ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADEHARNESS GP
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE
#SEBP41390260
339-2029: GRADE CONTROL AR-SATELLITE
339-2029 GRADE CONTROL AR-SATELLITE -SINGLE GNSS
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
FIELD INSTALLATION
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 324-3309 Y | [1] | MOUNTING GP-MONITOR | ||
| 339-2038 Y | [1] | MOUNTING GP-SENSOR (LINKAGE) | ||
| 339-2044 Y | [1] | SENSOR & MOUNTING GP (ANGLE) | ||
| 204-3461 Y | [1] | WIRING GP-GRADE CONTROL (SENSOR) | ||
| 339-2041 Y | [1] | WIRING GP-GRADE CONTROL (DISPLAY) | ||
| 339-2039 | [1] | MONITOR GP (LIGHT BAR) | ||
| 244-1720 | [3] | MONITOR AS (LIGHT BAR) | ||
| 339-2037 | [1] | MOUNTING GP-SENSOR (CHASSIS) | ||
| [1] | BRACKET AS | |||
| 349-6070 | [1] | CABLE AS (SENSOR) | ||
| 339-2040 | [1] | SENSOR & MOUNTING GP (ROLL) | ||
| 8T-2396 M | [2] | BOLT (M6X1X60-MM) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC) | ||
| 339-2042 | [1] | SENSOR & MOUNTING GP (LINKAGE) | ||
| 265-9492 | [1] | JUNCTION BOX (GPS) | ||
| 312-0754 | [3] | SENSOR AS-ANGLE (AS450C) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41390261
339-2030: GRADE CONTROL GP-LASER
339-2030 GRADE CONTROL GP-LASER
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
FIELD INSTALLATION
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | ||
| 322-0221 | [1] | BRACKET-HOUSING | ||
| 338-2744 | [1] | CABLE AS (SENSOR) | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 273-6803 | [1] | PLATE | ||
| 312-0756 | [1] | RECEIVER AS-LASER (WITH ANGLE SENSOR) | ||
| 091-9035 | [4] | SPACER (11X25X20-MM THK) | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-7934 | [4] | WASHER-HARD (11X21X5-MM THK) | ||
| M | METRIC PART | |||
#SEBP41390262
275-6841: HARNESS AS-CONTROL
275-6841 HARNESS AS-CONTROL
S/N NBD1-UP; MEY1-UP
PART OF 275-7194 WIRING GP-CHASSIS
AN ATTACHMENT
S/N NBD1-UP; MEY1-UP
PART OF 275-7194 WIRING GP-CHASSIS
AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP41390263
275-6842: HARNESS AS-CONTROL
275-6842 HARNESS AS-CONTROL
S/N NBD1-UP; MEY1-UP
PART OF 275-7194 WIRING GP-CHASSIS
AN ATTACHMENT
S/N NBD1-UP; MEY1-UP
PART OF 275-7194 WIRING GP-CHASSIS
AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS#SEBP41390264
528-6670: HARNESS AS-CONTROL
528-6670 HARNESS AS-CONTROL
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 172-6062 | [1] | PLUG AS-CONNECTOR (18-PIN) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [93] | PLUG-SEAL | ||
| 9X-3402 | [75] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [75] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1S-9593 | [4] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 172-6065 | [1] | WEDGE-PLUG LOCK | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP41390265
546-2154: HARNESS AS-CONTROL
546-2154 HARNESS AS-CONTROL
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS#SEBP41390266
215-3249: HARNESS AS-ENGINE
215-3249 HARNESS AS-ENGINE
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N THX43014-UP
PART OF 397-9363 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
#SEBP41390267
323-9140: HARNESS AS-ENGINE
323-9140 HARNESS AS-ENGINE
S/N THX22180-UP
PART OF 330-6018, 397-9363 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
S/N THX22180-UP
PART OF 330-6018, 397-9363 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH PLUG AS-CONNECTOR INCLUDES) | ||||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 172-6062 | [1] | PLUG AS-CONNECTOR (18-PIN) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 8T-8737 | [93] | PLUG-SEAL | ||
| 317-1204 E | SLEEVE (8-CM) | |||
| 289-5150 E | SLEEVE (112-CM) | |||
| 289-5151 E | SLEEVE (12-CM) | |||
| 9X-3402 | [75] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [75] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP41390268
419-0841: HARNESS AS-ENGINE
419-0841 HARNESS AS-ENGINE
S/N THX22180-UP
PART OF 330-6018, 397-9363 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
S/N THX22180-UP
PART OF 330-6018, 397-9363 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
For full view, you need register
#SEBP41390269
495-9718: HARNESS AS-PANEL
495-9718 HARNESS AS-PANEL
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3S-2093 | [4] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
Information:
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE
Operation and Maintenance Manual
Special Instruction
Installation Of The AccuGrade<SUP>®</SUP> GPS Components{7220}
Installation Of The AccuGrade® GPS Components{7220}
Installation Of The AccuGrade® GPS Components{7220}
Installation of the AccuGrade<SUP>®</SUP> Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Installation of the AccuGrade® Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Installation of the AccuGrade® Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Technical Information Bulletin
AccuGrade<SUP>®</SUP> CD700 Devices not Responding{7220, 7490}
AccuGrade® CD700 Devices not Responding{7220, 7490}
AccuGrade® CD700 Devices not Responding{7220, 7490}
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Systems Operation
Brightness (Display and Light Bar)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Display Registration and Activation
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Testing and Adjusting
Angle Sensor - Calibrate - AS300/AS450 System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Machine Dimensions - Configure
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Troubleshooting
Electrical Power Supply (Display)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Light Bar)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (GPS Receiver)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Data Radio)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Angle Sensor)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Universal Total Station - MT900
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Service Magazine
