105-1457 VOLTMETER GP 24-VOLT AN ATTACHMENT C13 INDUSTRIAL ENGINE

OPERATOR STATION

PANEL GP

0. 105-1457 VOLTMETER
1. 275-2110 VOLTMETER

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

2. 6L-4502 CHART-PLAT

SHIPPING GP

3. 9Y-9238 COVER GP-S

GASKET & SEAL KITS

4. 265-5327 KIT-GASKET
5. 316-2536 KIT-GASKET
6. 363-4540 KIT-GASKET
7. 473-2595 KIT-GASKET
8. 473-6786 KIT-GASKET

CHARTS & FILMS

9. 360-5381 PLATE & FI
0. INFORMATION

INDUSTRIAL ENGINE C13 INDUSTRIAL ENGINE LGK
C13 Industrial Engine LGK00001-UP SEBP4130 C13 LGK (2004)

OPERATOR STATION

PANEL GP

341-7344 PANEL GP-INSTRUMENT

104-5687 VOLTMETER GP

105-1457 VOLTMETER GP

275-2110 VOLTMETER GP

#SEBP41301080

105-1457: VOLTMETER GP

VOLTMETER GP

105-1457 VOLTMETER GP
24-VOLT
AN ATTACHMENT

i00477924 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8368	[2]	NUT (6-32-THD)
2.	4B-5324	[2]	WASHER (3.9X9.6X1.2-MM THK)
3.	3L-8187	[2]	LOCKWASHER
4.	4B-2043	[2]	NUT (8-32-THD)
5.	9B-7233	[2]	LOCKWASHER

#SEBP41301081

275-2110: VOLTMETER GP

VOLTMETER GP

275-2110 VOLTMETER GP
9-32-VOLT DC
PART OF 266-2296, 341-7344 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT

i02425712 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
6V-3507 AF	[1]	SEAL-RECTANGULAR
		(SEAL SHOULD BE INSTALLED BETWEEN INDICATOR AS & MOUNTING PANEL)
357-6583 AF	[1]	KIT-BRACKET
		(INCLUDES 2 BRASS STUDS, 4 BRASS NUTS WITH CAPTIVE LOCK WASHERS & 2 ALUMINUM 'L' BRACKETS)
A		NOT PART OF THIS GROUP
F		NOT SHOWN

#SEBP41301082

6L-4502: CHART-PLATE & FILM

CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM

i02139133 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
118-2136	[1]	FILM-INFORMATION (3176-IND MAINT)
		INSTALL ON CENTER VALVE COVER READABLE FROM REAR OF ENGINE
9Y-4294	[2]	FILM-WARNING (ELEC SHOCK HAZARD, UNIT INJ)
		INSTALL ONE TOWARDS FRONT OF ENGINE ON LEFT & RIGHT HAND SIDES OF VALVE COVER BASE
228-3581	[2]	FILM-WARNING (DO NOT OPERATE, READ OMM)
		INSTALL ONE TOWARDS LEFT & ONE ON RIGHT OF VALVE COVER BASE
229-5666	[1]	PLATE (C13 ACERT)
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		CONTACT YOUR LOCAL DEALER
		INSTALL ON RIGHT SIDE OF VALVE BASE AS CLOSE AS POSSIBLE TO THE REAR OF THE ENGINE
		READABLE FROM RIGHT SIDE OF ENGINE
		INSTALL LAMINANT OVER SILVER FILM, SUCH THAT BOTTOM EDGE OF FILM IS COVERED
290-3785	[1]	PLATE-IDENTIFICATION (CAT C13 ACERT)
		INSTALL CENTER OF VALVE COVER TO READ FROM LEFT SIDE OF ENGINE
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		CONTACT YOUR LOCAL DEALER
		INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON RH SIDE OF CYLINDER BLOCK
		CHECK TO SEE IF SERIAL NUMBER IS STAMPED IN BLOCK BELOW PLATE

#SEBP41301083

9Y-9238: COVER GP-SHIPPING

COVER GP-SHIPPING

9Y-9238 COVER GP-SHIPPING -FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT

i00433962 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	7N-7827	[1]	COVER-FLYWHEEL HOUSING
	4P-2543	[4]	FASTENER

#SEBP41301084

265-5327: KIT-GASKET

KIT-GASKET

265-5327 KIT-GASKET -WATER PUMP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION

i05946788 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
224-2675	[1]	SEAL
229-8810	[1]	SEAL
6V-3251	[3]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
6V-5064	[1]	SEAL-O-RING
6V-7350	[1]	SEAL-O-RING
6V-9027	[2]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
225-7003	[1]	SEAL-O-RING
226-3571	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP41301085

316-2536: KIT-GASKET

KIT-GASKET

316-2536 KIT-GASKET -WATER PUMP
S/N LGK1-UP
FIELD INSTALLATION

i06109992 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
227-5075	[1]	SEAL
229-8810	[1]	SEAL
6V-3251	[4]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
6V-7350	[1]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
7M-8485	[2]	SEAL-O-RING
225-7003	[1]	SEAL-O-RING
238-5084	[1]	SEAL-O-RING

#SEBP41301086

363-4540: KIT-GASKET

KIT-GASKET

363-4540 KIT-GASKET -TURBOCHARGER
THE FOLLOWING TURBOCHARGER MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBOCHARGER(S) AND ATTACHED LINES. APPLIES TO TURBOCHARGER KIT PART NUMBER 317-8751-UP
FIELD INSTALLATION

i05873615 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
274-6851	[1]	GASKET-TURBOCHARGER
9X-6620 M	[4]	LOCKNUT (M10X1.5-THD)
2M-9780	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
033-6033	[1]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP41301087

473-2595: KIT-GASKET

KIT-GASKET

473-2595 KIT-GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@367-9597@@@@@, @@@@@368-4897@@@@@, @@@@@368-4900@@@@@
FIELD INSTALLATION

i06249304 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
9Y-1758	[1]	GASKET (CRANKCASE BREATHER)
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
221-9392	[1]	GASKET (CYLINDER HEAD)
283-2238	[6]	GASKET (EXHAUST MANIFOLD)
230-3518	[1]	GASKET-MANIFOLD
274-6851	[1]	GASKET-TURBOCHARGER
212-7728	[10]	ISOLATOR AS
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
224-6361	[1]	SEAL
227-5075	[1]	SEAL
272-0389	[1]	SEAL
321-5639	[1]	SEAL
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
5P-5598	[1]	SEAL-O-RING
6V-5063	[7]	SEAL-O-RING
6V-6353	[1]	SEAL-O-RING
6V-6609	[5]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
9X-7380	[1]	SEAL-O-RING
214-7566	[4]	SEAL-O-RING
214-7568	[12]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
238-5080	[3]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
229-5711	[1]	SEAL-VALVE COVER
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP41301088

473-6786: KIT-GASKET

KIT-GASKET

473-6786 KIT-GASKET -CENTRAL, LOWER STRUCTURE
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
FOR USE WITH @@@@@368-4893@@@@@, @@@@@368-4894@@@@@, @@@@@368-4895@@@@@, @@@@@368-4898@@@@@, @@@@@368-4916@@@@@, @@@@@388-2114@@@@@
FIELD INSTALLATION

i06195608 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
157-0670	[1]	CAP-DUST
217-3674	[14]	FASTENER AS
209-7309	[3]	PLUG
217-3673	[1]	SEAL-ISOLATION
3J-7354	[2]	SEAL-O-RING
5P-8211	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
061-9455	[3]	SEAL-O-RING
061-9458	[3]	SEAL-O-RING
131-3718	[1]	SEAL-O-RING
214-7566	[7]	SEAL-O-RING
214-7568	[3]	SEAL-O-RING
228-4947	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
238-5084	[3]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP41301089

360-5381: PLATE & FILM GP

PLATE & FILM GP

360-5381 PLATE & FILM GP
ALSO AN ATTACHMENT

i04371333 SEBP4130

For full view, you need register

Parts for your C13 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
2.	293-9659	[2]	FILM-WARNING (UNIVERSAL, READ OMM)
3.	8L-8413	[1]	STRAP-CABLE (WHITE)
4.	9Y-4294	[2]	FILM-WARNING (ELEC SHOCK HAZARD, UNIT INJ)
5.	290-3785	[1]	PLATE-IDENTIFICATION (CAT C13 ACERT)