FUEL SYSTEM
CONTROL GP-GOVERNORGOVERNOR GP
LINES GP-FUEL
PUMP GP-FUEL INJECTION
FUEL SYSTEM
CONTROL GP-GOVERNOR
#SEBP41550050
354-8147: CONTROL AR-GOVERNOR
354-8147 CONTROL AR-GOVERNOR
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP41550051
354-8148: CONTROL AR-GOVERNOR
354-8148 CONTROL AR-GOVERNOR -WITH TRAVEL ALARM
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP41550052
345-1563: CONTROL GP-GOVERNOR
345-1563 CONTROL GP-GOVERNOR
PART OF 354-8147, 354-8148 CONTROL AR-GOVERNOR
AN ATTACHMENT
PART OF 354-8147, 354-8148 CONTROL AR-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 5. | 266-7379 | [1] | STRAP-CABLE | |
| 6. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 302-8529 | [1] | MOTOR AS-GOVERNOR | |
| 9. | 355-1894 | [1] | PLATE | |
| 10. | 355-7769 | [1] | PLATE | |
| 11. | 355-7770 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 12. | 273-9459 | [1] | WIRE AS | |
| 13. | 4P-7581 | [1] | CLIP (LADDER) | |
| 14. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 15. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 16. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 17. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4138 M | [5] | BOLT (M6X1X20-MM) | |
| 20. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 21. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP41550053
354-8110: CONTROL GP-GOVERNOR
354-8110 CONTROL GP-GOVERNOR -AUTOMATIC IDLE
PART OF 344-8133, 345-1445 CONTROL AR-GOVERNOR
AN ATTACHMENT
PART OF 344-8133, 345-1445 CONTROL AR-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 7I-2673 | [2] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 5. | 266-7379 | [2] | STRAP-CABLE | |
| 6. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 292-6666 | [1] | SWITCH AS-ROCKER (AUTOMATIC ENGINE SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 302-8529 | [1] | MOTOR AS-GOVERNOR (ENGINE SPEED) | |
| 10. | 349-1812 | [1] | SWITCH AS-PRESSURE (PILOT OIL) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 108-7516 | [1] | FITTING | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 11. | 355-1894 | [1] | PLATE | |
| 12. | 355-7769 | [1] | PLATE | |
| 13. | 355-7770 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 14. | 362-3225 | [1] | SWITCH AS-PRESSURE (PILOT, TRAVEL) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 15. | 3J-1907 | [1] | SEAL-O-RING | |
| 16. | 4P-7581 | [1] | CLIP (LADDER) | |
| 17. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 18. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 19. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 20. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4138 M | [5] | BOLT (M6X1X20-MM) | |
| 23. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 24. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP41550054
317-7728: GOVERNOR GP
317-7728 GOVERNOR GP
PART OF 283-4111 PUMP AS-FUEL INJECTION
PART OF 283-4111 PUMP AS-FUEL INJECTION
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-4748 | [2] | PLUG | |
| 2. | 118-4750 | [1] | NUT | |
| 3. | 118-4770 | [2] | BUSHING | |
| 4. | 118-4771 | [2] | SEAL-O-RING | |
| 5. | 118-4790 | [4] | BOLT | |
| 6. | 118-4791 | [2] | BOLT | |
| 7. | 118-4792 | [1] | SEAL | |
| 8. | 118-4794 | [1] | BOLT | |
| 9. | 118-4795 | [1] | CAP | |
| 10. | 118-4797 | [3] | NUT | |
| 11. | 118-4798 | [3] | BOLT | |
| 12. | 118-4801 | [1] | BOLT | |
| 13. | 118-4802 | [1] | PLUG | |
| 14. | 118-4805 | [1] | WASHER | |
| 15. | 118-4808 | [1] | SEAL-O-RING | |
| 16. | 118-4830 | [1] | PLATE | |
| 17. | 112-0192 | [3] | BOLT | |
| 18. | 131-7844 | [1] | LEVER AS | |
| 19. | 131-7846 | [1] | COVER | |
| 20. | 136-9519 | [1] | WASHER-SPECIAL | |
| 21. | 136-9521 | [1] | BUSHING | |
| 22. | 315-4583 | [1] | LEVER | |
| 23. | 315-4628 | [1] | KIT-SOLENOID |
#SEBP41550055
283-1306: LINES GP-FUEL
283-1306 LINES GP-FUEL
PART OF 311-8446 ENGINE AR-PRIMARY
PART OF 311-8446 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-8948 | [2] | CLAMP | |
| 2. | 122-8949 | [2] | CLAMP | |
| 3. | 139-7818 | [3] | GASKET | |
| 4. | 139-7817 | [3] | GASKET | |
| 5. | 139-7816 | [3] | NUT (M12X1.25-THD) | |
| 6. | 199-2298 | [2] | BOLT AS | |
| (EACH INCLUDES) | ||||
| 6A. | 2U-2552 | [1] | LOCKWASHER | |
| 6B. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 6C. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 7. | 283-1307 | [1] | TUBE AS (LEAK OFF) | |
| 8. | 280-3777 | [1] | TUBE AS-INJECTION | |
| 9. | 280-3778 | [1] | TUBE AS-INJECTION | |
| 10. | 280-3779 | [1] | TUBE AS-INJECTION | |
| 11. | 283-1308 | [1] | TUBE AS-RETURN | |
| 12. | 280-3782 | [3] | NOZZLE-INJECTION | |
| 13. | 280-3783 | [1] | LINE AS-FUEL | |
| M | METRIC PART | |||
#SEBP41550056
345-2125: LINES GP-FUEL FILTER
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [8] | CLAMP-HOSE | |
| 2. | 096-6079 B | TAPE (WHITE) | ||
| 3. | 164-6874 | [2] | FITTING AS-ELBOW (QUICK DISCONNECT, MALE) | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 085-7356 | [1] | FITTING | ||
| 4. | 165-7951 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 157-1669 | [1] | CONNECTOR | ||
| 6. | 312-1699 Y | [1] | SEPARATOR GP-WATER (PRIMARY FUEL FILTER) | |
| 7. | 355-4013 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 148-8407 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 9. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 10. | 5K-8451 | [1] | CLIP (LOOP) | |
| 11. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 16. | 9N-2061 | [1] | CLIP | |
| 17. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 18. | 7I-7439 E | GUARD-HOSE (36-CM) | ||
| 18A. | 7I-7439 E | GUARD-HOSE (32-CM) | ||
| 18B. | 7I-7439 E | GUARD-HOSE (24-CM EACH) | ||
| 18C. | 7I-7439 E | GUARD-HOSE (21-CM) | ||
| 18D. | 7I-7439 E | GUARD-HOSE (41-CM) | ||
| 19. | 8C-6959 E | HOSE (23-CM) | ||
| 20. | 5P-1420 E | HOSE (77-CM) | ||
| 20A. | 5P-1420 E | HOSE (77.5-CM) | ||
| 20B. | 5P-1420 E | HOSE (111-CM) | ||
| 20C. | 5P-1420 E | HOSE (121-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41550057
345-2125: LINES GP-FUEL FILTER
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [8] | CLAMP-HOSE | |
| 2. | 096-6079 B | TAPE (WHITE) | ||
| 3. | 164-6874 | [2] | FITTING AS-ELBOW (QUICK DISCONNECT, MALE) | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 085-7356 | [1] | FITTING | ||
| 4. | 165-7951 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 157-1669 | [1] | CONNECTOR | ||
| 6. | 312-1699 Y | [1] | SEPARATOR GP-WATER (PRIMARY FUEL FILTER) | |
| 7. | 364-5522 C | [1] | BRACKET AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 148-8407 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 10. | 5K-8451 | [1] | CLIP (LOOP) | |
| 11. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 18. | 7I-7439 CE | GUARD-HOSE (36-CM) | ||
| 18A. | 7I-7439 E | GUARD-HOSE (34-CM) | ||
| 18B. | 7I-7439 E | GUARD-HOSE (24-CM EACH) | ||
| 18C. | 7I-7439 E | GUARD-HOSE (21-CM) | ||
| 18D. | 7I-7439 E | GUARD-HOSE (43-CM) | ||
| 18E. | 7I-7439 E | GUARD-HOSE (15-CM EACH) | ||
| 19. | 8C-6959 CE | HOSE (25-CM) | ||
| 20. | 423-1981 CG | HOSE (31.1-IN) | ||
| 20A. | 423-1981 G | HOSE (30.5-IN) | ||
| 20B. | 423-1981 G | HOSE (43.7-IN) | ||
| 20C. | 423-1981 G | HOSE (48.4-IN) | ||
| 21. | 279-4732 | [1] | STRAP-CABLE (YELLOW) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41550058
283-4111: PUMP AS-FUEL INJECTION
283-4111 PUMP AS-FUEL INJECTION
PART OF 283-3183 PUMP GP-FUEL INJECTION
PART OF 283-3183 PUMP GP-FUEL INJECTION
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP41550059
317-7727: PUMP AS-FUEL INJECTION
317-7727 PUMP AS-FUEL INJECTION
PART OF 283-4111 PUMP AS-FUEL INJECTION
PART OF 283-4111 PUMP AS-FUEL INJECTION
For full view, you need register
Parts for your 304D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-3741 | [3] | STUD | |
| 2. | 118-3745 | [3] | GASKET | |
| 3. | 118-3760 | [3] | PLUG | |
| 4. | 118-3777 | [1] | SCREW | |
| 5. | 118-3781 | [2] | PACKING | |
| 6. | 118-3812 | [3] | NUT | |
| 7. | 118-3814 | [3] | WASHER | |
| 8. | 118-3815 | [2] | BEARING | |
| 9. | 118-3816 | [1] | SEAL-O-RING | |
| 10. | 118-3824 | [2] | WASHER | |
| 11. | 118-3825 | [3] | SEAL-O-RING | |
| 12. | 196-8346 | [1] | SCREW | |
| 13. | 315-4539 | [2] | WASHER | |
| 14. | 139-8255 | [3] | HOLDER | |
| 15. | 315-6491 | [3] | SPRING | |
| 16. | 146-1983 | [3] | VALVE | |
| 17. | 315-6494 | [3] | FILTER ELEMENT-FUEL | |
| 18. | 315-6505 | [1] | COVER-BEARING | |
| 19. | 315-6506 | [1] | GASKET | |
| 20. | 315-6511 | [2] | WASHER | |
| 21. | 315-6519 | [4] | BOLT | |
| 22. | 317-8425 | [1] | GASKET | |
| 23. | 317-8426 | [1] | COVER | |
| 24. | 317-8427 | [1] | SCREW-HOLLOW | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
Information:
FUEL SYSTEM
CONTROL GP-GOVERNOR
Specifications
Caterpillar Parts SIS Catalog 304D CR :
Truck sale:
59.500
43.200