AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

258-0807 WIRING GP-ELECTRONIC CONTROL S/N CPT1-UP PART OF 254-2128, 254-2236, 295-9747 ENGINE AR-PRIMARY AN ATTACHMENT 930G


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 930G WHEEL LOADER TFW
 930G Wheel Loader TFW00001-UP (MACHINE) POWERED BY 3056E Engine SEBP4157 930G TFW   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAMERA
256-7270 WIRING GP-CAMERA
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
 

#SEBP41570190
 

258-0807: WIRING GP-ELECTRONIC CONTROL

258-0807 WIRING GP-ELECTRONIC CONTROL
S/N CPT1-UP
PART OF 254-2128, 254-2236, 295-9747 ENGINE AR-PRIMARY
AN ATTACHMENT
i02186777 SEBP4157
2580807 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4458 M [3] BOLT (M8X1.25X14-MM)  
2. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
3. 128-4249 [1] LOCKWASHER  
4. 140-8783 M [1] BOLT (M10X1.5X45-MM)  
5. 211-0052 [1] NUT (1-11/16-18-THD)  
6. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
7. 217-8477 [4] CLIP  
8. 217-9038 [3] BOLT (M4X0.7X14-MM)  
10. 226-8778 [1] BRACKET  
11. 226-8780 [1] BRACKET  
12. 228-7477 [1] CLIP  
13. 255-3454 [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
14. 258-0806 [1] PLATE  
  M   METRIC PART
 

#SEBP41570191
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N TFW1-629
PART OF 235-6844 CHASSIS AR
i02284088 SEBP4157
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(START AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(HEADLIGHT)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 C [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [3] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 BE CABLE (2-GA, RED)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 226-5923 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
21. 236-4236 C [1] HARNESS AS-ENGINE  
  8C-3056 E CABLE (2-GA, RED)(164-CM)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  180-9339 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [21] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [4] SEAL-CONNECTOR  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0844 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  7T-0094 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  124-5640 [2] TERMINAL-SOCKET  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  [1] TERMINAL AS  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
22. 251-6182 C [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 C [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-0269 CM [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 C [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41570192
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N TFW630-657
PART OF 235-6844 CHASSIS AR
i02661700 SEBP4157
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 8T-8737 C [2] PLUG-SEAL  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [6] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20-CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 282-9931 C [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 [1] HARNESS AS-ENGINE  
  8C-3056 E CABLE (2-GA, RED)(164-CM)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [21] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [4] SEAL-CONNECTOR  
  7T-0094 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  9W-0844 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  124-5640 [2] TERMINAL-SOCKET  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  281-4546 [1] TERMINAL-BLADE  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
22. 251-6182 [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 C [3] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 C [9] CLIP (LADDER)(LADDER)  
31. 4P-8134 [5] CLIP (LADDER)(LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-4138 CM [1] BOLT (M6X1X20-MM)  
35. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 CM [2] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 116-6161 BC [1] CAP-CONNECTOR  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 C [1] CLIP (LOOP)  
53. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
54. 102-8802 C [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
55. 3S-2093 C [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41570193
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N TFW658-UP
PART OF 235-6844 CHASSIS AR
i02665301 SEBP4157
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 C [22] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8799 [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 [6] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20-CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 282-9931 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 [1] HARNESS AS-ENGINE  
  8C-3056 E CABLE (2-GA, RED)(164-CM)  
  100-6674 [4] SEAL-CONNECTOR (20-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  304-1137 [1] HARNESS AS-PUMP  
  113-8492 [1] FUSE (20-AMPERE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  141-8061 B TAPE  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8L-8413 [5] STRAP-CABLE (WHITE)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
22. 251-6182 [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [3] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [9] CLIP (LADDER)  
31. 4P-8134 C [6] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-4138 M [1] BOLT (M6X1X20-MM)  
35. 8T-4121 C [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
38. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 304-4008 C [1] TAG-IDENTIFICATION (EMERGENCY STOP)  
42. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 116-6161 B [1] CAP-CONNECTOR  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 C [7] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [1] CLIP (LOOP)  
53. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
54. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
55. 3S-2093 C [13] STRAP-CABLE  
56. 8T-8737 [2] PLUG-SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41570194
 

235-6822: WIRING GP-FRONT

235-6822 WIRING GP-FRONT
S/N TFW1-UP
PART OF 235-6844 CHASSIS AR
i02252405 SEBP4157
2356822 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
3. 238-0077 [1] HARNESS AS-FRONT CHASSIS  
4. 245-8145 [4] BLOCK  
5. 246-2228 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
6. 246-2230 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 252-8958 [2] PLATE  
8. 4P-7581 [3] CLIP (LADDER)  
9. 7X-2534 M [4] BOLT (M6X1X50-MM)  
10. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
12. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP41570195
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N TFW1-392
PART OF 235-6844 CHASSIS AR
i01814226 SEBP4157
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  144-1636 [25] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  225-3854 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [30] PLUG-SEAL  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  126-1768 [28] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
4. 132-5789 [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 M [8] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
13. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
   
  8T-4224 F [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP41570196
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N TFW393-UP
PART OF 235-6844 CHASSIS AR
i02484396 SEBP4157
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  144-1636 [25] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  225-3854 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [30] PLUG-SEAL  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  126-1768 [28] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
4. 132-5789 C [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECETACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 CM [5] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 C [5] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
13. 1B-0676 C [1] PIN  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 281-5619 C [1] ROD  
16. 279-7127 C [1] BRACKET  
17. 195-1141 C [1] SPACER (7.2X18X11-MM THK)  
18. 179-8235 C [1] LOCK PIN  
19. 8T-4971 CM [3] BOLT (M6X1X30-MM)  
20. 8T-4908 CM [1] BOLT (M8X1.25X25-MM)  
21. 8T-4815 C [1] ROD END  
22. 8T-4133 CM [1] NUT (M10X1.5-THD)  
23. 5P-4116 C [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP41570197
 

215-2887: WIRING GP-RIDE CONTROL

215-2887 WIRING GP-RIDE CONTROL
S/N TFW1-UP
PART OF 203-8554 CONTROL AR-RIDE
Type 1
AN ATTACHMENT
i01829338 SEBP4157
2152887 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
2. 7K-1181 [7] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL/LOAD CHECK RELAY)  
5. 171-6029 [1] HARNESS AS-RIDE CONTROL (SOLENOID VALVE)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
7. 217-6729 [1] HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 4P-7581 [2] CLIP (LADDER)  
9. 4P-8134 [1] CLIP (LADDER)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
11. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP41570198
 

215-2887: WIRING GP-RIDE CONTROL

215-2887 WIRING GP-RIDE CONTROL
S/N TFW1-UP
PART OF 203-8554 CONTROL AR-RIDE
Type 2
AN ATTACHMENT
i02668657 SEBP4157
2152887 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
2. 7K-1181 C [10] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL/LOAD CHECK RELAY)  
5. 171-6029 [1] HARNESS AS-RIDE CONTROL (SOLENOID VALVE)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
7. 217-6729 [1] HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 4P-7581 [3] CLIP (LADDER)  
9. 8T-4138 M [1] BOLT (M6X1X20-MM)  
10. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP41570199
 

253-7792: WIRING GP-RIDE CONTROL

253-7792 WIRING GP-RIDE CONTROL
S/N TFW1-UP
PART OF 241-5665 CONTROL AR-RIDE
AN ATTACHMENT
i02272927 SEBP4157
2537792 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 930G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
2. 7K-1181 [10] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
5. 171-6029 [1] HARNESS AS-RIDE CONTROL (SOLENOID VALVE)  
6. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
7. 217-6729 [1] HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)  
9. 4P-8134 [1] CLIP (LADDER)  
10. 8T-4171 M [1] BOLT (M6X1X12-MM)  
11. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 930G :

WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-CAMERA
256-7270 WIRING GP-CAMERA
WIRING GP-CAMERA
256-7269 WIRING GP-CAMERA
WIRING GP-CAB
238-8387 WIRING GP-CAB
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-CAB
190-4330 WIRING GP-CAB
WIRING GP-ALTERNATOR
252-4991 WIRING GP-ALTERNATOR
WIRING GP-ALTERNATOR
252-4990 WIRING GP-ALTERNATOR
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
235-6822 WIRING GP-FRONT
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-RIDE CONTROL
215-2887 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
215-2887 WIRING GP-RIDE CONTROL

Truck sale:

Caterpillar 930G
 
Caterpillar 930G
- Wheel Loaders
MICHIGAN CAT
 
34,149 
Caterpillar 930G, Wheel Loaders, Construction
- Wheel Loaders
ZEPPELIN BAUMASCHINEN
Caterpillar 930G, Wheel Loaders, Construction
40,609 
Caterpillar 930G, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
 
46,500 
Caterpillar 930G, Wheel Loaders, Construction


 
 
Caterpillar 930G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.