ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
CONNECTION GP
ELECTRONICS GP-ENGINE
SHUTOFF GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP41450430
5N-5692: ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6920 | [1] | BEARING-ROLLER | |
| 2. | 7N-7806 | [1] | COIL AS-FIELD | |
| 3. | 9G-5578 | [1] | STATOR AS (24-VOLT) | |
| 4. | 7N-7795 | [1] | COLLAR | |
| 5. | 7N-7810 | [1] | FRAME AS-DRIVE END | |
| 6. | 6V-2202 | [1] | BALL BEARING | |
| 7. | 9L-2140 | [1] | PLATE | |
| 8. | 7X-3353 | [4] | SCREW-HEX HEAD (10X24X19.05-MM) | |
| 9. | 7N-7800 | [1] | ROTOR AS | |
| 10. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 12. | 030-9612 | [5] | SCREW-FORMING (10-24X0.5-IN) | |
| 13. | 9L-2139 | [1] | WASHER-FELT (1.31X1.68X0.125-IN THK) | |
| 14. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 15. | 9S-2437 | [3] | SCREW-TAPPING (10-24X19.05-MM) | |
| 16. | 9L-2137 | [1] | RETAINER AS | |
| 17. | 8F-1434 | [4] | LOCKWASHER | |
| 18. | 7N-9024 | [4] | BOLT (10-24X2.5-IN) | |
| 19. | 7N-7805 | [1] | HOUSING | |
| 20. | 7N-7809 | [1] | PLATE | |
| 21. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 9B-7233 | [6] | LOCKWASHER | |
| 23. | 9L-6770 | [1] | CAP-DUST | |
| 25. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 26. | 7N-9023 | [2] | SCREW AS (8-32X26.9-MM) | |
| 27. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 28. | 6V-8377 | [4] | NUT (8-32-THD) | |
| 29. | 7N-7811 | [1] | CONNECTOR | |
| 30. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 31. | 9N-1202 | [1] | DIODE AS | |
| 33. | 7N-9021 | [1] | SCREW AS (8-32X1.34-IN) | |
| 7N-7796 | [1] | BUSHING-TERMINAL | ||
| 34. | 7N-7802 | [1] | CAPACITOR AS | |
| 35. | 7N-7798 | [1] | CONNECTOR | |
| 36. | 7N-7801 | [1] | CONNECTOR | |
| 37. | 9S-2544 | [2] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 38. | 1H-3244 | [1] | LOCKWASHER | |
| 39. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 40. | 206-4202 | [1] | RECTIFIER AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7N-7807 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| INCLUDES INSULATOR, SCREWS, WASHERS, LOCKWASHERS, NUTS & ADAPTERS | ||||
| 7N-7808 | [1] | KIT-RELAY TERMINAL (ALTERNATOR) | ||
| INCLUDES STUDS, BUSHINGS, WASHERS & NUT ASSEMBLY | ||||
#SEBP41450431
5N-5692: ALTERNATOR GP-CHARGING
For full view, you need register
#SEBP41450432
7W-0825: CABLE GP-BATTERY
7W-0825 CABLE GP-BATTERY
PROVIDES POSITIVE & NEGATIVE CABLE 1879 MM ( 47 IN) LONG
AN ATTACHMENT
PROVIDES POSITIVE & NEGATIVE CABLE 1879 MM ( 47 IN) LONG
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-1715 | [1] | CABLE AS | |
| 2. | 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 3. | 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 4. | 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |
| 5. | 3V-6785 | [1] | CABLE AS | |
| 5P-0761 BE | CABLE (00-GA, RED) | |||
| 6. | 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7. | 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |
| 8. | 7N-5274 | [1] | COVER AS-TERMINAL (BLACK)(BATTERY) | |
| 9. | 8N-0869 | [1] | COVER-TERMINAL (RED)(RING) | |
| 10. | 8N-1725 | [1] | COVER AS-TERMINAL (RED)(BATTERY) | |
| 11. | 9G-8909 | [1] | COVER-TERMINAL (BLACK)(RING) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP41450433
200-2310: CONNECTION GP-ELECTRICAL
200-2310 CONNECTION GP-ELECTRICAL
PROVIDES PARTS FOR THROTTLE SENSOR CONNECTION
AN ATTACHMENT
PROVIDES PARTS FOR THROTTLE SENSOR CONNECTION
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-0969 | [1] | CONNECTOR-SOCKET (16-GA TO 18-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [36] | PLUG-SEAL | ||
| 8T-8732 | [1] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| M | METRIC PART | |||
#SEBP41450434
240-6054: CONNECTION GP-ELECTRICAL
240-6054 CONNECTION GP-ELECTRICAL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8732 J | [1] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8737 L | [66] | PLUG-SEAL | ||
| 9W-0844 L | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 133-0969 L | [1] | CONNECTOR-SOCKET (16-GA TO 18-GA) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA)(16-GA TO 18-GA WIRE) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA)(14-GA WIRE) | ||
| 194-5226 J | [1] | WIRE AS (16-GA)(THROTTLE POSITION) | ||
| -OR- | ||||
| 194-5227 J | [1] | WIRE AS (14-GA)(THROTTLE POSITION) | ||
| 194-5226 L | [1] | WIRE AS (16-GA)(CUSTOMER CONNECTOR) | ||
| -OR- | ||||
| 194-5227 L | [1] | WIRE AS (14-GA)(CUSTOMER CONNECTOR) | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| 8C-3334 S | [2] | RIVET-TUBULAR | ||
| 8C-6354 S | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8736 S | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8737 S | [2] | PLUG-SEAL | ||
| 9W-0852 S | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 133-0967 S | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| J | FOR THROTTLE POSITION SENSOR CONNECTION | |||
| L | FOR CUSTOMER CONNECTOR (70-PIN) | |||
| S | CAT SERVICE TOOL | |||
#SEBP41450435
231-1972: CONTROL & MTG GP-ENGINE ELEK
231-1972 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL | |
| 3. | 143-9392 M | [1] | STUD (M8X1.25-THD) | |
| 4. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 233-0891 | [1] | BRACKET AS | |
| 7. | 6V-9804 M | [3] | BOLT (M8X1.25X75-MM) | |
| 8. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41450436
241-7597: CONTROL & MTG GP-ENGINE ELEK
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL | |
| 3. | 143-9392 M | [3] | STUD (M8X1.25-THD) | |
| 4. | 226-7475 | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 5. | 233-0891 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 6. | 5P-8347 M | [1] | BOLT (M8X1.25X70-MM) | |
| 7. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
#SEBP41450437
246-9345: CONTROL & MTG GP-ENGINE ELEK
246-9345 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL (12.7X26X28.7-MM THK) | |
| 3. | 143-9392 M | [4] | STUD (M8X1.25-THD) | |
| 4. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 5. | 206-6875 | [4] | CAP-TUBE | |
| 6. | 244-3168 | [1] | BRACKET AS (HARNESS) | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 7. | 233-0891 | [1] | BRACKET AS (HARNESS) | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 8. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41450438
246-9365: CONTROL & MTG GP-ENGINE ELEK
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL | |
| 3. | 143-9392 M | [4] | STUD (M8X1.25-THD) | |
| 4. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 233-0891 | [1] | BRACKET AS | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 7. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41450439
195-1345: CONTROL GP-AUTO START/STOP
195-1345 CONTROL GP-AUTO START/STOP
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-1494 | [1] | KIT-SERVICE METER (24-VOLT)(INSTRUMENT PANEL) | |
| (INCLUDES SERVICE METER & SERVICE FILM) | ||||
| 2. | 111-1325 | [1] | BLOCK-CONTACT (2-POLE) | |
| 3. | 109-6507 | [1] | SWITCH AS-PUSH BUTTON (SECONDARY STOP) | |
| 4. | 3E-0156 | [1] | SWITCH GP-START (IGNITION) | |
| 6V-8362 | [1] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 9B-7233 | [1] | LOCKWASHER | ||
| 5. | 2N-2371 | [1] | LAMP AS-INDICATOR (RED) | |
| 2V-7088 | [1] | LENS-RED (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 6. | 6T-3643 | [2] | CIRCUIT BREAKER AS (15-AMPERE) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 7. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR) | |
| 9. | 195-1344 | [1] | HARNESS AS-WIRING (AUTO START/STOP CONTROL) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 3K-9520 | [1] | GROMMET | |
| 11. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 13. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 14. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY)(SPEED CONTROL) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 15. | 137-2133 | [1] | PLATE | |
| 16. | 137-2113 | [1] | ENCLOSURE | |
| 17. | 5P-8500 | [1] | KEY (IGNITION) | |
| 18. | 137-5135 | [2] | BRACKET | |
| 19. | 9F-8125 | [8] | LOCKWASHER | |
| 20. | 4B-1237 | [8] | SCREW-MACHINE (10-32X12.7-MM) | |
| 21. | 3E-8035 | [4] | SCREW-MACHINE | |
| 22. | 7N-5876 | [2] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 23. | 141-9228 | [1] | LAMP AS (INDICATOR) | |
| 2V-7087 | [1] | LENS-AMBER (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 24. | 142-2245 | [1] | FILM-CONTROL PANEL | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Special Instruction
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
Specifications
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
