AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

469-9196 CARTRIDGE GP-TURBOCHARGER S/N BLG579-UP PART OF 471-2080 TURBOCHARGER GP 3412C GENERATOR SET


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-EXHAUST
MANIFOLD GP-EXHAUST
LINES GP-EXHAUST
LINES GP-AIR

GENERATOR SET 3412C GENERATOR SET TFT
 3412C Generator Set TFT00001-UP SEBP4175 3412C TFT   (2003)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
102-0292 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
119-8517 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
469-9196 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
4P-2785 CARTRIDGE GP-TURBOCHARGER
SHIELD GP-HEAT
6N-9091 SHIELD GP-HEAT
SHIELD GP-HEAT
9Y-9826 SHIELD GP-HEAT
 

#SEBP41750150
 

469-9196: CARTRIDGE GP-TURBOCHARGER

469-9196 CARTRIDGE GP-TURBOCHARGER
S/N BLG579-UP
PART OF 471-2080 TURBOCHARGER GP
i06921039 SEBP4175
4699196 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-1120 [1] RING-SEAL  
2. 211-2264 [1] RING-PISTON  
3. 496-5224 [2] BEARING-JOURNAL (STANDARD)  
  496-5225 AB BEARING-JOURNAL (0.25-MM US)  
  496-5226 AB BEARING-JOURNAL (0.25-MM OS)  
  496-5227 AB BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  496-5228 AB BEARING-JOURNAL (0.51-MM OS)  
  496-5229 AB BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
4. 211-2261 [1] BEARING-THRUST  
5. 223-4291 [1] COLLAR-THRUST  
6. 9M-8919 [1] RING-SEAL  
7. 461-3792 [3] WASHER (WEAR)  
8. 461-3728 [3] RING-RETAINING  
9. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
10. 4P-3819 M [4] BOLT (M6X1X22-MM)  
11. 4P-3818 M [3] BOLT (M4X0.7X10-MM)  
12. 126-0893 [1] PLATE-BACK  
13. 119-6004 [1] HOUSING-BEARING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41750151
 

4P-2785: CARTRIDGE GP-TURBOCHARGER

4P-2785 CARTRIDGE GP-TURBOCHARGER
S/N BLG579-UP
PART OF 4P-2784 TURBOCHARGER GP
i00374931 SEBP4175
4P2785 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-6523 [1] PLATE AS-BACKING  
2. 1P-1120 [1] RING-SEAL  
3. 4P-3817 [1] BEARING-THRUST  
4. 7N-6608 [1] RING-PISTON  
5. 4P-6527 [1] SHROUD  
6. 4P-6529 [1] SHAFT AS-TURBINE  
7. 9M-8915 [3] RING-RETAINING  
8. 4P-3821 [1] HOUSING-BEARING  
9. 4P-6528 [1] COLLAR-THRUST  
10. 4P-6524 [1] SPACER-THRUST  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 7E-0485 [1] WHEEL (COMPRESSOR)  
13. 4P-3819 M [4] BOLT (M6X1X22-MM)  
14. 4P-3818 M [3] BOLT (M4X0.7X10-MM)  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
  7C-7446 [1] KIT-BEARING (0.51-MM OS)  
  7C-7447 [1] KIT-BEARING (0.51-MM OS, 0.25-MM US)  
  7N-3194 [1] KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  8N-4158 [1] KIT-BEARING (0.13-MM OS)  
  8N-4160 [1] KIT-BEARING (0.25-MM US)  
  M   METRIC PART
 

#SEBP41750152
 

184-0840: ELBOW GP-EXHAUST

184-0840 ELBOW GP-EXHAUST
S/N TFT1-UP
10 INCH. REQUIRES 10 INCH INLET MUFFLER
FOR USE WITH 10 INCH EXHAUST FITTING(THROUGH THE WALL KIT), MUFFLER MOUNTING
AN ATTACHMENT
i01320558 SEBP4175
1840840 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-8404 [1] ELBOW AS  
  [2] FLANGE  
2. 149-2415 [4] GASKET  
3. 7X-2575 M [48] BOLT (M24X3X60-MM)  
4. 8T-4001 M [48] NUT (M24X3-THD)  
5. 8T-4167 [96] WASHER-HARD (26X44X4-MM THK)  
6. [2] FLANGE  
7. 8T-4131 M [8] NUT (M20X2.5-THD)  
8. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
9. 7X-2563 M [8] BOLT (M20X2.5X60-MM)  
10. 113-9848 [1] GASKET  
11. 169-2117 [1] ADAPTER AS  
  [1] FLANGE  
  M   METRIC PART
 

#SEBP41750153
 

148-5233: EXHAUST GP-FLEXIBLE

148-5233 EXHAUST GP-FLEXIBLE
S/N TFT1-UP
FLEXIBLE (8 IN)
AN ATTACHMENT
i01307792 SEBP4175
1485233 EXHAUST GP-FLEXIBLE Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-1009 [1] ADAPTER AS  
2. 5L-3773 [1] GASKET-EXHAUST ELBOW  
3. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
4. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 6V-8801 [8] NUT (3/8-16-THD)  
6. 8T-4131 M [8] NUT (M20X2.5-THD)  
7. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
8. 7X-2563 M [8] BOLT (M20X2.5X60-MM)  
9. 113-9848 [1] GASKET  
10. 145-4933 [1] FLANGE  
  M   METRIC PART
 

#SEBP41750154
 

150-4274: FASTENER GP-EXHAUST MANIFOLD

150-4274 FASTENER GP-EXHAUST MANIFOLD
S/N BLG579-UP
i01315162 SEBP4175
1504274 FASTENER GP-EXHAUST MANIFOLD Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4474 [4] BRACKET  
2. 114-9223 [8] SPACER (11.13X19.05X19-MM THK)  
 

#SEBP41750155
 

150-4275: FASTENER GP-EXHAUST MANIFOLD

150-4275 FASTENER GP-EXHAUST MANIFOLD
S/N BLG579-UP
i01315456 SEBP4175
1504275 FASTENER GP-EXHAUST MANIFOLD Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4474 [2] BRACKET  
2. 6B-2882 [4] SPACER (0.406X0.75X0.312-IN THK)  
3. 114-9223 [16] SPACER (11.13X19.05X19-MM THK)  
 

#SEBP41750156
 

170-8403: FITTING GP-EXHAUST

170-8403 FITTING GP-EXHAUST
S/N TFT1-UP
REQUIRES 10 IN RESIDENTIAL, INDUSTRIAL OR CRITICAL MUFFLER
AN ATTACHMENT
i01314341 SEBP4175
1708403 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-7933 [1] PLATE AS-EXHAUST  
2. [2] FLANGE  
3. 149-2415 [2] GASKET  
4. 170-8404 [1] ELBOW AS  
  [2] FLANGE  
5. 7X-2575 M [24] BOLT (M24X3X60-MM)  
6. 8T-4167 [48] WASHER-HARD (26X44X4-MM THK)  
7. 8T-4001 M [24] NUT (M24X3-THD)  
8. 126-3884 [1] CAP AS-RAIN (EXHAUST)  
9. 149-7932 [1] PLATE AS-EXHAUST  
  M   METRIC PART
 

#SEBP41750157
 

215-8147: FITTING GP-EXHAUST

215-8147 FITTING GP-EXHAUST
S/N TFT1-UP
8IN MOUNTING FLANGE
AN ATTACHMENT
i01747394 SEBP4175
2158147 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-1006 [1] ADAPTER AS  
2. 5L-3773 [1] GASKET-EXHAUST ELBOW  
3. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
4. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 6V-8801 [8] NUT (3/8-16-THD)  
6. 8T-4131 M [8] NUT (M20X2.5-THD)  
7. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
8. 7X-2563 M [8] BOLT (M20X2.5X60-MM)  
9. 113-9848 [1] GASKET  
10. 145-4933 [1] FLANGE  
  M   METRIC PART
 

#SEBP41750158
 

7E-0267: LINES GP-AIR

7E-0267 LINES GP-AIR
S/N BLG579-UP
i00396013 SEBP4175
7E0267 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7036 [1] ELBOW-EXHAUST  
2. 9Y-7024 [1] ELBOW-EXHAUST  
3. 6N-7152 [1] SUPPORT-ELBOW  
4. 9Y-7025 [1] ELBOW-EXHAUST  
5. 9Y-7058 [2] COUPLING-ELBOW  
6. 9Y-7557 [1] TUBE AS  
7. 9Y-7556 [1] TUBE AS  
8. 9Y-7026 [1] SUPPORT-ELBOW  
9. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
10. 4J-4382 [2] PLUG-PIPE  
11. 0S-1591 [10] BOLT (3/8-16X1.5-IN)  
12. 0S-1608 [2] BOLT (3/8-16X3.75-IN)  
13. 9S-8752 [9] NUT-FULL (3/8-16-THD)  
14. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
15. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
16. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
17. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
18. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
19. 2M-8411 [1] STUD-TAPERLOCK  
20. 9F-8999 [1] BOLT (3/8-16X7-IN)  
21. 6V-6353 [2] SEAL-O-RING  
22. 0L-1143 [4] BOLT (3/8-16X2.5-IN)  
23. 0S-1619 [4] BOLT (3/8-16X3-IN)  
24. 6N-6547 [1] SUPPORT (TIMING GEAR)  
25. 1A-2029 [10] BOLT (3/8-16X1.125-IN)  
26. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
27. 6V-3917 [16] SEAL-O-RING  
28. 5K-1770 [2] SEAL-O-RING  
29. 5L-9316 [4] CLAMP  
30. 9Y-6663 [2] COUPLING  
31. 9Y-7555 [1] TUBE AS  
32. 7E-4369 [6] SEAL AS-EXHAUST  
33. 4N-1010 [2] SUPPORT-ELBOW  
34. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
35. 6N-6546 [1] SUPPORT (TIMING GEAR)  
36. 9Y-7553 [1] TUBE AS-EXHAUST  
37. 9Y-7092 [2] COUPLING-EXHAUST  
38. 9Y-7080 [2] TUBE-AIR  
39. 9Y-7554 [1] TUBE AS  
40. 6V-5103 [4] SEAL-O-RING  
41. 9Y-7551 [1] TUBE AS  
42. 9Y-7045 [1] TUBE AS  
43. 9Y-7552 [1] TUBE AS-EXHAUST  
44. 7W-1944 [2] RETAINER  
45. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
 

#SEBP41750159
 

7E-3266: LINES GP-AIR

7E-3266 LINES GP-AIR
S/N BLG579-UP
i00402073 SEBP4175
7E3266 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-8432 [1] ELBOW-EXHAUST  
2. 122-8433 [1] ELBOW-EXHAUST  
3. 8N-0879 [4] CLAMP  
4. 6I-2855 [1] TUBE AS (EXHAUST RH)  
5. 133-2232 [1] TUBE AS (EXHAUST LH)  
6. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
7. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
8. 6N-7152 [1] SUPPORT-ELBOW  
9. 9Y-7026 [1] SUPPORT-ELBOW  
10. 6N-6733 [1] SUPPORT-HOUSING (LH)  
11. 6N-6734 [1] SUPPORT-HOUSING (RH)  
12. 1A-5183 [3] BOLT (3/8-16X4.75-IN)  
13. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
14. 150-8398 [2] COUPLING  
15. 7E-3682 [1] TUBE AS (LH)  
16. 7E-3681 [1] TUBE AS (RH)  
17. 6V-3917 [8] SEAL-O-RING  
18. 9Y-6663 [2] COUPLING  
19. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
20. 9Y-7025 [1] ELBOW-EXHAUST  
21. 0S-1591 [4] BOLT (3/8-16X1.5-IN)  
22. 2M-8411 [1] STUD-TAPERLOCK  
23. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
24. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
25. 8S-9191 [2] BOLT (3/8-16X4-IN)  
26. 0L-1143 [6] BOLT (3/8-16X2.5-IN)  
27. 9F-8999 [1] BOLT (3/8-16X7-IN)  
28. 0S-1619 [4] BOLT (3/8-16X3-IN)  
29. 3B-1915 [8] BOLT (3/8-16X1.375-IN)  
30. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 4J-4382 [2] PLUG-PIPE  
32. 6V-6353 [2] SEAL-O-RING  
 

Information:

Truck Engine News
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Magazine
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3412C :

CARTRIDGE GP-TURBOCHARGER
119-8517 CARTRIDGE GP-TURBOCHARGER
102-0292 CARTRIDGE GP-TURBOCHARGER
CAP-AIR CLEANER
4W-5828 CAP-AIR CLEANER
CAP AS-RAIN
7S-5003 CAP AS-RAIN
CAP AS-RAIN
6N-7611 CAP AS-RAIN
AIR CLEANER GP
2W-6183 AIR CLEANER GP
AIR CLEANER GP
1W-0744 AIR CLEANER GP
AIR CLEANER GP
168-3298 AIR CLEANER GP
CARTRIDGE GP-TURBOCHARGER
4P-2785 CARTRIDGE GP-TURBOCHARGER
ELBOW GP-EXHAUST
184-0840 ELBOW GP-EXHAUST
EXHAUST GP-FLEXIBLE
148-5233 EXHAUST GP-FLEXIBLE
FASTENER GP-EXHAUST MANIFOLD
150-4274 FASTENER GP-EXHAUST MANIFOLD
FASTENER GP-EXHAUST MANIFOLD
150-4275 FASTENER GP-EXHAUST MANIFOLD
FITTING GP-EXHAUST
170-8403 FITTING GP-EXHAUST
FITTING GP-EXHAUST
215-8147 FITTING GP-EXHAUST
LINES GP-AIR
7E-0267 LINES GP-AIR

Truck sale:

Caterpillar 3412C
 
Caterpillar 3412C
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
95,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
145,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
74,900 
Caterpillar 3412CEP, Stationary Generator Sets, Construction


Caterpillar 3412C
 
Caterpillar 3412C
- Marine Propulsion / Auxiliary Engines
HAWTHORNE POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.