AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

251-0430 WIRING GP-PLATFORM S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP PART OF 229-9072 OPERATOR AR 330D L


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 330D L EXCAVATOR EDX
 330D & 330D L Excavators EDX00001-UP (MACHINE) POWERED BY C9 Engine SEBP4139 330D L EDX   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-HEATER
269-3410 WIRING GP-HEATER
WIRING GP-MEDIUM PRESSURE
259-4964 WIRING GP-MEDIUM PRESSURE
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
238-1565 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
342-3026 WIRING GP-QUICK COUPLER
WIRING GP-RADIO
283-2913 WIRING GP-RADIO
 

#SEBP41390420
 

251-0430: WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 229-9072 OPERATOR AR
i02348255 SEBP4139
2510430 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [18] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 267-7592 [1] HARNESS AS-PLATFORM  
  197-4385 [3] DIODE  
  3S-2093 [23] STRAP-CABLE  
  239-7352 [2] PLUG AS-CONNECTOR (6-PIN)  
  243-4505 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP41390421
 

238-1565: WIRING GP-QUICK COUPLER

238-1565 WIRING GP-QUICK COUPLER
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 237-3307, 460-5488 CONTROL AR-COUPLER, 279-5323 LINES GP-COUPLER
AN ATTACHMENT
i02412954 SEBP4139
2381565 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 7K-1181 [16] STRAP-CABLE  
3. 238-1588 [1] HARNESS AS-SOLENOID (QUICK COUPLER DISENGAGE)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
 

#SEBP41390422
 

342-3026: WIRING GP-QUICK COUPLER

342-3026 WIRING GP-QUICK COUPLER
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 344-4212 CONTROL AR-COUPLER
AN ATTACHMENT
i03898789 SEBP4139
3423026 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 7K-1181 [16] STRAP-CABLE  
3. 342-3027 [1] HARNESS AS-SOLENOID (QUICK COUPLER DISENGAGE)  
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
4. 450-6306 [1] HARNESS AS-PUMP (QUICK COUPLER SOLENOID)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
5. 347-4734 [2] CLIP  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP41390423
 

283-2913: WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N NBD1-UP; EDX1-UP; MEY1-UP
CANNOT BE USED WITH @@@@@268-6821@@@@@, @@@@@231-1768@@@@@
AN ATTACHMENT
i02558511 SEBP4139
2832913 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [11] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [10] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 149-5050 [4] RELAY (24-VOLT)(SPEAKERS)  
6. 170-2512 Y [1] SWITCH GP-TOGGLE (SPEAKER)  
7. 267-7676 [1] BRACKET AS  
8. 267-7695 [1] BRACKET AS  
9. 283-2914 [1] HARNESS AS-RADIO  
  8T-8737 [9] PLUG-SEAL  
  8T-8730 [21] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [6] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  149-5069 [8] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [12] TERMINAL-BLADE (16-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [25] STRAP-CABLE  
  149-5051 [4] CONNECTOR-RECEPTACLE  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  243-4509 [2] RECEPTACLE AS-CONNECTOR (8-PIN)  
10. 283-2984 [1] COVER  
11. 324-5770 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
12. 8T-4171 M [4] BOLT (M6X1X12-MM)  
13. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
14. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
15. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41390424
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02213964 SEBP4139
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41390425
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03087780 SEBP4139
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41390426
 

227-6188: DRIVE GP-FINAL

227-6188 DRIVE GP-FINAL -WITH MOTOR
S/N NBD169-929; EDX1-UP; MEY178-331
PART OF 267-6861 DRIVE GP-FINAL, 191-2576 POWER TRAIN AR
i02613101 SEBP4139
2276188 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6189 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41390427
 

227-6189: DRIVE GP-FINAL

227-6189 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NBD169-929; EDX1-UP; MEY178-331
PART OF 227-6188 DRIVE GP-FINAL
i02613110 SEBP4139
2276189 DRIVE GP-FINAL Parts scheme 2276189 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0643 [1] CARRIER  
5. 7Y-0645 [1] CARRIER  
6. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
7. 7Y-0661 [3] SHAFT-PLANETARY  
8. 7Y-0662 [4] SHAFT-PLANETARY  
9. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
10. 7Y-0667 [1] RING-RETAINING  
11. 7Y-0673 [1] GEAR-RING (73-TEETH)  
12. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
13. 7Y-0731 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
14. 7Y-1056 B [1] SHIM (0.8-MM THK)  
15. 7Y-1057 B [1] SHIM (1-MM THK)  
16. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
17. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
18. 094-0577 B [1] PLATE (7-MM THK)  
19. 094-0578 B [1] PLATE (8-MM THK)  
20. 094-0579 B [1] PLATE (9-MM THK)  
21. 094-0580 B [1] PLATE (10-MM THK)  
22. 110-7231 [1] GEAR-SUN (18-TEETH)  
23. 114-1541 [6] PIN-DOWEL  
24. 191-2521 [1] GEAR-SUN (23-TEETH)  
25. 199-4582 [3] BEARING AS  
26. 199-4583 [11] BEARING AS  
27. 213-4737 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
28. 227-6190 [1] HOUSING-MOTOR  
29. 227-6191 [1] HOUSING (SPROCKET)  
30. 227-6192 [1] GEAR-COUPLING  
31. 267-6809 B [1] SHIM (0.75-MM THK)(0.75-MM THK)  
32. 267-6810 B [1] SHIM (0.85-MM THK)(0.85-MM THK)  
33. 267-6811 B [1] SHIM (0.9-MM THK)(0.9-MM THK)  
34. 267-6812 B [1] SHIM (0.95-MM THK)(0.95-MM THK)  
35. 267-6813 B [1] SHIM (1.2-MM THK)(1.2-MM THK)  
36. 267-6814 B [1] SHIM (1.4-MM THK)(1.4-MM THK)  
37. 267-6815 B [1] SHIM (1.8-MM THK)(1.8-MM THK)  
38. 267-6816 B [1] SHIM (2-MM THK)(2-MM THK)  
39. 267-6817 B [1] SHIM (2.3-MM THK)(2.3-MM THK)  
40. 279-0344 [2] BEARING AS-TAPERED ROLLER  
41. 093-1731 [1] RING-RETAINING  
42. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
43. 095-0891 [7] PIN-SPRING  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 191-2526 [1] COVER  
46. 191-2645 [1] COUPLING  
47. 2P-3628 [1] SEAL-O-RING  
48. 6V-8133 M [10] BOLT (M24X3X80-MM)  
49. 6V-8237 [10] WASHER (26X44X4-MM THK)  
50. 7M-8485 [2] SEAL-O-RING  
51. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
52. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
53. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
54. 8T-4240 [3] RING-RETAINING  
55. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41390428
 

227-6195: DRIVE GP-FINAL

227-6195 DRIVE GP-FINAL -WITH MOTOR
S/N GBC1-UP; NBD1-623; EDX1-UP; MEY1-261
PART OF 267-6861 DRIVE GP-FINAL, 191-2576 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@267-6861@@@@@
i02289161 SEBP4139
2276195 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6196 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41390429
 

227-6196: DRIVE GP-FINAL

227-6196 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GBC1-UP; NBD1-623; EDX1-UP; MEY1-261
PART OF 227-6195 DRIVE GP-FINAL
i02289174 SEBP4139
2276196 DRIVE GP-FINAL Parts scheme 2276196 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0645 [1] CARRIER  
5. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
6. 7Y-0661 [3] SHAFT-PLANETARY  
7. 7Y-0662 [4] SHAFT-PLANETARY  
8. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
9. 7Y-0667 [1] RING-RETAINING  
10. 7Y-0673 [1] GEAR-RING (73-TEETH)  
11. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
12. 7Y-0731 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
13. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
14. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
15. 094-0577 [1] PLATE (7-MM THK)  
16. 094-0578 [1] PLATE (8-MM THK)  
17. 094-0579 [1] PLATE (9-MM THK)  
18. 094-0580 [1] PLATE (10-MM THK)  
19. 110-7231 [1] GEAR-SUN (18-TEETH)  
20. 191-2521 [1] GEAR-SUN (23-TEETH)  
21. 191-2526 [1] COVER  
22. 227-6198 Y [1] HOUSING GP-FINAL DRIVE  
23. 199-4582 [3] BEARING AS  
24. 199-4583 [11] BEARING AS  
25. 199-4750 [1] CARRIER-PLANETARY  
31. 093-1731 [1] RING-RETAINING  
32. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
33. 095-0891 [7] PIN-SPRING  
34. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
35. 191-2645 [1] COUPLING  
37. 2P-3628 [1] SEAL-O-RING  
38. 7M-8485 [2] SEAL-O-RING  
39. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
40. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
42. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
43. 8T-4240 [3] RING-RETAINING  
44. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery Disconnect Switch
330D and 336D Excavators
Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators
Battery - Recycle
330D and 336D Excavators
Power Receptacle - If Equipped
330D and 336D Excavators
Fuses - Replace
330D and 336D Excavators
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Installation Procedure for the 259-4962 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for the 259-4962 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}
Installation of the 452-2030 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5057, 7405}
Installation of the 452-2030 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5057, 7405}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Installation Procedure for 342-3026 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408, 6129}
Installation Procedure for 342-3026 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408, 6129}
Installation Procedure for the 460-5488 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}
Installation Procedure for the 460-5488 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Specifications
Radio (AM/FM)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Connector - Inspect
AccuGrade® GPS (CD700)
Wiring Harness (Open Circuit) - Test
AccuGrade® GPS (CD700)
Wiring Harness (Short Circuit) - Test
AccuGrade® GPS (CD700)
Overload Warning - Set - If Equipped
330D, 336D and 340D Excavators Hydraulic System
Connector Contact Description
AccuGrade® GPS (CD700)
Electrical Connector - Inspect
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Open Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Short Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Connector Contact Description
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
Machine Security System (MSS3i) Integrated
Troubleshooting
Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines
Electrical Power Supply
AccuGrade® GPS (CD700)
CAN Data Link - Test
AccuGrade® GPS (CD700)
CAN Data Link - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22
A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/08/23
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 330D L :

WIRING GP-MEDIUM PRESSURE
259-4964 WIRING GP-MEDIUM PRESSURE
WIRING GP-HEATER
269-3410 WIRING GP-HEATER
WIRING GP-HAMMER
251-0622 WIRING GP-HAMMER
WIRING GP-HAMMER
251-0622 WIRING GP-HAMMER
339-2041 WIRING GP-GRADE CONTROL
339-2036 WIRING GP-GRADE CONTROL
339-2034 WIRING GP-GRADE CONTROL
204-3461 WIRING GP-GRADE CONTROL
WIRING GP-QUICK COUPLER
238-1565 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
342-3026 WIRING GP-QUICK COUPLER
WIRING GP-RADIO
283-2913 WIRING GP-RADIO
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
227-6188 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6189 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6195 DRIVE GP-FINAL

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.