ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPCOOLER GP
TRANSMISSION GP
GEAR GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP41400450
289-1393: WIRING GP-TILT REGEN CONTROL
289-1393 WIRING GP-TILT REGEN CONTROL
S/N H4C1-UP
PART OF 316-6992 ELECTRICAL AR
S/N H4C1-UP
PART OF 316-6992 ELECTRICAL AR
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4V-1939 | [4] | CLAMP | |
2. | 107-4749 | [2] | PLATE | |
3. | 198-7651 | [2] | BRACKET AS | |
4. | 284-0583 | [1] | HARNESS AS-SOLENOID (TILT REGENERATION) | |
9X-2383 G | HOSE (35.1-INCHES) | |||
6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
5. | 288-6204 | [1] | BRACKET AS | |
6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
6. | 288-6208 | [1] | PLATE AS | |
6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
7. | 5P-9085 | [4] | CLIP (LOOP) | |
8. | 7X-2534 M | [4] | BOLT (M6X1X50-MM) | |
9. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
11. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
12. | 4D-7735 | [1] | CLIP | |
13. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
G | ORDER BY THE INCH | |||
M | METRIC PART |
#SEBP41400451
280-3582: AXLE AR-FIXED
280-3582 AXLE AR-FIXED -FRONT
S/N H4C1-UP
PART OF 353-4144, 353-4164 OPTION AR-MACHINE, 262-2084 POWER TRAIN AR
S/N H4C1-UP
PART OF 353-4144, 353-4164 OPTION AR-MACHINE, 262-2084 POWER TRAIN AR
Parts for your 992K WHEEL LOADER:
CATERPILLAR SIS#SEBP41400452
280-3583: AXLE AR-OSCILLATING
280-3583 AXLE AR-OSCILLATING -REAR
S/N H4C1-UP
PART OF 353-4144 OPTION AR-MACHINE, 262-2084 POWER TRAIN AR
S/N H4C1-UP
PART OF 353-4144 OPTION AR-MACHINE, 262-2084 POWER TRAIN AR
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
316-9362 Y | [1] | AXLE GP-OSCILLATING (REAR) | ||
316-8323 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | ||
353-4226 Y | [1] | LINES GP-SERVICE BRAKE | ||
S/N H4C514-UP | ||||
280-3580 Y | [2] | WHEEL GP-FINAL DRIVE & BRAKE | ||
353-4216 Y | [1] | WIRING GP-AXLE TEMPERATURE | ||
S/N H4C514-UP | ||||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP41400453
366-4541: AXLE AR-OSCILLATING
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
316-9362 Y | [1] | AXLE GP-OSCILLATING (REAR) | ||
366-4572 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | ||
353-4226 Y | [1] | LINES GP-SERVICE BRAKE | ||
280-3580 Y | [2] | WHEEL GP-FINAL DRIVE & BRAKE | ||
353-4216 Y | [1] | WIRING GP-AXLE TEMPERATURE | ||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP41400454
107-0700: AXLE GP-FIXED
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 107-0696 | [2] | SHAFT-AXLE | |
2. | 113-1747 | [1] | HOUSING AS | |
3. | 104-7006 | [12] | DOWEL-HOLLOW | |
4. | 164-4180 | [1] | PLUG AS | |
7M-8485 | [1] | SEAL-O-RING | ||
9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
5. | 2J-3507 | [60] | NUT-FULL (1-8-THD) | |
6. | 165-4929 | [1] | PLUG AS-MAGNETIC | |
5P-4484 | [1] | PLUG-MAGNETIC (AXLE OIL DRAIN) | ||
7M-8485 | [1] | SEAL-O-RING | ||
7. | 2K-9062 | [1] | PIN-SPRING | |
8. | 9X-8896 | [8] | BOLT (1-8X4-IN) | |
9. | 9M-2828 | [68] | WASHER-HARD (28X44.5X6-MM THK) |
#SEBP41400455
316-9362: AXLE GP-OSCILLATING
316-9362 AXLE GP-OSCILLATING -REAR
S/N H4C1-UP
PART OF 280-3583, 366-4541 AXLE AR-OSCILLATING
S/N H4C1-UP
PART OF 280-3583, 366-4541 AXLE AR-OSCILLATING
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1D-4608 | [16] | BOLT (3/4-10X2.75-IN) | |
2. | 2V-2755 | [1] | PLATE-THRUST | |
3. | 2V-2757 | [1] | COVER | |
4. | 2V-2761 | [1] | RETAINER-BEARING | |
5. | 104-7006 | [8] | DOWEL-HOLLOW | |
6. | 107-0696 | [2] | SHAFT-AXLE | |
7. | 113-5122 | [2] | DOWEL | |
8. | 449-5363 | [1] | BUSHING | |
9. | 449-5364 | [1] | BUSHING | |
10. | 205-8347 | [1] | TRUNNION | |
11. | 235-8668 | [1] | SUPPORT-TRUNNION | |
12. | 273-5012 | [3] | SEAL-WIPER | |
13. | 316-9360 | [1] | SUPPORT | |
14. | 318-4637 | [1] | HOUSING AS | |
7X-0750 M | [2] | BOSS-WELD (M10X1.5X55-MM) | ||
9X-8487 M | [2] | BOSS-WELD (M10X1.5X35-MM) | ||
15. | 1A-1460 | [12] | BOLT (1/2-13X2-IN) | |
16. | 1D-4626 | [16] | BOLT (7/8-9X2.75-IN) | |
17. | 2J-3507 | [60] | NUT-FULL (1-8-THD) | |
18. | 2K-9062 | [1] | PIN-SPRING | |
19. | 2M-0849 | [12] | WASHER-HARD (13.5X25.5X5-MM THK) | |
20. | 2S-0115 | [28] | WASHER-HARD (20X36.5X5-MM THK) | |
21. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
22. | 320-6751 | [12] | BOLT-SELF-LOCKING (3/4-10X3.5-IN) | |
23. | 4V-4885 | [2] | BEARING-THRUST | |
24. | 5P-2861 | [1] | SEAL-O-RING | |
25. | 165-4929 | [1] | PLUG AS-MAGNETIC | |
5P-4484 | [1] | PLUG-MAGNETIC | ||
7M-8485 | [1] | SEAL-O-RING | ||
26. | 6M-1622 | [2] | DOWEL | |
28. | 9H-1031 | [16] | WASHER-HARD (24X41.5X6-MM THK) | |
29. | 9M-2828 | [68] | WASHER-HARD (28X44.5X6-MM THK) | |
30. | 164-4180 | [1] | PLUG AS | |
9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
7M-8485 | [1] | SEAL-O-RING | ||
31. | 1D-4639 | [8] | BOLT (1-8X4-IN) | |
32. | 6V-6640 B | SEALANT | ||
B | USE AS REQUIRED | |||
M | METRIC PART |
#SEBP41400456
229-5371: BLOCK GP-HYDRAULIC
229-5371 BLOCK GP-HYDRAULIC -AXLE, FRONT
S/N H4C1-UP
PART OF 273-7400 LINES GP-AXLE OIL COOLER
S/N H4C1-UP
PART OF 273-7400 LINES GP-AXLE OIL COOLER
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 154-1924 | [1] | MANIFOLD | |
2. | 148-8324 K | [1] | CONNECTOR AS | |
3K-0360 | [1] | SEAL-O-RING | ||
6V-9746 | [1] | SEAL-O-RING | ||
6V-9874 | [1] | CONNECTOR (STRAIGHT) | ||
3. | 148-8407 | [1] | PLUG AS | |
3J-1907 | [1] | SEAL-O-RING | ||
9S-4191 | [1] | PLUG (9/16-18-THD) | ||
4. | 169-7394 | [1] | CONNECTOR AS | |
3K-0360 | [1] | SEAL-O-RING | ||
5K-9090 | [1] | SEAL-O-RING | ||
8C-3370 | [1] | CONNECTOR | ||
5. | 1P-4577 | [2] | FLANGE-HALF | |
6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
K | SEE MAST AR OR LIFT GP | |||
M | METRIC PART |
#SEBP41400457
229-5373: BLOCK GP-HYDRAULIC
229-5373 BLOCK GP-HYDRAULIC -AXLE, REAR
S/N H4C1-UP
PART OF 273-7400 LINES GP-AXLE OIL COOLER
S/N H4C1-UP
PART OF 273-7400 LINES GP-AXLE OIL COOLER
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 231-3805 | [1] | MANIFOLD | |
2. | 148-8324 | [1] | CONNECTOR AS | |
3K-0360 | [1] | SEAL-O-RING | ||
6V-9746 | [1] | SEAL-O-RING | ||
6V-9874 | [1] | CONNECTOR (STRAIGHT) | ||
3. | 148-8352 | [1] | ELBOW AS | |
5K-9090 | [1] | SEAL-O-RING | ||
6V-9854 | [1] | ELBOW (SWIVEL) | ||
4. | 148-8392 | [1] | ELBOW AS | |
6V-9746 | [1] | SEAL-O-RING | ||
6V-9853 | [1] | ELBOW | ||
5. | 148-8411 | [1] | PLUG AS | |
3K-0360 | [1] | SEAL-O-RING | ||
9S-4185 | [1] | PLUG (3/4-16-THD) | ||
6. | 169-7394 | [1] | CONNECTOR AS | |
3K-0360 | [1] | SEAL-O-RING | ||
5K-9090 | [1] | SEAL-O-RING | ||
8C-3370 | [1] | CONNECTOR | ||
7. | 1P-4577 | [2] | FLANGE-HALF | |
8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
9. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
M | METRIC PART |
#SEBP41400458
6Y-6967: CASE & PARTS GP-PLANETARY
6Y-6967 CASE & PARTS GP-PLANETARY
S/N K2K1-UP
PART OF 283-7702 TRANSMISSION AR
S/N K2K1-UP
PART OF 283-7702 TRANSMISSION AR
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 116-2012 | [1] | CASE AS-TRANSMISSION | |
6I-8490 | [1] | TUBE | ||
7M-5839 | [2] | PLUG-CUP | ||
2. | 0S-1608 | [10] | BOLT (3/8-16X3.75-IN) | |
3. | 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | |
4. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
5. | 8M-4992 | [2] | SEAL-O-RING | |
6. | 8E-7253 | [2] | SLEEVE | |
7. | 8M-8157 | [4] | SEAL-O-RING | |
8. | 0L-1351 | [14] | BOLT (3/8-16X0.875-IN) | |
9. | 8E-4929 | [1] | GASKET | |
10. | 8E-4928 | [1] | COVER | |
11. | 132-9875 | [1] | COVER AS | |
1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
12. | 8E-1717 | [2] | ADAPTER | |
13. | 132-9877 | [2] | ADAPTER | |
14. | 8E-7249 | [1] | GASKET | |
15. | 9X-8885 | [19] | BOLT (3/4-10X2.25-IN) | |
16. | 5P-8248 | [23] | WASHER-HARD (20X36.5X3.5-MM THK) | |
17. | 3B-2968 | [4] | BOLT (3/4-10X3.5-IN) | |
18. | 2P-8421 | [2] | ADAPTER-O-RING | |
19. | 3D-2824 | [1] | SEAL-O-RING | |
20. | 6V-0852 | [4] | CAP-DUST | |
21. | 6V-3965 | [4] | FITTING (QUICK DISCONNECT) | |
22. | 124-8149 | [1] | MANIFOLD | |
23. | 3J-1907 | [6] | SEAL-O-RING | |
24. | 4K-1388 | [2] | SEAL-O-RING | |
25. | 9S-1018 | [10] | WASHER (9.73X19.05X0.84-MM THK) | |
26. | 3S-0004 | [5] | WASHER (0.406X0.728X0.09-IN THK) | |
27. | 124-3019 | [3] | BRACKET AS | |
(EACH INCLUDES) | ||||
8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
28. | 147-3150 | [1] | ANGLE AS | |
8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
M | METRIC PART |
#SEBP41400459
283-7684: CASE GP-TRANSFER GEAR
283-7684 CASE GP-TRANSFER GEAR
S/N K2K1-UP
PART OF 283-7683 GEAR GP-OUTPUT TRANSFER
S/N K2K1-UP
PART OF 283-7683 GEAR GP-OUTPUT TRANSFER
Parts for your 992K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | CASE AS-TRANSFER GEAR | ||
1A-1460 | [5] | BOLT (1/2-13X2-IN) | ||
8M-8659 | [2] | DOWEL | ||
2. | 325-0117 | [1] | TUBE AS | |
3. | 7M-5839 | [1] | PLUG-CUP | |
4. | 6I-8055 | [1] | TUBE | |
5. | 5K-9107 | [1] | BOLT-LOCKING (3/8-16X0.75-IN) | |
6. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
7. | 2S-7010 | [1] | CLIP | |
8. | 115-9461 | [1] | TUBE |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Special Instruction
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of Cat<SUP>®</SUP> Detect Object Detection for 854G, 854K, 992G, 992K, and 993K {1408, 7347, 7348}
Installation of Cat® Detect Object Detection for 854G, 854K, 992G, 992K, and 993K {1408, 7347, 7348}
Installation of Cat® Detect Object Detection for 854G, 854K, 992G, 992K, and 993K {1408, 7347, 7348}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure For Replacing Coil, and Connector On 992K Wheel Loaders{1408, 1554, 5070, 7553}
Procedure For Replacing Coil, and Connector On 992K Wheel Loaders{1408, 1554, 5070, 7553}
Procedure For Replacing Coil, and Connector On 992K Wheel Loaders{1408, 1554, 5070, 7553}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for Mounting the Rear Radars On Certain Cat<SUP>®</SUP> Products {1408, 1439, 5660, 7347}
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into
Specifications
Pressure Sensor (Automatic Lubrication)
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System)
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System)
Liquid Level Sensor (Implement, Hydraulic Fan Tank) (Steering, Brake Tank)
992K Wheel Loader Electrohydraulic System
992K Wheel Loader Electrohydraulic System
Temperature Sensor (Implement, Hydraulic Fan Oil) (Steering, Brake Oil)
992K Wheel Loader Electrohydraulic System
992K Wheel Loader Electrohydraulic System
Pressure Switch (Steering Cooler Filter Bypass) (Steering Pump Case Drain Filter Bypass)
992K Wheel Loader and 854K
Wheel Dozer Steering System
992K Wheel Loader and 854K
Wheel Dozer Steering System
Pressure Sensor (Torque Converter Impeller Clutch Oil)
992K Wheel Loader and 854K
Wheel Dozer Power Train
992K Wheel Loader and 854K
Wheel Dozer Power Train
Relay
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Switches
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Circuit Breaker (Alarm)
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Circuit Breaker (Powered Stairway)
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
Service Letter-Asia
Systems Operation
General Information
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Powered Stairway System
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
Testing and Adjusting
Switch Status - Check
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Electrical Component and Connector Locations
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1795 FMI 03 Turbo #2 Outlet Pressure Sensor voltage above normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1795 FMI 04 Turbo #2 Outlet Pressure Sensor voltage below normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1795 FMI 10 Turbo #2 Outlet Pressure Sensor abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1796 FMI 03 Intake Manifold #2 Air Temperature Sensor voltage above normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 1796 FMI 04 Intake Manifold #2 Air Temperature Sensor voltage below normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0827 FMI 03 Left Exhaust Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0828 FMI 03 Right Exhaust Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0827 FMI 04 Left Exhaust Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0828 FMI 04 Right Exhaust Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0827 FMI 08 Left Exhaust Temperature signal abnormal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0828 FMI 08 Right Exhaust Temperature signal abnormal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Connector Locations
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
MID 082 - CID 0365 - FMI 04
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
CID 0298 FMI 03 Service Brake Pedal Switch : Voltage Above Normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0298 FMI 04 Service Brake Pedal Switch : Voltage Below Normal
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0267 FMI 03 Remote Shutdown Input open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
CID 0267 FMI 04 Remote Shutdown Input short to ground
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Product Link and VIMS 3G Software for 523, PLVIMS Modules Is Now Available for Certain Large Wheel Loaders {1408, 7490, 7606, 7610, 7620}
New Product Link and VIMS 3G Software for 523, PLVIMS Modules Is Now Available for Certain Large Wheel Loaders {1408, 7490, 7606, 7610, 7620}
New Product Link and VIMS 3G Software for 523, PLVIMS Modules Is Now Available for Certain Large Wheel Loaders {1408, 7490, 7606, 7610, 7620}