AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

352-9765 STARTING MOTOR GP-ELECTRIC 12-VOLT, 50 MT PART OF 153-7290 STARTING MOTOR GP-ELECTRIC AN ATTACHMENT C13


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE C13 INDUSTRIAL ENGINE LGK
 C13 Industrial Engine LGK00001-UP SEBP4130 C13 LGK   (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
344-3543 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9765 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9767 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9848 STARTING MOTOR GP-ELECTRIC
 

#SEBP41300970
 

352-9765: STARTING MOTOR GP-ELECTRIC

352-9765 STARTING MOTOR GP-ELECTRIC
12-VOLT, 50 MT
PART OF 153-7290 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04047142 SEBP4130
3529765 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
2. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
3. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
4. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
5. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
6. 2J-8163 [2] SEAL-O-RING  
7. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
8. 3T-3434 [6] PLUG  
9. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
10. 3L-3380 [1] BUSHING-TERMINAL  
11. 8C-3089 [1] SEAL-O-RING  
12. 4M-1853 [1] LEVER AS-SHIFT  
13. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
14. 7L-2894 [4] GASKET  
15. 4M-1831 [4] PLUG-LEVER HOUSING  
16. 4M-1854 [1] SHAFT-LEVER  
17. 1H-1023 [1] SEAL-O-RING  
18. 2D-6392 [1] SEAL-O-RING  
19. 7T-3974 [1] HOUSING AS-DRIVE  
20. 6N-3826 [1] DRIVE AS-MOTOR  
21. 2H-3429 [1] RING-RETAINING  
22. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
23. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 0S-1597 [13] BOLT (1/4-28X1-IN)  
25. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
26. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (KIT INCLUDES PLASTIC BUSHING, RUBBER BUSHING & INSULATED WASHERS)
27. 362-5020 [1] SOLENOID AS-STARTING MOTOR (12-VOLT)  
28. 3R-8801 [1] CLAMP  
29. 8F-1434 [2] LOCKWASHER  
30. 6V-8188 [6] NUT (1/2-13-THD)  
31. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
32. 4B-2049 [6] NUT (10-32-THD)  
33. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
34. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
35. 9G-4101 [1] BUSHING-END  
36. 3T-3424 [3] PLUG-FELT  
37. 3T-3423 [3] CUP  
38. 1M-9968 [1] BUSHING  
39. 2F-6678 [1] SEAL-LIP TYPE  
40. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
41. 4M-1896 [1] BUSHING-TERMINAL  
42. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
44. 125-6535 [1] COVER-STARTING MOTOR  
 

#SEBP41300971
 

352-9766: STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 2S-7227 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04040907 SEBP4130
3529766 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG (FELT)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 528-6787 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 351-8955 [1] SEAL-O-RING  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41300972
 

352-9767: STARTING MOTOR GP-ELECTRIC

352-9767 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 7N-1059 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@
AN ATTACHMENT
i03997313 SEBP4130
3529767 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHER)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41300973
 

352-9848: STARTING MOTOR GP-ELECTRIC

352-9848 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 352-9935 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
ALSO AN ATTACHMENT
i03955138 SEBP4130
3529848 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
7A. 9G-4101 [1] BUSHING-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41300974
 

352-9935: STARTING MOTOR GP-ELECTRIC

352-9935 STARTING MOTOR GP-ELECTRIC
24-VOLT. LH STARTER CONFIGURATION
FOR USE WITH @@@@@222-3090@@@@@, @@@@@245-0224@@@@@, @@@@@264-4643@@@@@
ALSO AN ATTACHMENT
i04040320 SEBP4130
3529935 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 170-9328 [1] STRAP AS-GROUND  
3. 352-9848 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
5. 5C-7261 M [1] NUT (M8X1.25-THD)  
6. 8F-7242 [2] WASHER (8.7X15.9X1.6-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP41300975
 

356-3978: STARTING MOTOR GP-ELECTRIC

356-3978 STARTING MOTOR GP-ELECTRIC
24-VOLT
ALSO AN ATTACHMENT
i04007389 SEBP4130
3563978 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 415-1804 [1] STARTING MOTOR GP-ELECTRIC  
3. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41300976
 

435-1239: STARTING MOTOR GP-ELECTRIC

435-1239 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 442-8946 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i05371950 SEBP4130
4351239 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS (STARTING MOTOR)  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR (STARTER)  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS (STARTING MOTOR)  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES FASTENERS & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULTORSS & BUSHING)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)
33. 419-7866 [1] SEAL-STARTER  
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BRUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)
 

#SEBP41300977
 

435-1240: STARTING MOTOR GP-ELECTRIC

435-1240 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 442-8948 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i05362705 SEBP4130
4351240 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 125-6535 [1] COVER-STARTING MOTOR  
58. 419-7866 [1] SEAL-STARTER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41300978
 

440-3361: STARTING MOTOR GP-ELECTRIC

440-3361 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 442-8949 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i07330231 SEBP4130
4403361 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SEALS, GASKET, NUT, & RETAINER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATOR TERMINALS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES NUTS, BOLTS, CONNECTORS & INSTRUCTION SHEET)
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
31. 7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
32. 419-7866 [1] SEAL-STARTER  
 

#SEBP41300979
 

442-5250: STARTING MOTOR GP-ELECTRIC

442-5250 STARTING MOTOR GP-ELECTRIC
LH, 12-VOLT, 42MT MOTOR
CANNOT BE USED WITH ANY OTHER APPLICATION
AN ATTACHMENT
i05393993 SEBP4130
4425250 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 170-9328 [1] STRAP AS-GROUND  
3. 287-7136 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
5. 5C-7261 M [1] NUT (M8X1.25-THD)  
6. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/08
Operation and Maintenance Manual
Starting Motor - Inspect
C11 and C13 Industrial Engines
Cold Weather Starting
C11 and C13 Industrial Engines
Starting the Engine
C11 and C13 Industrial Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Specifications
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Electric Starting Motor
C11 and C13 Industrial Engines
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Electric Starting System - Test
C11 and C13 Industrial Engines
Pinion Clearance - Adjust
C11 and C13 Industrial Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C11 and C13 Industrial Engines

Caterpillar Parts SIS Catalog C13 :

STARTING MOTOR GP-ELECTRIC
344-3543 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
322-8304 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
293-4853 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
287-7136 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
285-8378 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9767 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9848 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9935 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
356-3978 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
435-1239 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
435-1240 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
440-3361 STARTING MOTOR GP-ELECTRIC

Truck sale:

Caterpillar C13, Construction
25,800 
Caterpillar C13, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C13, Construction
27,300 
Caterpillar C13, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
 
 
Caterpillar C13, Construction
- Stationary Generator Sets
STET, SA
Portugal
Caterpillar C13, Construction
68,500 
Caterpillar C13, Construction
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS
CATERPILLAR C13 2014
 
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.