AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

235-8970 CONTROL GP-HANDLE -JOYSTICK, RH S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP PART OF 232-4158, 270-5952, 297-0532 CONTROL GP-JOYSTICK AN ATTACHMENT 330D L


OPERATOR STATION
CONTROL GP-HANDLE
AIR CONDITIONER GP
CONTROL GP-HYDRAULIC

EXCAVATOR 330D L EXCAVATOR EDX
 330D & 330D L Excavators EDX00001-UP (MACHINE) POWERED BY C9 Engine SEBP4139 330D L EDX   (2005)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
235-8969 CONTROL GP-HANDLE
CONTROL GP-HANDLE
235-8970 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2109 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2127 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2128 CONTROL GP-HANDLE
 

#SEBP41391540
 

235-8970: CONTROL GP-HANDLE

235-8970 CONTROL GP-HANDLE -JOYSTICK, RH
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 232-4158, 270-5952, 297-0532 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02222110 SEBP4139
2358970 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4010 [1] LEVER  
2. 353-2150 [1] BOOT  
3. 245-7844 [1] KNOB AS  
  6I-5298 M [1] SCREW-TAPPING  
  124-4009 [1] SHAFT  
  222-0225 [1] SWITCH AS-PUSH BUTTON (MANUAL LOW IDLE)  
4. 095-0735 M [2] SCREW-MACHINE (M5X0.8X8-MM)  
  M   METRIC PART
 

#SEBP41391541
 

260-2109: CONTROL GP-HANDLE

260-2109 CONTROL GP-HANDLE -JOYSTICK, RH
S/N GBC1-UP; EDX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7705, 259-7762, 297-0534, 297-0538 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02427052 SEBP4139
2602109 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4589 [1] CONTROL GP-HANDLE (RH)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
5. 305-0332 [1] BOOT  
  M   METRIC PART
 

#SEBP41391542
 

260-2110: CONTROL GP-HANDLE

260-2110 CONTROL GP-HANDLE -JOYSTICK, LH
S/N GBC1-UP; EDX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7706, 259-7763 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02427095 SEBP4139
2602110 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8463 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 227-7617 [1] CONTROL GP-HANDLE (LH)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 240-5067 [1] BOOT  
  M   METRIC PART
 

#SEBP41391543
 

260-2110: CONTROL GP-HANDLE

260-2110 CONTROL GP-HANDLE -JOYSTICK, LH
S/N GBC1-UP; EDX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7706, 259-7763, 297-0535, 297-0539 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02865875 SEBP4139
2602110 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4590 C [1] CONTROL GP-HANDLE (LH)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 305-0331 [1] BOOT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP41391544
 

260-2127: CONTROL GP-HANDLE

260-2127 CONTROL GP-HANDLE -JOYSTICK, RH
S/N GBC1-UP; EDX1-UP
3-BUTTON, TRIGGER SWITCH
PART OF 259-7764, 270-5666, 297-0536, 297-0540 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02425908 SEBP4139
2602127 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4595 [1] CONTROL GP-HANDLE (RH)  
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 305-0332 [1] BOOT  
  M   METRIC PART
 

#SEBP41391545
 

260-2128: CONTROL GP-HANDLE

260-2128 CONTROL GP-HANDLE -JOYSTICK, LH
S/N GBC1-UP; EDX1-UP
3-BUTTON, TRIGGER SWITCH
PART OF 259-7765, 270-5667, 297-0537, 297-0541 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02426014 SEBP4139
2602128 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 305-0331 [1] BOOT  
4. 297-4595 [1] CONTROL GP-HANDLE (LH)  
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 260-2111 [1] LEVER  
  M   METRIC PART
 

#SEBP41391546
 

245-7846: CONTROL GP-HEAT & AIR COND

245-7846 CONTROL GP-HEAT & AIR COND -AIR INLET
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 240-5036, 316-8811, 316-8916 AIR CONDITIONER GP
AN ATTACHMENT
i02400858 SEBP4139
2457846 CONTROL GP-HEAT & AIR COND Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-8300 [4] SCREW-TAPPING  
2. 196-1666 [1] RELAY (COMPRESSOR CLUTCH)  
2A. 196-1666 [1] RELAY (BLOWER)  
3. 245-7813 [1] MOTOR AS  
4. 245-7814 [1] BRACKET  
5. 245-7815 [1] SENSOR AS-TEMPERATURE (AIR)  
6. 245-7816 [1] DAMPER AS  
 

#SEBP41391547
 

239-8693: CONTROL GP-HYDRAULIC PEDAL

239-8693 CONTROL GP-HYDRAULIC PEDAL -RH
S/N NBD1-UP; EDX1-UP; MEY1-UP
PART OF 255-5767, 255-5769 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02408783 SEBP4139
2398693 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-5260 [1] LANYARD  
2. 122-9611 [1] PEDAL-RUBBER (RH)  
3. 357-3877 [1] PIN  
4. 153-8762 [1] PEDAL AS  
5. 153-8763 [1] SUPPORT AS  
6. 206-3336 Y [1] VALVE GP-PILOT (WORK TOOL)  
7. 095-0735 M [2] SCREW-MACHINE (M5X0.8X8-MM)  
8. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
9. 8T-0114 [1] PIN-SPRING  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41391548
 

239-8695: CONTROL GP-HYDRAULIC PEDAL

239-8695 CONTROL GP-HYDRAULIC PEDAL
S/N NBD1-UP; EDX1-UP; MEY1-UP
PART OF 255-5768, 255-5770 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02412874 SEBP4139
2398695 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-5260 [2] LANYARD  
2. 121-1865 [1] PEDAL-RUBBER (LH)  
3. 122-9611 [1] PEDAL-RUBBER (RH)  
4. 357-3877 [2] PIN  
5. 153-8753 [1] PEDAL AS  
6. 153-8762 [1] PEDAL AS  
7. 153-8763 [1] SUPPORT AS  
8. 206-3336 Y [2] VALVE GP-PILOT  
9. 259-7877 [1] SUPPORT AS  
10. 095-0735 M [4] SCREW-MACHINE (M5X0.8X8-MM)  
11. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
12. 8T-0114 [2] PIN-SPRING  
13. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41391549
 

259-7179: CONTROL GP-HYDRAULIC PEDAL

259-7179 CONTROL GP-HYDRAULIC PEDAL
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 259-7176 PEDAL AR-AUXILIARY
AN ATTACHMENT
i02344778 SEBP4139
2597179 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-5260 [1] LANYARD  
2. 357-3877 [1] PIN  
3. 135-2274 [1] PEDAL-RUBBER  
4. 164-0614 [1] PEDAL AS  
5. 164-0617 [1] SUPPORT AS  
6. 206-3336 Y [1] VALVE GP-PILOT (THIRD PEDAL, STRAIGHT TRAVEL)  
7. 095-0735 M [2] SCREW-MACHINE (M5X0.8X8-MM)  
8. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
9. 8T-0114 [1] PIN-SPRING  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
12. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
13. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Procedure for the 279-5324 Joystick Control Gp {7405, 7557}
Installation Procedure for the 279-5324 Joystick Control Gp {7405, 7557}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 385C MH, 323D OEM, 325D OEM, 330D OEM, 345C OEM, 365C OEM AND 385C OEM HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 385C MH, 323D OEM, 325D OEM, 330D OEM, 345C OEM, 365C OEM AND 385C OEM HYDRAULIC EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Hydraulic Hand Control
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 385C MH, 323D OEM, 325D OEM, 330D OEM, 345C OEM, 365C OEM AND 385C OEM HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 385C MH, 323D OEM, 325D OEM, 330D OEM, 345C OEM, 365C OEM AND 385C OEM HYDRAULIC EXCAVATORS
Service Letter-Asia
Service Letter-APD
Service Magazine
New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
2012/03/09

Caterpillar Parts SIS Catalog 330D L :

CONTROL GP-HANDLE
235-8969 CONTROL GP-HANDLE
CONTROL GP-FOOT
239-8696 CONTROL GP-FOOT
CONTROL & MTG GP-PEDAL
221-8884 CONTROL & MTG GP-PEDAL
CONTROL & MTG GP-PEDAL
221-8884 CONTROL & MTG GP-PEDAL
CONTROL & MTG GP-JOYSTICK
310-0078 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
270-5690 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
270-5690 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
270-5689 CONTROL & MTG GP-JOYSTICK
CONTROL GP-HANDLE
260-2109 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2127 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2128 CONTROL GP-HANDLE
CONTROL GP-HEAT & AIR COND
245-7846 CONTROL GP-HEAT & AIR COND
CONTROL GP-HYDRAULIC PEDAL
239-8693 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
239-8695 CONTROL GP-HYDRAULIC PEDAL

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.