AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

992K Wheel Loader H4C00001-UP (MACHINE) POWERED BY C32 Engine BASIC ENGINE Caterpillar SIS



WHEEL LOADER 992K WHEEL LOADER H4C
 992K Wheel Loader H4C00001-UP (MACHINE) POWERED BY C32 Engine SEBP4140 992K H4C   (2008)

Parts group 992K:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE -ALTERNATOR, AIR CONDITIONER COMPRESSOR
S/N H4C1-UP; LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE, 246-4284 INSTALLATION AR-ENGINE
ENGINE BRAKE GP
ACTUATOR AS-VALVE
313-4622 ACTUATOR AS-VALVE
313-4622 ACTUATOR AS-VALVE
S/N LJW2195-UP
PART OF 255-7955 ACTUATOR GP-VALVE
ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
S/N LJW5675-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
ACTUATOR GP-VALVE
255-7955 ACTUATOR GP-VALVE
255-7955 ACTUATOR GP-VALVE
S/N LJW2195-UP
PART OF 261-2304, 350-5529 ENGINE AR-CORE
ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
S/N LJW5675-UP
PART OF 350-5529 ENGINE AR-CORE
SWITCH GP-ENGINE BRAKE
282-4332 SWITCH GP-ENGINE BRAKE
282-4332 SWITCH GP-ENGINE BRAKE
S/N H4C1-UP
PART OF 279-9490, 279-9491 ENGINE AR
CAMSHAFT GP
CAMSHAFT GP
260-9307 CAMSHAFT GP
260-9307 CAMSHAFT GP
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
Type 1
CAMSHAFT GP
260-9307 CAMSHAFT GP
260-9307 CAMSHAFT GP
S/N LJW2195-UP
PART OF 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
Type 2
COMPRESSOR GP-REFRIGERANT
ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE -ALTERNATOR, AIR CONDITIONER COMPRESSOR
S/N H4C1-UP; LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE, 246-4284 INSTALLATION AR-ENGINE
CRANKSHAFT GP
CRANKSHAFT GP
224-3250 CRANKSHAFT GP
224-3250 CRANKSHAFT GP
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N LJW2195-UP
PART OF 245-9775 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N LJW295-UP
PART OF 224-3250 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
224-3170 COVER GP-CYLINDER BLOCK
224-3170 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
S/N LJW2195-UP
PART OF 259-3142, 259-3143 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
245-9778 COVER GP-CYLINDER BLOCK
245-9778 COVER GP-CYLINDER BLOCK -REAR STRUCTURE
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
254-1776 COVER GP-CYLINDER BLOCK
254-1776 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
S/N LJW2195-UP
PART OF 246-4283, 246-8228 ENGINE AR-COMPLETE
CYLINDER BLOCK AS
230-7181 CYLINDER BLOCK AS
230-7181 CYLINDER BLOCK AS
S/N LJW2195-UP
PART OF 253-9883, 324-6139 CYLINDER BLOCK AS
CYLINDER BLOCK AS
253-9883 CYLINDER BLOCK AS
253-9883 CYLINDER BLOCK AS
S/N LJW2195-3865
PART OF 253-9882 CYLINDER BLOCK GP
CYLINDER BLOCK AS
324-6139 CYLINDER BLOCK AS
324-6139 CYLINDER BLOCK AS
S/N LJW3865-UP
PART OF 253-9882 CYLINDER BLOCK GP
CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
S/N LJW5152-UP
PART OF 348-9906 CYLINDER BLOCK AS
CYLINDER BLOCK AS
348-9906 CYLINDER BLOCK AS
348-9906 CYLINDER BLOCK AS
S/N LJW5152-UP
PART OF 349-2859 CYLINDER BLOCK GP
CYLINDER BLOCK GP
253-9882 CYLINDER BLOCK GP
253-9882 CYLINDER BLOCK GP
S/N LJW2195-3865
PART OF 261-2303, 261-2304 ENGINE AR-CORE
CYLINDER BLOCK GP
253-9882 CYLINDER BLOCK GP
253-9882 CYLINDER BLOCK GP
S/N LJW3866-UP
PART OF 261-2303, 261-2304 ENGINE AR-CORE
CYLINDER BLOCK GP
349-2859 CYLINDER BLOCK GP
349-2859 CYLINDER BLOCK GP
S/N LJW5152-UP
PART OF 350-5529, 350-5535 ENGINE AR-CORE
PLUG GP-CYLINDER BLOCK
277-6297 PLUG GP-CYLINDER BLOCK
277-6297 PLUG GP-CYLINDER BLOCK
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
349-8623 PLUG GP-CYLINDER BLOCK
349-8623 PLUG GP-CYLINDER BLOCK
S/N LJW5152-UP
PROVIDES PLUGS FOR THE UNUSED PORTS ON THE BLOCK
PART OF 246-4283, 259-3142, 259-3143 ENGINE AR-COMPLETE
CYLINDER HEAD GP
CYLINDER HEAD AS
284-2787 CYLINDER HEAD AS
284-2787 CYLINDER HEAD AS
S/N LJW3081-UP
PART OF 284-8892 CYLINDER HEAD GP
CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
S/N LJW2195-UP
PART OF 359-0936 CYLINDER HEAD GP
CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
S/N LJW6300-UP
PART OF 396-8375 CYLINDER HEAD GP
CYLINDER HEAD GP
284-8892 CYLINDER HEAD GP
284-8892 CYLINDER HEAD GP
S/N LJW4913-6299
PART OF 339-3585 CYLINDER HEAD GP
CYLINDER HEAD GP
284-8895 CYLINDER HEAD GP
284-8895 CYLINDER HEAD GP
S/N LJW2195-4912
PART OF 261-2303, 261-2304 ENGINE AR-CORE
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N LJW4902-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N LJW5577-UP
PART OF 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
Type 1
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N LJW5577-UP
PART OF 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
Type 2
CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
S/N LJW2195-UP
PART OF 284-8895, 339-3585 CYLINDER HEAD GP
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N LJW6300-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N LJW6300-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 2
442-0770 KIT-CYLINDER HEAD GASKET
442-0770 KIT-CYLINDER HEAD GASKET -SINGLE CYLINDER HEAD
S/N H4C1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@246-4283@@@@@, @@@@@246-8228@@@@@, @@@@@259-3142@@@@@, @@@@@259-3143@@@@@
PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
DAMPER GP
DAMPER GP
234-1579 DAMPER GP
234-1579 DAMPER GP
S/N LJW2195-UP
PART OF 235-0993 GEAR GP-FRONT
DAMPER GP
257-8730 DAMPER GP
257-8730 DAMPER GP
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
DAMPER GP
352-7936 DAMPER GP
352-7936 DAMPER GP
S/N LJW7335-UP
PART OF 355-2286 GEAR GP-FRONT
DRIVE GP-ACCESSORY
ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE -ALTERNATOR, AIR CONDITIONER COMPRESSOR
S/N H4C1-UP; LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE, 246-4284 INSTALLATION AR-ENGINE
FLYWHEEL GP
FLYWHEEL GP
245-9777 FLYWHEEL GP
245-9777 FLYWHEEL GP
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
Type 1
FLYWHEEL GP
245-9777 FLYWHEEL GP
245-9777 FLYWHEEL GP
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
Type 2
GEAR GP
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N LJW5577-UP
PART OF 350-5529, 350-5535 ENGINE AR-CORE
GEAR GP-REAR
245-9776 GEAR GP-REAR
245-9776 GEAR GP-REAR
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
245-9775 HOUSING GP-FLYWHEEL
245-9775 HOUSING GP-FLYWHEEL
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
HOUSING GP-FRONT
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N LJW5577-UP
PART OF 350-5529, 350-5535 ENGINE AR-CORE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N LJW2195-UP
PART OF 261-2303, 261-2304, 350-5529, 350-5535 ENGINE AR-CORE
451-8600 KIT-FRONT COVER GASKET
451-8600 KIT-FRONT COVER GASKET
S/N H4C1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@246-4283@@@@@, @@@@@246-8228@@@@@, @@@@@259-3142@@@@@, @@@@@259-3143@@@@@
LIFTING GP-ENGINE
LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
261-8342 MOUNTING GP-ALTERNATOR
261-8342 MOUNTING GP-ALTERNATOR
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
221-1460 SUPPORT GP-ENGINE
221-1460 SUPPORT GP-ENGINE
S/N H4C1-UP
PART OF 246-4284 INSTALLATION AR-ENGINE
PAN GP-OIL
EXTENSION GP-DRAIN
273-3191 EXTENSION GP-DRAIN
273-3191 EXTENSION GP-DRAIN -ENGINE OIL
S/N H4C1-UP
PART OF 246-4284 INSTALLATION AR-ENGINE
PAN GP-OIL
291-1432 PAN GP-OIL
291-1432 PAN GP-OIL
S/N LJW2195-UP
PART OF 246-4283, 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
PISTON & ROD GP
PISTON & ROD GP
239-6144 PISTON & ROD GP
239-6144 PISTON & ROD GP
S/N LJW2195-UP
16.5:1 COMPRESSION RATIO
PART OF 261-2303, 350-5535 ENGINE AR-CORE
PISTON & ROD GP
319-6714 PISTON & ROD GP
319-6714 PISTON & ROD GP
S/N LJW2195-UP
16.5:1 COMPRESSION RATIO
PART OF 261-2304 ENGINE AR-CORE
PISTON & ROD GP
352-4215 PISTON & ROD GP
352-4215 PISTON & ROD GP
S/N LJW5460-UP
16:5:1 COMPRESSION RATIO
PART OF 350-5529, 350-5535 ENGINE AR-CORE
VALVE MECHANISM GP
ACTUATOR AS-VALVE
313-4622 ACTUATOR AS-VALVE
313-4622 ACTUATOR AS-VALVE
S/N LJW2195-UP
PART OF 255-7955 ACTUATOR GP-VALVE
ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
S/N LJW5675-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
ACTUATOR GP-VALVE
255-7955 ACTUATOR GP-VALVE
255-7955 ACTUATOR GP-VALVE
S/N LJW2195-UP
PART OF 261-2304, 350-5529 ENGINE AR-CORE
ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
S/N LJW5675-UP
PART OF 350-5529 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
223-6408 BASE GP-VALVE COVER & INJ HARN
223-6408 BASE GP-VALVE COVER & INJ HARN
S/N LJW2195-UP
PART OF 261-2303, 350-5535 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJW2195-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 1
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJW2195-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 2
BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJW1-UP
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
249-8717 BASE GP-VALVE COVER & INJ HARN
249-8717 BASE GP-VALVE COVER & INJ HARN
S/N LJW2195-UP
PART OF 261-2304, 350-5529 ENGINE AR-CORE
COVER GP-SOUND SUPPRESSION
289-2229 COVER GP-SOUND SUPPRESSION
289-2229 COVER GP-SOUND SUPPRESSION
S/N LJW2195-UP
PART OF 246-4283, 246-8228 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
266-9850 COVER GP-VALVE MECHANISM
266-9850 COVER GP-VALVE MECHANISM
S/N LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
304-4238 COVER GP-VALVE MECHANISM
304-4238 COVER GP-VALVE MECHANISM
S/N LJW2195-UP
PART OF 246-8228, 259-3142, 259-3143 ENGINE AR-COMPLETE
MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW2195-2513
PART OF 261-2304 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW2514-3945
PART OF 261-2304 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW3946-5067
PART OF 261-2304 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW5068-UP
PART OF 261-2304, 350-5529 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW2195-UP
PART OF 261-2303 ENGINE AR-CORE
Type 1
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW2195-UP
PART OF 261-2303, 350-5535 ENGINE AR-CORE
Type 2
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW2195-8636
PART OF 261-2303, 350-5535 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJW8637-UP
PART OF 350-5535 ENGINE AR-CORE
ROCKER ARM GP
280-8043 ROCKER ARM GP
280-8043 ROCKER ARM GP
S/N LJW2195-2513
PART OF 255-8001 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
301-5349 ROCKER ARM GP
301-5349 ROCKER ARM GP
S/N LJW2195-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
301-5350 ROCKER ARM GP
301-5350 ROCKER ARM GP
S/N LJW2195-UP
PART OF 301-5349 ROCKER ARM GP
ROCKER ARM GP
301-5352 ROCKER ARM GP
301-5352 ROCKER ARM GP -UNIT INJECTOR
S/N LJW2195-UP
PART OF 301-5349, 320-2793, 342-6643, 392-0066 ROCKER ARM GP
ROCKER ARM GP
301-5354 ROCKER ARM GP
301-5354 ROCKER ARM GP -VALVE
S/N LJW2195-UP
PART OF 301-5349 ROCKER ARM GP
ROCKER ARM GP
320-2793 ROCKER ARM GP
320-2793 ROCKER ARM GP -VALVE
S/N LJW3946-5067
PART OF 255-8001 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2794 ROCKER ARM GP
320-2794 ROCKER ARM GP
S/N LJW2195-UP
PART OF 320-2793, 342-6643 ROCKER ARM GP
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N LJW3946-UP
PART OF 320-2793 ROCKER ARM GP
ROCKER ARM GP
342-6643 ROCKER ARM GP
342-6643 ROCKER ARM GP -VALVE
S/N LJW2195-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
384-1365 ROCKER ARM GP
384-1365 ROCKER ARM GP
S/N LJW2195-UP
PART OF 392-0066 ROCKER ARM GP
ROCKER ARM GP
392-0066 ROCKER ARM GP
392-0066 ROCKER ARM GP
S/N LJW2195-8636
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N LJW5068-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N LJW5068-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N LJW5068-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 3
ROCKER ARM GP
437-3877 ROCKER ARM GP
437-3877 ROCKER ARM GP -EXHAUST
S/N LJW5068-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
437-3881 ROCKER ARM GP
437-3881 ROCKER ARM GP -UNIT INJECTOR
S/N LJW5068-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
489-8223 ROCKER ARM GP
489-8223 ROCKER ARM GP
S/N LJW5068-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
524-3708 ROCKER ARM GP
524-3708 ROCKER ARM GP
S/N LJW5068-UP
PART OF 437-3876 ROCKER ARM GP
PLATE GP-ENGINE IDENTIFICATION
266-9848 PLATE GP-ENGINE IDENTIFICATION
266-9848 PLATE GP-ENGINE IDENTIFICATION
S/N LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE
HOUSING GP-REAR
HOUSING GP-REAR
233-2462 HOUSING GP-REAR
233-2462 HOUSING GP-REAR
S/N LJW2195-UP
PART OF 261-2303, 261-2304 ENGINE AR-CORE
HOUSING GP-REAR
350-8861 HOUSING GP-REAR
350-8861 HOUSING GP-REAR
S/N LJW5152-UP
PART OF 350-5529, 350-5535 ENGINE AR-CORE
451-8604 KIT-REAR COVER GASKET
451-8604 KIT-REAR COVER GASKET
S/N H4C1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@246-4283@@@@@, @@@@@246-8228@@@@@, @@@@@259-3142@@@@@
ACCESSORY GP-ENGINE
ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE
291-2838 ACCESSORY GP-ENGINE -ALTERNATOR, AIR CONDITIONER COMPRESSOR
S/N H4C1-UP; LJW2195-UP
PART OF 246-4283 ENGINE AR-COMPLETE, 246-4284 INSTALLATION AR-ENGINE

Information:

(For parts list, see above)

Specifications
Compression Brake
C27 and C32 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
CID 2533 FMI 06 Compression Brake Low/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2533 FMI 05 Compression Brake Low/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2534 FMI 05 Compression Brake Low/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2535 FMI 05 Compression Brake Medium/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2536 FMI 05 Compression Brake Medium/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2534 FMI 06 Compression Brake Low/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2535 FMI 06 Compression Brake Medium/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2536 FMI 06 Compression Brake Medium/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines
Compression Brake Solenoid Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines
CID 2354 FMI 03 Engine Compression Brake Pedal Switch voltage above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2354 FMI 04 Engine Compression Brake Pedal Switch voltage below normal
C27 and C32 Engines for Caterpillar Built Machines
Engine News
New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20
Special Instruction
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Crankshaft Seal Installation {1160, 1161}
Crankshaft Seal Installation {1160, 1161}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Specifications
Camshaft
C27 and C32 Engines for Caterpillar Built Machines
Camshaft
C27 and C32 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER VALVE TRAIN MECHANISM IN C27 ENGINES INSTALLED IN CERTAIN D10T TRACK-TYPE TRACTORS, 775E OEM OFF-HIGHWAY TRUCKS, AND 992K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2013/02/21
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Engine News
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Tooling Is Available for Measuring the Deck Height on Certain Machines Equipped with C27 and C32 Engines {1201}
2010/08/26
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Technical Information Bulletin
Oil and Coolant Leaks of the Plate Gasket on the C27 and C32 Engines{1201, 1201}
Oil and Coolant Leaks of the Plate Gasket on the C27 and C32 Engines{1201, 1201}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Testing and Adjusting
Cylinder Block - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Installing the Cross Bolts for the Main Bearings in C27 and C32 Engines {1201, 1203}
2009/09/21
A New Gasket Is Available for the Rectangular Cover on the Engine Block on Certain C27 and C32 Machine Engines {1201, 1380, 7555}
2010/03/18
A New Cylinder Pack Gp and Oil Jet Tube Are Used on Certain C32 Machine Engines {1225, 1239}
2010/07/21
New Tooling Is Available for Measuring the Deck Height on Certain Machines Equipped with C27 and C32 Engines {1201}
2010/08/26
An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain Machines Equipped with C27 and C32 Engines {1201, 7555}
2012/04/12
Improved Cross-Tie Bolts Are Now Used on the C27 and C32 Engines of Certain Machines {1201, 7553}
2013/01/10
New Cat<SUP>&reg;</SUP> Reman Blocks Are Used on Certain 3500 Machine Engines {1201}
2015/06/26
A New Cylinder Liner is Now Available in All C32 Machine Engines {1201, 1216}
A New Cylinder Liner is Now Available in All C32 Machine Engines {1201, 1216}
Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat<SUP>&reg;</SUP> Machine Engines {1157, 1201}
Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat® Machine Engines {1157, 1201}
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Specifications
Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Cat Reman Announces Addition of Upgrade-To-New (UTN) and Reman Cylinder Heads for Cat&reg; Non-Captive Engines
Cat Reman Announces Addition of Upgrade-To-New (UTN) and Reman Cylinder Heads for Cat® Non-Captive Engines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Inspection Procedure for the Saddle of the Rocker Arm Shaft {1100, 1123}
2008/09/08
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/12/01
A New Panel Is Used on C27 and C32 Engines {1100}
2009/10/07
A New Intake Valve and Seat Combination Is Now Used with a New Cylinder Head on the Engines of Certain Machines {1100, 1101}
2012/09/17
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Cylinder Heads for Certain Machine Engines {1100}
2014/10/03
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
992K Wheel Loader
Specifications
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Rear Gear Group - Time
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
New O-Ring Seal is Now Used on Certain Cat<SUP>&reg;</SUP> Machine Engines {1204, 7555}
New O-Ring Seal is Now Used on Certain Cat® Machine Engines {1204, 7555}
Specifications
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat<SUP>&reg;</SUP> Machine Engines {1157, 1201}
Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat® Machine Engines {1157, 1201}
Specifications
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Improved Front Cylinder Block Gaskets are Now Used on Certain C27 and C32 Machine Engines {1151, 1162, 7555}
Improved Front Cylinder Block Gaskets are Now Used on Certain C27 and C32 Machine Engines {1151, 1162, 7555}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Operation and Maintenance Manual
Engine Mounts - Inspect
992K Wheel Loader
Disassembly and Assembly
Engine Trunnion - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Oil Level - Check
992K Wheel Loader
Engine Oil and Filter - Change
992K Wheel Loader
Engine Oil Sample - Obtain
992K Wheel Loader
Specifications
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
New Oil Pan Gasket Is Available on Certain C27 and C32 Machine Engines {1302, 7555}
2010/05/27
Engine News
A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Engines {1225}
2009/12/09
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings - C27 Engines
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings - C32 Engines
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C27 and C32 Engines for Caterpillar Built Machines
Compression - Test
C27 and C32 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
New Pistons Are Now Used {1214}
2008/09/08
A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Machine Engines {1225}
2009/12/04
A New Piston, Piston Ring, and Oil Jet Tube Are Used on Certain C32 Machine Engines {1225}
2010/07/19
A New Cylinder Pack Gp and Oil Jet Tube Are Used on Certain C32 Machine Engines {1225, 1239}
2010/07/21
A New Cylinder Pack Gp and Oil Jet Tube Are Used on Certain C32 Machine Engines {1225, 1239}
2012/12/19
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Specifications
Switches
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Disassembly and Assembly
Rear Power Take-Off (RPTO) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Engine News
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE PARTS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 773F, 773G, 775F, 775G, 777F, AND 777G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS, D10T, AND D11T TRACK-TYPE TRACTORS

Truck sale:

 
 
Caterpillar 992K
- Wheel Loaders
MADISA
Caterpillar 992K, Wheel Loaders, Construction
3,013,600 
Caterpillar 992K, Wheel Loaders, Construction
- Wheel Loaders
MADISA
Caterpillar 992K, Wheel Loaders, Construction
2,229,800 
Caterpillar 992K, Wheel Loaders, Construction
- Wheel Loaders
MADISA
Caterpillar 992K, Wheel Loaders, Construction
1,495,000 
Caterpillar 992K, Wheel Loaders, Construction

WYOMING MACHINERY
Caterpillar 992K, Wheel Loaders, Construction
1,850,000 
Caterpillar 992K, Wheel Loaders, Construction

WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.