AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

440-3361 STARTING MOTOR GP-ELECTRIC 24-VOLT PART OF 442-8949 STARTING MOTOR GP-ELECTRIC FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@ AN ATTACHMENT C11


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE C11 INDUSTRIAL ENGINE GLS
 C11 Industrial Engine GLS00001-UP SEBP4127 C11 GLS   (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
435-1239 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
435-1240 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
440-3361 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8945 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8946 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8948 STARTING MOTOR GP-ELECTRIC
 

#SEBP41270770
 

440-3361: STARTING MOTOR GP-ELECTRIC

440-3361 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 442-8949 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i07330231 SEBP4127
4403361 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SEALS, GASKET, NUT, & RETAINER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATOR TERMINALS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES NUTS, BOLTS, CONNECTORS & INSTRUCTION SHEET)
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
31. 7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
32. 419-7866 [1] SEAL-STARTER  
 

#SEBP41270771
 

442-8945: STARTING MOTOR GP-ELECTRIC

442-8945 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i05380714 SEBP4127
4428945 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
 

#SEBP41270772
 

442-8946: STARTING MOTOR GP-ELECTRIC

442-8946 STARTING MOTOR GP-ELECTRIC
24V, LH STARTER
AN ATTACHMENT
i05380710 SEBP4127
4428946 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 435-1239 Y [1] STARTING MOTOR GP-ELECTRIC  
3. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41270773
 

442-8948: STARTING MOTOR GP-ELECTRIC

442-8948 STARTING MOTOR GP-ELECTRIC
24VOLT, LH STARTER
AN ATTACHMENT
i05380725 SEBP4127
4428948 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 9F-4337 [1] WIRE AS  
3. 435-1240 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41270774
 

442-8949: STARTING MOTOR GP-ELECTRIC

442-8949 STARTING MOTOR GP-ELECTRIC
DUAL 24 VOLT, 42 MOUNT STARTER CONFIGURATION
FOR USE WITH FLYWHEEL HOUSINGS
AN ATTACHMENT
i05371220 SEBP4127
4428949 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 9F-4337 [1] WIRE AS  
3. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
4. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
6. 440-3361 Y [1] STARTING MOTOR GP-ELECTRIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41270775
 

527-7466: STARTING MOTOR GP-ELECTRIC

527-7466 STARTING MOTOR GP-ELECTRIC
PROVIDE A LEFT HAND MOUNTED 42MT STARTER WITH GROUND STRAP
AN ATTACHMENT
i07000189 SEBP4127
5277466 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(28-CM)  
3. 207-1562 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
5. 5C-7261 M [1] NUT (M8X1.25-THD)  
6. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 7X-0591 [3] WASHER-HARD (17X29X3-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41270776
 

6V-0885: STARTING MOTOR GP-ELECTRIC

6V-0885 STARTING MOTOR GP-ELECTRIC
S/N HRA1-UP; GLS1-3990
24-VOLT
PART OF 7N-1059 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@352-9767@@@@@, @@@@@ 6V-0890@@@@@, @@@@@338-3454@@@@@
AN ATTACHMENT
i02092947 SEBP4127
6V0885 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
7A. 3T-3424 [1] PLUG-FELT  
7B. 3T-3423 [1] CUP  
7C. 9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 9F-5599 [12] LOCKWASHER  
8B. 6T-0371 [1] INSULATOR  
8C. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8D. 3T-9494 [1] SPRING (STARTING MOTOR BRUSH)  
8E. 3T-4709 [3] PLATE  
8F. 3T-4710 [3] PLATE  
8G. 2L-6679 [3] PLATE-INSULATOR  
8H. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8J. 6T-0372 [1] PLATE  
8K. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 4M-1827 [1] RETAINER-SPRING  
20. 9M-7609 [1] SPRING (SHIFT LEVER)  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6535 [1] COVER-STARTING MOTOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR BRUSH)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
55. 3T-3424 [2] PLUG-FELT  
56. 3T-3423 [2] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
63. 7T-9123 [1] GASKET-PLATE  
64. 125-6536 [1] TERMINAL AS  
65. 338-3453 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP41270777
 

6V-0890: STARTING MOTOR GP-ELECTRIC

6V-0890 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0927@@@@@, @@@@@ 6V-0885@@@@@
i02039547 SEBP4127
6V0890 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  9G-4101 [1] BUSHING-END  
  3T-3424 [1] PLUG-FELT  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING (STARTING MOTOR)  
9. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 4M-1829 [1] BOOT-RUBBER  
20. 9M-7609 [1] SPRING (SHIFT LEVER)  
21. 4M-1827 [1] RETAINER-SPRING  
22. 8C-3089 [1] SEAL-O-RING  
23. 4M-1853 [1] LEVER AS-SHIFT  
24. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
25. 7L-2894 [4] GASKET  
26. 4M-1831 [4] PLUG-LEVER HOUSING  
27. 4M-1854 [1] SHAFT-LEVER  
28. 1H-1023 [1] SEAL-O-RING  
29. 2D-6392 [1] SEAL-O-RING  
30. 7T-3974 [1] HOUSING AS-DRIVE  
31. 6N-3826 [1] DRIVE AS-MOTOR  
32. 2H-3429 [2] RING-RETAINING (EXTERNAL)  
33. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
34. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 6N-3279 [1] INSULATOR  
36. 036-9823 [13] BOLT (1/4-28X1-IN)  
37. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
38. 1H-2629 [3] STRIP-INSULATION  
39. 7M-0324 [1] COIL AS-FIELD  
40. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
41. 7F-3488 [6] SHOE-POLE  
42. 7M-8651 [1] ARMATURE AS  
43. 7M-0325 [1] INSULATOR  
44. 3T-9524 [6] BRUSH AS  
45. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES INSULATOR, BUSHINGS & WASHER)
46. 125-6537 [1] INSULATOR  
47. 3R-8801 [1] CLAMP  
48. 8F-1434 [2] LOCKWASHER  
49. 6V-8188 [6] NUT (1/2-13-THD)  
50. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
51. 4B-2049 [6] NUT (10-32-THD)  
52. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
53. 3T-9494 [6] SPRING (STARTING MOTOR)  
54. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
55. 9G-4101 [1] BUSHING-END  
56. 3T-3424 [3] PLUG-FELT  
57. 3T-3423 [3] CUP  
58. 1M-9968 [1] BUSHING  
59. 2F-6678 [1] SEAL-LIP TYPE  
60. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
61. 4M-1896 [1] BUSHING-TERMINAL  
62. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
67. 125-6535 [1] COVER-STARTING MOTOR  
68. 7T-9123 [1] GASKET-PLATE  
69. 125-6536 [1] TERMINAL AS  
70. 238-1851 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP (BOOT)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP41270778
 

6V-0927: STARTING MOTOR GP-ELECTRIC

6V-0927 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 2S-7227 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
AN ATTACHMENT
i00068501 SEBP4127
6V0927 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  9G-4101 [1] BUSHING-END  
  3T-3424 [1] PLUG-FELT  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 4M-1827 [1] RETAINER-SPRING  
20. 9M-7609 [1] SPRING (SHIFT LEVER)  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING (EXTERNAL)  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR BRUSH)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 125-6536 [1] TERMINAL AS  
65. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP41270779
 

7N-1059: STARTING MOTOR GP-ELECTRIC

7N-1059 STARTING MOTOR GP-ELECTRIC
S/N HRA1-UP; GLS1-3990
24 VOLT
AN ATTACHMENT
i00089703 SEBP4127
7N1059 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C11 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4H-7869 [1] GASKET  
3. 6V-0885 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)(COLD WEATHER)  
4. 105-4728 [1] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Cat<SUP>&reg;</SUP> Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/08
Operation and Maintenance Manual
Starting Motor - Inspect
C11 and C13 Industrial Engines
Cold Weather Starting
C11 and C13 Industrial Engines
Starting the Engine
C11 and C13 Industrial Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Electric Starting System - Test
C11 and C13 Industrial Engines
Pinion Clearance - Adjust
C11 and C13 Industrial Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C11 and C13 Industrial Engines

Caterpillar Parts SIS Catalog C11 :

STARTING MOTOR GP-ELECTRIC
435-1240 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
435-1239 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9935 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9848 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9767 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9765 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8945 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8946 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8948 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
442-8949 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
527-7466 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-0885 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-0890 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-0927 STARTING MOTOR GP-ELECTRIC

Truck sale:

 
 
CAT C11

Machinery Auctioneers
Odessa, Texas
2014 CAT C11
USD $29,500 
2014 CAT C11

React Power Solutions
Houston, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.