168-3254 LINES GP-FUEL S/N DJN1-UP FOR USE WITH @@@@@169-2153@@@@@, @@@@@169-2154@@@@@, SINGLE WALL INTEGRAL FUEL TANK BASE AN ATTACHMENT 3412C

168-3254 LINES GP-FUEL
S/N DJN1-UP
FOR USE WITH @@@@@169-2153@@@@@, @@@@@169-2154@@@@@, SINGLE WALL INTEGRAL FUEL TANK BASE
AN ATTACHMENT

i01316562 SEBP4174

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	8M-0755	[1]	ADAPTER
2.	168-3258 I	[1]	HOSE AS
3.	9P-1347 I	[1]	HOSE AS
4.	8L-2786	[1]	SEAL-O-RING
5.	8M-0505	[1]	ADAPTER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP41740291

169-2142: LINES GP-FUEL

169-2142 LINES GP-FUEL
S/N DJN1-UP
GRAVITY FEED, REQUIRES CUSTOMER TO PROVIDE AN OVER FLOW AND RETURN LINE WITH A CONTINUOUS RISE
FOR USE WITH @@@@@169-2128@@@@@, @@@@@169-2153@@@@@, @@@@@169-2154@@@@@
CANNOT BE USED WITH @@@@@170-8429@@@@@
AN ATTACHMENT

i01317024 SEBP4174

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	169-2139 I	[1]	HOSE AS
2.	004-3099	[4]	CONNECTOR
3.	169-2136	[1]	STRAINER (FUEL)
4.	005-8615	[4]	NIPPLE-PIPE
5.	169-2140	[1]	VALVE AS-MANUAL (FUEL TANK-24 VOLT ELECTRONIC)
6.	3B-6555	[1]	ELBOW
7.	168-3285 I	[1]	HOSE AS
8.	4B-7770	[2]	TEE
9.	6V-7357 M	[2]	BOLT (M6X1X25-MM)
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	5P-4115	[4]	WASHER-HARD (7.2X19X2-MM THK)
12.	169-2130	[1]	VALVE AS-CHECK (FUEL TANK INLET/OUTLET)
13.	137-5552	[3]	PLUG-ADAPTER
14.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
15.	5C-7261 M	[2]	NUT (M8X1.25-THD)
16.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
17.	171-4535	[1]	BRACKET
19.	5R-9887	[1]	PLUG-PIPE
20.	3J-5390	[1]	PLUG (3/8-18-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP41740292

170-8426: LINES GP-FUEL

170-8426 LINES GP-FUEL
S/N DJN1-UP
FOR USE WITH @@@@@170-8405@@@@@, @@@@@170-8407@@@@@, STACK ON FUEL TANK BASE, DUAL WALL INTEGRAL FUEL TANK BASE
AN ATTACHMENT

i01316649 SEBP4174

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	8M-0755	[1]	ADAPTER
2.	170-8427 I	[1]	HOSE AS
3.	170-8428 I	[1]	HOSE AS
4.	8L-2786	[1]	SEAL-O-RING
5.	8M-0505	[1]	ADAPTER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP41740293

171-4490: LINES GP-FUEL

171-4490 LINES GP-FUEL
S/N DJN1-UP
GRAVITY FEED, REQUIRES CUSTOMER TO PROVIDE AN OVER FLOW AND RETURN LINE WITH A CONTINUOUS RISE
FOR USE WITH @@@@@170-8429@@@@@
CANNOT BE USED WITH @@@@@169-2128@@@@@
AN ATTACHMENT

i01317151 SEBP4174

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	171-4484 I	[1]	HOSE AS
2.	004-3099	[4]	CONNECTOR
3.	169-2136	[1]	STRAINER (FUEL)
4.	005-8615	[4]	NIPPLE-PIPE
5.	169-2140	[1]	VALVE AS-MANUAL (FUEL SHUTOFF)
6.	3B-6555	[1]	ELBOW
7.	168-3285 I	[1]	HOSE AS
8.	4B-7770	[2]	TEE
9.	6V-7357 M	[2]	BOLT (M6X1X25-MM)
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	5P-4115	[4]	WASHER-HARD (7.2X19X2-MM THK)
12.	169-2130	[1]	VALVE AS-CHECK (FUEL)
13.	137-5552	[3]	PLUG-ADAPTER
14.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
15.	5C-7261 M	[2]	NUT (M8X1.25-THD)
16.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
17.	171-4535	[1]	BRACKET
19.	5R-9887	[1]	PLUG-PIPE
20.	3J-5390	[1]	PLUG (3/8-18-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP41740294

180-5985: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

180-5985 LINES GP-FUEL FILTER
S/N 1EZ4389-UP
Type 1

i01315720 SEBP4174

1805985 LINES GP-FUEL FILTER Parts scheme

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	8S-2749	[1]	SUPPORT
2.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	8L-2786	[1]	SEAL-O-RING
4.	2P-7214	[2]	ADAPTER-ELBOW
5.	6V-5049	[9]	SEAL-O-RING
6.	7X-0290	[1]	BOLT (3/8-16X3.5-IN)
7.	2F-4967	[2]	SPACER (10.5X19X5.512-MM THK)
8.	0S-1591	[3]	BOLT (3/8-16X1.5-IN)
9.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
10.	9S-8752	[6]	NUT-FULL (3/8-16-THD)
11.	4D-7733	[1]	CLIP (LOOP)
12.	030-7947	[3]	ADAPTER-ELBOW
13.	9S-4191	[1]	PLUG (9/16-18-THD)
14.	9S-4182	[1]	PLUG (7/16-20-THD)
15.	9X-7378	[1]	SEAL-O-RING
16.	6N-4376 I	[1]	HOSE AS
17.	6N-8968 I	[1]	HOSE AS
18.	112-1108	[1]	BRACKET AS
19.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
20.	4B-4043	[4]	BOLT (5/8-11X1.375-IN)
21.	5S-7382	[1]	BOLT (3/8-16X1.375-IN)
22.	7E-5173 I	[1]	HOSE AS
23.	198-7287 I	[1]	HOSE AS
24.	6K-0806	[5]	STRAP-CABLE
25.	7D-7233	[3]	CLIP (LOOP)
26.	0S-1590	[2]	BOLT (3/8-16X2-IN)
27.	0S-1619	[1]	BOLT (3/8-16X3-IN)
28.	6M-6853	[1]	TEE-O-RING
29.	5C-6136 I	[1]	HOSE AS
30.	6K-9194	[1]	ELBOW
31.	4P-5970 I	[1]	HOSE AS
32.	4K-6297	[1]	ELBOW
33.	8M-0506	[1]	ADAPTER-O-RING
34.	053-0088	[1]	CONNECTOR
35.	1B-4971	[1]	SPACER (0.406X1X1-IN THK)
37.	005-4362	[1]	ELBOW
41.	9X-6458	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
42.	4D-7735	[2]	CLIP
43.	153-3450	[1]	BRACKET
44.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
45.	0L-1351	[1]	BOLT (3/8-16X0.875-IN)
46.	8M-2773	[1]	CLIP (LOOP)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP41740295

180-5985: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

180-5985 LINES GP-FUEL FILTER
S/N 1EZ4389-UP
Type 2

i03891071 SEBP4174

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	0S-0509 C	[1]	BOLT (3/8-16X0.75-IN)
2.	5M-2894 C	[17]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	8L-2786	[1]	SEAL-O-RING
4.	2P-7214	[2]	ADAPTER-ELBOW
5.	214-7568	[9]	SEAL-O-RING
6.	7X-0290	[1]	BOLT (3/8-16X3.5-IN)
7.	2F-4967	[2]	SPACER (10.5X19X5.512-MM THK)
8.	0S-1591	[3]	BOLT (3/8-16X1.5-IN)
9.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
10.	9S-8752 C	[8]	NUT-FULL (3/8-16-THD)
11.	4D-7733 C	[3]	CLIP (LOOP)
12.	030-7947	[3]	ADAPTER-ELBOW
13.	9S-4191	[1]	PLUG (9/16-18-THD)
14.	9S-4182	[1]	PLUG (7/16-20-THD)
15.	9X-7378	[1]	SEAL-O-RING
16.	6N-4376 I	[1]	HOSE AS
17.	6N-8968 I	[1]	HOSE AS
18.	112-1108	[1]	BRACKET AS
19.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
20.	4B-4043	[4]	BOLT (5/8-11X1.375-IN)
21.	5S-7382	[1]	BOLT (3/8-16X1.375-IN)
22.	7E-5173 I	[1]	HOSE AS
23.	198-7287 I	[1]	HOSE AS
24.	7K-1181 C	[2]	STRAP-CABLE
25.	7D-7233	[3]	CLIP (LOOP)
26.	0S-1590 C	[2]	BOLT (3/8-16X2-IN)
27.	8S-9191 C	[1]	BOLT (3/8-16X4-IN)
28.	6M-6853	[1]	TEE-O-RING
29.	5C-6136 I	[1]	HOSE AS
30.	6K-9194 C	[2]	ELBOW
31.	4P-5970 I	[1]	HOSE AS
32.	4K-6297	[1]	ELBOW
33.	8M-0506	[1]	ADAPTER-O-RING
34.	053-0088	[1]	CONNECTOR
35.	6B-6205 C	[1]	SPACER (0.438X0.875X1.281-IN THK)
36.	177-2215 C	[2]	STRAP-DUAL CLAMP
37.	005-4362	[1]	ELBOW
38.	8M-2773	[1]	CLIP (LOOP)
39.	0L-1351	[1]	BOLT (3/8-16X0.875-IN)
40.	030-7962 C	[1]	ELBOW
41.	9X-6458	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
42.	4D-7735 C	[1]	CLIP
43.	153-3450	[1]	BRACKET
44.	8S-2749	[1]	SUPPORT
45.	6S-9720 C	[1]	BRACKET
46.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
47.	0L-2070 C	[1]	BOLT (3/8-16X2.25-IN)
48.	7C-8246 C	[1]	SPACER (10.5X20X24-MM THK)
49.	1W-7999 C	[1]	BRACKET
50.	9U-2277 C	[1]	CLIP AS
51.	2S-3770 C	[1]	SPACER (11X19X33.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP41740296

4P-9484: LINES GP-FUEL INJECTION

4P-9484 LINES GP-FUEL INJECTION
S/N 1EZ4389-UP

i00373102 SEBP4174

4P9484 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	4P-9631 Y	[1]	LINES GP-FUEL INJECTION
2.	4P-9632 Y	[1]	LINES GP-FUEL INJECTION
3.	9Y-3969	[12]	LINE AS-FUEL INJECTION
			(EACH INCLUDES)
	8L-2779	[1]	SEAL-O-RING
4.	7W-2315	[12]	RETAINER
5.	130-1804	[12]	NOZZLE AS-FUEL INJECTION
			(EACH INCLUDES)
	9L-9098	[1]	SEAL-CARBON STOP
	4W-3917	[1]	CHECK-INJECTION VALVE
	7W-4487	[1]	WASHER-SPECIAL (9.76X17.14X1.27-MM THK)
	9X-2836	[1]	SCREW-BUTTON HEAD
	114-3362	[1]	SEAL-O-RING
	271-2489	[1]	SEAL-WASHER
6.	5B-1484	[12]	NUT (3/4-10-THD)
7.	5P-8119	[12]	SEAL-O-RING
8.	8T-9527	[1]	SEAL-O-RING
9.	1S-0004	[2]	SEAL-O-RING
10.	053-2294	[5]	BOLT-12 POINT HEAD (3/8-16X1.75-IN)
11.	4S-9002	[1]	BOLT-12 POINT HEAD (3/8-16X3-IN)
12.	9F-7022	[4]	BOLT (1/4-20X1.5-IN)
13.	5P-0537	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
14.	108-3964	[1]	TUBE AS
15.	5P-2645	[2]	ELBOW
16.	3J-7354	[2]	SEAL-O-RING
17.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
18.	2V-3216	[2]	CLIP (LOOP)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41740297

4P-9631: LINES GP-FUEL INJECTION

4P-9631 LINES GP-FUEL INJECTION
S/N 1EZ4389-UP
PART OF 4P-9484, 6I-3768 LINES GP-FUEL INJECTION

i00373415 SEBP4174

4P9631 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	111-4121 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 1)
2.	111-4123 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 3)
3.	111-4125 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 5)
4.	111-4127 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 7)
5.	111-4129 C	[1]	LINE AS-FUEL INJECTION (NO. 9)
6.	111-4131 C	[1]	LINE AS-FUEL INJECTION (NO. 11)
7.	112-7984 C	[1]	BRACKET AS
8.	1W-9168 C	[6]	CLAMP-FUEL LINE (NON-THREADED)
9.	1W-9169 C	[6]	CLAMP-FUEL LINE (THREADED)
10.	5P-4939 C	[12]	SCREW-MACHINE (10-24X15.88-IN)
11.	7C-6591 C	[6]	CLAMP-FUEL LINE (THREADED)
12.	7C-7747 C	[9]	CLAMP-FUEL LINE (NON-THREADED)
13.	7M-9910 C	[8]	SCREW-MACHINE (10-24X1-IN)
14.	4B-4274 C	[25]	WASHER (5.5X13X1.2-MM THK)
15.	4B-2047 C	[14]	NUT (10-24-THD)
16.	6I-0859 C	[4]	CLAMP-FUEL LINE
17.	6I-0884 C	[2]	CLAMP-FUEL LINE
18.	4P-8383	[1]	CLAMP AS-FUEL LINE
	7C-7747	[1]	CLAMP-FUEL LINE (NON-THREADED)
	7S-2412	[1]	ROD
19.	4P-8868 C	[3]	CLAMP-FUEL LINE
20.	104-3038 C	[3]	SCREW-MACHINE
21.	104-3039 C	[3]	SCREW AS
22.	107-8088 C	[1]	CLAMP AS
	4P-8868	[1]	CLAMP-FUEL LINE
	7S-2412	[1]	ROD
23.	110-5309 C	[1]	SPACER
24.	110-5310 C	[1]	SPACER (FUEL LINE)
25.	6I-0638	[1]	BRACKET AS
26.	120-9197	[1]	BRACKET AS
27.	4P-8567	[1]	BRACKET AS
	C		CHANGE FROM PREVIOUS TYPE

#SEBP41740298

4P-9632: LINES GP-FUEL INJECTION

4P-9632 LINES GP-FUEL INJECTION
S/N 1EZ4389-UP
PART OF 4P-9484, 6I-3768 LINES GP-FUEL INJECTION

i00373419 SEBP4174

4P9632 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3412C GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	111-4122 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 2)
2.	111-4124 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 4)
3.	111-4126 C	[1]	LINE AS-FUEL INJECTION (CYL NO. 6)
4.	111-4128 C	[1]	LINE AS-FUEL INJECTION (NO. 8)
5.	111-4130 C	[1]	LINE AS-FUEL INJECTION (NO. 10)
6.	111-4132 C	[1]	LINE AS-FUEL INJECTION (NO. 12)
7.	1W-9168 C	[10]	CLAMP-FUEL LINE (NON-THREADED)
8.	1W-9169 C	[10]	CLAMP-FUEL LINE (THREADED)
9.	5P-4939 C	[15]	SCREW-MACHINE (10-24X15.88-IN)
10.	7C-7747 C	[4]	CLAMP-FUEL LINE (NON-THREADED)
11.	7C-6591 C	[3]	CLAMP-FUEL LINE (THREADED)
12.	7M-9910 C	[4]	SCREW-MACHINE (10-24X1-IN)
13.	4B-4274 C	[21]	WASHER (5.5X13X1.2-MM THK)
14.	4B-2047 C	[12]	NUT (10-24-THD)
15.	4P-8383	[1]	CLAMP AS-FUEL LINE
	7C-7747	[1]	CLAMP-FUEL LINE (NON-THREADED)
	7S-2412	[1]	ROD
16.	6I-0859 C	[4]	CLAMP-FUEL LINE
17.	6I-0884 C	[2]	CLAMP-FUEL LINE
18.	112-7987 C	[1]	BRACKET AS
19.	4P-8868 C	[2]	CLAMP-FUEL LINE
20.	7C-6589 C	[1]	CLAMP-FUEL LINE (THREADED)
21.	6I-1107	[1]	CLAMP AS
	7C-6525	[1]	CLAMP-FUEL LINE (NON-THREADED)
	7S-2412	[1]	ROD
22.	104-3038 C	[5]	SCREW-MACHINE
23.	104-3039 C	[3]	SCREW AS
24.	107-8088 C	[1]	CLAMP AS
	4P-8868	[1]	CLAMP-FUEL LINE
	7S-2412	[1]	ROD
25.	107-8089 C	[1]	CLAMP AS
	4P-8868	[1]	CLAMP-FUEL LINE
	7S-2412	[1]	ROD
26.	110-5310 C	[1]	SPACER (FUEL LINE)
27.	110-5311 C	[1]	SPACER (FUEL LINE)
28.	120-6666	[1]	BRACKET AS
29.	6I-0636	[1]	BRACKET AS
	C		CHANGE FROM PREVIOUS TYPE

#SEBP41740299

6I-3768: LINES GP-FUEL INJECTION

6I-3768 LINES GP-FUEL INJECTION
S/N 1EZ4389-UP

i00397729 SEBP4174

6I3768 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3412C GENERATOR SET: