OPERATOR STATION
PANEL GPGENERATORS
REGULATOR GP-VOLTAGEOPERATOR STATION
PANEL GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSBASIC ENGINE
PARTS GP-MISCELLANEOUSSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSOPERATOR STATION
PANEL GP
#SEBP41370370
317-4963: PANEL GP-CONTROL
317-4963 PANEL GP-CONTROL
S/N SJB1-UP
FOR USE WITH 24 VOLT ELECTRICAL SYSTEMS ONLY
AN ATTACHMENT
S/N SJB1-UP
FOR USE WITH 24 VOLT ELECTRICAL SYSTEMS ONLY
AN ATTACHMENT
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | ||
| 317-4937 | [1] | BOX AS | ||
| 273-4282 | [1] | BUTTON-STOP | ||
| 291-1748 | [1] | CAPACITOR | ||
| 317-4941 | [1] | CONNECTOR | ||
| 273-4283 | [1] | CONTACT AS | ||
| 317-4938 | [1] | CONTROLLER | ||
| 317-4939 | [1] | FILM-IDENTIFICATION (PANEL LIGHTS) | ||
| 144-3852 | [1] | FILM-INFORMATION (BATTERY POWER DISCONNECT) | ||
| 291-1743 | [1] | HARNESS AS-PANEL | ||
| 317-4943 | [1] | HARNESS AS-PANEL | ||
| 317-4944 | [1] | HARNESS AS-WIRING | ||
| 317-4951 | [4] | HOUSING-LED | ||
| 317-4952 | [1] | HOUSING-LED | ||
| 290-5533 | [1] | KEY-LOCK (CIRCUIT BREAKER) | ||
| 317-4959 | [2] | LAMP-LED (24-VOLT, AMBER) | ||
| 317-4960 | [1] | LAMP-LED (24-VOLT, RED) | ||
| 317-4961 | [1] | LAMP-LED (24-VOLT, BLUE) | ||
| 317-4946 | [2] | LENS-AMBER | ||
| 317-4954 | [1] | LENS-BLACK | ||
| 317-4950 | [1] | LENS-BLUE | ||
| 317-4948 | [1] | LENS-RED | ||
| 178-9983 M | [10] | LOCKNUT (M4X0.7-THD) | ||
| 196-0327 | [4] | LOCKNUT (M3X0.5-THD) | ||
| 317-4956 | [4] | MOUNT-FLEXIBLE | ||
| 6I-0291 M | [8] | NUT (M8X1.25-THD) | ||
| 317-4942 | [1] | NUT-LOCKING | ||
| 307-3489 | [1] | PILLAR | ||
| 243-4630 | [5] | RELAY (24-VOLT)(RUN, 24-VOLT) | ||
| 8U-7803 M | [6] | SCREW | ||
| 317-4957 | [4] | SCREW-BUTTON HEAD | ||
| 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | ||
| 095-0730 M | [10] | SCREW-MACHINE (M4X0.7X18-MM) | ||
| 305-3659 | [1] | SHROUD | ||
| 196-0271 | [4] | SPACER (8.5X14.3X8-MM THK) | ||
| 317-4953 | [1] | SWITCH (SINGLE POLE) | ||
| 196-0346 | [2] | WASHER (19X10X1.9-MM THK) | ||
| 196-0347 | [10] | WASHER (4.3X8.7X0.8-MM THK) | ||
| 199-1191 | [4] | WASHER (3.3X7X0.8-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41370371
129-0308: POTENTIOMETER
129-0308 POTENTIOMETER
S/N C9J1-UP
2000 VOLT, 2 WATT. PROVIDES A 10 TURN VOLTAGE ADJUSTMENT POTENTIOMETER FOR USE WITH VOLTAGE REGULATOR
AN ATTACHMENT
S/N C9J1-UP
2000 VOLT, 2 WATT. PROVIDES A 10 TURN VOLTAGE ADJUSTMENT POTENTIOMETER FOR USE WITH VOLTAGE REGULATOR
AN ATTACHMENT
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP41370372
262-4924: VOLTMETER GP
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS#SEBP41370373
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
S/N SJB1-UP
S/N SJB1-UP
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS#SEBP41370374
249-7751: KIT-ENGINE PARTS
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 213-3190 | [1] | BEARING (PISTON) | ||
| 151-2939 | [1] | BEARING-MAIN | ||
| 203-5805 | [1] | BUSHING (CAMSHAFT) | ||
| 203-6090 | [1] | BUSHING (CAMSHAFT) | ||
| 216-5586 | [1] | BUSHING (CAMSHAFT) | ||
| 8C-4984 M | [5] | BOLT (M8X1.25X150-MM) | ||
| 175-0454 M | [2] | BOLT (M16X2X160-MM) | ||
| 183-5163 M | [26] | BOLT (M16X2X180-MM) | ||
| 235-9651 M | [2] | BOLT-SOCKET HEAD (M8X1.25X65-MM) | ||
| 197-9345 | [1] | CROWN AS-PISTON | ||
| [1] | CYLINDER HEAD AS | |||
| 7M-7273 | [1] | GASKET | ||
| 187-1315 | [1] | GASKET AS | ||
| 2W-8147 | [1] | GEAR (50-TEETH) | ||
| 224-3247 | [1] | GEAR (100-TEETH) | ||
| 205-1320 | [1] | GEAR AS-IDLER (50-TEETH) | ||
| 260-4856 | [4] | GUIDE-VALVE | ||
| 242-0857 | [1] | INJECTOR GP-FUEL | ||
| 1B-8705 | [2] | KEY-WOODRUFF | ||
| 2A-4429 | [8] | LOCK-RETAINER | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 166-3648 | [1] | PIN-PISTON | ||
| 246-3150 | [2] | PLATE-THRUST | ||
| 9S-8004 | [5] | PLUG (9/16-18-THD)(CYLINDER HEAD) | ||
| 9S-8005 | [2] | PLUG (3/4-16-THD)(CYLINDER HEAD) | ||
| 9S-8010 | [2] | PLUG (CYLINDER HEAD) | ||
| 2A-3746 | [1] | PLUG-CUP (CYLINDER HEAD) | ||
| 3B-0623 | [3] | PLUG-CUP (CYLINDER HEAD) | ||
| 8M-5860 | [3] | PLUG-CUP (CYLINDER HEAD) | ||
| 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD)(CYLINDER HEAD) | ||
| 211-2134 | [4] | RETAINER (VALVE) | ||
| 161-3424 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 168-7211 | [1] | RING-PISTON (OIL CONTROL) | ||
| 197-9392 | [1] | RING-PISTON (TOP) | ||
| 7X-2908 | [2] | RING-RETAINING (PISTON) | ||
| 160-8199 | [1] | ROD AS (PISTON) | ||
| 169-8598 | [1] | SEAL-O-RING (FUEL SYSTEM) | ||
| 3K-0360 | [2] | SEAL-O-RING (CYLINDER HEAD) | ||
| 109-3207 | [1] | SEAL-O-RING (FUEL SYSTEM) | ||
| 148-2903 | [1] | SEAL-O-RING (FUEL SYSTEM) | ||
| 153-4906 | [5] | SEAL-O-RING (CYLINDER HEAD) | ||
| 183-2317 | [2] | SEAL-O-RING (CYLINDER HEAD) | ||
| 163-2478 | [4] | SEAL-VALVE STEM | ||
| 217-0609 | [2] | SEAT-VALVE SPRING (VLV SPRING) | ||
| 238-2709 | [1] | SKIRT-PISTON | ||
| 190-6115 | [4] | SPRING-VALVE (INNER) | ||
| 190-6117 | [4] | SPRING-VALVE (OUTER) | ||
| 241-9059 | [1] | TURBOCHARGER GP | ||
| 188-3122 | [2] | VALVE-EXHAUST | ||
| 187-4123 | [2] | VALVE-INLET | ||
| 9X-8268 | [28] | WASHER (17.5X30X3.5-MM THK) | ||
| 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP41370375
293-8267: KIT-GASKET
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| INCLUDES 2 SEALS | ||||
#SEBP41370376
361-3834: KIT-GASKET
361-3834 KIT-GASKET
S/N SJB1-UP
CONTAINS GASKET, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FIELD INSTALLATION
S/N SJB1-UP
CONTAINS GASKET, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FIELD INSTALLATION
For full view, you need register
#SEBP41370377
361-3835: KIT-GASKET
361-3835 KIT-GASKET
S/N SJB1-UP
CONTAINS GASKETS SEALS,AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
S/N SJB1-UP
CONTAINS GASKETS SEALS,AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
For full view, you need register
#SEBP41370378
361-3836: KIT-GASKET
361-3836 KIT-GASKET
S/N SJB1-UP
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
S/N SJB1-UP
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
For full view, you need register
#SEBP41370379
361-3837: KIT-GASKET
361-3837 KIT-GASKET
S/N SJB1-UP
CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. TURBO. MOUTING HARDWARE BOLTS, NUTS, STUDS, WASHERS AND SPACERS.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
S/N SJB1-UP
CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. TURBO. MOUTING HARDWARE BOLTS, NUTS, STUDS, WASHERS AND SPACERS.
FOR USE WITH GS280AT ENGINE S/N C9J1-UP, C9Z1-UP, MACHINE S/N SJB1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your C9 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7M-7273 | [1] | GASKET (TURBOCHARGER) | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 187-1315 | [1] | GASKET AS (CYLINDER HEAD) | ||
| 192-2133 | [1] | GASKET-EXHAUST MANIFOLD | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 4G-4972 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 7F-8268 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 310-7255 | [6] | SEAL-O-RING | ||
| 310-7257 | [6] | SEAL-O-RING | ||
| 268-3490 | [1] | SEAL-VALVE COVER | ||
| 285-4106 | [1] | SEAL-VALVE COVER | ||
| 163-2478 | [24] | SEAL-VALVE STEM (EXHAUST) | ||
| M | METRIC PART | |||
