 [1] LEVER  
13. 132-8848 [1] WASHER  
  M   METRIC PART
 

#SEBP41240815
 

303-5774: ALTERNATOR GP-CHARGING

303-5774 ALTERNATOR GP-CHARGING
S/N 4441-UP
12 VOLT
i02654877 SEBP4124
3035774 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [3] BOLT (M10X1.5X30-MM)  
3. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
4. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
5. 113-6349 M [1] NUT (M8X1.25-THD)  
6. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
7. 383-2557 [1] ALTERNATOR (12-VOLT, 120-AMPERE)  
8. 377-9082 [1] BELT TENSIONER  
9. 390-7340 [1] PULLEY-ALTERNATOR (8-GROOVE)  
10. 339-5256 [1] BRACKET  
11. 349-3261 [1] PLATE-TENSIONER  
  M   METRIC PART
 

#SEBP41240816
 

303-8449: ALTERNATOR GP-CHARGING

303-8449 ALTERNATOR GP-CHARGING
S/N 4441-UP
12 VOLT
i02637647 SEBP4124
3038449 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [3] BOLT (M10X1.5X30-MM)  
3. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
4. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
5. 113-6349 M [1] NUT (M8X1.25-THD)  
6. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
7. 339-7767 [1] ALTERNATOR GP-CHARGING (12-VOLT)  
8. 349-3261 [1] PLATE-TENSIONER  
9. 377-9082 [1] BELT TENSIONER  
10. 390-7340 [1] PULLEY-ALTERNATOR (8-GROOVE)  
11. 339-5256 [1] BRACKET  
  M   METRIC PART
 

#SEBP41240817
 

305-2580: ALTERNATOR GP-CHARGING

305-2580 ALTERNATOR GP-CHARGING
S/N 4441-UP
24 VOLT
i02654279 SEBP4124
3052580 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
2. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
3. 6I-0454 M [1] BOLT (M10X1.5X70-MM)  
4. 175-7141 M [1] NUT-HEX FLANGE (M10X1.5-THD)  
5. 233-9532 [1] PULLEY-ALTERNATOR  
6. 067-6366 [1] WASHER  
7. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
8. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
9. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
10. 399-1485 [1] ALTERNATOR (24-VOLT, 75-AMPERE)  
11. 453-3595 [1] BRACKET  
12. 233-9531 [1] LEVER  
13. 132-8848 [1] WASHER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41240818
 

306-2320: ALTERNATOR GP-CHARGING

306-2320 ALTERNATOR GP-CHARGING
S/N 4441-UP
24-VOLT
i03427228 SEBP4124
3062320 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [3] BOLT (M10X1.5X30-MM)  
3. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
4. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
5. 113-6349 M [1] NUT (M8X1.25-THD)  
6. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
7. 399-1485 [1] ALTERNATOR (24-VOLT, 75-AMPERE)  
8. 377-9082 [1] BELT TENSIONER  
9. 390-7340 [1] PULLEY-ALTERNATOR (8-GROOVE)  
10. 305-7881 [1] BRACKET AS-ALTERNATOR  
10A. 161-9820 [2] PIN  
11. 349-3261 [1] PLATE-TENSIONER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41240819
 

306-8856: ALTERNATOR GP-CHARGING

306-8856 ALTERNATOR GP-CHARGING
S/N 4441-UP
i02735892 SEBP4124
3068856 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [1] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [3] BOLT (M10X1.5X30-MM)  
3. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
4. 359-9666 M [1] BOLT-FLANGE HEAD (M8X1.25X130-MM)  
5. 113-6349 M [1] NUT (M8X1.25-THD)  
6. 140-8783 M [2] BOLT (M10X1.5X45-MM)  
7. 424-6821 [1] ALTERNATOR (24-VOLT, 55-AMPERE)  
8. 377-9082 [1] BELT TENSIONER  
9. 390-7340 [1] PULLEY-ALTERNATOR (8-GROOVE)  
10. 305-7881 [1] BRACKET AS-ALTERNATOR  
10A. 161-9820 [2] PIN  
11. 349-3261 [1] PLATE-TENSIONER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
New Tooling for the New Air in Fuel and Fuel Pressure Test Procedures {1261, 1274, 1288, 1714}
2006/11/20
Leakage of the Fuel Injector {1251, 1290}
2007/10/01
Support for Fuel Injection Pumps {1251}
2008/07/14
Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
2010/04/30
Improved Fuel Injection Pump Timing Tool {1251}
2009/01/26
New Pressure Relief Valve {1251, 1715}
2008/12/01
Diagnostic Process for Fuel Rail Pressure Sensor {127A, 1439}
2009/08/31
Improved Servicing is Available for the Fuel Injection Pump for C6.6 and C4.4 Engines {1251, 1256, 1290, 1714}
2010/11/22
Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
2010/01/08
Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/01/14
New Fuel Injection Pump for Certain C6.6 and C4.4 Engines {1251, 1290}
2010/03/31
New Fuel Manifold (Rail) for C6.6 and C4.4 Engines {1288}
2010/12/13
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
Removal and Installation of Electronic Unit Injectors{1290}
Removal and Installation of Electronic Unit Injectors{1290}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Servicing the Outlet Check Plugs on the Fuel Injection Pump on C6.6 and C4.4 Engines{1251, 1290}
Servicing the Outlet Check Plugs on the Fuel Injection Pump on C6.6 and C4.4 Engines{1251, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fuel Injection Pump
C4.4 Industrial Engine
Fuel Injection Nozzles
C4.4 Industrial Engine
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
Service Letter-Asia
Systems Operation
Fuel Injection
C4.4 Industrial Engine
Information Release Memo
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
Testing and Adjusting
Fuel Injection Timing - Check
C4.4 Industrial Engine
Troubleshooting
CID 0001 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0001 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0002 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0002 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0003 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0003 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0004 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0004 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
Injector Solenoid Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 1779 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 1779 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
Injector Trim File
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
Fuel Rail Pump Solenoid - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0005 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0005 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0005 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0005 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0006 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0006 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0006 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0006 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
Injector Data Incorrect - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0001 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0001 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0002 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0003 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0004 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0002 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0003 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
CID 0004 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines
Disassembly and Assembly
Electronic Unit Injector - Remove
C4.4 Industrial Engine
Electronic Unit Injector - Install
C4.4 Industrial Engine
Fuel Injection Pump - Install
C4.4 Industrial Engine
Fuel Injection Pump - Remove
C4.4 Industrial Engine
Fuel Injection Pump Gear - Install
C4.4 Industrial Engine
Fuel Injection Pump Gear - Remove
C4.4 Industrial Engine
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog C4.4 :

RAIL GP-FUEL
318-2391 RAIL GP-FUEL
RAIL GP-FUEL
312-4598 RAIL GP-FUEL
RAIL GP-FUEL
280-0683 RAIL GP-FUEL
PUMP GP-FUEL INJECTION
368-9172 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
353-7341 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
353-7341 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
353-7341 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
352-6584 PUMP GP-FUEL INJECTION
ALTERNATOR GP-CHARGING
298-5109 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
299-5112 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
301-8244 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
303-4621 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
303-5774 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
303-8449 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
305-2580 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
306-2320 ALTERNATOR GP-CHARGING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.